QTECH-WLAN-QOS-EXTRA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
40

qtechWMMStatusTable

table
.1.3.6.1.4.1.27514.1.1.10.2.60.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechWMMStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-QOS-EXTRA-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-QOS-EXTRA-MIB::qtechWMMStatusTable' 
wmm status for each wlan
qtechWMMStatusEntry row .1.3.6.1.4.1.27514.1.1.10.2.60.1.1.1
Indexes
Column Syntax OID
qtechWMMStatus
the wmm enable WMM or disable WMM
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.27514.1.1.10.2.60.1.1.1.1
qtechAPSDStatus
display APSD-Support is enable or disable
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.27514.1.1.10.2.60.1.1.1.2
qtechSMPSStatus
display the AP's smps-support status
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.27514.1.1.10.2.60.1.1.1.3

qtechdot11EDCATable

table
.1.3.6.1.4.1.27514.1.1.10.2.60.2.1 · 1 row entry · 7 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechdot11EDCATable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-QOS-EXTRA-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-QOS-EXTRA-MIB::qtechdot11EDCATable' 
Conceptual table for EDCA default parameter values at a non-AP
          
STA. This table shall contain the four entries of the EDCA
          
parameters corresponding to four possible ACs. Index 1 corresponds
          
to AC_BK, index 2 to AC_BE, index 3 to AC_VI, and index 4 to AC_VO.
qtechdot11EDCAEntry row .1.3.6.1.4.1.27514.1.1.10.2.60.2.1.1
An Entry (conceptual row) in the EDCA Table.

ifIndex - Each IEEE 802.11 interface is represented by an ifEntry.

Interface tables in this MIB module are indexed by ifIndex.
Indexes
Column Syntax OID
qtechdot11EDCATableIndex
The auxiliary variable used to identify instances of the columnar

objects in the EDCA Table. The value of this variable is

1) 1, if the value of the AC is AC_BK.

2) 2, if the…
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.1.1.1
qtechdot11EDCATableCWmin
This attribute shall specify the value of the minimum size of the

window that shall be used by a STA for a particular AC for

generating a random number for the backoff. The value of this
…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.1.1.2
qtechdot11EDCATableCWmax
This attribute shall specify the value of the maximum size of the

window that shall be used by a STA for a particular AC for

generating a random number for the backoff. The value of this
…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.1.1.3
qtechdot11EDCATableAIFSN
This attribute shall specify the number of slots, after a SIFS

duration, that the STA, for a particular AC, shall sense the

medium idle either before transmitting or executing a backoff. Th…
Integer32r/w
Constraints:
range: 2-15
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.1.1.4
qtechdot11EDCATableTXOPLimit
This attribute shall specify the maximum number of microseconds of

an EDCA TXOP for a given AC at a non-AP STA. The default value for

this attribute is

1) 0 for all PHYs, if …
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.1.1.5
qtechdot11EDCATableMSDULifetime
This attribute shall specify (in TUs) the maximum duration an

MSDU, for a given AC, would be retained by the MAC before it is

discarded. The default value for this parameter shall be 500.
Integer32r/w
Constraints:
range: 0-500
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.1.1.6
qtechdot11EDCATableMandatory
This attribute, when TRUE, indicates that admission control is

mandatory for the given AC. When False, this attribute indicates

that the admission control is not mandatory for the given AC.…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.1.1.7

qtechdot11QAPEDCATable

table
.1.3.6.1.4.1.27514.1.1.10.2.60.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechdot11QAPEDCATable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-QOS-EXTRA-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-QOS-EXTRA-MIB::qtechdot11QAPEDCATable' 
Conceptual table for EDCA default parameter values at the AP.
          
This table shall contain the four entries of the EDCA parameters
          
corresponding to four possible ACs. Index 1 corresponds to AC_BK,
          
index 2 to AC_BE, index 3 to AC_VI, and index 4 to AC_VO.
qtechdot11QAPEDCAEntry row .1.3.6.1.4.1.27514.1.1.10.2.60.2.2.1
An Entry (conceptual row) in the EDCA Table.

ifIndex - Each IEEE 802.11 interface is represented by an

ifEntry. Interface tables in this MIB module are indexed

by ifIndex.
Indexes
Column Syntax OID
qtechdot11QAPEDCATableIndex
The auxiliary variable used to identify instances of the columnar

objects in the EDCA Table. The value of this variable is

1) 1, if the value of the AC is AC_BK.

