PT-RADIOLINK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

113

ctTable

table

.1.3.6.1.4.1.193.223.2.7.1 · 1 row entry · 60 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk ctTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PT-RADIOLINK-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PT-RADIOLINK-MIB::ctTable'

A table of CT Table entries.

ctEntry row .1.3.6.1.4.1.193.223.2.7.1.1

An entry of CT application.

Indexes

No indexes recorded

Column Syntax OID

actualInputPower

Actual input power of the CT in dBm

OctetString

.1.3.6.1.4.1.193.223.2.7.1.1.1

actualOutputPower

Actual output power of the CT in dBm

OctetString

.1.3.6.1.4.1.193.223.2.7.1.1.2

actualRxAcm

Actual rx modulation and coding

OctetString

.1.3.6.1.4.1.193.223.2.7.1.1.3

actualTxAcm

Actual tx modulation and coding

OctetString

.1.3.6.1.4.1.193.223.2.7.1.1.4

ctDistinguishedName

Unique id/name of the carrier termination, according to FDN (rack/slot/port/class)

OctetString

.1.3.6.1.4.1.193.223.2.7.1.1.5

description

User description of the carrior termination.

OctetStringr/w

.1.3.6.1.4.1.193.223.2.7.1.1.6

carrierId

Id of the carrier. (A, B, C, D)
Used in XPIC & MIMO configurations to check that the carrier termination is connected to the correct far end carrier termination.
Should be the same id on both sides of the hop. Defaulte…

Enumerationr/w

Enumerated Values:

1	a
2	b
3	c
4	d
5	unknown

.1.3.6.1.4.1.193.223.2.7.1.1.7

ctStatus

The status of the carrier termination, hop

Enumeration

Enumerated Values:

1	down
2	up
3	na
4	unknown
5	degraded

.1.3.6.1.4.1.193.223.2.7.1.1.8

frameId

A unique identifier for the radio frame to be used.
Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid combination.

Integer32r/w

Constraints:
range: 0-10000

.1.3.6.1.4.1.193.223.2.7.1.1.9

txFrequency

Selected frequency on the transmitter (kHz).
Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid combination.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.10

minTxFrequency

Minimum Tx frequency possible to use, given by the selected frame-id

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.11

maxTxFrequency

Maximum Tx frequency possible to use, given by the selected frame-id

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.12

rxFrequency

Selected frequency on the receiver (kHz).
Wanted frameId, txFrequency, rxFrequency, referenceSec, selectedMinAcm and selectedMaxAcm must be a valid combination.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.13

minRxFrequency

Minimum Rx frequency possible to use, given by the selected frame-id

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.14

maxRxFrequency

Maximum Rx frequency possible to use, given by the selected frame-id

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.15

frequencyStepSize

Frequency step size in kHz

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.16

duplexDistance

Distance between Tx and Rx frequencies (kHz)

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.17

duplexType

The duplex type is given by the equipment (Fixed,Variable)

Enumeration

Enumerated Values:

1	variable
2	fixed
3	unknown

.1.3.6.1.4.1.193.223.2.7.1.1.18

duplexConfig

Enabling or disabling configuration of Rx freq using duplex distance

EnableStatusTCr/w

Type Values:

1	enabled
2	disabled
3	unknown

Description:

An integer which indicates the enabled status.

.1.3.6.1.4.1.193.223.2.7.1.1.19

autoFreqSelection

Automatic frequency selection mode

Enumerationr/w

Enumerated Values:

1	disabled
2	master
3	slave
4	unknown

.1.3.6.1.4.1.193.223.2.7.1.1.20

autoFreqSelectedChannel

Automatic frequency selected channel

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.21

autoFreqSelectionStatus

Automatic frequency status

Enumeration

Enumerated Values:

1	idle
2	searchingForSlave
3	requestingInfoFromSlave
4	waitingForMaster
5	waitingForChannelInfoRequest
6	inProgress
7	initializing
8	finished
9	failed
10	unknown

