SLE-RMON-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

sleHistoryTable

table

.1.3.6.1.4.1.6296.101.9.1.1 · 1 row entry · 7 columns

Open in standard view

Uses the dasan variant from /opt/observium/mibs/dasan.

Command help

Walk sleHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-RMON-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-RMON-MIB::sleHistoryTable'

A list of history control entries.

sleHistoryEntry row .1.3.6.1.4.1.6296.101.9.1.1.1

A list of parameters that set up a periodic sampling
of statistics. As an example, an instance of the
sleHistoryControlInterval object might be named
sleHistoryControlInterval.2

Indexes

No indexes recorded

Column Syntax OID

sleHistoryIndex

An index that uniquely identifies an entry in the
historyControl table. Each such entry defines a
set of samples at a particular interval for an
interface on the device.

Integer32

.1.3.6.1.4.1.6296.101.9.1.1.1.1

sleHistoryDataSource

This object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
historyControlEntry. This source can be any
interface on this device. In ord…

ObjectIdentifier

Constraints:
range: 1-65535

.1.3.6.1.4.1.6296.101.9.1.1.1.2

sleHistoryBucketsRequested

The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
historyControlEntry.

When this object is created or modified, th…

Integer32

Constraints:
range: 0-127

.1.3.6.1.4.1.6296.101.9.1.1.1.3

sleHistoryBucketsGranted

The number of discrete sampling intervals
over which data shall be saved in the part of
the media-specific table associated with this
historyControlEntry.

When the associated historyControlBucketsRequeste…

Integer32

Enumerated Values:

1	none
2	log
3	snmpTrap
4	logAndTrap

.1.3.6.1.4.1.6296.101.9.1.1.1.4

sleHistoryInterval

The interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
historyControlEntry. This interval can
be set to any number of seconds between 1 and
3…

Integer32

Constraints:
range: 0-127

.1.3.6.1.4.1.6296.101.9.1.1.1.5

sleHistoryOwner

The entity that configured this entry and is
therefore using the resources assigned to it.

OwnerString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.6296.101.9.1.1.1.6

sleHistoryStatus

The status of this historyControl entry.

Each instance of the media-specific table associated
with this historyControlEntry will be deleted by the
agent if this historyControlEntry is not equal to
valid(1…

SleEntryStatus

Type Values:

1	valid
2	createRequest
3	underCreation

.1.3.6.1.4.1.6296.101.9.1.1.1.7

sleAlarmTable

table

.1.3.6.1.4.1.6296.101.9.2.1 · 1 row entry · 12 columns

Open in standard view

Uses the dasan variant from /opt/observium/mibs/dasan.

Command help

Walk sleAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-RMON-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-RMON-MIB::sleAlarmTable'

A list of alarm entries.

sleAlarmEntry row .1.3.6.1.4.1.6296.101.9.2.1.1

A list of parameters that set up a periodic checking
for alarm conditions. For example, an instance of the
sleAlarmValue object might be named sleAlarmValue.8

Indexes

No indexes recorded

Column Syntax OID

sleAlarmIndex

An index that uniquely identifies an entry in the
alarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device.

Integer32

.1.3.6.1.4.1.6296.101.9.2.1.1.1

sleAlarmInterval

The interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. When setting this variable, care
should be taken in the case of deltaValue
sampling - the interval should be s…

SNMPv2-SMIInteger32

Constraints:
range: 1-65535

.1.3.6.1.4.1.6296.101.9.2.1.1.2

sleAlarmVariable

The object identifier of the particular variable to
be sampled. Only variables that resolve to an ASN.1
primitive type of INTEGER (INTEGER, Counter, Gauge,
or TimeTicks) may be sampled.

Because SNMP acce…

ObjectIdentifier

.1.3.6.1.4.1.6296.101.9.2.1.1.3

sleAlarmSampleType

The method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the selected variable
will be compared directl…

Enumeration

.1.3.6.1.4.1.6296.101.9.2.1.1.4

sleAlarmValue

The value of the statistic during the last sampling
period. For example, if the sample type is
deltaValue, this value will be the difference
between the samples at the beginning and end of the
period. If the sample ty…

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.9.2.1.1.5

sleAlarmStartupAlarm

The alarm that may be sent when this entry is first
set to valid. If the first sample after this entry
becomes valid is greater than or equal to the
risingThreshold and alarmStartupAlarm is equal to
risingAlarm(1) or r…

Enumeration

.1.3.6.1.4.1.6296.101.9.2.1.1.6

sleAlarmRisingThreshold

A threshold for the sampled statistic. When the
current sampled value is greater than or equal to
this threshold, and the value at the last sampling
interval was less than this threshold, a single
event will be generat…