2) 2, if t…
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.2.1.1
qtechdot11QAPEDCATableCWmin
This attribute shall specify the value of the minimum size of the

window that shall be used by an AP for a particular AC for

generating a random number for the backoff. The value of this
…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.2.1.2
qtechdot11QAPEDCATableCWmax
This attribute shall specify the value of the maximum size of the

window that shall be used by an AP for a particular AC for

generating a random number for the backoff. The value of this
…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.2.1.3
qtechdot11QAPEDCATableAIFSN
This attribute shall specify the number of slots, after a SIFS

duration, that the AP, for a particular AC, shall sense the

medium idle either before transmitting or executing a backoff. The…
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.2.1.4
qtechdot11QAPEDCATableTXOPLimit
This attribute shall specify the maximum number of microseconds of

an EDCA TXOP for a given AC at the AP. The default value for

this attribute is

1) 0 for all PHYs, if qtechd…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.2.1.5
qtechdot11QAPEDCATableMSDULifetime
This attribute shall specify (in TUs) the maximum duration an

MSDU, for a given AC, would be retained by the MAC at the AP before

it is discarded. The default value for this parameter shall…
Integer32r/w
Constraints:
range: 0-500
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.2.1.6
qtechdot11QAPEDCATableMandatory
This attribute, when TRUE, indicates that admission control is

mandatory for the given AC. When False, this attribute indicates

that the admission control is not mandatory for the given AC.…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.2.1.7

qtechWlanEDCATable

table
.1.3.6.1.4.1.27514.1.1.10.2.60.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechWlanEDCATable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-QOS-EXTRA-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-QOS-EXTRA-MIB::qtechWlanEDCATable' 
some wmm access catagery's attribution doesn't appeared in stadard MIBS
so , we add it here
qtechEDCAStatusEntry row .1.3.6.1.4.1.27514.1.1.10.2.60.2.3.1
Indexes
Column Syntax OID
qtechQAPEDCAqueuedepth
software queue depth for each wmm access catagery
Integer32r/w
Constraints:
range: 1-512
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.3.1.1
qtechQAPEDCAcacPolicy
now only have two kind of CAC policy , usernum-based (1) and channelutilization-based {2}
Enumerationr/w
Enumerated Values:
0nocac
1usernum-based
2channelutilization-based
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.3.1.2
qtechQAPEDCAcacParam
cac param used to determine whether the sta is allowed to be in the high access catagery
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.27514.1.1.10.2.60.2.3.1.3

qtechWlanDefaultACTable

table
.1.3.6.1.4.1.27514.1.1.10.2.60.3.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechWlanDefaultACTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-QOS-EXTRA-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-QOS-EXTRA-MIB::qtechWlanDefaultACTable' 
this  table used by non-wmm sta, 
we map the pkt from non-wmm sta to the default WMM access catagery
qtechWlanDefaultACEntry row .1.3.6.1.4.1.27514.1.1.10.2.60.3.1.1.1
Indexes
Column Syntax OID
qtechWlanDefualtACnum
this defines the ap's default WMM AC ,used for non-wmm sta
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.60.3.1.1.1.1
qtechWlanMaxstadot1ptag
max 802.11e tags a sta in the wlan can use,
all pkt have tag larger than this value will fall in the default AC
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.60.3.1.1.1.2

qtechPrivMappingAPstatusTable

table
.1.3.6.1.4.1.27514.1.1.10.2.60.3.2.1 · 1 row entry · 2 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechPrivMappingAPstatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-QOS-EXTRA-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-QOS-EXTRA-MIB::qtechPrivMappingAPstatusTable' 
when use CAPWAP, we must map pkt belong to certain WMM-AC to a Certian DSCP priv/802.1p pri
and as we must encap the pkt ,we must support two kind of mappings - trunnel and inner,
you can get the concept in RFC 5416
qtechAPdefaultStatusMappingEntry row .1.3.6.1.4.1.27514.1.1.10.2.60.3.2.1.1
Indexes
Column Syntax OID
qtechdot1pmappingstatus
How to set the pkt's 802.1p tag
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.60.3.2.1.1.1
qtechdscpmappingstatus
how to set the pkt's dscp tag
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.60.3.2.1.1.2

