RC-PIM-MIB Table View

The (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table.

rcPimInterfaceEntry row .1.3.6.1.4.1.2272.1.75.1.2.1

An entry (conceptual row) in the rcPimInterfaceTable.

Indexes

rcPimInterfaceIfIndex

Column	Syntax	OID
rcPimInterfaceIfIndex The ifIndex value of this PIM interface.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2272.1.75.1.2.1.1
rcPimInterfaceAddress The IP address of the PIM interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.75.1.2.1.2
rcPimInterfaceNetMask The network mask for the IP address of the PIM interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.75.1.2.1.3
rcPimInterfaceMode The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1.	Enumerationr/w Enumerated Values: 1 dense 2 sparse 3 sparseDense 4 ssm	.1.3.6.1.4.1.2272.1.75.1.2.1.4
rcPimInterfaceDR The Designated Router on this PIM interface. For point- to-point interfaces, this object has the value 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.75.1.2.1.5
rcPimInterfaceHelloInterval The frequency at which PIM Hello messages are transmitted on this interface.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.75.1.2.1.6
rcPimInterfaceStatus The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.75.1.2.1.7
rcPimInterfaceJoinPruneInterval The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the rcPimJoinPruneInterval.	secondsInteger32r/w Constraints: range: 1-18724	.1.3.6.1.4.1.2272.1.75.1.2.1.8
rcPimInterfaceCBSRPreference The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.2272.1.75.1.2.1.9
rcPimInterfaceCBSREnable Enable/disable Candidate BSR on rcPim local interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2272.1.75.1.2.1.10

The (conceptual) table listing the router's PIM neighbors.

rcPimNeighborEntry row .1.3.6.1.4.1.2272.1.75.1.3.1

An entry (conceptual row) in the rcPimNeighborTable.

Indexes

rcPimNeighborAddress

Column	Syntax	OID
rcPimNeighborAddress The IP address of the PIM neighbor for which this entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.75.1.3.1.1
rcPimNeighborIfIndex The value of ifIndex for the interface used to reach this PIM neighbor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.75.1.3.1.2
rcPimNeighborUpTime The time since this PIM neighbor (last) became a neighbor of the local router.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.75.1.3.1.3
rcPimNeighborExpiryTime The minimum time remaining before this PIM neighbor will be aged out.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.75.1.3.1.4

The (conceptual) table listing PIM information for
candidate Rendezvous Points (RPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements.  When
the local router is not the BSR, this information is
obtained from received RP-Set messages.

rcPimRPSetEntry row .1.3.6.1.4.1.2272.1.75.1.6.1

An entry (conceptual row) in the rcPimRPSetTable.

Indexes

rcPimRPSetComponent rcPimRPSetGroupAddress rcPimRPSetGroupMask rcPimRPSetAddress

Column	Syntax	OID
rcPimRPSetGroupAddress The IP multicast group address which, when combined with rcPimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.75.1.6.1.1
rcPimRPSetGroupMask The multicast group address mask which, when combined with rcPimRPSetGroupAddress, gives the group prefix for which this entry contains information about the Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.75.1.6.1.2
rcPimRPSetAddress The IP address of the Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.75.1.6.1.3
rcPimRPSetHoldTime The holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0.	secondsInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.75.1.6.1.4
rcPimRPSetExpiryTime The minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.75.1.6.1.5
rcPimRPSetComponent A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2272.1.75.1.6.1.6

The (conceptual) table listing the IP multicast groups for
which the local router is to advertise itself as a
Candidate-RP when the value of rcPimCandidateRPHoldTime is
non-zero.  If this table is empty, then the local router
will advertise itself as a Candidate-RP for all groups
(providing the value of rcPimCandidateRPHoldTime is non-
zero).

rcPimCandidateRPEntry row .1.3.6.1.4.1.2272.1.75.1.11.1

An entry (conceptual row) in the rcPimCandidateRPTable.

Indexes

rcPimCandidateRPGroupAddress rcPimCandidateRPGroupMask rcPimCandidateRPAddress

Column	Syntax	OID
rcPimCandidateRPGroupAddress The IP multicast group address which, when combined with rcPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.75.1.11.1.1
rcPimCandidateRPGroupMask The multicast group address mask which, when combined with rcPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.75.1.11.1.2
rcPimCandidateRPAddress The (unicast) address of the interface which will be advertised as a Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.75.1.11.1.3
rcPimCandidateRPRowStatus The status of this row, by which new entries may be created, or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.75.1.11.1.4

The (conceptual) table containing objects specific to a PIM
domain.  One row exists for each domain to which the router
is connected.

rcPimComponentEntry row .1.3.6.1.4.1.2272.1.75.1.12.1

An entry (conceptual row) in the rcPimComponentTable.

Indexes

rcPimComponentIndex

Column	Syntax	OID
rcPimComponentIndex A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2272.1.75.1.12.1.1
rcPimComponentBSRAddress The IP address of the bootstrap router (BSR) for the local PIM region.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.75.1.12.1.2
rcPimComponentBSRExpiryTime The minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component sends an RP-Set message. For other routers, this is the time u…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.75.1.12.1.3
rcPimComponentCRPHoldTime The holdtime of the component when it is a candidate RP in the local domain. The value of 0 is used to indicate that the local system is not a Candidate-RP.	secondsInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.75.1.12.1.4
rcPimComponentStatus The status of this entry. Creating the entry creates another protocol instance; destroying the entry disables a protocol instance.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.75.1.12.1.5