SSPM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
44

sspmCapabilitiesTable

table
.1.3.6.1.2.1.16.28.1.1.5 · 1 row entry · 1 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk sspmCapabilitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SSPM-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SSPM-MIB::sspmCapabilitiesTable' 
The table of SSPM capabilities.
sspmCapabilitiesEntry row .1.3.6.1.2.1.16.28.1.1.5.1
Details about a particular SSPM capability.
Indexes
Column Syntax OID
sspmCapabilitiesInstance
Indicates whether SSPM configuration of the corresponding
AppLocalIndex is supported by this device. Generally,
entries in this table are only made by the device when the
configuration of the measurement is available.
APM-MIBAppLocalIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.2.1.16.28.1.1.5.1.1

sspmSourceProfileTable

table
.1.3.6.1.2.1.16.28.1.2.1 · 1 row entry · 18 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk sspmSourceProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SSPM-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SSPM-MIB::sspmSourceProfileTable' 
The table of SSPM Source Profiles configured.
sspmSourceProfileEntry row .1.3.6.1.2.1.16.28.1.2.1.1
Details about a particular SSPM Source Profile
configuration. Entries must exist in this table
in order to be referenced by rows in the
sspmSourceControlTable.
Indexes
Column Syntax OID
sspmSourceProfileInstance
An arbitrary index.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.2.1.16.28.1.2.1.1.1
sspmSourceProfileType
The AppLocalIndex value that uniquely identifies the
measurement per the APM-MIB. In order to create a row
in this table, there must be a corresponding row in the
sspmCapabilitiesTable.

When attempting t…
APM-MIBAppLocalIndexr/w
Type Constraints:
range: 1..2147483647
 .1.3.6.1.2.1.16.28.1.2.1.1.2
sspmSourceProfilePacketSize
The size of packet to be transmitted in bytes. The
size accounts for all data within the IPv4 or IPv6
payloads, excluding the IP headers, IP header options
and link-level protocol headers.

If the size is…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.16.28.1.2.1.1.3
sspmSourceProfilePacketFillType
Indicates how the packet is filled.

'random' indicates that the packet contains random
data patterns. This is probe and implementation
dependent.

'pattern' indicates that the pattern defin…
Enumerationr/w
Enumerated Values:
1random
2pattern
3url
 .1.3.6.1.2.1.16.28.1.2.1.1.4
sspmSourceProfilePacketFillValue
The string value with which to fill the packet. If
sspmSourceProfilePacketFillType is set to 'pattern',
then this pattern is repeated until the packet is
sspmSourcePacketSize in bytes. Note that if the
length of the o…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.2.1.16.28.1.2.1.1.5
sspmSourceProfileTOS
Represents the TOS field in the IP packet header. The
value of this object defaults to zero if not set.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.2.1.16.28.1.2.1.1.6
sspmSourceProfileFlowLabel
This object is used to specify the Flow Label in a IPv6
packet (RFC 2460) to force special handling by the IPv6
routers; e.g., non-default quality-of-service handling.

This object is meaningful only when …
Integer32r/w
Constraints:
range: 0-1048575
 .1.3.6.1.2.1.16.28.1.2.1.1.7
sspmSourceProfileLooseSrcRteFill
In the event that the test should run over a
specific route, the intent is to force the route using the
Loose Source Route option in IPv4 [RFC791] and
IPv6 [RFC2460]. This object contains a
series of IP addresses along…
OctetStringr/w
Constraints:
range: 0-240
 .1.3.6.1.2.1.16.28.1.2.1.1.8
sspmSourceProfileLooseSrcRteLen
In the event that the test should run over a
specific route, the intent is to force the route.
This attribute specifies the length of data to
be copied from the sspmSourceProfileLooseSrcRteFill
into the route data field…
Integer32r/w
Constraints:
range: 0-240
 .1.3.6.1.2.1.16.28.1.2.1.1.9
sspmSourceProfileTTL
If non-zero, this specifies the value to place into
the TTL field on transmission.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.2.1.16.28.1.2.1.1.10
sspmSourceProfileNoFrag
When true, the 'Don't Fragment Bit' should be set
on the packet header.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.2.1.16.28.1.2.1.1.11
sspmSourceProfile8021Tagging
IEEE 802.1Q tagging used in IEEE 802.1D bridged
environments.

