RC-IGMP-MIB Table View

The (conceptual) table listing the multicast
groups configured in the device.

rcIgmpGroupEntry row .1.3.6.1.4.1.2272.1.8.6.1

An entry (conceptual row) representing an
Igmp group.

Indexes

rcIgmpGroupIpAddress rcIgmpGroupMembers

Column	Syntax	OID
rcIgmpGroupIpAddress Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.6.1.1
rcIgmpGroupMembers IP Address of a source that has sent group report wishing to join this group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.6.1.2
rcIgmpGroupInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.6.1.3
rcIgmpGroupExpiration Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.6.1.4
rcIgmpGroupIfIndex An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.8.6.1.5
rcIgmpGroupUserId User-id sending this group	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.8.6.1.6
rcIgmpGroupMemberState Used for IGAP, to indicated member state.	Enumeration Enumerated Values: 1 noState 2 auth 3 accStart 4 authAndAcctStart 5 authAndAcctDisabled	.1.3.6.1.4.1.2272.1.8.6.1.7
rcIgmpGroupSessionTime Used for IGAP, to indicated the session time in seconds for the member. Session time is started after traffic is available to member. It can be also called AccountingTime since its values correspondes to the accounting …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.8.6.1.8

The table listing the multicast groups
traversing the snoop enabled router

rcIgmpSnoopTraceEntry row .1.3.6.1.4.1.2272.1.30.13.1

The entry listing the multicast groups
traversing the snoop enabled router

Indexes

rcIgmpSnoopGrpAddr rcIgmpSnoopSrcAddr rcIgmpSnoopOutVlan

Column	Syntax	OID
rcIgmpSnoopGrpAddr ip mcast addr of grp traversing the router	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.13.1.1
rcIgmpSnoopSrcAddr Ip src addr of the mcast grp address	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.13.1.2
rcIgmpSnoopOutVlan Egress vlan id for the mcast group	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.30.13.1.3
rcIgmpSnoopInPort Ingress port for the mcast grp	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.30.13.1.4
rcIgmpSnoopInVlan Ingress vlan id for the mcast source	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.30.13.1.5
rcIgmpSnoopOutPort Egress port of the mcast grp	RAPID-CITYPortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.30.13.1.6
rcIgmpSnoopType The port type on which the snoop entry is learnt	Enumeration Enumerated Values: 1 network 2 access	.1.3.6.1.4.1.2272.1.30.13.1.7
rcIgmpSnoopOutLPort Egress logical port list of the mcast grp	RAPID-CITYLPortSet Type Constraints: range: 0..256	.1.3.6.1.4.1.2272.1.30.13.1.8

The (conceptual) table listing the multicast
groups configured in the device.

rcIgmpNewGroupEntry row .1.3.6.1.4.1.2272.1.30.14.1

An entry (conceptual row) representing an
Igmp group.

Indexes

rcIgmpNewGroupIpAddress rcIgmpNewGroupMembers rcIgmpNewGroupInPort

Column	Syntax	OID
rcIgmpNewGroupIpAddress Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.14.1.1
rcIgmpNewGroupMembers IP Address of a source that has sent group report wishing to join this group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.14.1.2
rcIgmpNewGroupInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.30.14.1.3
rcIgmpNewGroupExpiration Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.14.1.4
rcIgmpNewGroupIfIndex An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.30.14.1.5
rcIgmpNewGroupUserId User-id sending this group	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.30.14.1.6
rcIgmpNewGroupMemberState Used for IGAP, to indicated member state.	Enumeration Enumerated Values: 1 noState 2 auth 3 accStart 4 authAndAcctStart 5 authAndAcctDisabled	.1.3.6.1.4.1.2272.1.30.14.1.7
rcIgmpNewGroupSessionTime Used for IGAP, to indicated the session time in seconds for the member. Session time is started after traffic is available to member. It can be also called AccountingTime since its values correspondes to the accounting …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.14.1.8
rcIgmpNewGroupActualInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. The value of object is same as rcIgmpNewGroupInPort except when rcIgmpNewGroupInPo…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.30.14.1.9
rcIgmpNewGroupL2Isid L2 ISID of the cvlan.	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.30.14.1.10

The (conceptual) table listing the interfaces on which IGMP
is enabled.

rcIgmpInterfaceEntry row .1.3.6.1.4.1.2272.1.30.15.1

An entry (conceptual row) representing an interface on
which IGMP is enabled.

