RADIO-BRIDGE-MH-TG-MIB

Recognized by Observium
        The MIB module for managing Siklu Multihaul TG products.
Copyright 2023 by Siklu Communication Ltd. All rights reserved.
    
Observium recognizes this MIB
Observium uses this MIB to identify device capabilities or determine applicability.
Explore Observium network monitoring
Source file
RADIO-BRIDGE-MH-TG-MIB
Last revised
Identity
rbTgMIB
Base OID
1.3.6.1.4.1.31926.35
Imported Objects
IF-MIB InterfaceIndex
RADIO-BRIDGE-MIB radioBridgeRoot
SNMPv2-CONF OBJECT-GROUP (no object page)
SNMPv2-SMI Counter64 Gauge32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks
SNMPv2-TC DisplayString TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the siklu MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'RADIO-BRIDGE-MH-TG-MIB' -M '/opt/observium/mibs/siklu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RADIO-BRIDGE-MH-TG-MIB::rbTgMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RADIO-BRIDGE-MH-TG-MIB' -M '/opt/observium/mibs/siklu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADIO-BRIDGE-MH-TG-MIB::rbTgMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (59)
.1.3.6.1.4.1.31926.35
.1.3.6.1.4.1.31926.35.1
.1.3.6.1.4.1.31926.35.1.1
.1.3.6.1.4.1.31926.35.1.1.1
.1.3.6.1.4.1.31926.35.1.1.2
.1.3.6.1.4.1.31926.35.1.1.3
.1.3.6.1.4.1.31926.35.1.1.3.1
.1.3.6.1.4.1.31926.35.1.1.3.1.1
.1.3.6.1.4.1.31926.35.1.1.3.1.1.1
.1.3.6.1.4.1.31926.35.1.1.3.1.1.10
.1.3.6.1.4.1.31926.35.1.1.3.1.1.11
.1.3.6.1.4.1.31926.35.1.1.3.1.1.12
.1.3.6.1.4.1.31926.35.1.1.3.1.1.13
.1.3.6.1.4.1.31926.35.1.1.3.1.1.14
.1.3.6.1.4.1.31926.35.1.1.3.1.1.15
.1.3.6.1.4.1.31926.35.1.1.3.1.1.16
.1.3.6.1.4.1.31926.35.1.1.3.1.1.17
.1.3.6.1.4.1.31926.35.1.1.3.1.1.18
.1.3.6.1.4.1.31926.35.1.1.3.1.1.19
.1.3.6.1.4.1.31926.35.1.1.3.1.1.2
.1.3.6.1.4.1.31926.35.1.1.3.1.1.20
.1.3.6.1.4.1.31926.35.1.1.3.1.1.21
.1.3.6.1.4.1.31926.35.1.1.3.1.1.22
.1.3.6.1.4.1.31926.35.1.1.3.1.1.23
.1.3.6.1.4.1.31926.35.1.1.3.1.1.24
.1.3.6.1.4.1.31926.35.1.1.3.1.1.25
.1.3.6.1.4.1.31926.35.1.1.3.1.1.26
.1.3.6.1.4.1.31926.35.1.1.3.1.1.27
.1.3.6.1.4.1.31926.35.1.1.3.1.1.28
.1.3.6.1.4.1.31926.35.1.1.3.1.1.29
.1.3.6.1.4.1.31926.35.1.1.3.1.1.3
.1.3.6.1.4.1.31926.35.1.1.3.1.1.30
.1.3.6.1.4.1.31926.35.1.1.3.1.1.31
.1.3.6.1.4.1.31926.35.1.1.3.1.1.32
.1.3.6.1.4.1.31926.35.1.1.3.1.1.33
.1.3.6.1.4.1.31926.35.1.1.3.1.1.34
.1.3.6.1.4.1.31926.35.1.1.3.1.1.4
.1.3.6.1.4.1.31926.35.1.1.3.1.1.5
.1.3.6.1.4.1.31926.35.1.1.3.1.1.6
dBmInteger32
.1.3.6.1.4.1.31926.35.1.1.3.1.1.7
.1.3.6.1.4.1.31926.35.1.1.3.1.1.8
.1.3.6.1.4.1.31926.35.1.1.3.1.1.9
.1.3.6.1.4.1.31926.35.1.2
.1.3.6.1.4.1.31926.35.1.2.1
.1.3.6.1.4.1.31926.35.1.2.2
.1.3.6.1.4.1.31926.35.1.2.3
.1.3.6.1.4.1.31926.35.1.2.3.1
.1.3.6.1.4.1.31926.35.1.2.3.1.1
.1.3.6.1.4.1.31926.35.1.2.3.1.1.1
.1.3.6.1.4.1.31926.35.1.2.3.1.1.10
