SIAE-RADIO-SYSTEM-MIB Table View

A list of radio interface entries. This table is useful 
to show the manager all the available radio interfaces 
on the equipment. Moreover it is a reference for 
Performance Monitoring (PWR and G828).

radioEntry row .1.3.6.1.4.1.3373.1103.80.2.1

An entry containing management information applicable to a
particular radio interface.

Indexes

radioIndex

Column	Syntax	OID
radioIndex A unique value, greater than zero, for each radio interface. It is recommended that values are assigned contiguously starting from 1.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.2.1.1
radioLabel A textual string containing information about the radio interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.3373.1103.80.2.1.2
radioType The type of interface.	Enumeration Enumerated Values: 1 other 2 analogRadio 3 digitalRadio 4 xpicRadio	.1.3.6.1.4.1.3373.1103.80.2.1.3
radioIfIndex This object defines a greater than zero value to identify an interface in ifTable or a zero value if ifTable is not supported.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.3373.1103.80.2.1.4
radioStorageType The storage type of this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.3373.1103.80.2.1.5

A list of xpic radio interface entries. If a manager 
wants to make an xpic link, it should only add a 
particular xpic radio interface to an xpic link.

xpicEntry row .1.3.6.1.4.1.3373.1103.80.3.1

An entry containing management information applicable to a
particular xpic radio interface.

Indexes

xpicIndex

Column	Syntax	OID
xpicIndex A unique value, greater than zero, for each xpic radio interface. It is recommended that values are assigned contiguously starting from 1.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.3.1.1
xpicRadioIdx Index of xpic radio interface, corresponding to an available xpic radio interface in radioTable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.3.1.2
xpicRowstatus Status of this conceptual row in xpicTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.80.3.1.3

A list of xpic channel entries. This table maps
each xpic radio in respective xpic radio interface.

xpicChEntry row .1.3.6.1.4.1.3373.1103.80.4.1

An entry containing management information applicable to a
particular xpic channel. It defines radio interface and
polarization for a given xpic channel.

Indexes

xpicIndex xpicChPolIndex

Column	Syntax	OID
xpicChPolIndex This object identifies the xpic radio polarization.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.3373.1103.80.4.1.1
xpicChRadioIdx Xpic radio interface, corresponding to a radio interface in radioTable, used to make up the given xpic radio interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.4.1.2
xpicChRowstatus Status of this conceptual row in xpicChTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.80.4.1.3

A list of link entries.

linkEntry row .1.3.6.1.4.1.3373.1103.80.6.1

An entry containing management information applicable to a
particular link.

Indexes

linkIndex

Column	Syntax	OID
linkIndex A unique value, greater than zero, for each link. Manager must use the first available index, suggested by linkAvailableIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.6.1.1
linkType This object identifies link type. Supported link types are: single link, 1+1 Hot Standby, 1+1 Frequency Diversity, 2+0 XPIC, 2+2 XPIC Hot Standby, 2+2 XPIC Frequency Diversity, N+1, and 1+0 XPIC Horizontal/Vertical pola…	Enumerationr/w Enumerated Values: 1 radio1p0 2 radio1p1HS 3 radio1p1FD 4 radio2p0Xpic 5 radio2p2XpicHS 6 radio2p2XpicFD 7 radioNp1 8 radio1p0XpicH 9 radio1p0XpicV	.1.3.6.1.4.1.3373.1103.80.6.1.2
linkLabel A textual string containing information about the link. This string should give more details about link specific parameters.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.3373.1103.80.6.1.3
linkIfIndex This object defines a greater than zero value to identify a link in ifTable or a zero value if ifTable is not supported.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.3373.1103.80.6.1.4
linkRowstatus Status of this row of linkTable. This object is used to manage the creation and deletion of conceptual rows in linkTable. To create a row in this table, a manager should set rowstatus to createAndWait(5) and choose a l…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.80.6.1.5

A list of link channel entries.

linkChEntry row .1.3.6.1.4.1.3373.1103.80.7.1

An entry containing management information applicable to a
particular link channel.

Indexes

linkIndex linkChIndex

Column	Syntax	OID
linkChIndex Link Channel Index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.7.1.1
linkChRadioIdx Radio channel index that corresponds to an available radio interface in radioTable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.7.1.2
linkChRadioSettingsIdx Radio Settings Index. This object is a foreign key for a corresponding radioSettingsTable entry, which is automatically created by agent.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.7.1.3
linkChRowstatus Status of this row of linkChTable. This object is used to manage the creation and deletion of conceptual rows in linkChTable. To create a row in this table, a manager should set rowstatus to createAndWait(5). Until i…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.80.7.1.4

Table with link settings entries. This table contains all
parameters of a radio frequency link. The content of this
table can be changed by a manager if linkRowStatus is 
notInService(2).