.1.3.6.1.4.1.193.223.2.7.1.1.22

channelSpacing

Channel spacing

Enumeration

Enumerated Values:

1	cs7MHz
2	cs10MHz
3	cs14MHz
4	cs20MHz
5	cs28MHz
6	cs30MHz
7	cs40MHz
8	cs50MHz
9	cs56MHz
10	cs250MHz
11	cs60MHz
12	cs500MHz
13	cs750MHz
14	cs100MHz
15	cs150MHz
16	cs200MHz
17	cs125MHz
18	cs80MHz
19	cs112MHz
20	cs1000MHz
21	cs1250MHz
22	cs1500MHz
23	cs62p5MHz
24	cs2000MHz
25	unknown

.1.3.6.1.4.1.193.223.2.7.1.1.23

polarization

Antenna polarization

Enumerationr/w

Enumerated Values:

1	notSpecified
2	horizontal
3	vertical
4	unknown

.1.3.6.1.4.1.193.223.2.7.1.1.24

txOperStatus

Operative status of the transmitter

Enumeration

Enumerated Values:

1	unknown
2	off
3	on
4	standby

.1.3.6.1.4.1.193.223.2.7.1.1.25

txAdminStatus

Administrative status of the transmitter

Enumerationr/w

Enumerated Values:

1	off
2	on
3	unknown

.1.3.6.1.4.1.193.223.2.7.1.1.26

selectedOutputPowerType

Selected output power type

Enumerationr/w

Enumerated Values:

1	standard
2	high
3	unknown

.1.3.6.1.4.1.193.223.2.7.1.1.27

availableOutputPowerType

Available output power type

Enumerationr/w

Enumerated Values:

1	standard
2	high
3	unknown

.1.3.6.1.4.1.193.223.2.7.1.1.28

selectedMinOutputPower

Selected min output power.
Selected min & max output power should be set to the same value for RTPC mode, otherwise the hop operates in ATPC mode.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.29

selectedMaxOutputPower

Selected max output power.
Selected min & max output power should be set to the same value for RTPC mode, otherwise the hop operates in ATPC mode.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.30

availableMinOutputPower

The minimum output power supported (dBm).
The system shows a value if the equipment is available and a frame id has been selected.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.31

availableMaxOutputPower

The maximum output power supported (dBm).
The system shows a value if the equipment is available and a frame id has been selected.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.32

referenceSec

Each modulation is compliant to a Reference Spectrum Efficiency Class (RSEC).
When running Adaptive Coding/Modulation, one SEC has to be selected for all the coding/modulations between selectedMinACM and selectedMaxACM…

Enumerationr/w

Enumerated Values:

1	noAvailable
2	sec2
4	sec4L
5	sec4H
7	sec5B
9	sec6B
10	sec5LB
11	sec5HB
12	sec6LB
13	sec6HB
14	sec7B
15	unknown

.1.3.6.1.4.1.193.223.2.7.1.1.33

targetInputPowerFarEnd

The wanted input power at far end (dBm), when running ATPC

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.34

berAlarmThreshold

Threshold for the BER alarm

Enumerationr/w

Enumerated Values:

1	tenExpMinus6
2	tenExpMinus3

.1.3.6.1.4.1.193.223.2.7.1.1.35

inputPowerAlarmThreshold

Threshold for the input power alarm

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.36

plannedAlignmentInputPower

The planned received input power (dBm) dependent upon selected minimum ACM and corresponding output power.
Used when doing alignment

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.37

atpcFallback

Enable or disable the output power fall back function

EnableStatusTCr/w

Type Values:

1	enabled
2	disabled
3	unknown

Description:

An integer which indicates the enabled status.

.1.3.6.1.4.1.193.223.2.7.1.1.38

atpcFallbackTimer

Specifies the timer for output power fall back (# of seconds)

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.39

atpcFallbackOutputPower

The ATPC fallback output power

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.40

xpicStatus

Status of the XPIC function.

XpicMimoTC

Type Values:

1	notAvailable
2	locked
3	unlocked
4	unknown

Description:

An integer which indicates the XPIC or MIMO status.