Indexes

rcIgmpInterfaceIfIndex

Column	Syntax	OID
rcIgmpInterfaceIfIndex The interface for which IGMP is enabled.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.30.15.1.1
rcIgmpInterfaceQueryInterval The frequency at which IGMP Host-Query packets are transmitted on this interface.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.15.1.2
rcIgmpInterfaceStatus The activation of a row enables IGMP on the interface. The destruction of a row disables IGMP on the interface.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.15.1.3
rcIgmpInterfaceVersion The version of IGMP which is running on this interface. This object can be used to configure a router capable of running either value. For IGMP to function correctly, all routers on a LAN must be configured to run the …	Enumerationr/w Enumerated Values: 1 version1 2 version2 3 version3	.1.3.6.1.4.1.2272.1.30.15.1.4
rcIgmpInterfaceQuerier The address of the IGMP Querier on the IP subnet to which this interface is attached.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.15.1.5
rcIgmpInterfaceQueryMaxResponseTime The maximum query response time advertised in IGMPv2 queries on this interface.	tenth of secondsInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.30.15.1.6
rcIgmpInterfaceWrongVersionQueries The number of queries received whose IGMP version does not match rcIgmpInterfaceVersion. IGMP requires that all routers on a LAN be configured to run the same version of IGMP. Thus, if any queries are received with th…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.30.15.1.10
rcIgmpInterfaceJoins The number of times a group membership has been added on this interface; that is, the number of times an entry for this interface has been added to the Cache Table. This object gives an indication of the amount of IGMP…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.30.15.1.11
rcIgmpInterfaceRobustness The robustness variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.	Integer32r/w Constraints: range: 2-255	.1.3.6.1.4.1.2272.1.30.15.1.14
rcIgmpInterfaceLastMembQueryIntvl The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may…	tenths of secondsInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.30.15.1.15
rcIgmpInterfaceOperVersion The operational version of IGMP which is running on this interface.	Enumeration Enumerated Values: 1 version1 2 version2 3 version3	.1.3.6.1.4.1.2272.1.30.15.1.16
rcIgmpInterfaceOtherQuerierPresentTimeout A timeout interval.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.15.1.17
rcIgmpInterfaceSendQuery IGMP send query flag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.15.1.18

The (conceptual) table listing the IP multicast groups for
which there are members on a particular interface.

rcIgmpCacheEntry row .1.3.6.1.4.1.2272.1.30.16.1

An entry (conceptual row) in the rcIgmpCacheTable.

Indexes

rcIgmpCacheAddress rcIgmpCacheIfIndex

Column	Syntax	OID
rcIgmpCacheAddress The IP multicast group address for which this entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.16.1.1
rcIgmpCacheIfIndex The interface for which this entry contains information for an IP multicast group address.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2272.1.30.16.1.2
rcIgmpCacheLastReporter The IP address of the source of the last membership report received for this IP Multicast group address on this interface. If no membership report has been received, this object has the value 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.16.1.4
rcIgmpCacheExpiryTime The minimum amount of time remaining before this entry will be aged out.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.30.16.1.6
rcIgmpCacheVersion1HostTimer The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hearing any IGMPv1 Membership Report, this value is reset to t…	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.16.1.8

The (conceptual) table listing the mcast-vlan-registration groups.

rcIgmpMvrGroupEntry row .1.3.6.1.4.1.2272.1.30.17.1

An entry (conceptual row) in the rcIgmpMvrGroupTable.