linkSettingsEntry row .1.3.6.1.4.1.3373.1103.80.8.1

Radio link entry

Indexes

linkIndex

Column	Syntax	OID
linkBandwidthAndModulation Link Modulation and Bandwidth (channel spacing). The value of this object value is computed by: 65536*modulation+bandwidth where bandwidth selection is: 0 = 3.5MHz 1 = 7MHz 2 = 14MHz 3 = 28MHz 4 = 56M…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.8.1.1
linkAcmEngineEnable This object is used to enable/disable the ACM engine	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3373.1103.80.8.1.2
linkTxUpperProfile The object (and linkTxLowerProfile object) is used to restrict the TX profile range when ACM is enabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.8.1.3
linkTxLowerProfile The object (and linkTxUpperProfile object) is used to restrict the TX profile range when ACM is enabled.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.8.1.4
linkId Link Identification (value 0..255)	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3373.1103.80.8.1.5
linkTxPwrThresh Threshold (value +3 , +15 dB) relative to nominal value of the TX power below wich the related alarm is set.	Integer32r/w Constraints: range: 3-15	.1.3.6.1.4.1.3373.1103.80.8.1.6
linkRxPwrThresh Threshold (value -40 , -99 dBm) for RX power below wich the related alarm is set.	Integer32r/w Constraints: range: -99--40	.1.3.6.1.4.1.3373.1103.80.8.1.7
linkSynchSetupProtocolEnable Synchronization Setup Protocol (SSP) control	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3373.1103.80.8.1.8
linkProfilesSetSelection Selection of the working profile set between high gain (max robustness) profile set and high throughput (max capacity) profile set. The set of profiles high gain features a greater robustness against to the set of profi…	Enumerationr/w Enumerated Values: 1 highThroughput 2 highGain	.1.3.6.1.4.1.3373.1103.80.8.1.9
linkXpicControlProcedure Set by manager to enable\disable XPIC alarm control procedure. Only for XPIC configurations.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3373.1103.80.8.1.10

Table with radio settings entries. This table contains all
parameters of a radio terminal. The content of this table
can be changed only linkRowStatus is notInService(2)

radioSettingsEntry row .1.3.6.1.4.1.3373.1103.80.9.1

Radio terminal entry

Indexes

radioSettingsIndex

Column	Syntax	OID
radioSettingsIndex Radio settings index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.9.1.1
radioSettingsRowStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.80.9.1.2
radioSettingsLabel A textual string containing information about the radio interface.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.3373.1103.80.9.1.3
radioTxFrequency Transmitted frequency in KHz. Null value means invalid frequency.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.9.1.4
radioDuplexFrequency Value of duplex frequency in KHz. -2 means not set.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.9.1.5
radioTxAttenuation Transmitter attenuation relative to nominal power (dBm).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.9.1.6
radioAtpcManual Enables/disables Atpc Manual operation. When the feature is enabled there are 2 behaviour: - (enable) after an air los the ODU transmits the maximum available power - (enable-min-power) after an air los the ODU transmit…	Enumerationr/w Enumerated Values: 1 disable 2 enable 3 enable-min-power	.1.3.6.1.4.1.3373.1103.80.9.1.7
radioAtpcPwrHigh ATPC Control - Local Rx Power High (dBm range -30 to -80) -.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.9.1.8
radioAtpcPwrLow ATPC Control - Local Rx Power Low (dBm range -30 to -80) -.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.9.1.9
radioAtpcRange Defines the range of the ATPC regulation (expressed in dB) with respect to the current value of maximum Tx output, that is intended as the upper limit of the range. A null value means no limit: the lower limit of the ra…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.9.1.10
radioFreqTableSelection RadioFrequencyTable key (channel spacing & modulation) selection.	ChannelSpacingr/w Type Values: 0 bw3M5Hz 1 bw7Mhz 2 bw14MHz 3 bw28MHz 4 bw56MHz 5 bw40MHz 6 bw112MHz 7 bw250Mhz 8 bw500Mhz 9 bw750Mhz 10 bw1000Mhz 11 bw10Mhz 12 bw20Mhz 13 bw30Mhz 14 bw50Mhz 15 bw60Mhz 16 bw80Mhz 17 bw2000Mhz 18 bw62M5hz 19 bw125Mhz 20 bw1500Mhz	.1.3.6.1.4.1.3373.1103.80.9.1.11

Table with tdm settings entries.

tdmSettingsEntry row .1.3.6.1.4.1.3373.1103.80.10.1

An entry containing tdm parameters for a particular link.