A value of -1 indicates that the packets are untagged.

A value of 0 to 65535 is the value of the tag to be
inserted in the tagg…
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.2.1.16.28.1.2.1.1.12
sspmSourceProfileUsername
An optional username used by the application protocol.
SYSAPPL-MIBUtf8Stringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.16.28.1.2.1.1.13
sspmSourceProfilePassword
An optional password used by the application protocol.
SYSAPPL-MIBUtf8Stringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.16.28.1.2.1.1.14
sspmSourceProfileParameter
An optional parameter used by the application protocol.
For DNS, this would be the hostname or IP. For HTTP,
this would be the URL. For nntp, this would be the
news group. For TCP, this would be the port number.
For …
OctetStringr/w
Constraints:
range: 0-65535
 .1.3.6.1.2.1.16.28.1.2.1.1.15
sspmSourceProfileOwner
Name of the management station/application that
set up the profile.
RMON-MIBOwnerStringr/w
Type Constraints:
range: 0..127
 .1.3.6.1.2.1.16.28.1.2.1.1.16
sspmSourceProfileStorageType
The storage type of this sspmSourceProfileEntry. If the
value of this object is 'permanent', no objects in this row
need to be writable.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.2.1.16.28.1.2.1.1.17
sspmSourceProfileStatus
Status of this profile.

An entry may not exist in the active state unless all
objects in the entry have an appropriate value.

Once this object is set to active(1), no objects in the
sspmSou…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.2.1.16.28.1.2.1.1.18

sspmSourceControlTable

table
.1.3.6.1.2.1.16.28.1.2.2 · 1 row entry · 14 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk sspmSourceControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SSPM-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SSPM-MIB::sspmSourceControlTable' 
The table of SSPM measurements configured.
sspmSourceControlEntry row .1.3.6.1.2.1.16.28.1.2.2.1
Details about a particular SSPM configuration.
Indexes
Column Syntax OID
sspmSourceControlInstance
An arbitrary index.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.2.1.16.28.1.2.2.1.1
sspmSourceControlProfile
A pointer to the profile (sspmSourceProfileEntry) that
this control entry uses to define the test being
performed.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.2.1.16.28.1.2.2.1.2
sspmSourceControlSrc
The ifIndex where the packet should originate from the
probe (if it matters). A value of zero indicates that
it does not matter and that the device decides.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.2.1.16.28.1.2.2.1.3
sspmSourceControlDestAddrType
The type of Internet address by which the destination
is accessed.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.2.1.16.28.1.2.2.1.4
sspmSourceControlDestAddr
The Internet address for the destination. The formatting
of this object is controlled by the
sspmSourceControlDestAddrType object above.

When this object contains a DNS name, then the name is
resolved to…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.16.28.1.2.2.1.5
sspmSourceControlEnabled
When set to 'true', this test is enabled. When set to
'false', it is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.2.1.16.28.1.2.2.1.6
sspmSourceControlTimeOut
Timeout value for the measurement response. If no
response is received in the time specified, then
the test fails.
SspmMicroSecondsr/w .1.3.6.1.2.1.16.28.1.2.2.1.7
sspmSourceControlSamplingDist
When this attribute is set to 'deterministic', then
packets are generated at with a fixed inter-packet
injection time specified by sspmSourceFrequency.

