SUPERMICRO-RIP2-MIB Table View

This table contains a list of Router addresses 
from which you can receive RIP Packets

fsRip2NBRTrustListEntry row .1.3.6.1.4.1.10876.101.1.75.1.13.1

An entry of fsRip2NBRTrustListTable.

Indexes

fsRip2TrustNBRIpAddr

Column	Syntax	OID
fsRip2TrustNBRIpAddr Ipaddress of the Router from which this router can accept RIP Packets	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.75.1.13.1.1
fsRip2TrustNBRRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.75.1.13.1.2

A list of subnets which require separate
configuration in RIP.

fsRip2IfConfEntry row .1.3.6.1.4.1.10876.101.1.75.1.14.1

A Single Routing Domain in a single Subnet.

Indexes

fsRip2IfConfAddress

Column	Syntax	OID
fsRip2IfConfAddress The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.75.1.14.1.1
fsRip2IfAdminStat The administrative status of RIP-2 in the router. The value 'enabled' denotes that the RIP2 Process is active throughout the system. 'disabled' disables RIP2 Process in the system. 'passive' denotes that the R…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 passive	.1.3.6.1.4.1.10876.101.1.75.1.14.1.2
fsRip2IfConfOperState This gives the Operational Status of the Interface	Enumeration Enumerated Values: 1 operup 2 operdown	.1.3.6.1.4.1.10876.101.1.75.1.14.1.3
fsRip2IfConfUpdateTmr Interval Time Between Updates	Integer32r/w Constraints: range: 10-3600	.1.3.6.1.4.1.10876.101.1.75.1.14.1.4
fsRip2IfConfGarbgCollectTmr Interval before deleting an entry after not hearing it. Also the advertisements of this entry is set to INFINITY while sending to others	Integer32r/w Constraints: range: 120-180	.1.3.6.1.4.1.10876.101.1.75.1.14.1.5
fsRip2IfConfRouteAgeTmr Time after which the entry is put into garbage collect interval	Integer32r/w Constraints: range: 30-500	.1.3.6.1.4.1.10876.101.1.75.1.14.1.6
fsRip2IfSplitHorizonStatus A flag to denote the split horizon operational status in the system. The value `splitHorizon` denotes that splitHorizon should be applied in the response packets that are going out	Enumerationr/w Enumerated Values: 1 splitHorizon 2 splitHorizonWithPoisRev 3 disable	.1.3.6.1.4.1.10876.101.1.75.1.14.1.7
fsRip2IfConfDefRtInstall A flag that decides whether the default route received over this interface should be installed to rip database or not.	Enumerationr/w Enumerated Values: 1 installDefRt 2 doNotInstallDefRt	.1.3.6.1.4.1.10876.101.1.75.1.14.1.8
fsRip2IfConfSpacingTmr Number of route entries are greater than 25 , regular updates(response packets sent for every fsRip2IfConfUpdateTmr interval) are sent in multiple packets.Spacing Provides the interval between the packets.F…	Integer32r/w Constraints: range: 0-360	.1.3.6.1.4.1.10876.101.1.75.1.14.1.9
fsRip2IfConfAuthType The type of Authentication used on this interface. Authentication type is not updated in stdrip-mib for SHA-Authentication.This object needs to be configured by the user to set any SHA authentication	Enumerationr/w Enumerated Values: 1 md5 2 sha1 3 sha256 4 sha384 5 sha512	.1.3.6.1.4.1.10876.101.1.75.1.14.1.10
fsRip2IfConfInUseKey This represents the active authentication KeyID that is currently used in the particular interface for sending RIP updates.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.75.1.14.1.11
fsRip2IfConfAuthLastKeyStatus A flag to indicate that the last key configured on a RIP interface has expired or not.This object is updated during transmission and reception of RIP updates. TRUE - The last key on this particular int…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.10876.101.1.75.1.14.1.12

The MD5 Authentication table for RIP.

fsRipMd5AuthEntry row .1.3.6.1.4.1.10876.101.1.75.1.15.1

An entry in to the MD5 Authentiaction table. More than one
entry can be configured for an interface.