qtechPrivMappingAPDefaultTable

table
.1.3.6.1.4.1.27514.1.1.10.2.60.3.2.2 · 1 row entry · 2 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechPrivMappingAPDefaultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-QOS-EXTRA-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-QOS-EXTRA-MIB::qtechPrivMappingAPDefaultTable' 
when use CAPWAP, we must map pkt belong to certain WMM-AC to a Certian DSCP priv/802.1p pri
and as we must encap the pkt ,we must support two kind of mappings - trunnel and inner,
you can get the concept in RFC 5416
qtechPrivMappingAPDefaultEntry row .1.3.6.1.4.1.27514.1.1.10.2.60.3.2.2.1
Indexes
Column Syntax OID
qtechAPdefaultDSCPTag
DEFAULT dscp tag for certain AC
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.27514.1.1.10.2.60.3.2.2.1.1
qtechAPdefaultDot1pTag
default DOT1P TAG VALUE FOR CERTAIN ac
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.60.3.2.2.1.2

qtechSVPMappingTable

table
.1.3.6.1.4.1.27514.1.1.10.2.60.3.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechSVPMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-QOS-EXTRA-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-QOS-EXTRA-MIB::qtechSVPMappingTable' 
dot11radio-SVP-pkt --> WMM-AC:pkt
qtechSVPMappingEntry row .1.3.6.1.4.1.27514.1.1.10.2.60.3.3.1.1
svp mapping info
Indexes
Column Syntax OID
qtechSVPmappingStatus
enable or disable the svp mapping
Enumerationr/w
Enumerated Values:
0enable
1disable
 .1.3.6.1.4.1.27514.1.1.10.2.60.3.3.1.1.1
qtechSVPmappingAC
MAPPING AC
Enumerationr/w
Enumerated Values:
1wmmvo
2wmmvi
3wmmbe
4wmmbk
 .1.3.6.1.4.1.27514.1.1.10.2.60.3.3.1.1.2

qtechWlanRatelimitTable

table
.1.3.6.1.4.1.27514.1.1.10.2.60.4.1 · 1 row entry · 4 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechWlanRatelimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-QOS-EXTRA-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-QOS-EXTRA-MIB::qtechWlanRatelimitTable' 
WLAN-based ratelimit
qtechWlanRatelimitEntry row .1.3.6.1.4.1.27514.1.1.10.2.60.4.1.1
Indexes
Column Syntax OID
qtechWlanRateLimitDirect
direction of the ratelimited stream
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.60.4.1.1.1
qtechWlanRatelimitStatus
enable | diable the ratelimit
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.60.4.1.1.2
qtechWlanAverageRate
average rate of the limited stream
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.60.4.1.1.3
qtechWlanBurstRate
burst rate of the limited stream
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.60.4.1.1.4

qtechAPRatelimitTable

table
.1.3.6.1.4.1.27514.1.1.10.2.60.4.2 · 1 row entry · 4 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechAPRatelimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-QOS-EXTRA-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-QOS-EXTRA-MIB::qtechAPRatelimitTable' 
ap-based ratelimit
qtechAPRatelimitEntry row .1.3.6.1.4.1.27514.1.1.10.2.60.4.2.1
Indexes
Column Syntax OID
qtechAPRateLimitDirect
direction of the ratelimited stream
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.60.4.2.1.1
qtechAPRatelimitStatus
enable | diable the ratelimit
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.60.4.2.1.2
qtechAPAverageRate
average rate of the limited stream
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.60.4.2.1.3
qtechAPBurstRate
burst rate of the limited stream
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.60.4.2.1.4

qtechUserRatelimitTable

table
.1.3.6.1.4.1.27514.1.1.10.2.60.4.3 · 1 row entry · 4 columns
Open in standard view
Uses the qtech variant from /opt/observium/mibs/qtech.
Command help
Walk qtechUserRatelimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-WLAN-QOS-EXTRA-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-WLAN-QOS-EXTRA-MIB::qtechUserRatelimitTable' 
MAC-based ratelimit
qtechUserRatelimitEntry row .1.3.6.1.4.1.27514.1.1.10.2.60.4.3.1
Indexes
Column Syntax OID
qtechUserRateLimitDirect
direction of the ratelimited stream
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.60.4.3.1.1
qtechUserRatelimitStatus
enable | diable the ratelimit
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.27514.1.1.10.2.60.4.3.1.2
qtechUserAverageRate
average rate of the limited stream
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.60.4.3.1.3
qtechUserBurstRate
burst rate of the limited stream
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.27514.1.1.10.2.60.4.3.1.4