Indexes

rcIgmpMvrGroupGroupAddress rcIgmpMvrGroupVlanId

Column	Syntax	OID
rcIgmpMvrGroupGroupAddress The group's multicast ip address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.17.1.1
rcIgmpMvrGroupVlanId The igmp snoop enabled vlan this group belongs to.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.30.17.1.2
rcIgmpMvrGroupIgmpVersion Version of this group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.17.1.3
rcIgmpMvrGroupLivingTime Living time of this group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.17.1.4

The (conceptual) table listing the mcast vlans
in mcast-vlan-registration.

rcIgmpMvrVlanEntry row .1.3.6.1.4.1.2272.1.30.18.1

An entry (conceptual row) in the rcIgmpMvrVlanTable.

Indexes

rcIgmpMvrVlanMvrVlanId

Column	Syntax	OID
rcIgmpMvrVlanMvrVlanId The id of mcast-vlan.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.30.18.1.1
rcIgmpMvrVlanMvrVlanProxy working mode of this mcast-vlan, proxy or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.30.18.1.2
rcIgmpMvrVlanSourcePort source port for this mcast-vlan.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.18.1.3
rcIgmpMvrVlanSourceAddress querier address for the source in this mcast-vlan.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.18.1.4

The (conceptual) table listing the mcast vlans and receiver vlans
in mcast-vlan-registration.

rcIgmpMvrReceiverEntry row .1.3.6.1.4.1.2272.1.30.19.1

An entry (conceptual row) in the rcIgmpMvrGroupTable.

Indexes

rcIgmpMvrReceiverVlanId

Column	Syntax	OID
rcIgmpMvrReceiverVlanId The id of receiver vlan that bound to mcast-vlan.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2272.1.30.19.1.1
rcIgmpMvrReceiverRowStatus Used to create/delete entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.19.1.2

The (conceptual) table listing the Name and the Port List
for a specific IGMP Access Control List.

rcIgmpAccessControlListInfoEntry row .1.3.6.1.4.1.2272.1.30.20.1

An entry (conceptual row) in the rcIgmpAccessControlListInfoTable.

Indexes

rcIgmpAccessControlListInfoACLIndex

Column	Syntax	OID
rcIgmpAccessControlListInfoACLIndex An index value that uniquely identifies an IGMP Access Control List.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.30.20.1.1
rcIgmpAccessControlListInfoName Name of the IGMP Access Control List.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.30.20.1.2
rcIgmpAccessControlListInfoPortList List of ports that use this IGMP Access Control List.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.30.20.1.3
rcIgmpAccessControlListInfoRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.20.1.4

The (conceptual) table listing the conditions (IP ranges,
subnets) for each IGMP Access Control List.

rcIgmpAccessControlListConditionsEntry row .1.3.6.1.4.1.2272.1.30.21.1

An entry (conceptual row) in the
rcIgmpAccessControlListConditionsTable.

Indexes

rcIgmpAccessControlListConditionsACLIndex rcIgmpAccessControlListConditionsIpAddrStart rcIgmpAccessControlListConditionsIpAddrEndOrMask

Column	Syntax	OID
rcIgmpAccessControlListConditionsACLIndex An index value that uniquely identifies an IGMP Access Control List.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.2272.1.30.21.1.1
rcIgmpAccessControlListConditionsIpAddrStart This is the IP address of the subnet or the Start address of the IP range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.21.1.2
rcIgmpAccessControlListConditionsIpAddrEndOrMask This is the mask of the subnet or the End address of the IP range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.21.1.3
rcIgmpAccessControlListConditionsType This value specifies if the stored entry is a subnet or an IP range.	Enumerationr/w Enumerated Values: 1 range 2 mask	.1.3.6.1.4.1.2272.1.30.21.1.4
rcIgmpAccessControlListConditionsRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.21.1.5

The (conceptual) table listing the IGMP static entries installed for each vlan

rcIgmpStaticEntriesEntry row .1.3.6.1.4.1.2272.1.30.22.1

An entry (conceptual row) in the
rcIgmpStaticEntriesTable.

