RAISECOM-OPTICAL-TRANSCEIVER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
70

raisecomOpticalTransceiverInfoTable

table
.1.3.6.1.4.1.8886.1.18.2.1.1 · 1 row entry · 34 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomOpticalTransceiverInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-OPTICAL-TRANSCEIVER-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverInfoTable' 
Trancetver information Table.
raisecomOpticalTransceiverInfoEntry row .1.3.6.1.4.1.8886.1.18.2.1.1.1
An entry in the raisecomOpticalTransceiverInfoTable.
Indexes
Column Syntax OID
raisecomOpticalTransceiverType
TThis object specifies the physical type of the transceiver,
such as xfp or sfp , and so on.

this object belongs to xfp and sfp.
Enumeration
Enumerated Values:
1unknown
2gbic
3soldered
4sfp
5xbi
6xenpak
7xfp
8xff
9xfp-e
10xpak
11x2
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.1
raisecomOpticalTransceiverConnectorType
This object specifies the connector type of the transceiver??
unknown, sc, db9, hssdc, bnc_tnc, fiber_coaxial_head, fiber_outlet,
lc, mt_rj, mu, sg, fiber_pigtail, mpo_parallel_optic , hssdcII,
copper, rj45.
…
Enumeration
Enumerated Values:
1unknown
2sc
3db9
4hssdc
5bnc-tnc
6fiber-coaxial-head
7fiber-jack
8lc
9mt-rj
10mu
11sg
12fiber-pigtail
13mpo-parallel-optic
14hssdcII
15copper
16rj45
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.2
raisecomOpticalTransceiverVendorName
Vendor name of the interface.

this object belongs to xfp and sfp.
OctetString .1.3.6.1.4.1.8886.1.18.2.1.1.1.3
raisecomOpticalTransceiverVendorPN
Vendor part number of the interface.

this object belongs to xfp and sfp.
OctetString .1.3.6.1.4.1.8886.1.18.2.1.1.1.4
raisecomOpticalTransceiverVendorSN
Vendor serial number of the interface.

this object belongs to xfp and sfp.
OctetString .1.3.6.1.4.1.8886.1.18.2.1.1.1.5
raisecomOpticalTransceiverMediaType
Types of the fiber,
single_mode, multi_modeE50, multi_mode50,multi_mode625,copper.
single_modeKm,multi_modeOM3

this object belongs to xfp and sfp.
Enumeration
Enumerated Values:
1single-mode
2multi-modeE50
3multi-mode50
4multi-mode625
5copper
6single-modeKm
7multi-modeOM3
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.6
raisecomOpticalTransceiverTransmissionDistance
The max distance which the interface could transmit,
measured in meter.
The object will be shown in unit of Km, and the precision is 0.001.

this object belongs to xfp and sfp.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.7
raisecomOpticalTransceiverAbility
This object specifies the ability of optical module digitaldiagnotic
funtion. Currently, the digitaldiagnotic objects of our optical module
inculde 16 parameters.

this object has 32 bits, each bit rep…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.8
raisecomOpticalTransceiverDDM
This object specifies if the transceiver supports on digital diagnostic function,
support or not support.To the xfp, the default value of this object is support.

this object belongs to xfp and sfp.
Enumeration
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.9
raisecomOpticalTransceiverCalibrationType
This object specifies the calibration type of the transceiver,
internal, external, unknown.

this object belongs to xfp and sfp.
Enumeration
Enumerated Values:
1unknown
2internal
3external
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.10
raisecomOpticalTransceiverRSSI
This object specifies the calibration type of the transceiver,
support or not support.

this object belongs to xfp and sfp.
Enumeration
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.11
raisecomOpticalTransceiverVendorRev
the version number of the transceiver.
this object belongs to xfp and sfp.
OctetString .1.3.6.1.4.1.8886.1.18.2.1.1.1.12
raisecomOpticalTransceiverBRMax
the min data rate of the transceiver,mesured in Mbps .
this object belongs to xfp and sfp.

