QTECH-FIBER-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
65
qtechFiberTable
table
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1
·
1 row entry
·
65 columns
Uses the qtech variant from
Command help
/opt/observium/mibs/qtech.
Walk qtechFiberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'QTECH-FIBER-MIB' -M '/opt/observium/mibs/qtech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'QTECH-FIBER-MIB::qtechFiberTable'
A table for getting Fiber Module information
Entry of a Fiber Module information.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Port index of the port.
|
QTECH-TCIfIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Discription of the port.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Transceiver type of the Fiber module insered into the port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Connector type of the Fiber module insered into the port.
If the transceiver type of Fiber module is unknown(1), then this object contains a zero value. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of wavelength of the Fiber module insered into the port.
If the transceiver type of Fiber module is either fiber100CopperSFP(7) or fiber1000CopperSFP(13) (or fiber10GCopperSFPPlus(14), or fiber10GCopperXFP(… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using sin… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 62.… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 62.… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 50 … |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 50 … |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 50 … |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 200… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using cop… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length of the Cable assembly passive. The value is in units of meters. A value of zero means that the transceiver … |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
This object indicates that whether the Digital Diagnostic Monitors is implemeted.
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The serial number of the Fiber module insered into the port.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The temperature of the Fiber module insered into the port.
The value is in units of degrees Celsius. If the qtechFiberDDMSupportStatus is false, the temperature value is 0. |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the temperature of the Fiber module is in
the normal level. The status warning(3) indicates that the temperature of the Fiber module exceeds high warning level or is below low warning le… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The voltage of the Fiber module insered into the port.
The value is in units of mVolts. If the qtechFiberDDMSupportStatus is false, the voltage value is 0. |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the voltage of the Fiber module is in
the normal level. The status warning(3) indicates that the voltage of the Fiber module exceeds high warning level or is below low warning level. Th… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.20 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The bias of the Fiber module insered into the port.
The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the bias value is 0. |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the bias of the Fiber module is in
the normal level. The status warning(3) indicates that the bias of the Fiber module exceeds high warning level or is below low warning level. The stat… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.22 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The bias in Channel 1 of the QSFP+ Fiber module insered into the port.
The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the bias value in Channel 1 is 0. |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.23 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the bias in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates that the bias in the Channel 1 exceeds high warning level or is below low warning level. The s… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.24 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The bias in Channel 2 of the QSFP+ Fiber module insered into the port.
The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the bias value in Channel 2 is 0. |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.25 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the bias in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates that the bias in the Channel 2 exceeds high warning level or is below low warning level. The s… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.26 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The bias in Channel 3 of the QSFP+ Fiber module insered into the port.
The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the bias value in Channel 3 is 0. |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.27 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the bias in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates that the bias in the Channel 3 exceeds high warning level or is below low warning level. The s… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.28 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The bias in Channel 4 of the QSFP+ Fiber module insered into the port.
The value is in units of uA. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the bias value in Channel 4 is 0. |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.29 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the bias in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates that the bias in the Channel 4 exceeds high warning level or is below low warning level. The s… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.30 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The integer part of Rx power of the Fiber module insered into the port.
The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the integer part of… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.31 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The decimal part of Rx power of the Fiber module insered into the port.
The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the decimal part of… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.32 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3). If the qtechFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP (or not … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.33 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the Rx power of the Fiber module is in
the normal level. The status warning(3) indicates that the Rx power of the Fiber module exceeds high warning level or is below low warning level. … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.34 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The integer part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.35 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The decimal part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.36 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 1 of QSFP+. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.37 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the Rx power in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates that the Rx power in the Channel 1 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.38 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The integer part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.39 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The decimal part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.40 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 2 of QSFP+. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.41 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the Rx power in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates that the Rx power in the Channel 2 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.42 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The integer part of Rx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.43 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The decimal part of Rx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.44 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 3 of QSFP+. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.45 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the Rx power in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates that the Rx power in the Channel 3 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.46 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The integer part of Rx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.47 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The decimal part of Rx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.48 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 4 of QSFP+. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.49 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the Rx power in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates that the Rx power in the Channel 4 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.50 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The integer part of Tx power of the Fiber module insered into the port.
The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the integer part of… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.51 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The decimal part of Tx power of the Fiber module insered into the port.
The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the decimal part of… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.52 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the Tx power of the Fiber module is in
the normal level. The status warning(3) indicates that the Tx power of the Fiber module exceeds high warning level or is below low warning level. … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.53 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The integer part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.54 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The decimal part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.55 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the Tx power in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates that the Tx power in the Channel 1 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.56 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The integer part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.57 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The decimal part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.58 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the Tx power in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates that the Tx power in the Channel 2 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.59 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The integer part of Tx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.60 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The decimal part of Tx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.61 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the Tx power in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates that the Tx power in the Channel 3 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.62 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The integer part of Tx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.63 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The decimal part of Tx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the qtechFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal pa… |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.64 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The status ok(2) indicates that the Tx power in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates that the Tx power in the Channel 4 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.27514.1.1.10.2.105.1.1.1.65 |
