RAISECOM-OPTICAL-TRANSCEIVER-MIB

Monitored by Observium

        This MIB module defines objects to monitor optical
characteristics on the optical interfaces in a network element.

Observium actively monitors this MIB

Observium uses this MIB in discovery or polling workflows on applicable devices.

Sensors

Explore Observium network monitoring

Source file: RAISECOM-OPTICAL-TRANSCEIVER-MIB
Last revised: 19 May 2010, 00:00 UTC
Identity: raisecomOpticalTransceiver
Base OID: 1.3.6.1.4.1.8886.1.18

Imported Objects

IF-MIB	ifIndex
RAISECOM-BASE-MIB	raisecomAgent
RAISECOM-COMMON-MANAGEMENT-MIB	raisecomNotificationLocation
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC	TEXTUAL-CONVENTION (no object page) TimeTicks

Net-SNMP examples using the raisecom MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'RAISECOM-OPTICAL-TRANSCEIVER-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiver'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAISECOM-OPTICAL-TRANSCEIVER-MIB' -M '/opt/observium/mibs/raisecom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAISECOM-OPTICAL-TRANSCEIVER-MIB::raisecomOpticalTransceiver'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (92)

10 directly used by Observium

raisecomOpticalTransceiver		`.1.3.6.1.4.1.8886.1.18`
raisecomOpticalTransceiverGlobalEnable		`.1.3.6.1.4.1.8886.1.18.1`
raisecomOpticalTransceiverNotifyEnable r/w	EnableVar	`.1.3.6.1.4.1.8886.1.18.1.1`
raisecomOpticalTransceiverDDMEnable OBS ✓ r/w	EnableVar	`.1.3.6.1.4.1.8886.1.18.1.2`
raisecomOpticalTransceiverCheckPwdEnable r/w	EnableVar	`.1.3.6.1.4.1.8886.1.18.1.3`
raisecomOpticalTransceiverObjects		`.1.3.6.1.4.1.8886.1.18.2`
raisecomOpticalTransceiverInfoGroup		`.1.3.6.1.4.1.8886.1.18.2.1`
raisecomOpticalTransceiverInfoTable		`.1.3.6.1.4.1.8886.1.18.2.1.1`
raisecomOpticalTransceiverInfoEntry	IF-MIBifIndex	`.1.3.6.1.4.1.8886.1.18.2.1.1.1`
raisecomOpticalTransceiverType	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.1`
raisecomOpticalTransceiverCalibrationType	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.10`
raisecomOpticalTransceiverRSSI	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.11`
raisecomOpticalTransceiverVendorRev	OctetString	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.12`
raisecomOpticalTransceiverBRMax	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.13`
raisecomOpticalTransceiverBRMin	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.14`
raisecomOpticalTransceiverWavelengthContrl	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.15`
raisecomOpticalTransceiverWavelength	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.16`
raisecomOpticalTransceiverWaveTolerance	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.17`
raisecomOpticalTransceiverCompatibility	OctetString	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.18`
raisecomOpticalTransceiverPowerDissipation	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.19`
raisecomOpticalTransceiverConnectorType	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.2`
raisecomOpticalTransceiverCDR	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.20`
raisecomOpticalTransceiverRefClock	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.21`
raisecomOpticalTransceiverTransmitterType	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.22`
raisecomOpticalTransceiverCooled	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.24`
raisecomOpticalTransceiverTunalbe	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.25`
raisecomOpticalTransceiverDetectorType	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.26`
raisecomOpticalTransceiverLineLoopBack	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.27`
raisecomOpticalTransceiverXFILoopBack	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.28`
raisecomOpticalTransceiverVps	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.29`
raisecomOpticalTransceiverVendorName	OctetString	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.3`
raisecomOpticalTransceiverTxDis	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.30`
raisecomOpticalTransceiverStandby	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.31`
raisecomOpticalTransceiverInVpsLowPower	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.32`
raisecomOpticalTransceiverOutVpsLowPower	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.33`
raisecomOpticalTransceiverFEC	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.34`
raisecomOpticalTransceiverCMU	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.35`
raisecomOpticalTransceiverVendorPN	OctetString	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.4`
raisecomOpticalTransceiverVendorSN	OctetString	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.5`
raisecomOpticalTransceiverMediaType	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.6`
raisecomOpticalTransceiverTransmissionDistance	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.7`
raisecomOpticalTransceiverAbility	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.8`
