RADIO-BRIDGE-MH-TG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
44

rbTgRcLinksActiveTable

table
.1.3.6.1.4.1.31926.35.1.1.3.1 · 1 row entry · 34 columns
Open in standard view
Uses the siklu variant from /opt/observium/mibs/siklu.
Command help
Walk rbTgRcLinksActiveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RADIO-BRIDGE-MH-TG-MIB' -M '/opt/observium/mibs/siklu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADIO-BRIDGE-MH-TG-MIB::rbTgRcLinksActiveTable' 
A list of all connected RF links and their parameters (initiated and responded) indexed by ifIndex.
rbTgRcLinksActiveEntry row .1.3.6.1.4.1.31926.35.1.1.3.1.1
An entry containing management information applicable to a particular RF link.
Indexes
Column Syntax OID
rbTgRcLinksActiveIfIndex
The ifIndex value that identifies the RF link.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.1
rbTgRcLinksActiveRemoteName
The network Assigned Name/ID (AN) of the remote unit to which an RF link is defined.
RbTgRadioNodeAssignedName
Type Constraints:
range: 1..8
Description:
Multihaul TG Node ID/Assigned Name (AN). The name identifies the Multihaul TG node (DN or CN) across RF link.
The AN must be unique across the entire Multihaul TG network.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.2
rbTgRcLinksActiveActualRemoteSector
The remote sector index that the RF link is associated to (in the remote unit).
RbTgRadioSectorIndex
Based On: SNMPv2-SMIGauge32
Type Constraints:
range: 1..4
Description:
Index of a radio sector.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.3
rbTgRcLinksActiveActualLocalSector
The local sector index that the RF link is associated from.
RbTgRadioSectorIndex
Based On: SNMPv2-SMIGauge32
Type Constraints:
range: 1..4
Description:
Index of a radio sector.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.4
rbTgRcLinksActiveLocalRole
Describes whether the local unit initiated the RF link or responded to it.
RbTgRadioNodeLocalRole
Type Values:
1rnlrInitiator
2rnlrResponder
Description:
Whether the local node initiated the RF link or responded to the RF link request.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.5
rbTgRcLinksActiveLinkUptime
The value of sysUpTime at the time the RF link was changed state to UP.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.6
rbTgRcLinksActiveRssi
Received signal strength indicator. Range: -200dBm to 0dBm, resolution of 1dBm.
dBmInteger32
Constraints:
range: -200-0
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.7
rbTgRcLinksActiveSnr
Signal-to-Noise Ratio. Range: -50dB to +100dB, resolution of 0.1dB.
dBSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.8
rbTgRcLinksActiveMcsRx
Current Modulation Coding Scheme index of RX.
RbTgRadioMcs
Based On: SNMPv2-SMIGauge32
Type Constraints:
range: 0..12
Description:
Modulation Coding Scheme index (MCS).
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.9
rbTgRcLinksActiveMcsTx
Current Modulation Coding Scheme index of TX.
RbTgRadioMcs
Based On: SNMPv2-SMIGauge32
Type Constraints:
range: 0..12
Description:
Modulation Coding Scheme index (MCS).
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.10
rbTgRcLinksActiveRxPer
Current Packet Error Rate (PER) of RX, in percentage. 2 fraction-digits accuracy.
PercentageSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.11
rbTgRcLinksActiveTxPer
Current Packet Error Rate (PER) of TX, in percentage. 2 fraction-digits accuracy.
PercentageSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.12
rbTgRcLinksActiveTxPowerIndex
Current Transmit Power Index (relative).
RbTgRadioTxPowerIndex
Based On: SNMPv2-SMIGauge32
Type Constraints:
range: 6..31
Description:
Transmit power index (relative).
1. For MCS 9 and lower the limit is 31.
2. For MCS 10 and higher the index limit is 25.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.13
rbTgRcLinksActiveSpeedRx
Current over-the-air (OTA) rate of RX.
MbpsRbTgRadioRfLinkSpeed
Based On: SNMPv2-SMIGauge32
Type Constraints:
range: 0..3800
Description:
Over-the-air (OTA) rate.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.14
rbTgRcLinksActiveSpeedTx
Current over-the-air (OTA) rate of TX.
MbpsRbTgRadioRfLinkSpeed
Based On: SNMPv2-SMIGauge32
Type Constraints:
range: 0..3800
Description:
Over-the-air (OTA) rate.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.15
rbTgRcLinksActiveBeamIndexRx
Current index of active RX beam.