The object will be shown in unit of Gbps, and the precision is 0.1.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.13
raisecomOpticalTransceiverBRMin
the min data rate of the transceiver,mesured in Mbps.

this object belongs to xfp and sfp.To the sfp,
the min data rate value is equal to the max data rate value.

The object will be shown …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.14
raisecomOpticalTransceiverWavelengthContrl
if the transceiver supports on wavelength control
support,notsupport.
this object belongs to xfp.
Enumeration
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.15
raisecomOpticalTransceiverWavelength
Wavelength of the interface, measured in pm(0.001nm).
this object belongs to xfp.
The object will be shown in unit of nm, and the precision is 0.01.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.16
raisecomOpticalTransceiverWaveTolerance
the range of laser wavelength from nominal wavelength,mesured in pm(0.001*nm).
this object belongs to xfp.
The object will be shown in unit of nm, and the precision is 0.01.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.17
raisecomOpticalTransceiverCompatibility
the compatibility type that the transceiver supports,such as 10GBASE-SR.
this object belongs to xfp.
OctetString .1.3.6.1.4.1.8886.1.18.2.1.1.1.18
raisecomOpticalTransceiverPowerDissipation
the max power dissipation of the transceiver,
p1W5,p2W5,p3W5,exceed3W5.
this object belongs to xfp.
Enumeration
Enumerated Values:
1p1W5
2p2W5
3p3W5
4exceed
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.19
raisecomOpticalTransceiverCDR
the optical module supports on CDR fundtion.
support,notsupport.
this object belongs to xfp.
Enumeration
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.20
raisecomOpticalTransceiverRefClock
if the transceiver requires outside reference clock
required,notrequired.
this object belongs to xfp.
Enumeration
Enumerated Values:
1required
2notrequired
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.21
raisecomOpticalTransceiverTransmitterType
The transmitter type of the transceiver,such as 850 nm VCSEL.
this object belongs to xfp.
Enumeration
Enumerated Values:
1vcsel850nm
2vcsel1310nm
3vcsel1550nm
4fp1310nm
5dfb1310nm
6dfb1550nm
7eml1310nm
8eml1550nm
9copper-others
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.22
raisecomOpticalTransceiverCooled
The transmitter cooled type of the transceiver
cooled,uncooled.
this object belongs to xfp.
Enumeration
Enumerated Values:
1cooled
2uncooled
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.24
raisecomOpticalTransceiverTunalbe
The transmitter tunable type of the transceiver
tunable,untunable.
this object belongs to xfp.
Enumeration
Enumerated Values:
1tunable
2untunable
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.25
raisecomOpticalTransceiverDetectorType
The detector type of the transceiver
pin, apd.
this object belongs to xfp.
Enumeration
Enumerated Values:
1pin
2apd
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.26
raisecomOpticalTransceiverLineLoopBack
The transceiver support status of sideline loop-back control
support,notsupport.
this object belongs to xfp.
Enumeration
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.27
raisecomOpticalTransceiverXFILoopBack
The transceiver support status of XFI loop-back control
support,notsupport.
this object belongs to xfp.
Enumeration
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.28
raisecomOpticalTransceiverVps
This object specifies if the optical module supports on VPS
support,notsupport.
this object belongs to xfp.
Enumeration
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.29
raisecomOpticalTransceiverTxDis
The transceiver support status of software control the transmitter status
support,notsupport.
this object belongs to xfp.
Enumeration
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.30
raisecomOpticalTransceiverStandby
The transceiver support status of software control the standby mode.
support,notsupport.
this object belongs to xfp.
Enumeration
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.31
raisecomOpticalTransceiverInVpsLowPower
The VPS in low power support status of the transceiver
support,notsupport.
this object belongs to xfp.
Enumeration
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.32
raisecomOpticalTransceiverOutVpsLowPower
The VPS out low power support status of the transceiver
support,notsupport.
this object belongs to xfp.
Enumeration
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.33
raisecomOpticalTransceiverFEC
The FEC support status of transceiver
support,notsupport.
this object belongs to xfp.
Enumeration
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.34
raisecomOpticalTransceiverCMU
The CMU support status of transceiver
support,notsupport.
this object belongs to xfp.
Enumeration
Enumerated Values:
1support
2notsupport
 .1.3.6.1.4.1.8886.1.18.2.1.1.1.35