raisecomOpticalTransceiverDDM OBS ✓	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.1.1.1.9`
raisecomOpticalTransceiverDDMGroup		`.1.3.6.1.4.1.8886.1.18.2.2`
raisecomOpticalTransceiverDDMTable		`.1.3.6.1.4.1.8886.1.18.2.2.1`
raisecomOpticalTransceiverDDMEntry	IF-MIBifIndexraisecomOpticalTransceiverParameterType	`.1.3.6.1.4.1.8886.1.18.2.2.1.1`
raisecomOpticalTransceiverParameterType	OpticalParameterType	`.1.3.6.1.4.1.8886.1.18.2.2.1.1.1`
raisecomOpticalTransceiverDDM15MinValidIntervals	Unsigned32	`.1.3.6.1.4.1.8886.1.18.2.2.1.1.10`
raisecomOpticalTransceiverDDM24HrValidIntervals	Unsigned32	`.1.3.6.1.4.1.8886.1.18.2.2.1.1.11`
raisecomOpticalTransceiverDDMValidStatus	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.2.1.1.12`
raisecomOpticalTransceiverParameterValue OBS ✓	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.18.2.2.1.1.2`
raisecomOpticalTransceiverParamHighAlarmThresh OBS ✓	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.18.2.2.1.1.3`
raisecomOpticalTransceiverParamHighWarningThresh OBS ✓	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.18.2.2.1.1.4`
raisecomOpticalTransceiverParamLowAlarmThresh OBS ✓	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.18.2.2.1.1.5`
raisecomOpticalTransceiverParamLowWarningThresh OBS ✓	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.18.2.2.1.1.6`
raisecomOpticalTransceiverParamAlarmStatus OBS ✓	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.2.1.1.7`
raisecomOpticalTransceiverParamAlarmLastValue	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.18.2.2.1.1.8`
raisecomOpticalTransceiverParamAlarmLastChange	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.8886.1.18.2.2.1.1.9`
raisecomOpticalTransceiverPMGroup		`.1.3.6.1.4.1.8886.1.18.2.3`
raisecomOpticalTransceiverPMCurrentTable		`.1.3.6.1.4.1.8886.1.18.2.3.1`
raisecomOpticalTransceiverPMCurrentEntry	IF-MIBifIndexraisecomOpticalTransceiverPMCurrentPeriodraisecomOpticalTransceiverPMCurrentParamType	`.1.3.6.1.4.1.8886.1.18.2.3.1.1`
raisecomOpticalTransceiverPMCurrentPeriod	OpticalPMPeriod	`.1.3.6.1.4.1.8886.1.18.2.3.1.1.1`
raisecomOpticalTransceiverPMCurrentParamType	OpticalParameterType	`.1.3.6.1.4.1.8886.1.18.2.3.1.1.2`
raisecomOpticalTransceiverPMCurrentMaxParam	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.18.2.3.1.1.3`
raisecomOpticalTransceiverPMCurrentMinParam	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.18.2.3.1.1.4`
raisecomOpticalTransceiverPMCurrentMeanParam	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.18.2.3.1.1.5`
raisecomOpticalTransceiverPMIntervalTable		`.1.3.6.1.4.1.8886.1.18.2.3.2`
raisecomOpticalTransceiverPMIntervalEntry	IF-MIBifIndexraisecomOpticalTransceiverPMIntervalPeriodraisecomOpticalTransceiverPMIntervalNumberraisecomOpticalTransceiverPMIntervalParamType	`.1.3.6.1.4.1.8886.1.18.2.3.2.1`
raisecomOpticalTransceiverPMIntervalPeriod	OpticalPMPeriod	`.1.3.6.1.4.1.8886.1.18.2.3.2.1.1`
raisecomOpticalTransceiverPMIntervalNumber	Integer32	`.1.3.6.1.4.1.8886.1.18.2.3.2.1.2`
raisecomOpticalTransceiverPMIntervalParamType	OpticalParameterType	`.1.3.6.1.4.1.8886.1.18.2.3.2.1.3`
raisecomOpticalTransceiverPMIntervalMaxParam	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.18.2.3.2.1.4`
raisecomOpticalTransceiverPMIntervalMinParam	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.18.2.3.2.1.5`
raisecomOpticalTransceiverPMIntervalMeanParam	OpticalParameterValue	`.1.3.6.1.4.1.8886.1.18.2.3.2.1.6`
raisecomOpticalTransceiverStatusGroup		`.1.3.6.1.4.1.8886.1.18.2.4`
raisecomOpticalTransceiverCurrentStatusTable		`.1.3.6.1.4.1.8886.1.18.2.4.1`
raisecomOpticalTransceiverCurrentStatusEntry	IF-MIBifIndex	`.1.3.6.1.4.1.8886.1.18.2.4.1.1`
raisecomOpticalTransceiverHwInfoAbsStatus OBS ✓	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.4.1.1.1`
raisecomOpticalTransceiverUserXFILoopBack r/w	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.4.1.1.10`
raisecomOpticalTransceiverPortNotifyEnable r/w	EnableVar	`.1.3.6.1.4.1.8886.1.18.2.4.1.1.11`
raisecomOpticalTransceiverPortDDMEnable OBS ✓ r/w	EnableVar	`.1.3.6.1.4.1.8886.1.18.2.4.1.1.12`
raisecomOpticalTransceiverPortCheckPwdEnable r/w	EnableVar	`.1.3.6.1.4.1.8886.1.18.2.4.1.1.13`
raisecomOpticalTransceiverHwInfoNRStatus	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.4.1.1.2`
raisecomOpticalTransceiverHwInfoRxLosStatus	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.4.1.1.3`
raisecomOpticalTransceiverHwInfoStandby r/w	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.4.1.1.4`
raisecomOpticalTransceiverHwInfoLaser r/w	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.4.1.1.5`
raisecomOpticalTransceiverWaveLengthError	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.8886.1.18.2.4.1.1.6`
raisecomOpticalTransceiverUserWaveLength r/w	Integer32	`.1.3.6.1.4.1.8886.1.18.2.4.1.1.7`
raisecomOpticalTransceiverUserDataRate r/w	Integer32	`.1.3.6.1.4.1.8886.1.18.2.4.1.1.8`
raisecomOpticalTransceiverUserLineLoopBack r/w	Enumeration	`.1.3.6.1.4.1.8886.1.18.2.4.1.1.9`
raisecomOpticalTransceiverNotifications		`.1.3.6.1.4.1.8886.1.18.3`
raisecomOpticalTransceiverParamNotifications		`.1.3.6.1.4.1.8886.1.18.4`