Indexes

linkIndex tdmPolIndex

Column	Syntax	OID
tdmPolIndex Polarization index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.10.1.1
tdmE1Channel Number of E1 channels. This object is used to define the capacity of E1 tributaries assigned to a given radio link. The capacity is changed in steps of E1 (2Mbit/s).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.10.1.2
tdmE1Framer This object is used to attach the framer to a given E1.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3373.1103.80.10.1.3

Table with RadioCapabilities entries: there is an entry for each 
radioTable rows.

radioCapabilitiesEntry row .1.3.6.1.4.1.3373.1103.80.11.1

RadioCapabilities entry.

Indexes

radioIndex

Column	Syntax	OID
radioCapabilitiesCapability Bit map to describe the radio features.	RadioCapability Type Values: 0 reserved 1 trafficSquelch 2 baseBandLoop 3 maxPower 4 carrierOnly 5 iQLoop 6 rfLoopGivenMod 7 rfLoopAnyMod 8 iQLoopAtRxFreq 9 atpcMinPower 10 echoCanceler	.1.3.6.1.4.1.3373.1103.80.11.1.1
radioCapabilitiesTxMinFrequency Minimum of available channel frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.11.1.2
radioCapabilitiesTxMaxFrequency Maximum of available channel frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.11.1.3
radioCapabilitiesStepFrequency Minimum frequency step in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.11.1.4
radioCapabilitiesMinPtxNominalValue Minimum nominal Ptx in dBm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.11.1.5
radioCapabilitiesMaxPtxNominalValue Maximum nominal Ptx in dBm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.11.1.6
radioCapabilitiesExtendedMinPwr Minimum extended Ptx power for fade margin.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.11.1.7

Table with RadioStatus records: one record for 1+0 configuration and
two record for 1+1 configuration.

radioStatusEntry row .1.3.6.1.4.1.3373.1103.80.12.1

RadioStatus record.

Indexes

radioIndex

Column	Syntax	OID
radioCurrentDuplexFrequency Spacing between transmitted and received frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.12.1.1
radioTxChannelSpacing Half of transmitted signal channel spacing in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.12.1.2
radioPrx Received power level (dBm).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.12.1.3
radioPtx Transmitted power level (dBm).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.12.1.4
radioNormalizedMse Normalized MSE (Mean Squared Error) is an indicator of the Signal to Noise (S/N) ratio. It's in 0.1 dB steps	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.12.1.5
radioRxActiveStatus Receiver Active status with associated Severity In 1+1 Hot Standby radio system, only one RX is active. RXs are active in other configurations of the radio system.	Enumeration Enumerated Values: 1 cleared 2 active	.1.3.6.1.4.1.3373.1103.80.12.1.6
radioTxActiveStatus Transmitter Active status with associated Severity. In 1+1 Hot Standby radio system, only one TX is active. TXs are active in other configurations of the radio system.	Enumeration Enumerated Values: 1 cleared 2 active	.1.3.6.1.4.1.3373.1103.80.12.1.7
radioCableOpenAlarm Cable connnecting ODU is open: alarm status with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.8
radioCableShortAlarm Cable connnecting ODU is in short-circuit: alarm status with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.9
radioInvalidFrequencyAlarm Invalid frequency alarm with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.10
radioBaseBandRxAlarm Base Band Rx alarm status with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.11
radioModulatorFailAlarm Modulator Fail Alarm status with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.12
radioDemodulatorFailAlarm Demodulator Fail Alarm status with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.13
radioRxPowerLowAlarm Receiver power low alarm status with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.14
radioTxPowerLowAlarm Transmitter power low alarm status with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.15
radioRemDemodulatorFailAlarm Remote Demodulator Fail Alarm status with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.16
radioVcoFailAlarm RT VCO fail alarm status with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.17
radioRxIFAgcAlarm RT Rx IF AGC fail alarm status with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.18
radioTxIFAgcAlarm RT Tx IF AGC fail alarm status with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.19
radioIduOduCommunicationAlarm Communication from IDU towards ODU is down	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.20
radioOduIduCommunicationAlarm Communication from ODU towards IDU is down	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.21
radioLocalOduAlarmSynthesis Local ODU alarm synthesis with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.22
radioRemoteOduAlarmSynthesis Local ODU alarm synthesis alarm status with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.23
radioConfigMismatchAlarm Config Mismatch alarm status with associated severity and related map.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.24
radioConfigAlarmReason Bit map to describe the Config Mismatch Alarm	ConfigMismatchReason Type Values: 0 securityMismatch 1 frequencyFailMismatch 2 frequencyAlertMismatch 3 ptxMismatch 4 channelSpacingAndModulationMismatch 5 remoteConfigurationMismatch 6 acmMismatch 7 profileSetMismatch	.1.3.6.1.4.1.3373.1103.80.12.1.25
radioRxQualityLowAlarm High BER Alarm status with associated severity.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.26
radioRxQualityWarningAlarm The RX signal is close to cause errors on payload.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.27
radioXpd Cross-Polarization Discrimination, in tenths of dB, is the difference between the received signal power of the co-polarized main beam, and it componemt received on the cross-polarized signal. This object shows an extima…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.12.1.28
radioXpicAlarm This alarm raises when the xpic configuration isn't working on the specified radioIndex. This could be due to an external issue in case of cable connection or to an internal issue in case of an integrated system. The ro…	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.12.1.29

Table with Command for maintenance of radio branch.
Objects in this table is not persistent. An Instance of this
table is created on creation of radioBranchEntry

radioMaintEntry row .1.3.6.1.4.1.3373.1103.80.13.1

Radio branch Maintenance record.