raisecomOpticalTransceiverDDMTable

table
.1.3.6.1.4.1.8886.1.18.2.2.1 · 1 row entry · 12 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomOpticalTransceiverDDMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-OPTICAL-TRANSCEIVER-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverDDMTable' 
This table provides objects to monitor optical
parameters in a network element.
raisecomOpticalTransceiverDDMEntry row .1.3.6.1.4.1.8886.1.18.2.2.1.1
An entry in the raisecomOpticalTransceiverMonTable provides objects to
monitor an optical parameter at an optical interface.
Indexes
Column Syntax OID
raisecomOpticalTransceiverParameterType
This object specifies the optical parameter that is being
monitored in this entry.
This object belongs to xfp/sfp.
OpticalParameterType
Type Values:
1transceiverTemperature
2txbiasCurrent
3txPower
4rxPower
5laserTemperature
6p5V0supplyVoltage
7p3V3supplyVoltage
8p1V8supplyVoltage
9n5V2supplyVoltage
10apdBiasVoltage
11p5V0supplyCurrent
12p3V3supplyCurrent
13p1V8supplyCurrent
14n5V2supplyCurrent
15tecCurrent
16laserWavelength
Description:
This value indicates the optical parameter that is
being monitored. Valid values are -OpticalParameterType

transceiverTemperature(1) :transceiver temperature
txbiasCurrent(2) :TX bias current
t…
 .1.3.6.1.4.1.8886.1.18.2.2.1.1.1
raisecomOpticalTransceiverParameterValue
This object gives the value measured for the particular
optical parameter specified by the raisecomOpticalMonParameterType
object.
This object belongs to xfp/sfp.
OpticalParameterValue
Type Constraints:
range: -1000000
range: -40000..6553600
Description:
The value of the optical parameter that is being monitored.
The range of values varies depending on the type of optical parameter being monitored,
as identified by a corresponding object with syntax OpticalParameterTyp…
 .1.3.6.1.4.1.8886.1.18.2.2.1.1.2
raisecomOpticalTransceiverParamHighAlarmThresh
This object gives the high alarm threshold on the
optical parameter being monitored.

An alarm condition will be raised if the value given by
raisecomOpticalParameterValue goes from below the value of
thi…
OpticalParameterValue
Type Constraints:
range: -1000000
range: -40000..6553600
Description:
The value of the optical parameter that is being monitored.
The range of values varies depending on the type of optical parameter being monitored,
as identified by a corresponding object with syntax OpticalParameterTyp…
 .1.3.6.1.4.1.8886.1.18.2.2.1.1.3
raisecomOpticalTransceiverParamHighWarningThresh
This object is used to set a high warning threshold on
the optical parameter being monitored.

A threshold crossing condition will be indicated if the value
given by raisecomOpticalParameterValue goes from…
OpticalParameterValue
Type Constraints:
range: -1000000
range: -40000..6553600
Description:
The value of the optical parameter that is being monitored.
The range of values varies depending on the type of optical parameter being monitored,
as identified by a corresponding object with syntax OpticalParameterTyp…
 .1.3.6.1.4.1.8886.1.18.2.2.1.1.4
raisecomOpticalTransceiverParamLowAlarmThresh
This object is used to set a low alarm threshold on the
optical parameter being monitored.

