PMIPV6-MIB
The MIB module for monitoring and controlling PMIPv6
entities.
Copyright (c) 2012 IETF Trust and the persons
identified as authors of the code. All rights
reserved.
Redistribution and use in source and binary forms,
with or without modification, is permitted pursuant
to, and subject to the license terms contained in,
the Simplified BSD License set forth in Section 4.c
of the IETF Trust's Legal Provisions Relating to IETF
Documents (http://trustee.ietf.org/license-info).
- Source file
PMIPV6-MIB- Last revised
- Identity
pmip6MIB- Base OID
1.3.6.1.2.1.206
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| IP-MIB | Ipv6AddressIfIdentifierTC |
| MOBILEIPV6-MIB | mip6BindingCacheEntry mip6MnBLEntry |
| PMIPV6-TC-MIB | Pmip6MnIdentifier Pmip6MnIndex Pmip6MnInterfaceATT Pmip6MnLLIdentifier Pmip6MnLLIndex Pmip6TimeStamp64 |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | PhysAddress TimeStamp TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PMIPV6-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PMIPV6-MIB::pmip6MIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PMIPV6-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PMIPV6-MIB::pmip6MIB'
Objects (108)
Showing 108 of 108 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.206 |
||
.1.3.6.1.2.1.206.0 |
||
.1.3.6.1.2.1.206.1 |
||
.1.3.6.1.2.1.206.1.1 |
||
.1.3.6.1.2.1.206.1.1.1 |
||
|
Bits
|
.1.3.6.1.2.1.206.1.1.1.1 |
|
.1.3.6.1.2.1.206.1.1.2 |
||
.1.3.6.1.2.1.206.1.1.2.1 |
||
.1.3.6.1.2.1.206.1.1.2.1.1 |
||
.1.3.6.1.2.1.206.1.1.2.1.1.1 |
||
.1.3.6.1.2.1.206.1.1.2.1.1.2 |
||
.1.3.6.1.2.1.206.1.1.2.1.1.3 |
||
.1.3.6.1.2.1.206.1.1.2.1.1.4 |
||
.1.3.6.1.2.1.206.1.1.2.1.1.5 |
||
.1.3.6.1.2.1.206.1.1.2.1.1.6 |
||
.1.3.6.1.2.1.206.1.1.2.1.1.7 |
||
.1.3.6.1.2.1.206.1.1.2.1.1.8 |
||
.1.3.6.1.2.1.206.1.1.3 |
||
.1.3.6.1.2.1.206.1.1.3.1 |
||
.1.3.6.1.2.1.206.1.1.3.2 |
||
.1.3.6.1.2.1.206.1.1.3.3 |
||
.1.3.6.1.2.1.206.1.1.3.4 |
||
.1.3.6.1.2.1.206.1.1.4 |
||
.1.3.6.1.2.1.206.1.1.4.1 |
||
.1.3.6.1.2.1.206.1.1.4.1.1 |
||
.1.3.6.1.2.1.206.1.1.4.1.10 |
||
.1.3.6.1.2.1.206.1.1.4.1.11 |
||
.1.3.6.1.2.1.206.1.1.4.1.12 |
||
.1.3.6.1.2.1.206.1.1.4.1.13 |
||
.1.3.6.1.2.1.206.1.1.4.1.14 |
||
.1.3.6.1.2.1.206.1.1.4.1.15 |
||
.1.3.6.1.2.1.206.1.1.4.1.16 |
||
.1.3.6.1.2.1.206.1.1.4.1.17 |
||
.1.3.6.1.2.1.206.1.1.4.1.2 |
||
.1.3.6.1.2.1.206.1.1.4.1.3 |
||
.1.3.6.1.2.1.206.1.1.4.1.4 |
||
.1.3.6.1.2.1.206.1.1.4.1.5 |
||
.1.3.6.1.2.1.206.1.1.4.1.6 |
||
.1.3.6.1.2.1.206.1.1.4.1.7 |
||
.1.3.6.1.2.1.206.1.1.4.1.8 |
