RDN-CHANNEL-BONDING-MIB Table View

This table describes downstream and upstream channel bonding groups

rdnBondingGroupEntry row .1.3.6.1.4.1.4981.9.5.1

An entry provides a list of attributes for a downstream or
upstream channel in each bonding group for each mac domain.
An entry in this table exists for each channel in each defined
bonding group on each mac domain (…

Indexes

rdnBondingGroupMacIfIndex rdnBondingGroupDir rdnBondingGroupId rdnBondingGroupChanIndex

Column	Syntax	OID
rdnBondingGroupMacIfIndex This references the mac domain to which this bonding group is bound.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4981.9.5.1.1
rdnBondingGroupDir This attribute defines the direction (downstream or upstream) of the bonding group	DOCS-IF3-MIBIfDirection Type Values: 1 downstream 2 upstream	.1.3.6.1.4.1.4981.9.5.1.2
rdnBondingGroupId The bonding group identifier	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.4981.9.5.1.3
rdnBondingGroupChanIndex This is the index into a bonding groups channel list (1-8). A downstream bonding group can have up to 8 channels. an upstream bonding group can have up to 4 logical channels.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.4981.9.5.1.4
rdnBondingGroupChanId The downstream or upstream channel identifier. This value is equivalent to docsIfDownChannelId or docsIfUpChannelId	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.4981.9.5.1.5

This table lists statistic counts for each downstream 
or upstream in each bonding group for each mac domain.

rdnBondingGroupStatsEntry row .1.3.6.1.4.1.4981.9.6.1

An entry provides statistic counts for all downstream
or upstream channels in a bonding group for each mac domain.
An entry in this table exists for each channel in
each bonding group on each mac domain (each ifEntry …

Indexes

rdnBondingGroupMacIfIndex rdnBondingGroupDir rdnBondingGroupId rdnBondingGroupChanIndex

Column	Syntax	OID
rdnBondingGroupStatsChanId The downstream or upstream channel identifier. This value is equivalent to docsIfDownChannelId or docsIfUpChannelId	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.4981.9.6.1.1
rdnBondingGroupStatsOctetCount This entry contains the statistical count of the number of octets sent through this downstream or upstream for this bonding group.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4981.9.6.1.2
rdnBondingGroupStatsPacketCount This entry contains the statistical count of the number of packets sent through this downstream or number of segments sent through this upstream for this bonding group.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4981.9.6.1.3

This table shows the number of modems registered
on the downstream or upstream bonding group

rdnBondingGroupCmEntry row .1.3.6.1.4.1.4981.9.7.1

An entry provides a list of attributes for a single
downstream or upstream bonding group.
An entry in this table exists for each defined
bonding group.

Indexes

rdnBondingGroupMacIfIndex rdnBondingGroupDir rdnBondingGroupId

Column	Syntax	OID
rdnBondingGroupCmRegisteredModems The number of modems registered under this bonding group	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4981.9.7.1.1

This table describes Cable Modems operating in partial service
mode in either downstream or upstream direction due to deficiencies
in available resources to match requested performance.

rdnCmtsCmPartialServiceEntry row .1.3.6.1.4.1.4981.9.8.1

An entry provides info on CMs working in partial service mode.
Info including the Cable modem Id, MAC domain ifIndex,
the CM macAddress, Active and Inactive Channel Set ID.
The table is indexed by Cable modem Id an…

Indexes

DOCS-IF-MIBdocsIfCmtsCmStatusIndex rdnCmtsCmPSDir

Column	Syntax	OID
rdnCmtsCmPSDir This attribute defines the direction (downstream or upstream) of the bonding group	DOCS-IF3-MIBIfDirection Type Values: 1 downstream 2 upstream	.1.3.6.1.4.1.4981.9.8.1.1
rdnCmtsCmPSMacDomainIfIndex The MAC interface index under which this channel's bonding group is configured. This will be an ifType of docsCableMaclayer(127).	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4981.9.8.1.2
rdnCmtsCmPSMacAddress The MAC address of the Cable Modem in Partial Service.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4981.9.8.1.3
rdnCmtsCmPSAssignedChSetId The assigned Channel Set for the current modem .	DOCS-IF3-MIBChSetId	.1.3.6.1.4.1.4981.9.8.1.4
rdnCmtsCmPSActiveChSetId The currently active Channel Set for the current modem .	DOCS-IF3-MIBChSetId	.1.3.6.1.4.1.4981.9.8.1.5
rdnCmtsCmPSAssignedChSetList The currently assigned Channels for the current modem.	ChSetListStr Type Constraints: range: 0..176	.1.3.6.1.4.1.4981.9.8.1.6
rdnCmtsCmPSNonActiveChList The current non-active Channel(s) for the current modem.	ChSetListStr Type Constraints: range: 0..176	.1.3.6.1.4.1.4981.9.8.1.7
rdnCmtsCmPSIpv4Addr The IPv4 assigned to the current modem. If the modem is operating in a IPv6 only provisioning mode this field should return 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4981.9.8.1.8
rdnCmtsCmPSIpv6Addr This attribute represents the IPv6 address of the current CM. If the CM has no Internet IPv6 address assigned the value of this attribute is the all zeros address.	INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16	.1.3.6.1.4.1.4981.9.8.1.9