.1.3.6.1.4.1.193.223.2.7.1.1.41

mimoStatus

Status of the MIMO function.

XpicMimoTC

Type Values:

1	notAvailable
2	locked
3	unlocked
4	unknown

Description:

An integer which indicates the XPIC or MIMO status.

.1.3.6.1.4.1.193.223.2.7.1.1.42

actualSnir

Actual signal to noise plus interference ratio (dB).

OctetString

.1.3.6.1.4.1.193.223.2.7.1.1.43

actualXpi

The carrier to cross-polar interference level (dBc).

OctetString

.1.3.6.1.4.1.193.223.2.7.1.1.44

actualSi

Spatial interference between the CTs when MIMO is configured.

OctetString

.1.3.6.1.4.1.193.223.2.7.1.1.45

actualTxCapacity

Actual capacity supported by the carrier termination.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.46

licensedCapacity

Wanted or installed license for the capacity allowed for the carrier termination.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.47

availableMinCapacity

Minimum capacity possible to use. Given by the selected frame-id (kbit/s)

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.48

availableMaxCapacity

Maximum capacity possible to use. Given by the selected frame-id (kbit/s)

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.49

selectedMinCapacity

Selected minimum capacity, derived from selected minimum ACM (kbit/s)

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.50

selectedMaxCapacity

Selected maximum capacity, derived from selected maximum ACM (kbit/s)

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.51

wantedLicensedCapacity

Wanted licensed capacity and creation of LRF for the carrier termination (kbit/s)

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.1.1.52

availableMinAcm

Minimum ACM possible to use, given by the selected frame id.

AcmTC

Type Values:

1	acmHalfBpsk
2	acmHalfBpskLight
3	acmHalfBpskStrong
4	acmBpsk
5	acmBpskLight
6	acmBpskStrong
7	acm4Qam
8	acm4QamLight
9	acm4QamStrong
10	acm16Qam
11	acm16QamLight
12	acm16QamStrong
13	acm32Qam
14	acm32QamLight
15	acm32QamStrong
16	acm64Qam
17	acm64QamLight
18	acm64QamStrong
19	acm128Qam
20	acm128QamLight
21	acm128QamStrong
22	acm256Qam
23	acm256QamLight
24	acm256QamStrong
25	acm512Qam
26	acm512QamLight
27	acm512QamStrong
28	acm1024Qam
29	acm1024QamLight
30	acm1024QamStrong
31	acm2048Qam
32	acm2048QamLight
33	acm2048QamStrong
34	acm4096Qam
35	acm4096QamLight
36	acm4096QamStrong

Description:

An integer which indicates the ACM.

.1.3.6.1.4.1.193.223.2.7.1.1.53

availableMaxAcm

Maximum ACM possible to use, given by the selected frame id

AcmTC

Type Values:

1	acmHalfBpsk
2	acmHalfBpskLight
3	acmHalfBpskStrong
4	acmBpsk
5	acmBpskLight
6	acmBpskStrong
7	acm4Qam
8	acm4QamLight
9	acm4QamStrong
10	acm16Qam
11	acm16QamLight
12	acm16QamStrong
13	acm32Qam
14	acm32QamLight
15	acm32QamStrong
16	acm64Qam
17	acm64QamLight
18	acm64QamStrong
19	acm128Qam
20	acm128QamLight
21	acm128QamStrong
22	acm256Qam
23	acm256QamLight
24	acm256QamStrong
25	acm512Qam
26	acm512QamLight
27	acm512QamStrong
28	acm1024Qam
29	acm1024QamLight
30	acm1024QamStrong
31	acm2048Qam
32	acm2048QamLight
33	acm2048QamStrong
34	acm4096Qam
35	acm4096QamLight
36	acm4096QamStrong

Description:

An integer which indicates the ACM.