Dependencies (10) 6 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

RAISECOM-OPTICAL-TRANSCEIVER-MIBraisecomselected
- IF-MIBrfcdefault fallback1 symbol
  - IANAifType-MIBrfc1 symbol
    - SNMPv2-SMIrfc2 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - SNMPv2-CONFrfc3 symbols
    - SNMPv2-SMIrfcshared3 symbols
  - SNMPv2-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared3 symbols
    - SNMPv2-SMIrfcshared7 symbols
    - SNMPv2-TCrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared8 symbols
- RAISECOM-BASE-MIBraisecom1 symbol
  - RFC1155-SMIrfcdefault fallback1 symbol
- RAISECOM-COMMON-MANAGEMENT-MIBraisecom1 symbol
  - RAISECOM-BASE-MIBraisecomshared1 symbol
  - SNMPv2-SMIrfcdefault fallbackshared6 symbols
  - SNMPv2-TCrfcdefault fallbackshared4 symbols
  - SWITCH-TCraisecom2 symbols
    - SNMPv2-TCrfcdefault fallbackshared1 symbol
- SNMPv2-CONFrfcdefault fallbackshared3 symbols
- SNMPv2-SMIrfcdefault fallbackshared5 symbols
- SNMPv2-TCrfcdefault fallbackshared2 symbols

Dependency-first compile order

SNMPv2-SMIrfc
SNMPv2-TCrfc
IANAifType-MIBrfc
SNMPv2-CONFrfc
SNMPv2-MIBrfc
IF-MIBrfc
RFC1155-SMIrfc
RAISECOM-BASE-MIBraisecom
SWITCH-TCraisecom
RAISECOM-COMMON-MANAGEMENT-MIBraisecom
RAISECOM-OPTICAL-TRANSCEIVER-MIBraisecomselected

Type Definitions (4)