Indexes

radioIndex

Column	Syntax	OID
radioTxStatus Transmitter status control. The value transmitterOff(1) is related to a manual operation. The value permanentOff(3) is persistent across restart.	Enumerationr/w Enumerated Values: 1 transmitterOff 2 transmitterOn 3 permanentOff	.1.3.6.1.4.1.3373.1103.80.13.1.1
radioCarrierOnly Carrier only transmission control.	Enumerationr/w Enumerated Values: 1 carrierOnlyOff 2 carrierOnlyOn	.1.3.6.1.4.1.3373.1103.80.13.1.2
radioLoop Enables/disables the Radio Branch loops.	Enumerationr/w Enumerated Values: 1 loopOff 2 rfLoop 3 iqLoop 4 baseBandLoop 6 rfLoopAtFixedMod 7 baseBandLoopEthSquelch 8 rfLoopAtFixedModEthSquelch 9 iqloopEthSquelch	.1.3.6.1.4.1.3373.1103.80.13.1.3
radioRFLoopTestResult Radio branch RT loop test result.	Enumeration Enumerated Values: 0 testNone 1 testRunning 2 testNotPossible 3 testPassed 4 testFail 5 testInterrupted	.1.3.6.1.4.1.3373.1103.80.13.1.4
radioRFLoopTestPercTime Radio branch RT loop test time percentage	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.3373.1103.80.13.1.5
radioRtPsuOff It switches on/off the Rt power supply	Enumerationr/w Enumerated Values: 1 rtPsuOff 2 rtPsuOn	.1.3.6.1.4.1.3373.1103.80.13.1.6
radioLom It is used to enable the IP packet forwarding towards Radio.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3373.1103.80.13.1.7
radioXpic Enable of the cross polarization interference cancellation of this radio. The value disable is tied to a manual operation (ManOpRecord). This object is applicable only if thiis radio belongs to a 2+0 XPIC or 2+2 XPIC l…	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3373.1103.80.13.1.8

Availables channels for selected channel spacing and modulation 
(see leaf radioFreqTableSelection).

radioFreqTabEntry row .1.3.6.1.4.1.3373.1103.80.14.1

RadioFreqTab record.

Indexes

radioIndex radioFreqChannelId

Column	Syntax	OID
radioFreqChannelId Index of the table	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.14.1.1
radioFreqChannelNum Available channel number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.14.1.2
radioFreqValue Frequency related to radioFreqChannelNum.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.14.1.3

Table with available duplex frequencies. Duplex frequency is
the absolute value of difference between RX and TX frequency.

radioDuplexFreqEntry row .1.3.6.1.4.1.3373.1103.80.15.1

Duplex Frequency entry. There is an entry for each available
duplex frequency.

Indexes

radioIndex radioDuplexFreqId

Column	Syntax	OID
radioDuplexFreqId Index of the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.15.1.1
radioDuplexFreqValue Duplex frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.15.1.2

List of modulations related to channel spacing.

radioModulationEntry row .1.3.6.1.4.1.3373.1103.80.16.1

radioModulation record.

Indexes

radioIndex radioChannelSpacing

Column	Syntax	OID
radioChannelSpacing This object identifies the channel spacing.	ChannelSpacing Type Values: 0 bw3M5Hz 1 bw7Mhz 2 bw14MHz 3 bw28MHz 4 bw56MHz 5 bw40MHz 6 bw112MHz 7 bw250Mhz 8 bw500Mhz 9 bw750Mhz 10 bw1000Mhz 11 bw10Mhz 12 bw20Mhz 13 bw30Mhz 14 bw50Mhz 15 bw60Mhz 16 bw80Mhz 17 bw2000Mhz 18 bw62M5hz 19 bw125Mhz 20 bw1500Mhz	.1.3.6.1.4.1.3373.1103.80.16.1.1
radioModulationMap List of modulations in the radioChanSpacing	ModulationMap Type Values: 0 modBPSK 1 mod4QAM 2 mod8PSK 3 mod16QAM 4 mod32QAM 5 mod64QAM 6 mod128QAM 7 mod256QAM 8 mod512QAM 9 mod1024QAM 10 mod2048QAM 11 mod4096QAM	.1.3.6.1.4.1.3373.1103.80.16.1.2
radioRefModulationMap List of modulations that can be selected as reference in the radioChanSpacingId	ModulationMap Type Values: 0 modBPSK 1 mod4QAM 2 mod8PSK 3 mod16QAM 4 mod32QAM 5 mod64QAM 6 mod128QAM 7 mod256QAM 8 mod512QAM 9 mod1024QAM 10 mod2048QAM 11 mod4096QAM	.1.3.6.1.4.1.3373.1103.80.16.1.3