.1.3.6.1.4.1.193.223.2.7.1.1.54

selectedMinAcm

Selected minimum coding/modulation. If selectedMinACM = selectedMaxACM, then the modulation is fixed

AcmTCr/w

Type Values:

1	acmHalfBpsk
2	acmHalfBpskLight
3	acmHalfBpskStrong
4	acmBpsk
5	acmBpskLight
6	acmBpskStrong
7	acm4Qam
8	acm4QamLight
9	acm4QamStrong
10	acm16Qam
11	acm16QamLight
12	acm16QamStrong
13	acm32Qam
14	acm32QamLight
15	acm32QamStrong
16	acm64Qam
17	acm64QamLight
18	acm64QamStrong
19	acm128Qam
20	acm128QamLight
21	acm128QamStrong
22	acm256Qam
23	acm256QamLight
24	acm256QamStrong
25	acm512Qam
26	acm512QamLight
27	acm512QamStrong
28	acm1024Qam
29	acm1024QamLight
30	acm1024QamStrong
31	acm2048Qam
32	acm2048QamLight
33	acm2048QamStrong
34	acm4096Qam
35	acm4096QamLight
36	acm4096QamStrong

Description:

An integer which indicates the ACM.

.1.3.6.1.4.1.193.223.2.7.1.1.55

selectedMaxAcm

Selected maximum coding/modulation. If selectedMinACM = selectedMaxACM, then the modulation is fixed

AcmTCr/w

Type Values:

1	acmHalfBpsk
2	acmHalfBpskLight
3	acmHalfBpskStrong
4	acmBpsk
5	acmBpskLight
6	acmBpskStrong
7	acm4Qam
8	acm4QamLight
9	acm4QamStrong
10	acm16Qam
11	acm16QamLight
12	acm16QamStrong
13	acm32Qam
14	acm32QamLight
15	acm32QamStrong
16	acm64Qam
17	acm64QamLight
18	acm64QamStrong
19	acm128Qam
20	acm128QamLight
21	acm128QamStrong
22	acm256Qam
23	acm256QamLight
24	acm256QamStrong
25	acm512Qam
26	acm512QamLight
27	acm512QamStrong
28	acm1024Qam
29	acm1024QamLight
30	acm1024QamStrong
31	acm2048Qam
32	acm2048QamLight
33	acm2048QamStrong
34	acm4096Qam
35	acm4096QamLight
36	acm4096QamStrong

Description:

An integer which indicates the ACM.

.1.3.6.1.4.1.193.223.2.7.1.1.56

actualRxAcmTC

Actual rx modulation and coding

AcmTC

Type Values:

1	acmHalfBpsk
2	acmHalfBpskLight
3	acmHalfBpskStrong
4	acmBpsk
5	acmBpskLight
6	acmBpskStrong
7	acm4Qam
8	acm4QamLight
9	acm4QamStrong
10	acm16Qam
11	acm16QamLight
12	acm16QamStrong
13	acm32Qam
14	acm32QamLight
15	acm32QamStrong
16	acm64Qam
17	acm64QamLight
18	acm64QamStrong
19	acm128Qam
20	acm128QamLight
21	acm128QamStrong
22	acm256Qam
23	acm256QamLight
24	acm256QamStrong
25	acm512Qam
26	acm512QamLight
27	acm512QamStrong
28	acm1024Qam
29	acm1024QamLight
30	acm1024QamStrong
31	acm2048Qam
32	acm2048QamLight
33	acm2048QamStrong
34	acm4096Qam
35	acm4096QamLight
36	acm4096QamStrong

Description:

An integer which indicates the ACM.