||
.1.3.6.1.2.1.206.1.1.4.1.9 |
||
.1.3.6.1.2.1.206.1.2 |
||
.1.3.6.1.2.1.206.1.2.1 |
||
|
|
Enumeration
|
.1.3.6.1.2.1.206.1.2.1.1 |
.1.3.6.1.2.1.206.1.2.1.2 |
||
.1.3.6.1.2.1.206.1.2.1.2.1 |
||
.1.3.6.1.2.1.206.1.2.1.2.1.1 |
||
.1.3.6.1.2.1.206.1.2.1.2.1.2 |
||
|
Enumeration
|
.1.3.6.1.2.1.206.1.2.1.2.1.3 |
|
.1.3.6.1.2.1.206.1.2.2 |
||
.1.3.6.1.2.1.206.1.2.2.1 |
||
.1.3.6.1.2.1.206.1.2.2.2 |
||
.1.3.6.1.2.1.206.1.2.2.2.1 |
||
.1.3.6.1.2.1.206.1.2.2.2.1.1 |
||
.1.3.6.1.2.1.206.1.2.2.3 |
||
.1.3.6.1.2.1.206.1.2.2.3.1 |
||
.1.3.6.1.2.1.206.1.2.2.3.1.1 |
||
.1.3.6.1.2.1.206.1.2.2.4 |
||
.1.3.6.1.2.1.206.1.2.2.4.1 |
||
.1.3.6.1.2.1.206.1.2.2.4.1.1 |
||
.1.3.6.1.2.1.206.1.2.2.4.1.2 |
||
.1.3.6.1.2.1.206.1.2.2.4.1.3 |
||
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.206.1.2.2.4.1.4 |
|
.1.3.6.1.2.1.206.1.2.3 |
||
.1.3.6.1.2.1.206.1.2.3.1 |
||
.1.3.6.1.2.1.206.1.2.3.1.1 |
||
.1.3.6.1.2.1.206.1.2.3.1.1.1 |
||
.1.3.6.1.2.1.206.1.2.3.1.1.2 |
||
.1.3.6.1.2.1.206.1.2.3.1.1.3 |
||
.1.3.6.1.2.1.206.1.2.3.1.1.4 |
||
.1.3.6.1.2.1.206.1.2.3.1.1.5 |
||
.1.3.6.1.2.1.206.1.2.3.1.1.6 |
||
.1.3.6.1.2.1.206.1.2.3.1.1.7 |
||
.1.3.6.1.2.1.206.1.2.3.1.1.8 |
||
.1.3.6.1.2.1.206.1.2.3.1.1.9 |
||
.1.3.6.1.2.1.206.1.2.3.2 |
||
.1.3.6.1.2.1.206.1.2.3.2.1 |
||
.1.3.6.1.2.1.206.1.2.3.2.1.1 |
||
.1.3.6.1.2.1.206.1.2.3.2.1.2 |
||
.1.3.6.1.2.1.206.1.2.3.2.1.3 |
||
.1.3.6.1.2.1.206.1.2.3.2.1.4 |
||
.1.3.6.1.2.1.206.1.3 |
||
.1.3.6.1.2.1.206.1.3.1 |
||
|
|
Enumeration
|
.1.3.6.1.2.1.206.1.3.1.1 |
.1.3.6.1.2.1.206.1.3.1.2 |
||
.1.3.6.1.2.1.206.1.3.1.2.1 |
||
.1.3.6.1.2.1.206.1.3.1.2.1.1 |
||
.1.3.6.1.2.1.206.1.3.1.2.1.2 |
||
|
Enumeration
|
.1.3.6.1.2.1.206.1.3.1.2.1.3 |
|
.1.3.6.1.2.1.206.1.3.2 |
||
|
millisecondsInteger32
|
.1.3.6.1.2.1.206.1.3.2.1 |
|
|
millisecondsInteger32
|
.1.3.6.1.2.1.206.1.3.2.2 |
|
|
millisecondsInteger32
|
.1.3.6.1.2.1.206.1.3.2.3 |
|
.1.3.6.1.2.1.206.1.3.2.4 |
||
.1.3.6.1.2.1.206.1.3.2.4.1 |
||
.1.3.6.1.2.1.206.1.3.2.4.1.1 |
||
.1.3.6.1.2.1.206.1.3.2.5 |
||
.1.3.6.1.2.1.206.1.3.2.5.1 |
||
.1.3.6.1.2.1.206.1.3.2.5.1.1 |
||
.1.3.6.1.2.1.206.1.3.2.6 |
||
.1.3.6.1.2.1.206.1.3.2.6.1 |
||
.1.3.6.1.2.1.206.1.3.2.6.1.1 |
||
.1.3.6.1.2.1.206.1.3.2.6.1.2 |
||
.1.3.6.1.2.1.206.1.3.2.6.1.3 |
||
|
secondsSNMPv2-SMIGauge32
|
.1.3.6.1.2.1.206.1.3.2.6.1.4 |
|
.1.3.6.1.2.1.206.2 |
||
.1.3.6.1.2.1.206.2.1 |
||
.1.3.6.1.2.1.206.2.2 |
Dependencies (10) 7 direct · 3 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- INET-ADDRESS-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- IP-MIBrfc
