SUPERMICROP-BRIDGE-MIB

        The Bridge MIB Extension module with multiple instance capability 
for managing Priority and Multicast Filtering, defined by 
IEEE 802.1D-1998, including Restricted Group Registration 
defined by IEEE 802.1t-2001.
    
Source file
SUPERMICROP-BRIDGE-MIB
Last revised
Identity
fsPBridgeMIB
Base OID
1.3.6.1.4.1.10876.101.1.116.6
Imported Objects
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Counter64 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC MacAddress TEXTUAL-CONVENTION (no object page) TimeInterval TruthValue
SUPERMICRO-MIStdBRIDGE-MIB fsDot1dBasePort fsDot1dBasePortEntry fsDot1dBridge fsDot1dTp fsDot1dTpPort
Net-SNMP examples using the supermicro MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'SUPERMICROP-BRIDGE-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SUPERMICROP-BRIDGE-MIB::fsPBridgeMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SUPERMICROP-BRIDGE-MIB' -M '/opt/observium/mibs/supermicro:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SUPERMICROP-BRIDGE-MIB::fsPBridgeMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (54)
.1.3.6.1.4.1.10876.101.1.116.4.5
.1.3.6.1.4.1.10876.101.1.116.4.5.1
.1.3.6.1.4.1.10876.101.1.116.4.5.1.1
.1.3.6.1.4.1.10876.101.1.116.4.5.1.2
.1.3.6.1.4.1.10876.101.1.116.4.5.1.3
.1.3.6.1.4.1.10876.101.1.116.4.6
.1.3.6.1.4.1.10876.101.1.116.4.6.1
.1.3.6.1.4.1.10876.101.1.116.4.6.1.1
.1.3.6.1.4.1.10876.101.1.116.4.6.1.2
.1.3.6.1.4.1.10876.101.1.116.4.6.1.3
.1.3.6.1.4.1.10876.101.1.116.6
.1.3.6.1.4.1.10876.101.1.116.6.1
.1.3.6.1.4.1.10876.101.1.116.6.1.1
.1.3.6.1.4.1.10876.101.1.116.6.1.1.1
.1.3.6.1.4.1.10876.101.1.116.6.1.1.1.1
Integer32
.1.3.6.1.4.1.10876.101.1.116.6.1.1.1.1.1
Bits
.1.3.6.1.4.1.10876.101.1.116.6.1.1.1.1.2
.1.3.6.1.4.1.10876.101.1.116.6.1.1.1.1.3
.1.3.6.1.4.1.10876.101.1.116.6.1.1.1.1.4
.1.3.6.1.4.1.10876.101.1.116.6.1.1.2
.1.3.6.1.4.1.10876.101.1.116.6.1.1.2.1
Bits
.1.3.6.1.4.1.10876.101.1.116.6.1.1.2.1.1
.1.3.6.1.4.1.10876.101.1.116.6.1.2
.1.3.6.1.4.1.10876.101.1.116.6.1.2.1
.1.3.6.1.4.1.10876.101.1.116.6.1.2.1.1
Integer32
.1.3.6.1.4.1.10876.101.1.116.6.1.2.1.1.1
Integer32
.1.3.6.1.4.1.10876.101.1.116.6.1.2.1.1.2
.1.3.6.1.4.1.10876.101.1.116.6.1.2.2
.1.3.6.1.4.1.10876.101.1.116.6.1.2.2.1
Integer32
.1.3.6.1.4.1.10876.101.1.116.6.1.2.2.1.1
Integer32
.1.3.6.1.4.1.10876.101.1.116.6.1.2.2.1.2
.1.3.6.1.4.1.10876.101.1.116.6.1.2.3
.1.3.6.1.4.1.10876.101.1.116.6.1.2.3.1
Integer32
.1.3.6.1.4.1.10876.101.1.116.6.1.2.3.1.1
Integer32
.1.3.6.1.4.1.10876.101.1.116.6.1.2.3.1.2
.1.3.6.1.4.1.10876.101.1.116.6.1.2.4
.1.3.6.1.4.1.10876.101.1.116.6.1.2.4.1
Integer32
.1.3.6.1.4.1.10876.101.1.116.6.1.2.4.1.1
.1.3.6.1.4.1.10876.101.1.116.6.1.3
.1.3.6.1.4.1.10876.101.1.116.6.1.3.1
.1.3.6.1.4.1.10876.101.1.116.6.1.3.1.1
.1.3.6.1.4.1.10876.101.1.116.6.1.3.1.1.1
.1.3.6.1.4.1.10876.101.1.116.6.1.3.1.1.2
.1.3.6.1.4.1.10876.101.1.116.6.1.3.1.1.3
.1.3.6.1.4.1.10876.101.1.116.6.1.4
.1.3.6.1.4.1.10876.101.1.116.6.1.4.1
.1.3.6.1.4.1.10876.101.1.116.6.1.4.1.1
.1.3.6.1.4.1.10876.101.1.116.6.1.4.1.1.1
.1.3.6.1.4.1.10876.101.1.116.6.1.4.1.1.2
.1.3.6.1.4.1.10876.101.1.116.6.1.4.1.1.3
.1.3.6.1.4.1.10876.101.1.116.6.1.4.1.1.4
.1.3.6.1.4.1.10876.101.1.116.6.2
.1.3.6.1.4.1.10876.101.1.116.6.2.1
.1.3.6.1.4.1.10876.101.1.116.6.2.2
Dependencies (7) 4 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-CONFrfc
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. SUPERMICRO-MIStdBRIDGE-MIBsupermicro
  8. SUPERMICROP-BRIDGE-MIBsupermicroselected
Type Definitions (1)
Enumeration
enabled(1)
disabled(2)
Conformance Groups (11)
A collection of objects indicating the optional
capabilities of the device.
.1.3.6.1.4.1.10876.101.1.116.6.2.1.1
A collection of objects providing device-level control
for the Multicast Filtering extended bridge services.
.1.3.6.1.4.1.10876.101.1.116.6.2.1.2
A collection of objects providing device-level control
for the Priority services.
.1.3.6.1.4.1.10876.101.1.116.6.2.1.3
A collection of objects defining the User Priority
applicable to each port for media which do not support
native User Priority.
.1.3.6.1.4.1.10876.101.1.116.6.2.1.4
A collection of objects defining the User Priorities
applicable to each port for media which support native
User Priority.
.1.3.6.1.4.1.10876.101.1.116.6.2.1.5
A collection of objects defining the traffic classes
within a bridge for each evaluated User Priority.
.1.3.6.1.4.1.10876.101.1.116.6.2.1.6
A collection of objects defining the media dependent
outbound access level for each priority.
.1.3.6.1.4.1.10876.101.1.116.6.2.1.7
A collection of objects providing port level control
and status information for GARP operation.
.1.3.6.1.4.1.10876.101.1.116.6.2.1.8
A collection of objects providing port level control
and status information for GMRP operation.
.1.3.6.1.4.1.10876.101.1.116.6.2.1.9
A collection of objects providing 64-bit statistics
counters for high capacity bridge ports.
.1.3.6.1.4.1.10876.101.1.116.6.2.1.10
A collection of objects providing overflow statistics
counters for high capacity bridge ports.
.1.3.6.1.4.1.10876.101.1.116.6.2.1.11
Compliance Statements (1)

