RDN-CABLE-SPECTRUM-MIB Table View

This table keeps the status of the flap modems for per CMTS.
          
This table applies to all CMTS card types.

rdnFlapCmCmtsStatusEntry row .1.3.6.1.4.1.4981.6.1.1.1.1

List of attributes for an entry in the rdnFlapCmCmtsStatusTable.

Indexes

flapCmCmtsIfIndex

Column	Syntax	OID
flapCmCmtsIfIndex The CMTS Interface Index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4981.6.1.1.1.1.1
flapListMaxSize The maximum number of flap modems. The user could configure this number according to the number of downstreams and the number of modem line cards in the CMTS. The number can range from 1 to 8191. The default value is…	modemsInteger32r/w Constraints: range: 1-8191	.1.3.6.1.4.1.4981.6.1.1.1.1.2
flapListCurrentSize The current number of modems in the flap list. Its value will be less than or equal to flapListMaxSize.	modemsUnsigned32 Constraints: range: 0-8191	.1.3.6.1.4.1.4981.6.1.1.1.1.3
flapAgingOutTime The age out time in minutes for modems in the flap table. The number of minutes range from 1 to 86400. The default value is 1440.	minutesInteger32r/w Constraints: range: 1-86400	.1.3.6.1.4.1.4981.6.1.1.1.1.4
flapInsertionTime The interval of time that begins when the cable modem initially ranges, reboots, and ends when it starts initial maintenance again. If the interval of time is less than what is specified in flapInsertionTime, the flapC…	secondsInteger32r/w Constraints: range: 1-86400	.1.3.6.1.4.1.4981.6.1.1.1.1.5
flapMissThreshold Specifies the maximum threshold for the number of consecutive miss counts during a polling cycle. If the flap miss counts goes over this threshold, the modem will be added into the flap list. Polling i…	modemInteger32r/w Constraints: range: 1-12	.1.3.6.1.4.1.4981.6.1.1.1.1.6
flapPowerAdjThreshold The power adjustment threshold for a CM to raise and lower it's transmit power during normal operation. When a modem's power adjustment goes above or below the flapPowerAdjThreshold the CM will be added …	dBInteger32r/w Constraints: range: 1-10	.1.3.6.1.4.1.4981.6.1.1.1.1.7
flapListPercentageThreshold The percentage CM miss threshold. If CM miss percentage goes over this threshold and flapListTrapEnable is set, a flap list trap will be send out to notify this event	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.4981.6.1.1.1.1.8
flapListTrapEnable This object controls flap list trap. If its value is set to enabled(1), a trap will be sent out when the CM miss percentage goes over the flapListPercentageThreshold; Otherwise no flap list trap will be sent out. By de…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4981.6.1.1.1.1.9

This table keeps the records of modem state changes. 
An entry can be deleted from the table but can not be 
added to the table.
          
This table applies to all CMTS card types.

rdnFlapCmEntry row .1.3.6.1.4.1.4981.6.1.1.2.1

List of attributes for an entry in the rdnFlapTable.

Indexes

flapCmIndex

Column	Syntax	OID
flapCmIndex Index for Cable Modem.	Integer32 Constraints: range: 1-1048575	.1.3.6.1.4.1.4981.6.1.1.2.1.1
cmtsIfIndex The CMTS Interface Index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4981.6.1.1.2.1.2
flapCmMacAddress MAC address of the Cable Modem's Cable interface. Identifies a flap-list entry for a flapping Cable Modem.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4981.6.1.1.2.1.3
flapCmUpstreamChSet The list of the upstream channels.This shows the list of UCID's. The CMTS detects a flapping Cable Modem from its Cable upstream interface.	DOCS-IF3-MIBChannelList Type Constraints: range: 0..255	.1.3.6.1.4.1.4981.6.1.1.2.1.4
flapCmDownstreamChSet The list of the downstream channels.This shows the list of DCID's.	DOCS-IF3-MIBChannelList Type Constraints: range: 0..255	.1.3.6.1.4.1.4981.6.1.1.2.1.5
flapCmInsertionFails When the Cable Modem initially ranges, reboots and initially ranges again within the specified insertion time, this counter will increment. The cmFlapCounts increment along with this counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.1.2.1.6
flapCmHits The number of times the CMTS receives the Ranging request from the Cable Modem.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.1.2.1.7
flapCmMisses The number of times the CMTS misses the Ranging request from the Cable Modem. The CMTS can check up to 16 consecutive times for a ranging request message during one polling cycle. Misses are not desirab…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.1.2.1.8
flapCmPowerAdjustments When the power adjustment changed above or below the power adjustment threshold this counter will increment. The Flap Count (cmFlapCounts) will increment when this counter increments.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.1.2.1.9
cmFlapCounts The total number of times a CM flaps Under following three situations, this counter will increase: (1) When flapCmInsertionFails is increased the flap counts will increase. (2) When the CMTS receives the number …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.1.2.1.10
cmLastFlapTime The last time stamp cm flaps	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4981.6.1.1.2.1.11
cmFlapCreateTime The time stamp when new flap CM is added to the table.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4981.6.1.1.2.1.12
cmFlapRowStatus Controls and reflects the status of rows in this table. When a new flap cable modem is detected, and does not exist in flap list and flapListCurrentSize is less than flapListMaxSize, an entry will be cre…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4981.6.1.1.2.1.13