Indexes

fsRipMd5AuthAddress fsRipMd5AuthKeyId

Column	Syntax	OID
fsRipMd5AuthAddress The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order. RIP should have be…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.75.1.15.1.1
fsRipMd5AuthKeyId The key ID for this key. This should be unique for the same fsRipMd5AuthAddress. This enables the configuration of more than one key for an interface.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.75.1.15.1.2
fsRipMd5AuthKey The value to be used as the Authentication Key. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the right, with nulls (0x00). Reading this object always results in…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.10876.101.1.75.1.15.1.3
fsRipMd5KeyStartTime The time the router will start accepting or generating the packets that have been created with this key. The start time of the key should be less than the expiry time of the previous key. During the overlap interval, …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.75.1.15.1.4
fsRipMd5KeyExpiryTime The time the router will stop accepting the packets that have been created with this key. This time will be indicated (in the number of seconds) from the start time of the key. If the expiry time of a key is zero, …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.75.1.15.1.5
fsRipMd5KeyRowStatus The status of this row by which a new entry can be created or deleted by setting this object to the appropriate value as mentioned in SMI-v2.If this entry is made active, then no other entry in the table will be allow…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.75.1.15.1.6

This table contains a list of Router addresses 
from which you can receive RIP Packets

fsRip2NBRUnicastListEntry row .1.3.6.1.4.1.10876.101.1.75.1.16.1

An entry of fsRip2NBRUnicastListTable.

Indexes

fsRip2NBRUnicastIpAddr

Column	Syntax	OID
fsRip2NBRUnicastIpAddr Ipaddress of the neighbour Router to which unicast update has to be sent	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.75.1.16.1.1
fsRip2NBRUnicastNBRRowStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.75.1.16.1.2

This table contain Local routing table entries

fsRip2LocalRoutingEntry row .1.3.6.1.4.1.10876.101.1.75.1.17.1

A list of routes in local routing table

Indexes

fsRip2DestNet fsRip2DestMask fsRip2Tos fsRip2NextHop

Column	Syntax	OID
fsRip2DestNet The IP Address of the destination network	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.75.1.17.1.1
fsRip2DestMask The Destination mask for the destination network	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.75.1.17.1.2
fsRip2Tos The value for Rip is always zero	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.10876.101.1.75.1.17.1.3
fsRip2NextHop The The nexthop address to which any datagrams destined to the destination,to be forwarded. (In some special cases)	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.75.1.17.1.4
fsRip2RtIfIndex The interface through which the route is learnt	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.75.1.17.1.5
fsRip2RtType The value for Rip is always zero	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.75.1.17.1.6
fsRip2Proto The protocol id == RIP (8 - 1)here	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.75.1.17.1.7
fsRip2ChgTime The time when the route is installed	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.75.1.17.1.8
fsRip2Metric The reachability cost for the destination	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.75.1.17.1.9
fsRip2RowStatus Row status for perticular route entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.10876.101.1.75.1.17.1.10
fsRip2Gateway The gateway address to which any datagrams destined to the destination, to be forwarded	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.75.1.17.1.11

The (conceptual) table listing the router's
supernet routes.RIP advertises only supernet
routes on the speicified interface. And it
suppresses all routes which are subset of the supernet.

fsRipAggEntry row .1.3.6.1.4.1.10876.101.1.75.1.18.1

An entry (conceptual row) in the
fsRipAggTable representing supertnet route for
the domain.

Indexes

fsRipIfIndex fsRipAggAddress fsRipAggAddressMask

Column	Syntax	OID
fsRipIfIndex The interface index over which the aggregation is configured.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.10876.101.1.75.1.18.1.1
fsRipAggAddress The aggregated address which when combined with the corresponding value of fsRipAggAddressMask identifies the supernet route for this domain.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.75.1.18.1.2
fsRipAggAddressMask The aggregated address mask which when combined with the corresponding value of fsRipAggAddress identifies the supernet route for the domain.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.75.1.18.1.3
fsRipAggStatus The status of this row , by which new entries may be created or old entries deleted from this table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.75.1.18.1.4

The Crypto Authentication table for RIP.

fsRipCryptoAuthEntry row .1.3.6.1.4.1.10876.101.1.75.1.20.1

An entry in to the Crypto Authentication table. More than one
entry can be configured for an interface.