Table with LinkStatusEntry.

linkStatusEntry row .1.3.6.1.4.1.3373.1103.80.17.1

Link status entry

Indexes

linkIndex linkPolIndex

Column	Syntax	OID
linkPolIndex This object identifies the radio polarization. In XPIC radio link identifies one of the polarizations.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.3373.1103.80.17.1.1
linkAcmRxProfile This object reports the ACM profile number in use in the radio Rx. It is the linkAcmProfileId of linkAcmTable. Label is linkAcmProfileLabel from linkAcmTable	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.17.1.2
linkAcmTxProfile This object reports the ACM profile number in use in the radio Tx. It is the linkAcmProfileId of linkAcmTable. Label is linkAcmProfileLabel from linkAcmTable	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.17.1.3
linkAcmRxProfileLabel ASCII string used to describe current acm rx profile	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.3373.1103.80.17.1.4
linkAcmTxProfileLabel ASCII string used to describe current acm tx profile	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.3373.1103.80.17.1.5
linkAcmRxModulation This object is the type of modulation of the Rx profile in use.	BitsPerSymbol Type Values: 1 bpsBPSK 2 bps4QAM 3 bps8PSK 4 bps16QAM 5 bps32QAM 6 bps64QAM 7 bps128QAM 8 bps256QAM 9 bps512QAM 10 bps1024QAM 11 bps2048QAM 12 bps4096QAM	.1.3.6.1.4.1.3373.1103.80.17.1.6
linkAcmTxModulation This object is the type of modulation of the Tx profile in use.	BitsPerSymbol Type Values: 1 bpsBPSK 2 bps4QAM 3 bps8PSK 4 bps16QAM 5 bps32QAM 6 bps64QAM 7 bps128QAM 8 bps256QAM 9 bps512QAM 10 bps1024QAM 11 bps2048QAM 12 bps4096QAM	.1.3.6.1.4.1.3373.1103.80.17.1.7
linkAcmRxCode This object is the type of codificator of the Rx profile in use.	Enumeration Enumerated Values: 0 unknown 1 normal 2 strong	.1.3.6.1.4.1.3373.1103.80.17.1.8
linkAcmTxCode This object is the type of codificator of the Tx profile in use.	Enumeration Enumerated Values: 0 unknown 1 normal 2 strong	.1.3.6.1.4.1.3373.1103.80.17.1.9
linkTxETHCapacity This object reports (in Kbits/sec) the transmitted payload capacity used by the Ethernet	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.17.1.10
linkRxETHCapacity This object reports (in Kbits/sec) the received payload capacity used by the Ethernet	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.17.1.11
linkTxTDMCapacity This object reports the capacity in kbit/sec reserved to TDM tributaries in tx ACM profile.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.17.1.12
linkRxTDMCapacity This object reports the capacity in kbit/sec reserved to TDM tributaries in rx ACM profile.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.17.1.13
linkRescueModulation This object is the modulation used when the remote terminal is unreachable, ie traffic on radio link is down.	BitsPerSymbol Type Values: 1 bpsBPSK 2 bps4QAM 3 bps8PSK 4 bps16QAM 5 bps32QAM 6 bps64QAM 7 bps128QAM 8 bps256QAM 9 bps512QAM 10 bps1024QAM 11 bps2048QAM 12 bps4096QAM	.1.3.6.1.4.1.3373.1103.80.17.1.14
linkReducedCapacityAlarm The equipment works in reduced capacity	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.17.1.15
linkLinkTelemetryFailAlarm Fail of link telemetry communication channel with associated Severity	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.17.1.16
linkIdMismatchAlarm Link Identification Alarm with associated Severity	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.17.1.17
linkRadioEocAlarm Fail of Radio Eoc link communication channel with associated Severity	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.17.1.18
linkSetupMismatchAlarm The local setup doesn't match the setup of remote terminal	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.17.1.19
linkRescueSetupAlarm The equipment is using the setup relative to the rescue modulation	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.17.1.20
linkXpicProcedureBlockAlarm Only for XPIC equipment configurations. Equipment Controller XPIC procedure Alarm control with associated Severity	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.17.1.21
linkXpicRemTxOffAlarm Only for XPIC equipment configurations. Remote TX OFF command with associated Severity	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.17.1.22
linkRemoteIduAlarmSynthesis Synthesis of the remote IDU alarms	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.17.1.23
linkNotMatchingRadiosAlarm Radios of the link does not have matched parameters.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.17.1.24
linkConfigurationInProgress The link is being configured and the table linkSettingsTable is not available for modifying parameters.	Enumeration Enumerated Values: 1 cleared 2 active	.1.3.6.1.4.1.3373.1103.80.17.1.25
linkXpddeprecated Cross-Polarization Discrimination, in tenths of dB, is the difference between the received signal power of the co-polarized main beam, and it componemt received on the cross-polarized signal. This object shows an extima…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.17.1.26