This table holds the CM logical channel flap parameters incase of the US bonded modmes.
This table applies to DOCSIS 3.0 CMTS card types.

rdnFlapCmtsCmUsStatusEntry row .1.3.6.1.4.1.4981.6.1.1.5.1

List of attributes for an entry in the rdnFlapCmtsCmUsStatusTable.

Indexes

rdnFlapCmtsCmIndex rdnFlapCmtsCmUsIfIndex

Column	Syntax	OID
rdnFlapCmtsCmIndex Index for the cable modem registered on DOCSIS 3.0 CMTS card.	Integer32 Constraints: range: 1-1048575	.1.3.6.1.4.1.4981.6.1.1.5.1.1
rdnFlapCmtsCmUsIfIndex The CMTS US channel interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4981.6.1.1.5.1.2
rdnFlapCmtsCmMacAddress MAC address of the US bonded Cable Modem. This identifies a flap-list entry for a flapping Cable Modem per logical channel.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4981.6.1.1.5.1.3
rdnFlapCmtsCmInsertionFails When the Cable Modem initially ranges, reboots and initially ranges again within the specified insertion time,this counter will increment. The cmFlapCounts increment along with this counter.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.1.5.1.4
rdnFlapCmtsCmHits The number of times the CMTS receives the Ranging request from the Cable Modem.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.1.5.1.5
rdnFlapCmtsCmMisses The number of times the CMTS misses the Ranging request from the Cable Modem. The CMTS can check up to 16 consecutive times for a ranging request message during one polling cycle.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.1.5.1.6
rdnFlapCmtsCmPowerAdjustments When the power adjustment changed above or below the power adjustment threshold this counter will increment.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.1.5.1.7
rdnFlapCmtsCmFlapCounts The total number of times a CM flaps Under following three situations. This counter will increase (1) When flapCmInsertionFails is increased the flap counts will increase. (2) When the CMTS receives the number of consec…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.1.5.1.8

This table contains statistics related to Advanced Spectrum
Management's Frequency and Modulation Agility feature
          
This table applies to all CMTS card types.
          
For CMTS 2x8 cards, frequency and modulation agility
hop decisions are made on the basis of SNR measurements.   
For older, 1x8 and 1x4 cards, hop decisions are made on the 
basis of error thresholds, or modem flapping.
          
This table displays all upstream channels, regardless of whether
they members of spectrum groups, or not.   Agility actions
can take place only for those channels belonging to spectrum
groups that have hop actions configured.

rdnSpectrumAgilityStatisticsEntry row .1.3.6.1.4.1.4981.6.1.3.1

List of objects in a row of rdnSpectrumAgilityStatisticsTable
The index values for this table are the ifIndex values for
upstream physical channels

Indexes

IF-MIBifIndex

Column	Syntax	OID
rdnSpectrumQualityCurrentChannelState Current Channel Status: normal: channel quality is within rdnSnrThresholdValue. This is the optimum operational status of the channel. impaired: channel quality is below rdnSnrT…	Enumeration Enumerated Values: 1 normal 2 impaired 3 pending	.1.3.6.1.4.1.4981.6.1.3.1.1
rdnSpectrumQualityLastStateTransitionTime Timestamp indicating when rdnSpectrumQualityCurrentChannelState made its most recent transition	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4981.6.1.3.1.2
rdnSpectrumQualityElapsedTimeCurrentState Elapsed time in tenths of seconds that the channel has been in its current state (rdnSpectrumQualityCurrentChannelState)	tenths of secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.3.1.3
rdnSpectrumQualityNumberStateTransitions The number of transitions in rdnSpectrumQualityCurrentChannelState that have occurred since the time of system boot, or since the time of the last statistics reset (rdnSpectrumQualityResetStatistics)	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4981.6.1.3.1.4
rdnSpectrumQualityResetStatistics Setting this object to TRUE(1) will reset rdnSpectrumQualityNumberStateTransitions. No other table objects are affected. A query of this object is not meaningful, but will always return FALSE	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4981.6.1.3.1.5