EnableVar	Enumeration	`enable(1)` `disable(2)` enable or disable a function.
OpticalPMPeriod	Enumeration	`fifteenMin(1)` `twentyFourHour(2)` This value indicates the time period over which performance monitoring data has been collected.
OpticalParameterType	Enumeration	`transceiverTemperature(1)` `txbiasCurrent(2)` `txPower(3)` `rxPower(4)` `laserTemperature(5)` `p5V0supplyVoltage(6)` `p3V3supplyVoltage(7)` `p1V8supplyVoltage(8)` `n5V2supplyVoltage(9)` `apdBiasVoltage(10)` `p5V0supplyCurrent(11)` `p3V3supplyCurrent(12)` `p1V8supplyCurrent(13)` `n5V2supplyCurrent(14)` `tecCurrent(15)` `laserWavelength(16)` This value indicates the optical parameter that is being monitored. Valid values are -OpticalParameterType transceiverTemperature(1) :transceiver temperature txbiasCurrent(2) :TX bias current txPower(3) :TX output power rxPower(4) :RX received optical power laserTemperature(5) :laser temperature p5V0supplyVoltage(6) :+5V supply voltage p3V3supplyVoltage(7) :+3.3V supply voltage p1V8supplyVoltage(8) :+1.8V supply voltage n5V2supplyVoltage(9) :-5.2V supply voltage apdBiasVoltage(10) :APD bias voltage p5V0supplyCurrent(11) :+5V supply currnet p3V3supplyCurrent(12) :+3.3V supply currnet p1V8supplyCurrent(13) :+1.8V supply currnet n5V2supplyCurrent(14) :-5.2V supply currnet tecCurrent(15) :TEC currnet laserWavelength(16) :laser wavelength
OpticalParameterValue	Integer32	`range: -1000000range: -40000..6553600` The value of the optical parameter that is being monitored. The range of values varies depending on the type of optical parameter being monitored, as identified by a corresponding object with syntax OpticalParameterType. When the optical parameter being monitored is 'XXTemperature',the supported range is from -40000 to 125000, in units of 1/1000 degrees centigrade. Example: A value of 23500 represents a temperature reading of 23.5 degrees C. The temperature is shown in unit of degrees centigrade, and the precision is 0.1. When the optical parameter being monitored is 'txbiasCurrent',the supported range is from 0 to 131000, in units of 1/1000 mA. Example: A value of 1000 represents a TX bias current reading of 1.0mA. The 'txbiasCurrent'is shown in unit of mA, and the precision is 0.1. When the optical parameter being monitored is 'txPower',the supported range is from -40000 to 8200, in units of 1/1000 dbm. Example: A value of 77800 represents a TX output power reading of 7.78 dBm. The 'txPower' is shown in unit of dBm, and the precision is 0.1. When the optical parameter being monitored is 'rxPower',the supported range is from -40000 to 8200, in units of 1/1000 dbm. Example: A value of 7780 represents a RX received optical power reading of 7.78 dBm. The 'rxPower' is shown in unit of dBm, and the precision is 0.1. When the optical parameter being monitored is 'XXsupplyVoltage',the supported range is from 0 to 6550, in units of 1/1000 V. Example: A value of 6000 represents a XX supply Voltage eading of 6.00V. The 'XXsupplyVoltage'is shown in unit of V, and the precision is 0.01. When the optical parameter being monitored is 'apdBiasVoltage,the supported range is from 0 to 655300 , in units of 1/1000 V . Example: A value of 600000 represents a APD BiasVoltage reading of 600.0V. The 'apdBiasVoltage' is shown in unit of V, and the precision is 0.1. When the optical parameter being monitored is 'XXsupplyCurrent',the supported range is from 0 to 6553600, in units of 1/1000 mA . Example: A value of 6000000 represents a XX supply current reading of 6000.0mA. The 'XXsupplyCurrent' is shown in unit of mA, and the precision is 0.1. When the optical parameter being monitored is 'tecCurrent',the supported range is from 0 to 6553600, in units of 1/1000 mA . Example: A value of 6000000 represents a TEC Current reading of 6000.0mA. The 'tecCurrent' is shown in unit of mA, and the precision is 0.1. When the optical parameter being monitored is 'laserWavelength,the supported range is from 0 to 3276750, in units of 1/1000 nm . Example: A value of 3000000 represents a laser wavelength reading of 3000.0nm. The 'laserWavelength'is shown in unit of nm, and the precision is 0.01.