Table with commands for maintenance of radio link.
Objects in this table is not persistent. An Instance of this
table is created on creation of linkStatusEntry

linkMaintEntry row .1.3.6.1.4.1.3373.1103.80.19.1

Radio link maintenance entry.

Indexes

linkIndex linkPolIndex

Column	Syntax	OID
linkBerStart Stop, Start (resetting errors and counters) the pattern. This item is linked to a manual operation (ManOpRecord) instance.	Enumerationr/w Enumerated Values: 1 restart 2 stop	.1.3.6.1.4.1.3373.1103.80.19.1.1
linkBaseBandLom It is used to enable the IP packet forwarding towards modems. This item is linked to a manual operation (ManOpRecord) instance.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3373.1103.80.19.1.2
linkFadeMarginMeasuredeprecated Set by manager to start/stop fade margin measure. This item is linked to a manual operation (ManOpRecord) instance. This object is deprecated and replaced by fadeMarginMeasure.	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3373.1103.80.19.1.3
linkXpicControlProcedureReset Set by manager to reset the XPIC control procedure after a blocking action.	Enumerationr/w Enumerated Values: 0 notActive 1 reset	.1.3.6.1.4.1.3373.1103.80.19.1.4

Table with Command to estimate BER  of radio equipment.
Every objects in this table is not persistent. An Instance of this
table is created on creation of linkStatusEntry

linkBerEntry row .1.3.6.1.4.1.3373.1103.80.20.1

Radio equipment BER estimate record.

Indexes

linkIndex linkPolIndex

Column	Syntax	OID
linkBerErrorCounterH High 32 bit part of the 64 bit error counter. Bit 32-63.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3373.1103.80.20.1.1
linkBerErrorCounterL Low 32 bit part of the 64 bit error counter. Bit 0-31.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3373.1103.80.20.1.2
linkBerDataCounterH High 32 bit part of the 64 bit data counter. Bit 32-63.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3373.1103.80.20.1.3
linkBerDataCounterL Low 32 bit part of the 64 bit data counter. Bit 0-31.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3373.1103.80.20.1.4
linkBerSyncLossAlarm BER sync loss alarm.	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.20.1.5
linkBerSyncLossAlarmCounter BER sync loss events counter.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.20.1.6
linkBerElapsedTime BER measure elapsed time.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.20.1.7

Table with link records.

linkAcmEntry row .1.3.6.1.4.1.3373.1103.80.21.1

ACM entries.

Indexes

linkIndex linkPolIndex linkAcmProfileId

Column	Syntax	OID
linkAcmProfileId This object identifies the profile number for the radio selected by the object linkAcmId.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.21.1.1
linkAcmProfileModulation This object is the modulation of the profile.	BitsPerSymbol Type Values: 1 bpsBPSK 2 bps4QAM 3 bps8PSK 4 bps16QAM 5 bps32QAM 6 bps64QAM 7 bps128QAM 8 bps256QAM 9 bps512QAM 10 bps1024QAM 11 bps2048QAM 12 bps4096QAM	.1.3.6.1.4.1.3373.1103.80.21.1.2
linkAcmProfileCode This object is the type of codificator of the profile.	Enumeration Enumerated Values: 1 normal 2 strong	.1.3.6.1.4.1.3373.1103.80.21.1.3
linkAcmProfileCapacity This object is used to contain total capacity of profile (in kbits/sec).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.21.1.4
linkAcmProfileLabel ASCII string used to assign a name to profile.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.3373.1103.80.21.1.5
linkAcmProfileEnable The object is used to contain if the use of this profile is enabled or disabled	Enumeration Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3373.1103.80.21.1.6
linkAcmMaxTDMCapacitydeprecated This object reports the maximum capacity that can be assigned to the TDM traffic. The capacity is specified in number of E1 (2Mbit/s). This object has been superseded by linkE1vsSTM1CapacityTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.21.1.7
linkAcmPowerScalingdeprecated This object contains the difference (in eighth of dB) between the TX power at this profile modulation and the TX power at the reference modulation. The power scaling value is achieved from the table linkPtxProfileTable.…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.21.1.8
linkAcmDownshiftThreshold The object is used to contain the downshift threshold in dB/10.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.21.1.9
linkAcmUpshiftThreshold The object is used to contain the upshift threshold in dB/10.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.21.1.10
linkAcmActiveProfile This object is used to contain the active status of this profile. The value of the object is related to linkAcmRxProfile and linkAcmTxProfile of the LinkStatusEntry.	Enumeration Enumerated Values: 1 cleared 2 activeRx 3 activeTx 4 activeBoth	.1.3.6.1.4.1.3373.1103.80.21.1.11
linkAcmTDMCapacity This object reports current TDM capacity (in kbits/sec) of the profile.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.21.1.12
linkAcmETHCapacity This object reports current ETH capacity (in Kbits/sec) of the profile.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.21.1.13
linkAcmAtpcRxPowerScalingdeprecated This object contains the difference (in eighth of dB) between the ATPC RX level thresholds at this profile modulation and the ATPC RX level thresholds at the upper modulation. This object is deprecated: see combinedRadi…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.21.1.14
linkAcmPowerRangedeprecated This object contains (in dB) the current value of ATPC range. This object is deprecated: see combinedRadioPowerScalingTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.21.1.15