OID .1.3.6.1.4.1.10876.101.1.116.6.2.2.1
The compliance statement for device support of Priority
and Multicast Filtering extended bridging services.
Required groups
mandatory fsPBridgeExtCapGroup
optional fsPBridgeDeviceGmrpGroup This group is mandatory for devices supporting the GMRP
application, defined by IEEE 802.1D Extended Filtering
Services.
optional fsPBridgeDevicePriorityGroup This group is mandatory only for devices supporting
the priority forwarding operations defined by IEEE
802.1D.
optional fsPBridgeDefaultPriorityGroup This group is mandatory only for devices supporting
the priority forwarding operations defined by the
extended bridge services with media types, such as
Ethernet, that do not support native User Priority.
optional fsPBridgeRegenPriorityGroup This group is mandatory only for devices supporting
the priority forwarding operations defined by IEEE 802.1D
and which have interface media types that support
native User Priority e.g. IEEE 802.5.
optional fsPBridgePriorityGroup This group is mandatory only for devices supporting
the priority forwarding operations defined by IEEE 802.1D.
optional fsPBridgeAccessPriorityGroup This group is optional and is relevant only for devices
supporting the priority forwarding operations defined by
IEEE 802.1D and which have interface media types that support
native Access Priority e.g. IEEE 802.5.
optional fsPBridgePortGarpGroup This group is mandatory for devices supporting any
of the GARP applications: e.g. GMRP, defined by the
extended filtering services of 802.1D; or GVRP,
defined by 802.1Q (refer to the Q-BRIDGE-MIB for
conformance statements for GVRP).
optional fsPBridgePortGmrpGroup This group is mandatory for devices supporting the
GMRP application, as defined by IEEE 802.1D Extended
Filtering Services.
optional fsPBridgeHCPortGroup Support for this group in a device is mandatory for those
bridge ports which map to network interfaces that have the
value of the corresponding instance of ifSpeed
greater than 650,000,000 bits/second.
optional fsPBridgePortOverflowGroup Support for this group in a device is mandatory for those
bridge ports which map to network interfaces that have the
value of the corresponding instance of ifSpeed
greater than 650,000,000 bits/second.
Object refinements
ObjectAccessSyntaxDescription
fsDot1dPortNumTrafficClasses readonly
Write access is not required.
fsDot1dTrafficClass readonly
Write access is not required.
fsDot1dRegenUserPriority readonly
Write access is not required.