Indexes

rcIgmpStaticEntriesVlanId rcIgmpStaticEntriesGroupAddress

Column	Syntax	OID
rcIgmpStaticEntriesVlanId VlanId where this entry is installed.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.2272.1.30.22.1.1
rcIgmpStaticEntriesGroupAddress This is the IP address of the IGMP group that is statically allowed on this vlan and port list.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.22.1.2
rcIgmpStaticEntriesPortList List of ports where this IGMP Static Entry is installed.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.30.22.1.3
rcIgmpStaticEntriesRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.30.22.1.4

The (conceptual) table listing the multicast groups configured in
the device.

rcIgmpGroupExtEntry row .1.3.6.1.4.1.2272.1.30.23.1

An entry (conceptual row) representing an Igmp group.

Indexes

rcIgmpGroupExtIpAddress rcIgmpGroupExtSourceAddress rcIgmpGroupExtMembers

Column	Syntax	OID
rcIgmpGroupExtIpAddress Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.23.1.1
rcIgmpGroupExtSourceAddress IP Address of the source.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.23.1.2
rcIgmpGroupExtMembers IP Address of a source that has sent group report wishing to join this group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.23.1.3
rcIgmpGroupExtInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.30.23.1.4
rcIgmpGroupExtExpiration Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.23.1.5
rcIgmpGroupExtIfIndex An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.30.23.1.6
rcIgmpGroupExtUserId User-id sending this group	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.30.23.1.7
rcIgmpGroupExtMemberState Used for IGAP, to indicated member state.	Enumeration Enumerated Values: 1 noState 2 auth 3 accStart 4 authAndAcctStart 5 authAndAcctDisabled	.1.3.6.1.4.1.2272.1.30.23.1.8
rcIgmpGroupExtSessionTime Used for IGAP, to indicated the session time in seconds for the member. Session time is started after traffic is available to member. It can be also called AccountingTime since its value corresponds to the accounting d…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.23.1.9
rcIgmpGroupExtMode Address mode.	Enumeration Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.2272.1.30.23.1.10

The (conceptual) table listing the Igmpv3 specific data
corresponding to each interface, port and
 multicast group pair on a Router.

rcIgmpv3CacheEntry row .1.3.6.1.4.1.2272.1.30.24.1

An entry (conceptual row) representing an Igmpv3 Group.

Indexes

rcIgmpv3CacheEntryGroupAddress rcIgmpv3CacheEntryIfIndex rcIgmpv3CacheEntryInPort

Column	Syntax	OID
rcIgmpv3CacheEntryGroupAddress Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.24.1.1
rcIgmpv3CacheEntryIfIndex An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.30.24.1.2
rcIgmpv3CacheEntryInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.30.24.1.3
rcIgmpv3CacheEntryModeExpiryTimer This value is applicable only to IGMPv3-compatible nodes and represents the time remaining before the interface EXCLUDE state expires and the interface state transitions to INCLUDE mode. This value can never be greater…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.24.1.4
rcIgmpv3CacheEntryVersion1HostTimer The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. This entry only applies to IGMPv1 hosts. Upon …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.24.1.5
rcIgmpv3CacheEntryVersion2HostTimer The time remaining until the local router will assume that there are no longer any IGMP version 2 members on the IP subnet attached to this interface. Upon hearing any IGMPv2 Membership Report, this…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.24.1.6
rcIgmpv3CacheEntrySourceFilterMode The current group state, applicable to IGMPv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE.	Enumeration Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.2272.1.30.24.1.7

The (conceptual) table listing the Source List entries
corresponding to each interface and multicast
group pair on a Router.

rcIgmpRouterSrcListEntry row .1.3.6.1.4.1.2272.1.30.25.1

An entry (conceptual row) representing an
Igmp Source.