List of modulation related to channel spacing.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios.

linkModulationEntry row .1.3.6.1.4.1.3373.1103.80.27.1

linkModulation record.

Indexes

linkIndex linkChannelSpacing

Column	Syntax	OID
linkChannelSpacing This object identifies the channel spacing.	ChannelSpacing Type Values: 0 bw3M5Hz 1 bw7Mhz 2 bw14MHz 3 bw28MHz 4 bw56MHz 5 bw40MHz 6 bw112MHz 7 bw250Mhz 8 bw500Mhz 9 bw750Mhz 10 bw1000Mhz 11 bw10Mhz 12 bw20Mhz 13 bw30Mhz 14 bw50Mhz 15 bw60Mhz 16 bw80Mhz 17 bw2000Mhz 18 bw62M5hz 19 bw125Mhz 20 bw1500Mhz	.1.3.6.1.4.1.3373.1103.80.27.1.1
linkModulationMap List of modulation in the linkChanSpacing	ModulationMap Type Values: 0 modBPSK 1 mod4QAM 2 mod8PSK 3 mod16QAM 4 mod32QAM 5 mod64QAM 6 mod128QAM 7 mod256QAM 8 mod512QAM 9 mod1024QAM 10 mod2048QAM 11 mod4096QAM	.1.3.6.1.4.1.3373.1103.80.27.1.2
linkRefModulationMap List of modulations that can be selected as reference in the linkChanSpacingId	ModulationMap Type Values: 0 modBPSK 1 mod4QAM 2 mod8PSK 3 mod16QAM 4 mod32QAM 5 mod64QAM 6 mod128QAM 7 mod256QAM 8 mod512QAM 9 mod1024QAM 10 mod2048QAM 11 mod4096QAM	.1.3.6.1.4.1.3373.1103.80.27.1.3

Table with RadioCapabilities entries: there is an entry for each 
radioSettingTable row.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios belonging to the link.
In 1+1 FD radio link, managers have to know the allowable 
duplex frequencies of each channel. As such, this table is declared
deprecated and replaced by combinedRadioCapabilitiesTable.

combinedRadioCapabilitiesEntry row .1.3.6.1.4.1.3373.1103.80.28.1

combinedRadioCapabilities entry.

Indexes

radioSettingsIndex

Column	Syntax	OID
combinedRadioCapabilitiesCapability Bit map to describe the radio features.	RadioCapability Type Values: 0 reserved 1 trafficSquelch 2 baseBandLoop 3 maxPower 4 carrierOnly 5 iQLoop 6 rfLoopGivenMod 7 rfLoopAnyMod 8 iQLoopAtRxFreq 9 atpcMinPower 10 echoCanceler	.1.3.6.1.4.1.3373.1103.80.28.1.1
combinedRadioCapabilitiesTxMinFrequency Minimum of available channel frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.28.1.2
combinedRadioCapabilitiesTxMaxFrequency Maximum of available channel frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.28.1.3
combinedRadioCapabilitiesStepFrequency Minimum frequency step in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.28.1.4
combinedRadioCapabilitiesMinPtxNominalValue Minimum nominal Ptx in dBm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.28.1.5
combinedRadioCapabilitiesMaxPtxNominalValue Maximum nominal Ptx in dBm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.28.1.6
combinedRadioCapabilitiesExtendedMinPwr Minimum extended Ptx power for fade margin.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.28.1.7

Availables channels for selected channel spacing and modulation 
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios.

combinedRadioFreqTabEntry row .1.3.6.1.4.1.3373.1103.80.29.1

combinedRadioFreqTab record.