An alarm condition will be raised if the value given by
raisecomOpticalParameterValue goes from above the value o…
OpticalParameterValue
Type Constraints:
range: -1000000
range: -40000..6553600
Description:
The value of the optical parameter that is being monitored.
The range of values varies depending on the type of optical parameter being monitored,
as identified by a corresponding object with syntax OpticalParameterTyp…
 .1.3.6.1.4.1.8886.1.18.2.2.1.1.5
raisecomOpticalTransceiverParamLowWarningThresh
This object is used to set a low warning threshold on
the optical parameter being monitored.

A threshold crossing condition will be indicated if the value
given by raisecomOpticalParameterValue goes from …
OpticalParameterValue
Type Constraints:
range: -1000000
range: -40000..6553600
Description:
The value of the optical parameter that is being monitored.
The range of values varies depending on the type of optical parameter being monitored,
as identified by a corresponding object with syntax OpticalParameterTyp…
 .1.3.6.1.4.1.8886.1.18.2.2.1.1.6
raisecomOpticalTransceiverParamAlarmStatus
This object is used to indicate the current status of
the thresholds for the monitored optical parameter
on the interface.

If a threshold is currently being exceeded on the
interface, the object …
Enumeration
Enumerated Values:
1normal
2high-alarm
3high-warning
4low-alarm
5low-warning
 .1.3.6.1.4.1.8886.1.18.2.2.1.1.7
raisecomOpticalTransceiverParamAlarmLastValue
This object indicates the optical parameter value at the last time
a threshold related to a particular optical parameter was
exceeded on the interface.
If no threshold value is currently being
exceeded, then the value '…
OpticalParameterValue
Type Constraints:
range: -1000000
range: -40000..6553600
Description:
The value of the optical parameter that is being monitored.
The range of values varies depending on the type of optical parameter being monitored,
as identified by a corresponding object with syntax OpticalParameterTyp…
 .1.3.6.1.4.1.8886.1.18.2.2.1.1.8
raisecomOpticalTransceiverParamAlarmLastChange
This object specifies the value of sysUpTime at the last time
a threshold related to a particular optical parameter was
exceeded on the interface.

This object belongs to xfp/sfp.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8886.1.18.2.2.1.1.9
raisecomOpticalTransceiverDDM15MinValidIntervals
This object gives the number of previous 15 minute
intervals for which valid performance monitoring data
has been stored on the interface.

The value of this object will be n (where n is the maximum
number…
Unsigned32
Constraints:
range: 0-96
 .1.3.6.1.4.1.8886.1.18.2.2.1.1.10
raisecomOpticalTransceiverDDM24HrValidIntervals
This object gives the number of previous 24 hour intervals
for which valid performance monitoring data has been stored
on the interface. The max value of this object is 7, it
means that the user can look up 7days his…
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.8886.1.18.2.2.1.1.11
raisecomOpticalTransceiverDDMValidStatus
This object indicates the parameter row is valid or invalid.
The object value is 'valide' when the module is present and
supporting digitaldiagnotic. The object value is 'invalid'
when the module is absent, or when th…
Enumeration
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.8886.1.18.2.2.1.1.12

raisecomOpticalTransceiverPMCurrentTable

table
.1.3.6.1.4.1.8886.1.18.2.3.1 · 1 row entry · 5 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomOpticalTransceiverPMCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-OPTICAL-TRANSCEIVER-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverPMCurrentTable' 
This table contains performance monitoring data for the
various optical parameters, collected over the current 15
minute or the current 24 hour interval.
raisecomOpticalTransceiverPMCurrentEntry row .1.3.6.1.4.1.8886.1.18.2.3.1.1
An entry in the raisecomOpticalTransceiverPMCurrentTable. It contains
performance monitoring data for a monitored optical
parameter at an interface, collected over the current 15
minute or the current 24 hour interval.
Indexes
Column Syntax OID
raisecomOpticalTransceiverPMCurrentPeriod
This object indicates whether the optical parameter values
given in this entry are collected over the current 15 minute or
the current 24 hour interval.
This object belongs to xfp/sfp.
OpticalPMPeriod
Type Values:
1fifteenMin
2twentyFourHour
Description:
This value indicates the time period over which performance
monitoring data has been collected.
 .1.3.6.1.4.1.8886.1.18.2.3.1.1.1
raisecomOpticalTransceiverPMCurrentParamType
This object specifies the optical parameter that is being
monitored, in this entry.
This object belongs to xfp/sfp.
OpticalParameterType
Type Values:
1transceiverTemperature
2txbiasCurrent
3txPower
4rxPower
5laserTemperature
6p5V0supplyVoltage
7p3V3supplyVoltage
8p1V8supplyVoltage
9n5V2supplyVoltage
10apdBiasVoltage
11p5V0supplyCurrent
12p3V3supplyCurrent
13p1V8supplyCurrent
14n5V2supplyCurrent
15tecCurrent
16laserWavelength
Description:
This value indicates the optical parameter that is
being monitored. Valid values are -OpticalParameterType