Indexes

fsRipCryptoAuthIfIndex fsRipCryptoAuthAddress fsRipCryptoAuthKeyId

Column	Syntax	OID
fsRipCryptoAuthIfIndex The interface index value of the RIP interface.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.10876.101.1.75.1.20.1.1
fsRipCryptoAuthAddress Indicates the IP Address on the interface. Currently this IP Address will be taken as dont-care value since IP Address specific authentication key configuration is not supported. Only interface specific key configura…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.10876.101.1.75.1.20.1.2
fsRipCryptoAuthKeyId The key ID for this key. This configured KeyID will be sent in the RIP update packet. This object enables the configuration of more than one key for an interface.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.75.1.20.1.3
fsRipCryptoAuthKey The value to be used as the Authentication Key. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the right, with nulls (0x00). Reading this object always results in…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.10876.101.1.75.1.20.1.4
fsRipCryptoKeyStartAccept The time the router will start accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed as 2136-02-06,06:28:15, DateTime equivalent to max value of…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.10876.101.1.75.1.20.1.5
fsRipCryptoKeyStartGenerate The time the router will start using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 2136-02-06,06:28:15, DateTime equivalent to max value of UINT4. For exam…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.10876.101.1.75.1.20.1.6
fsRipCryptoKeyStopGenerate The time the router will stop using this key for packets generation.If the value is not set, then it will be taken as infinite and displayed as 2136-02-06,06:28:15, DateTime equivalent to max value of UINT4. For exampl…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.10876.101.1.75.1.20.1.7
fsRipCryptoKeyStopAccept The time the router will stop accepting packets that have been created with this key.If the value is not set, then it will be taken as infinite and displayed as 2136-02-06,06:28:15, DateTime equivalent to max value of …	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.10876.101.1.75.1.20.1.8
fsRipCryptoKeyStatus Identifies the status of key configured on a RIP interface. The value valid indicates that there is a valid keyID configured on the interface. Before the Key is made valid the Authentication Key must be configured.The…	Enumerationr/w Enumerated Values: 1 valid 2 delete	.1.3.6.1.4.1.10876.101.1.75.1.20.1.9

A list of RIP Peers.

fsRip2PeerEntry row .1.3.6.1.4.1.10876.101.1.75.1.21.1

Information regarding a single routing peer.

Indexes

No indexes recorded

Column	Syntax	OID
fsRip2PeerInUseKey This represents the active authentication KeyID that is currently used by the peer for sending RIP updates.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.10876.101.1.75.1.21.1.1

A list of subnets which require separate 
status monitoring in RIP.

fsRip2IfStatEntry row .1.3.6.1.4.1.10876.101.1.75.1.23.1

A Single Routing Domain in a single Subnet.

Indexes

No indexes recorded

Column	Syntax	OID
fsRip2IfStatRcvBadAuthPackets The number of RIP response packets received by the RIP process which were subsequently discarded due to authentication failure.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.10876.101.1.75.1.23.1.1

A table describing the configuration of filtering for route map.

fsRipDistInOutRouteMapEntry row .1.3.6.1.4.1.10876.101.1.75.3.1.1

Information describing the filtering configuration of single entry.

Indexes

fsRipDistInOutRouteMapName fsRipDistInOutRouteMapType

Column	Syntax	OID
fsRipDistInOutRouteMapName Route map name.	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.10876.101.1.75.3.1.1.1
fsRipDistInOutRouteMapType Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.10876.101.1.75.3.1.1.3
fsRipDistInOutRouteMapValue Distance value ( this will be unused for distribute list )	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.10876.101.1.75.3.1.1.4
fsRipDistInOutRouteMapRowStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.10876.101.1.75.3.1.1.5