MOBILEIPV6-MIB

        The MIB module for monitoring Mobile-IPv6
entities.
        
Copyright (C) The Internet Society 2006.  This
version of this MIB module is part of RFC 4295;
see the RFC itself for full legal notices.
    
Source file
MOBILEIPV6-MIB
Last revised
Identity
mip6MIB
Base OID
1.3.6.1.2.1.133
Imported Objects
INET-ADDRESS-MIB InetAddress InetAddressType
IP-MIB ipv6InterfaceIfIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DateAndTime TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MOBILEIPV6-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MOBILEIPV6-MIB::mip6MIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOBILEIPV6-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOBILEIPV6-MIB::mip6MIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (182)
.1.3.6.1.2.1.133
.1.3.6.1.2.1.133.0
.1.3.6.1.2.1.133.1
.1.3.6.1.2.1.133.1.1
.1.3.6.1.2.1.133.1.1.1
Bits
.1.3.6.1.2.1.133.1.1.1.1
Enumeration
.1.3.6.1.2.1.133.1.1.1.2
.1.3.6.1.2.1.133.1.1.2
.1.3.6.1.2.1.133.1.1.2.1
.1.3.6.1.2.1.133.1.1.2.1.1
.1.3.6.1.2.1.133.1.1.2.1.1.1
.1.3.6.1.2.1.133.1.1.2.1.1.10
.1.3.6.1.2.1.133.1.1.2.1.1.11
Enumeration
.1.3.6.1.2.1.133.1.1.2.1.1.12
.1.3.6.1.2.1.133.1.1.2.1.1.2
.1.3.6.1.2.1.133.1.1.2.1.1.3
.1.3.6.1.2.1.133.1.1.2.1.1.4
.1.3.6.1.2.1.133.1.1.2.1.1.5
.1.3.6.1.2.1.133.1.1.2.1.1.6
.1.3.6.1.2.1.133.1.1.2.1.1.7
.1.3.6.1.2.1.133.1.1.2.1.1.8
Unsigned32
.1.3.6.1.2.1.133.1.1.2.1.1.9
.1.3.6.1.2.1.133.1.1.2.2
.1.3.6.1.2.1.133.1.1.2.2.1
.1.3.6.1.2.1.133.1.1.2.2.1.1
.1.3.6.1.2.1.133.1.1.2.2.1.10
.1.3.6.1.2.1.133.1.1.2.2.1.2
Unsigned32
.1.3.6.1.2.1.133.1.1.2.2.1.3
.1.3.6.1.2.1.133.1.1.2.2.1.4
.1.3.6.1.2.1.133.1.1.2.2.1.5
.1.3.6.1.2.1.133.1.1.2.2.1.6
.1.3.6.1.2.1.133.1.1.2.2.1.7
.1.3.6.1.2.1.133.1.1.2.2.1.8
.1.3.6.1.2.1.133.1.1.2.2.1.9
.1.3.6.1.2.1.133.1.1.3
.1.3.6.1.2.1.133.1.1.3.1
.1.3.6.1.2.1.133.1.1.3.1.1
.1.3.6.1.2.1.133.1.1.3.1.2
