SUPERMICROP-BRIDGE-MIB Table View

A table that contains information about every high
capacity port that is associated with this transparent
bridge.

fsDot1dTpHCPortEntry row .1.3.6.1.4.1.10876.101.1.116.4.5.1

Statistics information for each high capacity port of a
transparent bridge.

Indexes

SUPERMICRO-MIStdBRIDGE-MIBfsDot1dTpPort

Column	Syntax	OID
fsDot1dTpHCPortInFrames The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol bein…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10876.101.1.116.4.5.1.1
fsDot1dTpHCPortOutFrames The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol …	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10876.101.1.116.4.5.1.2
fsDot1dTpHCPortInDiscards Count of valid frames that have been received by this port from its segment which were discarded (i.e., filtered) by the Forwarding Process.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.10876.101.1.116.4.5.1.3

A table that contains the most-significant bits of
statistics counters for ports that are associated with this
transparent bridge that are on high capacity interfaces, as
defined in the conformance clauses for this table. This table
is provided as a way to read 64-bit counters for agents which
support only SNMPv1.
          
Note that the reporting of most-significant and
least-significant counter bits separately runs the risk of
missing an overflow of the lower bits in the interval between
sampling. The manager must be aware of this possibility, even
within the same varbindlist, when interpreting the results of
a request or asynchronous notification.

fsDot1dTpPortOverflowEntry row .1.3.6.1.4.1.10876.101.1.116.4.6.1

The most significant bits of statistics counters for a high
capacity interface of a transparent bridge. Each object is
associated with a corresponding object in fsDot1dTpPortTable
which indicates the least significant b…

Indexes

SUPERMICRO-MIStdBRIDGE-MIBfsDot1dTpPort

Column	Syntax	OID
fsDot1dTpPortInOverflowFrames The number of times the associated fsDot1dTpPortInFrames counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.116.4.6.1.1
fsDot1dTpPortOutOverflowFrames The number of times the associated fsDot1dTpPortOutFrames counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.116.4.6.1.2
fsDot1dTpPortInOverflowDiscards The number of times the associated fsDot1dTpPortInDiscards counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.116.4.6.1.3

List of fsDot1dExtBase group objects that can be configured per
virtual context in the system.

fsDot1dExtBaseEntry row .1.3.6.1.4.1.10876.101.1.116.6.1.1.1.1

fsDot1dExtBase group objects per virtual context.

Indexes

fsDot1dBridgeContextId

Column	Syntax	OID
fsDot1dBridgeContextId Identifies the virtual context.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.116.6.1.1.1.1.1
fsDot1dDeviceCapabilities Indicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in fsDot1dPortCapabilities.	Bits Enumerated Values: 0 dot1dExtendedFilteringServices 1 dot1dTrafficClasses 2 dot1qStaticEntryIndividualPort 3 dot1qIVLCapable 4 dot1qSVLCapable 5 dot1qHybridCapable 6 dot1qConfigurablePvidTagging 7 dot1dLocalVlanCapable	.1.3.6.1.4.1.10876.101.1.116.6.1.1.1.1.2
fsDot1dTrafficClassesEnabled The value true(1) indicates that Traffic Classes are enabled on this bridge. When false(2), the bridge operates with a single priority level for all traffic.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.116.6.1.1.1.1.3
fsDot1dGmrpStatus The administrative status requested by management for GMRP. The value enabled(1) indicates that GMRP should be enabled on this device, in all VLANs, on all ports for which it has not been specifically disabled. When d…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.116.6.1.1.1.1.4

A table that contains capabilities information about
every port that is associated with this bridge.

fsDot1dPortCapabilitiesEntry row .1.3.6.1.4.1.10876.101.1.116.6.1.1.2.1

A set of capabilities information about this port
indexed by fsDot1dBasePort.

Indexes

No indexes recorded

Column	Syntax	OID
fsDot1dPortCapabilities Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis that are implemented by this device and are manageable through this MIB.	Bits Enumerated Values: 0 dot1qDot1qTagging 1 dot1qConfigurableAcceptableFrameTypes 2 dot1qIngressFiltering	.1.3.6.1.4.1.10876.101.1.116.6.1.1.2.1.1

A table that contains information about every port that
is associated with this transparent bridge.

fsDot1dPortPriorityEntry row .1.3.6.1.4.1.10876.101.1.116.6.1.2.1.1

A list of Default User Priorities for each port of a
transparent bridge. This is indexed by fsDot1dBasePort.