.1.3.6.1.4.1.193.223.2.7.1.1.57

actualTxAcmTC

Actual tx modulation and coding

AcmTC

Type Values:

1	acmHalfBpsk
2	acmHalfBpskLight
3	acmHalfBpskStrong
4	acmBpsk
5	acmBpskLight
6	acmBpskStrong
7	acm4Qam
8	acm4QamLight
9	acm4QamStrong
10	acm16Qam
11	acm16QamLight
12	acm16QamStrong
13	acm32Qam
14	acm32QamLight
15	acm32QamStrong
16	acm64Qam
17	acm64QamLight
18	acm64QamStrong
19	acm128Qam
20	acm128QamLight
21	acm128QamStrong
22	acm256Qam
23	acm256QamLight
24	acm256QamStrong
25	acm512Qam
26	acm512QamLight
27	acm512QamStrong
28	acm1024Qam
29	acm1024QamLight
30	acm1024QamStrong
31	acm2048Qam
32	acm2048QamLight
33	acm2048QamStrong
34	acm4096Qam
35	acm4096QamLight
36	acm4096QamStrong

Description:

An integer which indicates the ACM.

.1.3.6.1.4.1.193.223.2.7.1.1.58

alignmentMode

Enable or disable the alignment mode

EnableStatusTCr/w

Type Values:

1	enabled
2	disabled
3	unknown

Description:

An integer which indicates the enabled status.

.1.3.6.1.4.1.193.223.2.7.1.1.59

rfLoop

Enable or disable the rf loop

EnableStatusTCr/w

Type Values:

1	enabled
2	disabled
3	unknown

Description:

An integer which indicates the enabled status.

.1.3.6.1.4.1.193.223.2.7.1.1.60

rltTable

table

.1.3.6.1.4.1.193.223.2.7.3 · 1 row entry · 25 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk rltTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PT-RADIOLINK-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PT-RADIOLINK-MIB::rltTable'

A table of RLT Table entries.

rltEntry row .1.3.6.1.4.1.193.223.2.7.3.1

An entry of RLT application.

Indexes

No indexes recorded

Column Syntax OID

rltDistinguishedName

Unique id/name of the radio link termination, according to FDN (rack/slot/port/class)

OctetString

.1.3.6.1.4.1.193.223.2.7.3.1.1

neIpAddress

NE IP address

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.193.223.2.7.3.1.2

neIpv6Address

NE IP V6 address

INET-ADDRESS-MIBInetAddressIPv6

Type Constraints:
range: 16

.1.3.6.1.4.1.193.223.2.7.3.1.3

neName

NE Name

OctetString

.1.3.6.1.4.1.193.223.2.7.3.1.4

neType

NE Type

Enumeration

Enumerated Values:

1	unknown
2	mle
3	xfMle
4	tn
5	cn
6	pt

.1.3.6.1.4.1.193.223.2.7.3.1.5

User defined id of the radio link terminal

OctetStringr/w

.1.3.6.1.4.1.193.223.2.7.3.1.6

rltStatus

The status of the radio link terminal

Enumeration

Enumerated Values:

1	down
2	up
3	na
4	unknown
5	degraded

.1.3.6.1.4.1.193.223.2.7.3.1.7

mode

The status of the radio link terminal

Enumerationr/w

Enumerated Values:

1	mode1plus0
2	mode1plus1CSB
3	mode1plus1RLP
4	mode2plus0RLB
5	mode2plus1CSB
6	mode2plus1RLP
7	mode2plus2CSB
8	mode2plus2RLP
9	mode3plus0RLB
10	mode4plus0RLB
11	notAvailable11
12	notAvailable12
13	notAvailable13
14	notAvailable14
15	mode3plus1RLP
16	mode3plus2RLP
17	mode3plus3RLP
18	mode4plus1RLP
19	mode4plus2RLP
20	mode4plus3RLP
21	mode4plus4RLP
22	notAvailable22
23	notAvailable23
24	notAvailable24
25	notAvailable25
26	notAvailable26
27	notAvailable27
28	mode3plus1CSB
29	mode3plus2CSB
30	mode3plus3CSB
31	mode4plus1CSB
32	mode4plus2CSB
33	mode4plus3CSB
34	mode4plus4CSB
35	unknown

.1.3.6.1.4.1.193.223.2.7.3.1.8

actualTxTotalCapacity

Actual aggregated total (packet + TDM) transmitter capacity for the radio link termination.
Limited by licenses & configuration (=nearEndLimitedCapacity) and depending on actual modulation/coding used at the moment.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.3.1.9

limitedTotalCapacity

Maximum total capacity allowed by the current configuration and installed licenses.
Aggregated from the constituent carrier termination values.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.3.1.10

protectionStatus

Status of a protected node.