- MOBILEIPV6-MIBrfc
- PMIPV6-TC-MIBrfc
- PMIPV6-MIBrfcselected
Conformance Groups (10)
Compliance Statements (14)
OID
.1.3.6.1.2.1.206.2.2.1The compliance statement for SNMP entities
that implement the PMIPV6-MIB.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the pmip6BindingHomeAddress
-- object.
--
that implement the PMIPV6-MIB.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the pmip6BindingHomeAddress
-- object.
--
Required groups
| mandatory | pmip6SystemGroup |
OID
.1.3.6.1.2.1.206.2.2.2The compliance statement for SNMP entities
that implement the PMIPV6-MIB.
that implement the PMIPV6-MIB.
Required groups
| mandatory | pmip6SystemGroup | |
| mandatory | pmip6BindingCacheGroup | |
| mandatory | pmip6StatsGroup |
OID
.1.3.6.1.2.1.206.2.2.3The compliance statement for SNMP entities
that implement the PMIPV6-MIB without support
for read-write (i.e., in read-only mode).
that implement the PMIPV6-MIB without support
for read-write (i.e., in read-only mode).
Required groups
| mandatory | pmip6SystemGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| pmip6MobileNodeGeneratedTimestampInUse | readonly | Write access is not required. | |
| pmip6FixedMagLinkLocalAddressOnAllAccessLinksType | readonly | Write access is not required. | |
| pmip6FixedMagLinkLocalAddressOnAllAccessLinks | readonly | Write access is not required. | |
| pmip6FixedMagLinkLayerAddressOnAllAccessLinks | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.206.2.2.4The compliance statement for SNMP entities
that implement the PMIPV6-MIB without support
for read-write (i.e., in read-only mode).
that implement the PMIPV6-MIB without support
for read-write (i.e., in read-only mode).
Required groups
| mandatory | pmip6SystemGroup | |
| mandatory | pmip6BindingCacheGroup | |
| mandatory | pmip6StatsGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| pmip6MobileNodeGeneratedTimestampInUse | readonly | Write access is not required. | |
| pmip6FixedMagLinkLocalAddressOnAllAccessLinksType | readonly | Write access is not required. | |
| pmip6FixedMagLinkLocalAddressOnAllAccessLinks | readonly | Write access is not required. | |
| pmip6FixedMagLinkLayerAddressOnAllAccessLinks | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.206.2.2.5The compliance statement for SNMP entities
that implement the PMIPV6-MIB.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6MagProxyCOAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOAType
-- object.