transceiverTemperature(1) :transceiver temperature
txbiasCurrent(2) :TX bias current
t…
 .1.3.6.1.4.1.8886.1.18.2.3.1.1.2
raisecomOpticalTransceiverPMCurrentMaxParam
This object gives the maximum value measured for the monitored
optical parameter, in the current 15 minute or the current
24 hour interval.
This object belongs to xfp/sfp.
OpticalParameterValue
Type Constraints:
range: -1000000
range: -40000..6553600
Description:
The value of the optical parameter that is being monitored.
The range of values varies depending on the type of optical parameter being monitored,
as identified by a corresponding object with syntax OpticalParameterTyp…
 .1.3.6.1.4.1.8886.1.18.2.3.1.1.3
raisecomOpticalTransceiverPMCurrentMinParam
This object gives the minimum value measured for the monitored
optical parameter, in the current 15 minute or the current
24 hour interval.
This object belongs to xfp/sfp.
OpticalParameterValue
Type Constraints:
range: -1000000
range: -40000..6553600
Description:
The value of the optical parameter that is being monitored.
The range of values varies depending on the type of optical parameter being monitored,
as identified by a corresponding object with syntax OpticalParameterTyp…
 .1.3.6.1.4.1.8886.1.18.2.3.1.1.4
raisecomOpticalTransceiverPMCurrentMeanParam
This object gives the average value of the monitored
optical parameter, in the current 15 minute or the current
24 hour interval.
This object belongs to xfp/sfp.
OpticalParameterValue
Type Constraints:
range: -1000000
range: -40000..6553600
Description:
The value of the optical parameter that is being monitored.
The range of values varies depending on the type of optical parameter being monitored,
as identified by a corresponding object with syntax OpticalParameterTyp…
 .1.3.6.1.4.1.8886.1.18.2.3.1.1.5

raisecomOpticalTransceiverPMIntervalTable

table
.1.3.6.1.4.1.8886.1.18.2.3.2 · 1 row entry · 6 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomOpticalTransceiverPMIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-OPTICAL-TRANSCEIVER-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverPMIntervalTable' 
This table stores performance monitoring data for the
various optical parameters, collected over previous
intervals.
          
This table can have entries for one complete 24 hour
interval and up to 96 complete 15 minute
intervals. A system is required to store at least
4 completed 15 minute intervals. The number of valid
15 minute intervals in this table is indicated by the
raisecomOpticalTransceiverDDM15MinValidIntervals object 
and the number of valid 24 hour intervals is indicated by the
raisecomOpticalTransceiverDDM24HrValidIntervals object.
          