When this attribute is set to 'Poisson', then packet…
Enumerationr/w
Enumerated Values:
1deterministic
2poisson
 .1.3.6.1.2.1.16.28.1.2.2.1.8
sspmSourceControlFrequency
The inverse of this value is the rate at which packets
are generated. Refer to sspmSourceSamplingDistribution.
If the value set is less than the value of
sspmGeneralMinFrequency, then the set will fail with an
error-st…
SspmMicroSecondsr/w .1.3.6.1.2.1.16.28.1.2.2.1.9
sspmSourceControlFirstSeqNum
The first sequence number of packets to be transmitted.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.16.28.1.2.2.1.10
sspmSourceControlLastSeqNum
The last sequence number transmitted. This value is updated
by the agent after packet generation.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.16.28.1.2.2.1.11
sspmSourceControlOwner
Name of the management station/application that set
up the test.
RMON-MIBOwnerStringr/w
Type Constraints:
range: 0..127
 .1.3.6.1.2.1.16.28.1.2.2.1.12
sspmSourceControlStorageType
The storage type of this sspmSourceControlEntry. If the
value of this object is 'permanent', no objects in this row
need to be writable.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.2.1.16.28.1.2.2.1.13
sspmSourceControlStatus
Status of this source control entry.

An entry may not exist in the active state unless all
objects in the entry have an appropriate value.

When this attribute has the value of
'active', non…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.2.1.16.28.1.2.2.1.14

sspmSinkTable

table
.1.3.6.1.2.1.16.28.1.5.1 · 1 row entry · 11 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk sspmSinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SSPM-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SSPM-MIB::sspmSinkTable' 
A table configuring the sink for measurements.
sspmSinkEntry row .1.3.6.1.2.1.16.28.1.5.1.1
The details of a particular sink entry. If the measurement
is a round-trip type, then the sink entry will be on the
same probe as the corresponding sspmSourceEntry. If the
measurement is a one-way, type then the sink …
Indexes
Column Syntax OID
sspmSinkInstance
An index. When the measurement is for a round-trip
measurement, then this table entry is on the same probe as
the corresponding sspmSourceEntry, and the value of this
attribute should correspond to the value of
sspmSou…
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.2.1.16.28.1.5.1.1.1
sspmSinkType
The AppLocalIndex value that uniquely identifies the
measurement per the APM-MIB. In order to create a row
in this table, there must be a corresponding row in the
sspmCapabilitiesTable. If there is no corresponding
ro…
APM-MIBAppLocalIndexr/w
Type Constraints:
range: 1..2147483647
 .1.3.6.1.2.1.16.28.1.5.1.1.2
sspmSinkSourceAddressType
The type of Internet address of the source.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.2.1.16.28.1.5.1.1.3
sspmSinkSourceAddress
The Internet address of the source. The formatting
of this object is controlled by the sspmSinkSourceAddressType
object above.

This object should be set only to a valid device address
that has been admin…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.16.28.1.5.1.1.4
sspmSinkExpectedRate
The expected rate at which packets will arrive.
SspmMicroSecondsr/w .1.3.6.1.2.1.16.28.1.5.1.1.5
sspmSinkEnable
Indicates if the sink is enabled or not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.2.1.16.28.1.5.1.1.6
sspmSinkExpectedFirstSequenceNum
The expected first sequence number of packets.
This is used by the sink to determine if packets
were lost at the initiation of the test.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.16.28.1.5.1.1.7
sspmSinkLastSequenceNumber
The last sequence number received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.16.28.1.5.1.1.8
sspmSinkLastSequenceInvalid
The number of packets that arrived whose
sequence number was not one plus the value of
sspmSinkLastSequenceNumber.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.16.28.1.5.1.1.9
sspmSinkStorageType
The storage type of this sspmSinkEntry. If the value
of this object is 'permanent', no objects in this row
need to be writable.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.2.1.16.28.1.5.1.1.10
sspmSinkStatus
Status of this conceptual row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.

Once this object is set to active(1), no objects with
MAX-ACCESS of rea…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.2.1.16.28.1.5.1.1.11