Enumeration

Enumerated Values:

1	unprotected
2	protected
3	unableToProtect
4	unknown

.1.3.6.1.4.1.193.223.2.7.3.1.11

revertiveWaitToRestore

The time, in number of seconds, to wait before switching back to the preferred Tx.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.3.1.12

revertivePreferredTx

The preferred carrier termination transmitter.

Enumerationr/w

Enumerated Values:

1	ct11
2	ct12
3	ct21
4	ct22
5	notApplicable
6	unknown

.1.3.6.1.4.1.193.223.2.7.3.1.13

protectionSwitchMode

.The mode in which the switching mechanism is configured

Enumerationr/w

Enumerated Values:

1	auto
2	manual
3	autoAndRevertive
4	unknown
5	notApplicable

.1.3.6.1.4.1.193.223.2.7.3.1.14

fadeNotificationTimer

Notification is sent if fading is longer than this timer, applicable for protection.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.223.2.7.3.1.15

expectedFarEndId

Expected id of far-end terminal

OctetStringr/w

.1.3.6.1.4.1.193.223.2.7.3.1.16

farEndIdCheck

Enabling of far end id check.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	unknown

.1.3.6.1.4.1.193.223.2.7.3.1.17

cpriMode

Set the mode of the CPRI front-haul product.

Enumerationr/w

Enumerated Values:

1	master
2	slave
3	notApplicable
4	unknown

.1.3.6.1.4.1.193.223.2.7.3.1.18

cpriStatus

The status of the CPRI front-haul product.

Enumeration

Enumerated Values:

1	idle
2	waitingOnRtcSync
3	waitingOnCpri
4	waitingOnRxRequest
5	waitingOnTxRequest
6	inSync
7	unknown

.1.3.6.1.4.1.193.223.2.7.3.1.19

manualSwitch

Manual switch of protected carrier termination transmitter.

Enumerationr/w

Enumerated Values:

1	ct11
2	ct12
3	ct21
4	ct22
5	notApplicable
6	unknown

.1.3.6.1.4.1.193.223.2.7.3.1.20

mlhcOperStatus

Operative status of multi layer header compression.

Enumeration

Enumerated Values:

1	up
2	down
3	unknown

.1.3.6.1.4.1.193.223.2.7.3.1.21

mlhcAdminStatus

Administrative status of multi layer header compression.

Enumerationr/w

Enumerated Values:

1	off
2	on
3	unknown

.1.3.6.1.4.1.193.223.2.7.3.1.22

mlhcMplsConfig

MLHC/MPLS configuration.

Enumerationr/w

Enumerated Values:

1	controlWord
2	l2
3	l3
4	mplsOnly
5	unknown

.1.3.6.1.4.1.193.223.2.7.3.1.23

plcOperStatus

Operative status of payload compression.

Enumeration

Enumerated Values:

1	up
2	down
3	unknown

.1.3.6.1.4.1.193.223.2.7.3.1.24

plcAdminStatus

Administrative status of payload compression.

Enumerationr/w

Enumerated Values:

1	off
2	on
3	unknown

.1.3.6.1.4.1.193.223.2.7.3.1.25

ctG826ContinuousTable

table

.1.3.6.1.4.1.193.223.2.7.4.1 · 1 row entry · 10 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk ctG826ContinuousTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PT-RADIOLINK-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PT-RADIOLINK-MIB::ctG826ContinuousTable'

A table of CT G826 Performance Continuous counters entries.
The counters are reset by ctG826Reset

ctG826ContinuousEntry row .1.3.6.1.4.1.193.223.2.7.4.1.1

An entry of CT G826 Performance Continuous counters.