.1.3.6.1.2.1.133.1.1.3.1.3
.1.3.6.1.2.1.133.1.1.3.1.4
.1.3.6.1.2.1.133.1.1.3.1.5
.1.3.6.1.2.1.133.1.1.3.1.6
.1.3.6.1.2.1.133.1.1.3.1.7
.1.3.6.1.2.1.133.1.1.3.1.8
.1.3.6.1.2.1.133.1.1.3.1.9
.1.3.6.1.2.1.133.1.1.3.2
.1.3.6.1.2.1.133.1.1.3.2.1
.1.3.6.1.2.1.133.1.1.3.2.1.1
.1.3.6.1.2.1.133.1.1.3.2.1.2
.1.3.6.1.2.1.133.1.1.3.2.1.3
.1.3.6.1.2.1.133.1.1.3.2.1.4
.1.3.6.1.2.1.133.1.1.3.2.1.5
.1.3.6.1.2.1.133.1.1.3.2.1.6
.1.3.6.1.2.1.133.1.1.3.2.1.7
.1.3.6.1.2.1.133.1.1.3.2.1.8
.1.3.6.1.2.1.133.1.1.3.2.1.9
.1.3.6.1.2.1.133.1.2
.1.3.6.1.2.1.133.1.2.1
.1.3.6.1.2.1.133.1.2.1.1
.1.3.6.1.2.1.133.1.2.1.1.1
.1.3.6.1.2.1.133.1.2.1.1.1.1
.1.3.6.1.2.1.133.1.2.1.1.1.2
Enumeration
.1.3.6.1.2.1.133.1.2.1.1.1.3
.1.3.6.1.2.1.133.1.2.2
.1.3.6.1.2.1.133.1.2.2.1
.1.3.6.1.2.1.133.1.2.2.2
.1.3.6.1.2.1.133.1.2.2.3
.1.3.6.1.2.1.133.1.2.2.4
.1.3.6.1.2.1.133.1.2.2.5
.1.3.6.1.2.1.133.1.2.2.6
.1.3.6.1.2.1.133.1.2.2.7
.1.3.6.1.2.1.133.1.2.2.8
.1.3.6.1.2.1.133.1.2.3
.1.3.6.1.2.1.133.1.2.3.1
.1.3.6.1.2.1.133.1.2.3.1.1
.1.3.6.1.2.1.133.1.2.3.1.1.1
.1.3.6.1.2.1.133.1.2.3.1.1.10
.1.3.6.1.2.1.133.1.2.3.1.1.11
.1.3.6.1.2.1.133.1.2.3.1.1.12
.1.3.6.1.2.1.133.1.2.3.1.1.2
.1.3.6.1.2.1.133.1.2.3.1.1.3
.1.3.6.1.2.1.133.1.2.3.1.1.4
.1.3.6.1.2.1.133.1.2.3.1.1.5
.1.3.6.1.2.1.133.1.2.3.1.1.6
Unsigned32
.1.3.6.1.2.1.133.1.2.3.1.1.7
.1.3.6.1.2.1.133.1.2.3.1.1.8
.1.3.6.1.2.1.133.1.2.3.1.1.9
.1.3.6.1.2.1.133.1.2.3.2
.1.3.6.1.2.1.133.1.2.3.2.1
.1.3.6.1.2.1.133.1.2.3.2.2
.1.3.6.1.2.1.133.1.2.3.2.3
.1.3.6.1.2.1.133.1.2.3.2.4
.1.3.6.1.2.1.133.1.2.3.2.5
.1.3.6.1.2.1.133.1.2.3.2.6
.1.3.6.1.2.1.133.1.2.3.2.7
.1.3.6.1.2.1.133.1.2.3.2.8
.1.3.6.1.2.1.133.1.2.3.2.9
.1.3.6.1.2.1.133.1.3
.1.3.6.1.2.1.133.1.3.1
.1.3.6.1.2.1.133.1.3.2
.1.3.6.1.2.1.133.1.3.2.1
.1.3.6.1.2.1.133.1.3.2.1.1
.1.3.6.1.2.1.133.1.3.2.1.10
.1.3.6.1.2.1.133.1.3.2.1.11
.1.3.6.1.2.1.133.1.3.2.1.12
.1.3.6.1.2.1.133.1.3.2.1.13
.1.3.6.1.2.1.133.1.3.2.1.14