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.9.2.1.1.7

sleAlarmFallingThreshold

A threshold for the sampled statistic. When the
current sampled value is less than or equal to this
threshold, and the value at the last sampling
interval was greater than this threshold, a single
event will be generat…

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6296.101.9.2.1.1.8

sleAlarmRisingEventIndex

The index of the eventEntry that is
used when a rising threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there…

Integer32

.1.3.6.1.4.1.6296.101.9.2.1.1.9

sleAlarmFallingEventIndex

The index of the eventEntry that is
used when a falling threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If ther…

Integer32

.1.3.6.1.4.1.6296.101.9.2.1.1.10

sleAlarmOwner

The entity that configured this entry and is
therefore using the resources assigned to it.

OwnerString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.6296.101.9.2.1.1.11

sleAlarmStatus

The status of this alarm entry.

SleEntryStatus

Type Values:

1	valid
2	createRequest
3	underCreation

.1.3.6.1.4.1.6296.101.9.2.1.1.12

sleEventTable

table

.1.3.6.1.4.1.6296.101.9.3.1 · 1 row entry · 7 columns

Open in standard view

Uses the dasan variant from /opt/observium/mibs/dasan.

Command help

Walk sleEventTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-RMON-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-RMON-MIB::sleEventTable'

A list of events to be generated.

sleEventEntry row .1.3.6.1.4.1.6296.101.9.3.1.1

A set of parameters that describe an event to be
generated when certain conditions are met. As an
example, an instance of the sleEventLastTimeSent object
might be named sleEventLastTimeSent.6

Indexes

No indexes recorded

Column Syntax OID

sleEventIndex

An index that uniquely identifies an entry in the
event table. Each such entry defines one event that
is to be generated when the appropriate conditions
occur.

Integer32

.1.3.6.1.4.1.6296.101.9.3.1.1.1

sleEventDescription

A comment describing this event entry.

OctetString

.1.3.6.1.4.1.6296.101.9.3.1.1.2

sleEventType

The type of notification that the probe will make
about this event. In the case of log, an entry is
made in the log table for each event. In the case of
snmp-trap, an SNMP trap is sent to one or more
management statio…

Enumeration

.1.3.6.1.4.1.6296.101.9.3.1.1.3

sleEventCommunity

If an SNMP trap is to be sent, it will be sent to
the SNMP community specified by this octet string.
In the future this table will be extended to include
the party security mechanism. This object shall be
set to a stri…

OctetString

.1.3.6.1.4.1.6296.101.9.3.1.1.4

sleEventLastTimeSent

The value of sysUpTime at the time this event
entry last generated an event. If this entry has
not generated any events, this value will be
zero.

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6296.101.9.3.1.1.5

sleEventOwner

The entity that configured this entry and is
therefore using the resources assigned to it.

If this object contains a string starting with
'monitor' and has associated entries in the log
table, all connect…

OwnerString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.6296.101.9.3.1.1.6

sleEventStatus

The status of this event entry.

If this object is not equal to valid(1), all
associated log entries shall be deleted by the
agent.

SleEntryStatus

Type Values:

1	valid
2	createRequest
3	underCreation

.1.3.6.1.4.1.6296.101.9.3.1.1.7

sleEtherStatsTable

table

.1.3.6.1.4.1.6296.101.9.4.1.1 · 1 row entry · 22 columns

Open in standard view

Uses the dasan variant from /opt/observium/mibs/dasan.

Command help

Walk sleEtherStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SLE-RMON-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SLE-RMON-MIB::sleEtherStatsTable'

Description.

sleEtherStatsEntry row .1.3.6.1.4.1.6296.101.9.4.1.1.1

Description.

Indexes

No indexes recorded

Column Syntax OID

sleEtherStatsIndex

The value of this object uniquely identifies this sleEtherStats entry

Integer32

.1.3.6.1.4.1.6296.101.9.4.1.1.1.1

sleEtherStatsDataSource

This object identifies the source of the data that
this sleEtherStats entry is configured to analyze. This
source can be any ethernet interface on this device.
In order to identify a particular interface, this
object s…

ObjectIdentifier

.1.3.6.1.4.1.6296.101.9.4.1.1.1.2

sleEtherStatsDropEvents

The total number of events in which packets
were dropped by the probe due to lack of resources.
Note that this number is not necessarily the number of
packets dropped; it is just the number of times this
condition has b…

SLE-RMON-MIB Table View

sleHistoryTable

sleAlarmTable

sleEventTable

sleEtherStatsTable

sleRmonSimpleTable

sleRmonSimpleQueueTable