Indexes

No indexes recorded

Column Syntax OID

ctG826TimeElapsed

Time elapsed in seconds since last PMReset

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.223.2.7.4.1.1.1

ctBBE

Background Block Errors

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.223.2.7.4.1.1.2

ctBBER

Background Block Errors Ratio

OctetString

.1.3.6.1.4.1.193.223.2.7.4.1.1.3

ctES

Error seconds

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.223.2.7.4.1.1.4

ctESR

Error seconds Ratio

OctetString

.1.3.6.1.4.1.193.223.2.7.4.1.1.5

ctSES

Severely error seconds

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.223.2.7.4.1.1.6

ctSESR

Severely error seconds Ratio

OctetString

.1.3.6.1.4.1.193.223.2.7.4.1.1.7

ctBB

Background blocks

OctetString

.1.3.6.1.4.1.193.223.2.7.4.1.1.8

ctUAS

Unavailable seconds

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.223.2.7.4.1.1.9

ctG826Reset

Reset the continuous PM counters

Enumerationr/w

Enumerated Values:

1	other
2	noReset
3	reset

.1.3.6.1.4.1.193.223.2.7.4.1.1.10

ctG826Current15mTable

table

.1.3.6.1.4.1.193.223.2.7.4.2 · 1 row entry · 9 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk ctG826Current15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PT-RADIOLINK-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PT-RADIOLINK-MIB::ctG826Current15mTable'

A table of CT Performance G826 15 m current counters Table entries.

ctG826Current15mEntry row .1.3.6.1.4.1.193.223.2.7.4.2.1

An entry of CT Performance G826 15 m current Table counters.

Indexes

No indexes recorded

Column	Syntax	OID
ctG826Current15mTimeElapsed Time elapsed in seconds since last PMReset	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.223.2.7.4.2.1.1`
ctCurrent15mBBE Background Block Errors	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.223.2.7.4.2.1.2`
ctCurrent15mBBER Background Block Errors Ratio	OctetString	`.1.3.6.1.4.1.193.223.2.7.4.2.1.3`
ctCurrent15mES Error seconds	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.223.2.7.4.2.1.4`
ctCurrent15mESR Error seconds Ratio	OctetString	`.1.3.6.1.4.1.193.223.2.7.4.2.1.5`
ctCurrent15mSES Severely error seconds	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.223.2.7.4.2.1.6`
ctCurrent15mSESR Severely error seconds Ratio	OctetString	`.1.3.6.1.4.1.193.223.2.7.4.2.1.7`
ctCurrent15mBB Background blocks	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.223.2.7.4.2.1.8`
ctCurrent15mUAS Unavailable seconds	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.223.2.7.4.2.1.9`

ctG826Current24hTable

table

.1.3.6.1.4.1.193.223.2.7.4.3 · 1 row entry · 9 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk ctG826Current24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PT-RADIOLINK-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PT-RADIOLINK-MIB::ctG826Current24hTable'

A table of CT Performance G826 Current 24h counters entries.

ctG826Current24hEntry row .1.3.6.1.4.1.193.223.2.7.4.3.1

An entry of CT Performance G826 Current 24 h counters.

Indexes

No indexes recorded

Column	Syntax	OID
ctG826Current24hTimeElapsed Time elapsed in seconds since last PMReset	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.223.2.7.4.3.1.1`
ctCurrent24hBBE Background Block Errors	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.223.2.7.4.3.1.2`
ctCurrent24hBBER Background Block Errors Ratio	OctetString	`.1.3.6.1.4.1.193.223.2.7.4.3.1.3`
ctCurrent24hES Error seconds	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.223.2.7.4.3.1.4`
ctCurrent24hESR Error seconds Ratio	OctetString	`.1.3.6.1.4.1.193.223.2.7.4.3.1.5`
ctCurrent24hSES Severely error seconds	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.223.2.7.4.3.1.6`
ctCurrent24hSESR Severely error seconds Ratio	OctetString	`.1.3.6.1.4.1.193.223.2.7.4.3.1.7`
ctCurrent24hBB Background blocks	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.223.2.7.4.3.1.8`
ctCurrent24hUAS Unavailable seconds	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.223.2.7.4.3.1.9`