Notifications / Traps (80)

Name	OID	Description
raisecomOpticalTransceiverAbsentTrap raisecomOpticalTransceiverHwInfoAbsStatus	`.1.3.6.1.4.1.8886.1.18.3.1`	This notification is sent when the optical module is removed from the device. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverParamAlarmNormalTrap raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.3.10`	This notification is sent when the optical module parameter value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverParamWarningTrap raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.3.11`	This notification is sent when the optical module parameter value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverParamWarningNormalTrap raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.3.12`	This notification is sent when the optical module parameter value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverLaserBackLightAlarmTrap raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.3.13`	This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverLaserBackLightAlarmNormalTrap raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.3.14`	This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverLaserLifeAlarmTrap raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.3.15`	This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverLaserLifeAlarmNormalTrap raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.3.16`	This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverPresentTrap raisecomOpticalTransceiverHwInfoAbsStatus	`.1.3.6.1.4.1.8886.1.18.3.2`	This notification is sent when the optical module is plugged into the device. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverNRAlarmTrap raisecomOpticalTransceiverHwInfoNRStatus	`.1.3.6.1.4.1.8886.1.18.3.3`	This notification is sent when the transmitted or received data of optical module is invalid. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverNRNormalTrap raisecomOpticalTransceiverHwInfoNRStatus	`.1.3.6.1.4.1.8886.1.18.3.4`	This notification is sent when the transmitted or received data of optical module is valid. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverRxLosAlarmTrap raisecomOpticalTransceiverHwInfoRxLosStatus	`.1.3.6.1.4.1.8886.1.18.3.5`	This notification is sent when the optical module receiving signal is lost. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverRxLosNormaTrap raisecomOpticalTransceiverHwInfoRxLosStatus	`.1.3.6.1.4.1.8886.1.18.3.6`	This notification is sent when the optical module receiving signal is back to normal. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverCheckPwdFailureTrap	`.1.3.6.1.4.1.8886.1.18.3.7`	This notification is sent when the optical module password checking is failed. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverCheckPwdSucceedTrap	`.1.3.6.1.4.1.8886.1.18.3.8`	This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverParamAlarmTrap raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.3.9`	This notification is sent when the optical module parameter value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTemperatureAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.1`	This notification is sent when the optical module Temperature value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTxPowerAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.10`	This notification is sent when the optical module Tx Power value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTxPowerWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.11`	This notification is sent when the optical module Tx Power value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTxPowerWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.12`	This notification is sent when the optical module Tx Power value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverRxPowerAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.13`	This notification is sent when the optical module Rx Power value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverRxPowerWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.14`	This notification is sent when the optical module Rx Power value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverRxPowerWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.15`	This notification is sent when the optical module Rx Power value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverRxPowerAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.16`	This notification is sent when the optical module Rx Power value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverLaserTemperatureAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.17`	This notification is sent when the optical module Laser Temperature value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverLaserTemperatureWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.18`	This notification is sent when the optical module Laser Temperature value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverLaserTemperatureWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.19`	This notification is sent when the optical module Laser Temperature value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTemperatureAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.2`	This notification is sent when the optical module Temperature value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverLaserTemperatureAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.20`	This notification is sent when the optical module Laser Temperature value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP5V0supplyVoltageAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.21`	This notification is sent when the optical module +5.0V supply Voltage value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP5V0supplyVoltageWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.22`	This notification is sent when the optical module +5.0V supply Voltage value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP5V0supplyVoltageWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.23`	This notification is sent when the optical module +5.0V supply Voltage value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP5V0supplyVoltageAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.24`	This notification is sent when the optical module +5.0V supply Voltage value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP3V3supplyVoltageAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.25`	This notification is sent when the optical module +3.3V supply Voltage value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP3V3supplyVoltageWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.26`	This notification is sent when the optical module +3.3V supply Voltage value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP3V3supplyVoltageWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.27`	This notification is sent when the optical module +3.3V supply Voltage value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP3V3supplyVoltageAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.28`	This notification is sent when the optical module +3.3V supply Voltage value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP1V8supplyVoltageAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.29`	This notification is sent when the optical module +1.8v supply Voltage value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTemperatureWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.3`	This notification is sent when the optical module Temperature value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP1V8supplyVoltageWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.30`	This notification is sent when the optical module +1.8v supply Voltage value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP1V8supplyVoltageWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.31`	This notification is sent when the optical module +1.8v supply Voltage