Indexes

No indexes recorded

Column	Syntax	OID
fsDot1dPortDefaultUserPriority The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.116.6.1.2.1.1.1
fsDot1dPortNumTrafficClasses The number of egress traffic classes supported on this port. This object may optionally be read-only.	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.10876.101.1.116.6.1.2.1.1.2

A list of Regenerated User Priorities for each received
User Priority on each port of a bridge.  The Regenerated
User Priority value may be used to index the Traffic
Class Table for each input port.  This only has effect
on media that support native User Priority.  The default
values for Regenerated User Priorities are the same as
the User Priorities.

fsDot1dUserPriorityRegenEntry row .1.3.6.1.4.1.10876.101.1.116.6.1.2.2.1

A mapping of incoming User Priority to a Regenerated
User Priority.

Indexes

SUPERMICRO-MIStdBRIDGE-MIBfsDot1dBasePort fsDot1dUserPriority

Column	Syntax	OID
fsDot1dUserPriority The User Priority for a frame received on this port.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.116.6.1.2.2.1.1
fsDot1dRegenUserPriority The Regenerated User Priority the incoming User Priority is mapped to for this port.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.116.6.1.2.2.1.2

A table mapping evaluated User Priority to Traffic
Class, for forwarding by the bridge.  Traffic class is a
number in the range (0..(fsDot1dPortNumTrafficClasses-1)).

fsDot1dTrafficClassEntry row .1.3.6.1.4.1.10876.101.1.116.6.1.2.3.1

User Priority to Traffic Class mapping.

Indexes

SUPERMICRO-MIStdBRIDGE-MIBfsDot1dBasePort fsDot1dTrafficClassPriority

Column	Syntax	OID
fsDot1dTrafficClassPriority The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. …	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.116.6.1.2.3.1.1
fsDot1dTrafficClass The Traffic Class the received frame is mapped to.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.116.6.1.2.3.1.2

A table mapping Regenerated User Priority to Outbound
Access Priority.  This is a fixed mapping for all port
types, with two options for 802.5 Token Ring.

fsDot1dPortOutboundAccessPriorityEntry row .1.3.6.1.4.1.10876.101.1.116.6.1.2.4.1

Regenerated User Priority to Outbound Access Priority
mapping.

Indexes

SUPERMICRO-MIStdBRIDGE-MIBfsDot1dBasePort fsDot1dRegenUserPriority

Column	Syntax	OID
fsDot1dPortOutboundAccessPriority The Outbound Access Priority the received frame is mapped to.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.10876.101.1.116.6.1.2.4.1.1

A table of GARP control information about every bridge
port.  This is indexed by fsDot1dBasePort.

fsDot1dPortGarpEntry row .1.3.6.1.4.1.10876.101.1.116.6.1.3.1.1

GARP control information for a bridge port.

Indexes

No indexes recorded

Column	Syntax	OID
fsDot1dPortGarpJoinTime The GARP Join time, in centiseconds.	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.10876.101.1.116.6.1.3.1.1.1
fsDot1dPortGarpLeaveTime The GARP Leave time, in centiseconds.	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.10876.101.1.116.6.1.3.1.1.2
fsDot1dPortGarpLeaveAllTime The GARP LeaveAll time, in centiseconds.	SNMPv2-TCTimeIntervalr/w Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.10876.101.1.116.6.1.3.1.1.3

A table of GMRP control and status information about
every bridge port.  Augments the fsDot1dBasePortTable.

fsDot1dPortGmrpEntry row .1.3.6.1.4.1.10876.101.1.116.6.1.4.1.1

GMRP control and status information for a bridge port.

Indexes

No indexes recorded

Column	Syntax	OID
fsDot1dPortGmrpStatus The administrative state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port in all VLANs as long as fsDot1dGmrpStatus is also enabled(1). A value of disabled(2) indicates th…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.10876.101.1.116.6.1.4.1.1.1
fsDot1dPortGmrpFailedRegistrations The total number of failed GMRP registrations, for any reason, in all VLANs, on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.116.6.1.4.1.1.2
fsDot1dPortGmrpLastPduOrigin The Source MAC Address of the last GMRP message received on this port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.10876.101.1.116.6.1.4.1.1.3
fsDot1dPortRestrictedGroupRegistration The state of Restricted Group Registration on this port. If the value of this control is true(1), then creation of a new dynamic entry is permitted only if there is a Static Filtering Entry for the VLAN concerned, in wh…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.116.6.1.4.1.1.4