--
-- OBJECT pmip6MagProxyCOA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOA
-- object.
--
that implement the PMIPV6-MIB.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6MagProxyCOAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOAType
-- object.
--
-- OBJECT pmip6MagProxyCOA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOA
-- object.
--
Required groups
| mandatory | pmip6MagSystemGroup |
OID
.1.3.6.1.2.1.206.2.2.6The compliance statement for SNMP entities that
implement the PMIPV6-MIB for monitoring configuration-
related information, registration details, and
statistics on a mobile access gateway.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6MagProxyCOAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOA
-- object.
--
-- OBJECT pmip6MagProxyCOA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOAType
-- object.
--
-- OBJECT pmip6MagHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
-- OBJECT pmip6MagHomeNetworkPrefix
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
implement the PMIPV6-MIB for monitoring configuration-
related information, registration details, and
statistics on a mobile access gateway.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6MagProxyCOAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOA
-- object.
--
-- OBJECT pmip6MagProxyCOA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOAType
-- object.
--
-- OBJECT pmip6MagHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
-- OBJECT pmip6MagHomeNetworkPrefix
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
Required groups
| mandatory | pmip6MagSystemGroup | |
| mandatory | pmip6MagConfigurationGroup | |
| mandatory | pmip6MagRegistrationGroup |
OID
.1.3.6.1.2.1.206.2.2.7The compliance statement for SNMP entities
that implement the PMIPV6-MIB without support
for read-write (i.e., in read-only mode).
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6MagProxyCOAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOA
-- object.
--
-- OBJECT pmip6MagProxyCOA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOAType
-- object.
--
-- OBJECT pmip6MagHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
that implement the PMIPV6-MIB without support
for read-write (i.e., in read-only mode).
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6MagProxyCOAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOA
-- object.
--
-- OBJECT pmip6MagProxyCOA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOAType
-- object.
--
-- OBJECT pmip6MagHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
Required groups
| mandatory | pmip6MagSystemGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| pmip6MagStatus | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.206.2.2.8The compliance statement for SNMP entities that
implement the PMIPV6-MIB without support for read-
write (i.e., in read-only mode) and with support
for monitoring configuration-related information,
registration details, and statistics on a mobile
access gateway.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6MagProxyCOAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOA
-- object.
--
-- OBJECT pmip6MagProxyCOA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOAType
-- object.
--
-- OBJECT pmip6MagHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
-- OBJECT pmip6MagHomeNetworkPrefix
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
implement the PMIPV6-MIB without support for read-
write (i.e., in read-only mode) and with support
for monitoring configuration-related information,
registration details, and statistics on a mobile
access gateway.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6MagProxyCOAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOA
-- object.
--
-- OBJECT pmip6MagProxyCOA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6MagProxyCOAType
-- object.
--
-- OBJECT pmip6MagHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
-- OBJECT pmip6MagHomeNetworkPrefix
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6MagHomeNetworkPrefix object.
--
Required groups
| mandatory | pmip6MagSystemGroup | |
| mandatory | pmip6MagConfigurationGroup | |
| mandatory | pmip6MagRegistrationGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| pmip6MagStatus | readonly | Write access is not required. | |
| pmip6MagEnableMagLocalRouting | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.206.2.2.9The compliance statement for SNMP entities
that implement the PMIPV6-MIB.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6LmaLMAAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaLMAA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
that implement the PMIPV6-MIB.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6LmaLMAAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaLMAA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
Required groups
| mandatory | pmip6LmaSystemGroup |
OID
.1.3.6.1.2.1.206.2.2.10The compliance statement for SNMP entities that
implement the PMIPV6-MIB for monitoring configuration-
related information, registration details, and
statistics on a mobile access gateway.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6LmaLMAAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaLMAA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6LmaHomeNetworkPrefix object.