when the optical module is removed from the device, the relative 
history records will be cleaned.
raisecomOpticalTransceiverPMIntervalEntry row .1.3.6.1.4.1.8886.1.18.2.3.2.1
An entry in the raisecomOpticalTransceiverPMIntervalTable. It contains
performance monitoring data for an optical parameter,
collected over a previous interval.
Indexes
Column Syntax OID
raisecomOpticalTransceiverPMIntervalPeriod
This object indicates whether the optical parameter values,
given in this entry, are collected over a period of 15 minutes
or 24 hours.
This object belongs to xfp/sfp.
OpticalPMPeriod
Type Values:
1fifteenMin
2twentyFourHour
Description:
This value indicates the time period over which performance
monitoring data has been collected.
 .1.3.6.1.4.1.8886.1.18.2.3.2.1.1
raisecomOpticalTransceiverPMIntervalNumber
A number between 1 and 96, which identifies the
interval for which the set of optical parameter values is
available. The interval identified by 1 is the most recently
completed 15 minute or 24 hour interval, and the int…
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.8886.1.18.2.3.2.1.2
raisecomOpticalTransceiverPMIntervalParamType
This object specifies the optical parameter that is being
monitored, in this entry.
This object belongs to xfp/sfp.
OpticalParameterType
Type Values:
1transceiverTemperature
2txbiasCurrent
3txPower
4rxPower
5laserTemperature
6p5V0supplyVoltage
7p3V3supplyVoltage
8p1V8supplyVoltage
9n5V2supplyVoltage
10apdBiasVoltage
11p5V0supplyCurrent
12p3V3supplyCurrent
13p1V8supplyCurrent
14n5V2supplyCurrent
15tecCurrent
16laserWavelength
Description:
This value indicates the optical parameter that is
being monitored. Valid values are -OpticalParameterType

transceiverTemperature(1) :transceiver temperature
txbiasCurrent(2) :TX bias current
t…
 .1.3.6.1.4.1.8886.1.18.2.3.2.1.3
raisecomOpticalTransceiverPMIntervalMaxParam
This object gives the maximum value measured for the optical
parameter, in a particular 15 minute or 24 hour interval.
This object belongs to xfp/sfp.
OpticalParameterValue
Type Constraints:
range: -1000000
range: -40000..6553600
Description:
The value of the optical parameter that is being monitored.
The range of values varies depending on the type of optical parameter being monitored,
as identified by a corresponding object with syntax OpticalParameterTyp…
 .1.3.6.1.4.1.8886.1.18.2.3.2.1.4
raisecomOpticalTransceiverPMIntervalMinParam
This object gives the minimum value measured for the optical
parameter, in a particular 15 minute or 24 hour interval.
This object belongs to xfp/sfp.
OpticalParameterValue
Type Constraints:
range: -1000000
range: -40000..6553600
Description:
The value of the optical parameter that is being monitored.
The range of values varies depending on the type of optical parameter being monitored,
as identified by a corresponding object with syntax OpticalParameterTyp…
 .1.3.6.1.4.1.8886.1.18.2.3.2.1.5
raisecomOpticalTransceiverPMIntervalMeanParam
This object gives the average value of the measured optical
parameter, in a particular 15 minute or 24 hour interval.
This object belongs to xfp/sfp.
OpticalParameterValue
Type Constraints:
range: -1000000
range: -40000..6553600
Description:
The value of the optical parameter that is being monitored.
The range of values varies depending on the type of optical parameter being monitored,
as identified by a corresponding object with syntax OpticalParameterTyp…
 .1.3.6.1.4.1.8886.1.18.2.3.2.1.6