Indexes

radioSettingsIndex combinedRadioFreqChannelId

Column	Syntax	OID
combinedRadioFreqChannelId Index of the table	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.29.1.1
combinedRadioFreqChannelNum Available channel number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.29.1.2
combinedRadioFreqValue Frequency related to combinedRadioFreqChannelNum.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.29.1.3

Table with available duplex frequencies. Duplex frequency is
the absolute value of difference between RX and TX frequency.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios.

combinedRadioDuplexFreqEntry row .1.3.6.1.4.1.3373.1103.80.30.1

Duplex Frequency entry. There is an entry for each available
duplex frequency.

Indexes

radioSettingsIndex combinedRadioDuplexFreqId

Column	Syntax	OID
combinedRadioDuplexFreqId Index of the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.30.1.1
combinedRadioDuplexFreqValue Duplex frequency in KHz.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.30.1.2

List of modulation related to channel spacing.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios.

combinedRadioPowerScalingEntry row .1.3.6.1.4.1.3373.1103.80.31.1

radioPowerScaling record.

Indexes

radioSettingsIndex linkAcmProfileId

Column	Syntax	OID
combinedRadioPowerScaling This object contains the difference (in eighth of dB) between the TX power at this profile modulation and the TX power at the reference modulation. The power scaling value is achieved from the table linkPtxProfileTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.31.1.1
combinedRadioAtpcRxPowerScaling This object contains the difference (in eighth of dB) between the ATPC RX level thresholds at this profile modulation and the ATPC RX level thresholds at the upper modulation.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.31.1.2
combinedRadioPowerRange This object contains (in dB) the current value of ATPC range.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.31.1.3

Table with entries containing stm-1 bulk transport parameters 
for a particular link.
For each link are present as many rows as the STM-1 that the link
can carry in bulk mode.

stm1BulkMappingEntry row .1.3.6.1.4.1.3373.1103.80.32.1

An row in stm1BulkSettingsTable.

Indexes

linkIndex stm1BulkPolIndex stm1BulkChanIndex

Column	Syntax	OID
stm1BulkPolIndex Polarization index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.32.1.1
stm1BulkChanIndex STM-1 channel index. The range of this object is from 1 to N, where N is the number of STM-1 that a link can carry in bulk mode.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.32.1.2
stm1BulkChannel Index of the stm-1 in stm1Table. The SNMP agent will accept only index of a STM-1 present in stm1Table with stm1Structure set to opaque(4).	Stm1IndexOrZeror/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.3373.1103.80.32.1.3

Table with entries containing the E1 cpacity according to the
tributaries STM-1 configured to be carried in bulk mode.

linkE1vsSTM1CapacityEntry row .1.3.6.1.4.1.3373.1103.80.33.1

An row in linkE1vsSTM1CapacityTable.

Indexes

linkIndex linkAcmProfileId linkE1vsSTM1CapacityStm1

Column	Syntax	OID
linkE1vsSTM1CapacityStm1 Number of tributaries STM-1 configured to be transported in bulk mode.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.33.1.1
linkE1vsSTM1CapacityE1 Number of E1 that can be carried by this profile according to the the tributaries STM-1 carried in bulk mode.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3373.1103.80.33.1.2

Transmitter Fail Check feature. In 1+1 HS configuration, the
radio terminal that doesn't receive signals on both receivers,
requests the remote transmitter switch.

linkTfcV2Entry row .1.3.6.1.4.1.3373.1103.80.34.1

Radio link TFC entry.

Indexes

linkIndex linkPolIndex

Column	Syntax	OID
linkTfcV2Action reset: to clear the forced switch generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).	Enumerationr/w Enumerated Values: 0 notActive 1 reset	.1.3.6.1.4.1.3373.1103.80.34.1.1
linkTfcV2Control It enables the Tx switch from remote equipment (only if 1+1 configuration and ISO system).	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.3373.1103.80.34.1.2
linkTfcV2WatchWindow Watch Window (in seconds) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).	Integer32r/w Constraints: range: 1-300	.1.3.6.1.4.1.3373.1103.80.34.1.3
linkTfcV2AlarmThreshold Alarm Threshold (number of seconds with both remote RX in fail) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).	Integer32r/w Constraints: range: 1-60	.1.3.6.1.4.1.3373.1103.80.34.1.4
linkTfcV2Alarm Transmission switch alarm generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).	SIAE-ALARM-MIBAlarmStatus Type Values: 1 cleared 2 activeReportableStatus 3 activeReportableWarning 4 activeReportableMinor 5 activeReportableMajor 6 activeReportableCritical	.1.3.6.1.4.1.3373.1103.80.34.1.5
linkTfcV2RowStatus Status of this conceptual row in linkTfcV2Table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3373.1103.80.34.1.6