--
-- OBJECT pmip6LmaHomeNetworkPrefix
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6LmaHomeNetworkPrefix object.
--
implement the PMIPV6-MIB for monitoring configuration-
related information, registration details, and
statistics on a mobile access gateway.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6LmaLMAAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaLMAA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6LmaHomeNetworkPrefix object.
--
-- OBJECT pmip6LmaHomeNetworkPrefix
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6LmaHomeNetworkPrefix object.
--
Required groups
| mandatory | pmip6LmaSystemGroup | |
| mandatory | pmip6LmaConfigurationGroup |
OID
.1.3.6.1.2.1.206.2.2.11The compliance statement for SNMP entities
that implement the PMIPV6-MIB.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6LmaLMAAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaLMAA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
that implement the PMIPV6-MIB.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6LmaLMAAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaLMAA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
Required groups
| mandatory | pmip6LmaSystemGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| pmip6LmaStatus | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.206.2.2.12The compliance statement for SNMP entities that
implement the PMIPV6-MIB without support
for read-write (i.e., in read-only mode) and for
monitoring configuration-related information,
registration details, and statistics on a mobile
access gateway.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6LmaLMAAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaLMAA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6LmaHomeNetworkPrefix object.
--
-- OBJECT pmip6LmaHomeNetworkPrefix
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6LmaHomeNetworkPrefix object.
--
implement the PMIPV6-MIB without support
for read-write (i.e., in read-only mode) and for
monitoring configuration-related information,
registration details, and statistics on a mobile
access gateway.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in
SMIv2, but for which there are compliance
requirements, expressed in OBJECT clause form in
this description:
-- OBJECT pmip6LmaLMAAType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaLMAA
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the pmip6LmaLMAA
-- object.
--
-- OBJECT pmip6LmaHomeNetworkPrefixType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6LmaHomeNetworkPrefix object.
--
-- OBJECT pmip6LmaHomeNetworkPrefix
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- IPv6 addresses for the
-- pmip6LmaHomeNetworkPrefix object.
--
Required groups
| mandatory | pmip6LmaSystemGroup | |
| mandatory | pmip6LmaConfigurationGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| pmip6LmaStatus | readonly | Write access is not required. | |
| pmip6LmaMinDelayBeforeBCEDelete | readonly | Write access is not required. | |
| pmip6LmaMaxDelayBeforeNewBCEAssign | readonly | Write access is not required. | |
| pmip6LmaTimestampValidityWindow | readonly | Write access is not required. | |
| pmip6LmaHomeNetworkPrefixLifeTime | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.206.2.2.13The compliance statement for SNMP entities that
implement the PMIPV6-MIB and support notification
from the mobile access gateway.
implement the PMIPV6-MIB and support notification
from the mobile access gateway.
Required groups
| mandatory | pmip6MagNotificationGroup |
OID
.1.3.6.1.2.1.206.2.2.14The compliance statement for SNMP entities that
implement the PMIPV6-MIB and support notification
from the LMA.
implement the PMIPV6-MIB and support notification
from the LMA.
Required groups
| mandatory | pmip6LmaNotificationGroup |
Notifications / Traps (4)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.2.1.206.0.1 |
This notification is sent by the Proxy Mobile IPv6
entities every time the tunnel is established between the local mobility anchor and mobile access gateway. |
|
.1.3.6.1.2.1.206.0.2 |
This notification is sent by the Proxy Mobile IPv6
entities every time the tunnel between the local mobility anchor and mobile access gateway is released. |
|
.1.3.6.1.2.1.206.0.3 |
This notification is sent by the Proxy Mobile IPv6
entities every time the tunnel is established between the local mobility anchor and mobile access gateway. |
|
.1.3.6.1.2.1.206.0.4 |
This notification is sent by the Proxy Mobile IPv6
entities every time the tunnel between the local mobility anchor and mobile access gateway is released. |