Indexes

rcIgmpRouterSrcListGroupAddress rcIgmpRouterSrcListIfIndex rcIgmpRouterSrcListInPort rcIgmpRouterSrcListHostAddress rcIgmpRouterSrcListMemberAddress

Column	Syntax	OID
rcIgmpRouterSrcListGroupAddress The IP multicast group address for which this entry contains information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.25.1.1
rcIgmpRouterSrcListIfIndex The interface for which this entry contains information for an IP multicast group address.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.30.25.1.2
rcIgmpRouterSrcListInPort An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports for this source.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.30.25.1.3
rcIgmpRouterSrcListHostAddress The host address to which this entry corresponds.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.25.1.4
rcIgmpRouterSrcListMemberAddress IP Address of a member that has sent source specific report wishing to join this source.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.25.1.5
rcIgmpRouterSrcListExpire This value indicates the relevance of the SrcList entry, whereby a non-zero value indicates this is an INCLUDE state value, and a zero value indicates this to be an EXCLUDE state value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.25.1.6
rcIgmpRouterSrcListMode The current member state, applicable to IGMPv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE.	Enumeration Enumerated Values: 1 include 2 exclude	.1.3.6.1.4.1.2272.1.30.25.1.7
rcIgmpRouterSrcListMemberExpire This value indicates the time until the member for this source will expire	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.25.1.8

This table contains information related to multicast streams
received by the switch.

rcIgmpStreamEntry row .1.3.6.1.4.1.2272.1.30.27.1

Indexes

rcIgmpStreamIfIndex rcIgmpStreamGrpAddr rcIgmpStreamSourceAddr

Column	Syntax	OID
rcIgmpStreamIfIndex Interface index where the multicast trafic is received.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.30.27.1.1
rcIgmpStreamGrpAddr Destination IP address of the multicast stream.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.27.1.2
rcIgmpStreamSourceAddr Source IP address of the multicast stream.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.27.1.3
rcIgmpStreamExpiryTime Time interval left until the multicast stream expires.	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.27.1.4
rcIgmpStreamPort Port where the multicast stream was received.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.27.1.5
rcIgmpStreamState Indicates the state of the multicast stream dropped - Received stream is dropped. No request for this traffic was received. learned - Received stream is learned and forwarded locally (same network). A join has been rece…	Enumeration Enumerated Values: 1 dropped 2 learned 3 learnedRemoteSpb 4 learnedLocalAndRemoteSpb 5 routed 6 learnedAndRouted	.1.3.6.1.4.1.2272.1.30.27.1.6

This table obsoletes rcIgmpSenderTable

rcIgmpSendersEntry row .1.3.6.1.4.1.2272.1.30.28.1

Indexes

rcIgmpSendersIfIndex rcIgmpSendersGrpAddr rcIgmpSendersMemberAddr

Column	Syntax	OID
rcIgmpSendersIfIndex ifindex - Uniquely identifies entries in the table	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2272.1.30.28.1.1
rcIgmpSendersGrpAddr Ip multicast address of a group	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.28.1.2
rcIgmpSendersMemberAddr ip address of a host.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.30.28.1.3
rcIgmpSendersAction none(1), flushEntry(2), flushGrp(3). It describes the IGMP Sender action.	Enumerationr/w Enumerated Values: 1 none 2 flushEntry 3 flushGrp	.1.3.6.1.4.1.2272.1.30.28.1.4
rcIgmpSendersTPort Igmp Sender Tport.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.30.28.1.5
rcIgmpSendersState Indicates if a sender exists because of an IGMP access filter or not.	Enumeration Enumerated Values: 1 filtered 2 notfiltered	.1.3.6.1.4.1.2272.1.30.28.1.6
rcIgmpSendersL2Isid L2 ISID of the cvlan	Integer32 Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.30.28.1.7