RbTgRadioBeamIndex
Based On: SNMPv2-SMIGauge32
Type Constraints:
range: 0..119
Description:
Tx/Rx beam index.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.16
rbTgRcLinksActiveBeamAzimuthRx
Current azimuth direction of active RX beam.
DegreesRbTgRadioBeamAngle
Type Constraints:
range: -180..180
Description:
Beam direction for azimuth or elevation.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.17
rbTgRcLinksActiveBeamElevationRx
Current elevation direction of active RX beam.
DegreesRbTgRadioBeamAngle
Type Constraints:
range: -180..180
Description:
Beam direction for azimuth or elevation.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.18
rbTgRcLinksActiveActiveTileCountRx
Current count of active RF tiles for RX beam.
RbTgRadioActiveTilesCount
Based On: SNMPv2-SMIGauge32
Type Constraints:
range: 1..8
Description:
Count of active RF tiles.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.19
rbTgRcLinksActiveBeamIndexTx
Current index of active TX beam.
RbTgRadioBeamIndex
Based On: SNMPv2-SMIGauge32
Type Constraints:
range: 0..119
Description:
Tx/Rx beam index.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.20
rbTgRcLinksActiveBeamAzimuthTx
Current azimuth direction of active TX beam.
DegreesRbTgRadioBeamAngle
Type Constraints:
range: -180..180
Description:
Beam direction for azimuth or elevation.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.21
rbTgRcLinksActiveBeamElevationTx
Current elevation direction of active TX beam.
DegreesRbTgRadioBeamAngle
Type Constraints:
range: -180..180
Description:
Beam direction for azimuth or elevation.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.22
rbTgRcLinksActiveActiveTileCountTx
Current count of active RF tiles for TX beam.
RbTgRadioActiveTilesCount
Based On: SNMPv2-SMIGauge32
Type Constraints:
range: 1..8
Description:
Count of active RF tiles.
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.23
rbTgRcLinksActiveCounterRxOk
Number of successfully received frames/MPDUs.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.24
rbTgRcLinksActiveCounterTxOk
Number of successfully transmitted frames/MPDUs.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.25
rbTgRcLinksActiveCounterRxFail
Number of CRC failed frames received (Once CRC fail, cannot trust RA as well).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.26
rbTgRcLinksActiveCounterTxFail
Number of transmission failures.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.27
rbTgRcLinksActiveCounterRxHcsFail
Number of received frames with HCS failed PLCP header.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.28
rbTgRcLinksActiveCounterTxFailures
Total number of TX packets dropped due to lifetime expiry.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.29
rbTgRcLinksActiveCounterRxFailures
Total number of RX packets failures.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.30
rbTgRcLinksActiveCounterRxDropBufSize
Total RX Discard count due to Buffer overflow.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.31
rbTgRcLinksActiveCounterRxDropEncryptionFail
Total RX Discard count due to Encryption failure.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.32
rbTgRcLinksActiveCounterRxDropRaMismatch
Total RX Discard count due to RA mismatch.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.33
rbTgRcLinksActiveCounterRxDropUnexpected
Total RX Discard count due to other unexpected reasons or PER emulator.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.31926.35.1.1.3.1.1.34

rbTgRdLinksConfiguredTable

table
.1.3.6.1.4.1.31926.35.1.2.3.1 · 1 row entry · 10 columns
Open in standard view
Uses the siklu variant from /opt/observium/mibs/siklu.
Command help
Walk rbTgRdLinksConfiguredTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RADIO-BRIDGE-MH-TG-MIB' -M '/opt/observium/mibs/siklu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADIO-BRIDGE-MH-TG-MIB::rbTgRdLinksConfiguredTable' 
A list of all RF links that the Data Node will try to initiate indexed by ifIndex.
rbTgRdLinksConfiguredEntry row .1.3.6.1.4.1.31926.35.1.2.3.1.1
An entry containing management information applicable to a particular RF link.
Indexes
Column Syntax OID
rbTgRdLinksConfiguredIfIndex
The ifIndex value that identifies the RF link.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.31926.35.1.2.3.1.1.1
rbTgRdLinksConfiguredRemoteName
The network Assigned Name/ID (AN) of the remote unit to which an RF link is defined.