raisecomOpticalTransceiverCurrentStatusTable

table
.1.3.6.1.4.1.8886.1.18.2.4.1 · 1 row entry · 13 columns
Open in standard view
Uses the raisecom variant from /opt/observium/mibs/raisecom.
Command help
Walk raisecomOpticalTransceiverCurrentStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-OPTICAL-TRANSCEIVER-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiverCurrentStatusTable' 
This table stores the hard ware information and the information
set by user of the transceiver. 
This object belongs to xfp/sfp.
raisecomOpticalTransceiverCurrentStatusEntry row .1.3.6.1.4.1.8886.1.18.2.4.1.1
An entry in the raisecomOpticalTransceiverCurrentStatusTable. It contains
performance monitoring data for an optical parameter,
collected over a previous interval.
This object belongs to xfp/sfp.
Indexes
Column Syntax OID
raisecomOpticalTransceiverHwInfoAbsStatus
This object specifies if the optical module is absent
present,absent.
This object belongs to xfp and sfp.
Enumeration
Enumerated Values:
1absent
2present
 .1.3.6.1.4.1.8886.1.18.2.4.1.1.1
raisecomOpticalTransceiverHwInfoNRStatus
This object specifies if the optical module is ready for operation.
ready,notready.
This object belongs to xfp.
Enumeration
Enumerated Values:
1ready
2notready
 .1.3.6.1.4.1.8886.1.18.2.4.1.1.2
raisecomOpticalTransceiverHwInfoRxLosStatus
This object specifies if the optical module operation losses the receiving signal
normal,loss.
This object belongs to xfp.
Enumeration
Enumerated Values:
1normal
2loss
 .1.3.6.1.4.1.8886.1.18.2.4.1.1.3
raisecomOpticalTransceiverHwInfoStandby
This object specifies if the optical module works under standby mode.
normal,standby.
This object belongs to xfp.
Enumerationr/w
Enumerated Values:
1normal
2standby
 .1.3.6.1.4.1.8886.1.18.2.4.1.1.4
raisecomOpticalTransceiverHwInfoLaser
This object specifies if the optical module laser is turned on
on,off.
This object belongs to xfp.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.8886.1.18.2.4.1.1.5
raisecomOpticalTransceiverWaveLengthError
This object specifies error between the actual wavelength
and the wavelength set by the user,measured in pm.
This object belongs to xfp.
The object will be shown in unit of nm, and the precision is 0.001.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8886.1.18.2.4.1.1.6
raisecomOpticalTransceiverUserWaveLength
This object specifies the wavelength value of the optical module set by user,measured in pm.
This object belongs to xfp.
The object will be shown in unit of nm, and the precision is 0.01.
Integer32r/w
Constraints:
range: 0-3276800
 .1.3.6.1.4.1.8886.1.18.2.4.1.1.7
raisecomOpticalTransceiverUserDataRate
This object specifies the data rate of the optical module set by user,measured in Mbps.
This object belongs to xfp.
The object will be shown in unit of Gbps, and the precision is 0.1.
Integer32r/w
Constraints:
range: 9500-12500
 .1.3.6.1.4.1.8886.1.18.2.4.1.1.8
raisecomOpticalTransceiverUserLineLoopBack
This object specifies if the sideline loop-back is tuned on ,
user can change the loop back mode through the object.
normal,lineLoopback.
This object belongs to xfp.
Enumerationr/w
Enumerated Values:
1normal
2lineLoopback
 .1.3.6.1.4.1.8886.1.18.2.4.1.1.9
raisecomOpticalTransceiverUserXFILoopBack
This object specifies if the XFI loop-back is tuned on
user can change the loop back mode through the object.
normal,xfiLoopback.
This object belongs to xfp.
Enumerationr/w
Enumerated Values:
1normal
2xfiLoopback
 .1.3.6.1.4.1.8886.1.18.2.4.1.1.10
raisecomOpticalTransceiverPortNotifyEnable
This object specifies the generation of a port notifications,
enable or disable.
This object belongs to xfp and sfp.
EnableVarr/w
Type Values:
1enable
2disable
Description:
enable or disable a function.
 .1.3.6.1.4.1.8886.1.18.2.4.1.1.11
raisecomOpticalTransceiverPortDDMEnable
This object specifies the status of digitaldiagnotic on a port,
enable or disable.
This object belongs to xfp and sfp.
EnableVarr/w
Type Values:
1enable
2disable
Description:
enable or disable a function.
 .1.3.6.1.4.1.8886.1.18.2.4.1.1.12
raisecomOpticalTransceiverPortCheckPwdEnable
This object specifies the status of password checking on a port,
enable or disable.
This object belongs to xfp.
EnableVarr/w
Type Values:
1enable
2disable
Description:
enable or disable a function.
 .1.3.6.1.4.1.8886.1.18.2.4.1.1.13