value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP1V8supplyVoltageAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.32`	This notification is sent when the optical module +1.8v supply Voltage value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverN5V2supplyVoltageAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.33`	This notification is sent when the optical module -5.2v supply Voltage value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverN5V2supplyVoltageWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.34`	This notification is sent when the optical module -5.2v supply Voltage value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverN5V2supplyVoltageWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.35`	This notification is sent when the optical module -5.2v supply Voltage value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverN5V2supplyVoltageAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.36`	This notification is sent when the optical module -5.2v supply Voltage value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverApdBiasVoltageAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.37`	This notification is sent when the optical module APD Bias Voltage value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverApdBiasVoltageWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.38`	This notification is sent when the optical module APD Bias Voltage value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverApdBiasVoltageWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.39`	This notification is sent when the optical module APD Bias Voltage value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTemperatureWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.4`	This notification is sent when the optical module Temperature value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverApdBiasVoltageAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.40`	This notification is sent when the optical module APD Bias Voltage value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP5V0supplyCurrentAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.41`	This notification is sent when the optical module +5.0V supply Current value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP5V0supplyCurrentWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.42`	This notification is sent when the optical module +5.0V supply Current value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP5V0supplyCurrentWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.43`	This notification is sent when the optical module +5.0V supply Current value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP5V0supplyCurrentAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.44`	This notification is sent when the optical module +5.0V supply Current value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP3V3supplyCurrentAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.45`	This notification is sent when the optical module +3.3V supply Current value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP3V3supplyCurrentWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.46`	This notification is sent when the optical module +3.3V supply Current value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP3V3supplyCurrentWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.47`	This notification is sent when the optical module +3.3V supply Current value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP3V3supplyCurrentAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.48`	This notification is sent when the optical module +3.3V supply Current value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP1V8supplyCurrentAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.49`	This notification is sent when the optical module +1.8V supply Current value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTxbiasCurrentAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.5`	This notification is sent when the optical module Tx bias Current value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP1V8supplyCurrentWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.50`	This notification is sent when the optical module +1.8V supply Current value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP1V8supplyCurrentWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.51`	This notification is sent when the optical module +1.8V supply Current value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverP1V8supplyCurrentAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.52`	This notification is sent when the optical module +1.8V supply Current value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverN5V2supplyCurrentAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.53`	This notification is sent when the optical module -5.2V supply Current value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverN5V2supplyCurrentWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.54`	This notification is sent when the optical module -5.2V supply Current value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverN5V2supplyCurrentWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.55`	This notification is sent when the optical module -5.2V supply Current value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverN5V2supplyCurrentAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.56`	This notification is sent when the optical module -5.2V supply Current value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTecCurrentAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.57`	This notification is sent when the optical module TecCurrent value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTecCurrentWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.58`	This notification is sent when the optical module TecCurrent value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTecCurrentWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.59`	This notification is sent when the optical module TecCurrent value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTxbiasCurrentAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.6`	This notification is sent when the optical module Tx bias Current value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTecCurrentAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.60`	This notification is sent when the optical module TecCurrent value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverLaserWavelengthAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.61`	This notification is sent when the optical module laserWavelength value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverLaserWavelengthWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.62`	This notification is sent when the optical module laserWavelength value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverLaserWavelengthWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.63`	This notification is sent when the optical module laserWavelength value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverLaserWavelengthAlarmNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.64`	This notification is sent when the optical module laserWavelength value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTxbiasCurrentWarningTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.7`	This notification is sent when the optical module Tx bias Current value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTxbiasCurrentWarningNormalTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.8`	This notification is sent when the optical module Tx bias Current value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
raisecomOpticalTransceiverTxPowerAlarmTrap RAISECOM-COMMON-MANAGEMENT-MIBraisecomNotificationLocation raisecomOpticalTransceiverParameterValue raisecomOpticalTransceiverParamAlarmStatus	`.1.3.6.1.4.1.8886.1.18.4.9`	This notification is sent when the optical module Tx Power value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.