RbTgRadioNodeAssignedName
Type Constraints:
range: 1..8
Description:
Multihaul TG Node ID/Assigned Name (AN). The name identifies the Multihaul TG node (DN or CN) across RF link.
The AN must be unique across the entire Multihaul TG network.
 .1.3.6.1.4.1.31926.35.1.2.3.1.1.2
rbTgRdLinksConfiguredResponderNodeType
The requested Node type of the remote Node. The RF link will be rejected if the
remote Node is already configured to a different type by another active RF link.
To avoid rejected, the rules are:
1. Any RF link to a base…
RbTgRadioDnResponderNodeType
Type Values:
1rdrntDn
2rdrntCn
Description:
Whether the TG unit is a distribution node (DN) or a client node (CN).
 .1.3.6.1.4.1.31926.35.1.2.3.1.1.3
rbTgRdLinksConfiguredControlSuperframe
Time slot at which the local node exchanges control information with the remote node.
If responder-node-type = Client Node (CN): must be set to unspecified.
If responder-node-type = Distribution Node (DN): can be either…
RbTgRadioDnControlSuperframe
Type Values:
0rdcs0
1rdcs1
10rdcsUnspecified
Description:
Time slot at which the local node exchanges control information with the remote node.
Only valid for DN to DN RF links. For DN to CN RF links must be set to unspecified.
 .1.3.6.1.4.1.31926.35.1.2.3.1.1.4
rbTgRdLinksConfiguredAdminStatus
Defines whether to initiate the link (and keep it up) or
drop it (in case it was already established).
RbTgAdminStatus
Type Values:
1asUp
2asDown
Description:
The desired state of the interface.
Can be either enabled/up or disabled/down.
 .1.3.6.1.4.1.31926.35.1.2.3.1.1.5
rbTgRdLinksConfiguredLocalSectorBitmap
A bit map representation of the local RF sectors list.
For example: local sector 1 and local sector 2 will result in 0x3.
RbTgRadioDnSectorBitmap
Based On: SNMPv2-SMIGauge32
Type Constraints:
range: 1..15
Description:
A bit map representation of the local or remote RF sectors list.
For example: sector 1 and 2 will be represented as 0x3.
 .1.3.6.1.4.1.31926.35.1.2.3.1.1.6
rbTgRdLinksConfiguredRemoteSectorBitmap
A bit map representation of the remote RF sectors list.
For example: remote sector 1 and remote sector 2 will result in 0x3.
RbTgRadioDnSectorBitmap
Based On: SNMPv2-SMIGauge32
Type Constraints:
range: 1..15
Description:
A bit map representation of the local or remote RF sectors list.
For example: sector 1 and 2 will be represented as 0x3.
 .1.3.6.1.4.1.31926.35.1.2.3.1.1.7
rbTgRdLinksConfiguredLinkState
Possible states of RF link ignition.
RbTgRadioDnLinkState
Type Values:
1rdlsConnected
2rdlsLinkAdminDown
3rdlsSectorAdminDown
4rdlsWaitingUpstreamConnection
5rdlsWaitingInQueue
6rdlsWaitingPolarityPeriod
7rdlsIgnition
Description:
Possible states of RF link ignition.
Possible options are:
1. The RF link is connected.
2. The RF link admin status is down.
3. The local sectors of the RF link are down.
4. Waiting for the incoming RF link.
5. Waiting …
 .1.3.6.1.4.1.31926.35.1.2.3.1.1.8
rbTgRdLinksConfiguredTxGolayIndex
Tx Golay index of Golay code sequence.
RbTgRadioGolayIndex
Type Values:
0rgiUnspecified
1rgiVal1
2rgiVal2
Description:
Index of the radio Golay code sequence.
Must be specified in TG node defaults and/or for each sector.
Could be overridden in RF link.
Based on TG radio definitions.
 .1.3.6.1.4.1.31926.35.1.2.3.1.1.9
rbTgRdLinksConfiguredRxGolayIndex
Rx Golay index of Golay code sequence.
RbTgRadioGolayIndex
Type Values:
0rgiUnspecified
1rgiVal1
2rgiVal2
Description:
Index of the radio Golay code sequence.
Must be specified in TG node defaults and/or for each sector.
Could be overridden in RF link.
Based on TG radio definitions.
 .1.3.6.1.4.1.31926.35.1.2.3.1.1.10