.1.3.6.1.4.1.31926.35.1.2.3.1.1.2
.1.3.6.1.4.1.31926.35.1.2.3.1.1.3
.1.3.6.1.4.1.31926.35.1.2.3.1.1.4
.1.3.6.1.4.1.31926.35.1.2.3.1.1.5
.1.3.6.1.4.1.31926.35.1.2.3.1.1.6
.1.3.6.1.4.1.31926.35.1.2.3.1.1.7
.1.3.6.1.4.1.31926.35.1.2.3.1.1.8
.1.3.6.1.4.1.31926.35.1.2.3.1.1.9
.1.3.6.1.4.1.31926.35.2
Dependencies (24) 5 direct · 19 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (15)
Enumeration
asUp(1)
asDown(2)
The desired state of the interface.
Can be either enabled/up or disabled/down.
Unsigned32 range: 1..8
Display format: d
Count of active RF tiles.
Integer32 range: -180..180
Display format: d
Beam direction for azimuth or elevation.
Unsigned32 range: 0..119
Display format: d
Tx/Rx beam index.
Enumeration
rdcs0(0)
rdcs1(1)
rdcsUnspecified(10)
Time slot at which the local node exchanges control information with the remote node.
Only valid for DN to DN RF links. For DN to CN RF links must be set to unspecified.
Enumeration
rdlsConnected(1)
rdlsLinkAdminDown(2)
rdlsSectorAdminDown(3)
rdlsWaitingUpstreamConnection(4)
rdlsWaitingInQueue(5)
rdlsWaitingPolarityPeriod(6)
rdlsIgnition(7)
Possible states of RF link ignition.
Possible options are:
1. The RF link is connected.
2. The RF link admin status is down.
3. The local sectors of the RF link are down.
4. Waiting for the incoming RF link.
5. Waiting in queue.
6. Waiting for next polarity period. In this state DN to DN RF links will wait
while sector polarity will math current ignition polarity.
7. Link ignition in progress.
Enumeration
rdrntDn(1)
rdrntCn(2)
Whether the TG unit is a distribution node (DN) or a client node (CN).
Unsigned32 range: 1..15
Display format: b
A bit map representation of the local or remote RF sectors list.
For example: sector 1 and 2 will be represented as 0x3.
Enumeration
rgiUnspecified(0)
rgiVal1(1)
rgiVal2(2)
Index of the radio Golay code sequence.
Must be specified in TG node defaults and/or for each sector.
Could be overridden in RF link.
Based on TG radio definitions.
Unsigned32 range: 0..12
Display format: d
Modulation Coding Scheme index (MCS).
OctetString range: 1..8
Display format: 255a
Multihaul TG Node ID/Assigned Name (AN). The name identifies the Multihaul TG node (DN or CN) across RF link.
The AN must be unique across the entire Multihaul TG network.
Enumeration
rnlrInitiator(1)
rnlrResponder(2)
Whether the local node initiated the RF link or responded to the RF link request.
Unsigned32 range: 0..3800
Display format: d
Over-the-air (OTA) rate.
Unsigned32 range: 1..4
Display format: d
Index of a radio sector.
Unsigned32 range: 6..31
Display format: d
Transmit power index (relative).
1. For MCS 9 and lower the limit is 31.
2. For MCS 10 and higher the index limit is 25.
Conformance Groups (1)
The collection of objects used to represent the general entity information.
.1.3.6.1.4.1.31926.35.2.1