RC-PIM-MIB

        Enterprise MIB for the Accelar product family.
    
Last revised
Identity
rcPimMib
Base OID
1.3.6.1.4.1.2272.1.75.0
Imported Objects
IF-MIB InterfaceIndexOrZero
RAPID-CITY rcPim
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI experimental Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks
SNMPv2-TC RowStatus
Net-SNMP examples using the nortel MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RC-PIM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RC-PIM-MIB::rcPimMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RC-PIM-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RC-PIM-MIB::rcPimMib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (46)
.1.3.6.1.4.1.2272.1.75.0
.1.3.6.1.4.1.2272.1.75.1
.1.3.6.1.4.1.2272.1.75.1.1
secondsInteger32
.1.3.6.1.4.1.2272.1.75.1.1.1
.1.3.6.1.4.1.2272.1.75.1.11
.1.3.6.1.4.1.2272.1.75.1.11.1
.1.3.6.1.4.1.2272.1.75.1.11.1.1
.1.3.6.1.4.1.2272.1.75.1.11.1.2
.1.3.6.1.4.1.2272.1.75.1.11.1.3
.1.3.6.1.4.1.2272.1.75.1.11.1.4
.1.3.6.1.4.1.2272.1.75.1.12
.1.3.6.1.4.1.2272.1.75.1.12.1
.1.3.6.1.4.1.2272.1.75.1.12.1.1
.1.3.6.1.4.1.2272.1.75.1.12.1.2
.1.3.6.1.4.1.2272.1.75.1.12.1.3
secondsInteger32
.1.3.6.1.4.1.2272.1.75.1.12.1.4
.1.3.6.1.4.1.2272.1.75.1.12.1.5
.1.3.6.1.4.1.2272.1.75.1.2
.1.3.6.1.4.1.2272.1.75.1.2.1
.1.3.6.1.4.1.2272.1.75.1.2.1.1
Enumeration
.1.3.6.1.4.1.2272.1.75.1.2.1.10
.1.3.6.1.4.1.2272.1.75.1.2.1.2
.1.3.6.1.4.1.2272.1.75.1.2.1.3
Enumeration
.1.3.6.1.4.1.2272.1.75.1.2.1.4
.1.3.6.1.4.1.2272.1.75.1.2.1.5
.1.3.6.1.4.1.2272.1.75.1.2.1.6
.1.3.6.1.4.1.2272.1.75.1.2.1.7
secondsInteger32
.1.3.6.1.4.1.2272.1.75.1.2.1.8
Integer32
.1.3.6.1.4.1.2272.1.75.1.2.1.9
.1.3.6.1.4.1.2272.1.75.1.3
.1.3.6.1.4.1.2272.1.75.1.3.1
.1.3.6.1.4.1.2272.1.75.1.3.1.1
.1.3.6.1.4.1.2272.1.75.1.3.1.2
.1.3.6.1.4.1.2272.1.75.1.3.1.3
.1.3.6.1.4.1.2272.1.75.1.3.1.4
.1.3.6.1.4.1.2272.1.75.1.6
.1.3.6.1.4.1.2272.1.75.1.6.1
.1.3.6.1.4.1.2272.1.75.1.6.1.1
.1.3.6.1.4.1.2272.1.75.1.6.1.2
.1.3.6.1.4.1.2272.1.75.1.6.1.3
secondsInteger32
.1.3.6.1.4.1.2272.1.75.1.6.1.4
.1.3.6.1.4.1.2272.1.75.1.6.1.5
.1.3.6.1.4.1.2272.1.75.1.6.1.6
.1.3.6.1.4.1.2272.1.75.2
.1.3.6.1.4.1.2272.1.75.2.1
.1.3.6.1.4.1.2272.1.75.2.2
Compliance Statements (2)

OID .1.3.6.1.4.1.2272.1.75.2.1.2
The compliance statement for routers running PIM Sparse
Mode and implementing the PIM MIB.
Required groups
Object refinements
ObjectAccessSyntaxDescription
rcPimInterfaceStatus readonly
Write access is not required.

OID .1.3.6.1.4.1.2272.1.75.2.1.3
The compliance statement for routers running PIM Dense Mode
and implementing the PIM MIB.
Required groups
Object refinements
ObjectAccessSyntaxDescription
rcPimInterfaceStatus readonly
Write access is not required.