.1.3.6.1.2.1.133.1.3.2.1.15
.1.3.6.1.2.1.133.1.3.2.1.16
.1.3.6.1.2.1.133.1.3.2.1.17
.1.3.6.1.2.1.133.1.3.2.1.18
.1.3.6.1.2.1.133.1.3.2.1.2
.1.3.6.1.2.1.133.1.3.2.1.3
.1.3.6.1.2.1.133.1.3.2.1.4
.1.3.6.1.2.1.133.1.3.2.1.5
.1.3.6.1.2.1.133.1.3.2.1.6
.1.3.6.1.2.1.133.1.3.2.1.7
.1.3.6.1.2.1.133.1.3.2.1.8
.1.3.6.1.2.1.133.1.3.2.1.9
.1.3.6.1.2.1.133.1.3.2.2
.1.3.6.1.2.1.133.1.3.2.2.1
.1.3.6.1.2.1.133.1.3.2.2.1.1
.1.3.6.1.2.1.133.1.3.2.2.1.2
.1.3.6.1.2.1.133.1.3.2.2.1.3
.1.3.6.1.2.1.133.1.3.2.2.1.4
.1.3.6.1.2.1.133.1.3.2.2.1.5
.1.3.6.1.2.1.133.1.3.2.2.1.6
.1.3.6.1.2.1.133.1.3.2.2.1.7
.1.3.6.1.2.1.133.1.4
.1.3.6.1.2.1.133.1.4.1
.1.3.6.1.2.1.133.1.4.1.1
.1.3.6.1.2.1.133.1.4.1.2
.1.3.6.1.2.1.133.1.4.1.3
.1.3.6.1.2.1.133.1.4.1.3.1
Integer32
.1.3.6.1.2.1.133.1.4.1.3.1.1
secondsInteger32
.1.3.6.1.2.1.133.1.4.1.3.1.2
Enumeration
.1.3.6.1.2.1.133.1.4.1.3.1.3
Enumeration
.1.3.6.1.2.1.133.1.4.1.3.1.4
Enumeration
.1.3.6.1.2.1.133.1.4.1.3.1.5
.1.3.6.1.2.1.133.1.4.1.4
.1.3.6.1.2.1.133.1.4.1.4.1
.1.3.6.1.2.1.133.1.4.1.4.1.1
.1.3.6.1.2.1.133.1.4.1.4.1.2
.1.3.6.1.2.1.133.1.4.1.4.1.3
.1.3.6.1.2.1.133.1.4.1.4.1.4
.1.3.6.1.2.1.133.1.4.1.4.1.5
.1.3.6.1.2.1.133.1.4.1.5
.1.3.6.1.2.1.133.1.4.1.5.1
Integer32
.1.3.6.1.2.1.133.1.4.1.5.1.1
.1.3.6.1.2.1.133.1.4.1.5.1.2
.1.3.6.1.2.1.133.1.4.1.5.1.3
.1.3.6.1.2.1.133.1.4.2
.1.3.6.1.2.1.133.1.4.2.1
.1.3.6.1.2.1.133.1.4.2.1.1
.1.3.6.1.2.1.133.1.4.2.1.10
.1.3.6.1.2.1.133.1.4.2.1.11
.1.3.6.1.2.1.133.1.4.2.1.12
.1.3.6.1.2.1.133.1.4.2.1.13
.1.3.6.1.2.1.133.1.4.2.1.14
.1.3.6.1.2.1.133.1.4.2.1.15
.1.3.6.1.2.1.133.1.4.2.1.16
.1.3.6.1.2.1.133.1.4.2.1.17
.1.3.6.1.2.1.133.1.4.2.1.2
.1.3.6.1.2.1.133.1.4.2.1.3
.1.3.6.1.2.1.133.1.4.2.1.4
.1.3.6.1.2.1.133.1.4.2.1.5
.1.3.6.1.2.1.133.1.4.2.1.6
.1.3.6.1.2.1.133.1.4.2.1.7
.1.3.6.1.2.1.133.1.4.2.1.8
.1.3.6.1.2.1.133.1.4.2.1.9
.1.3.6.1.2.1.133.1.4.2.2
.1.3.6.1.2.1.133.1.4.2.2.1
.1.3.6.1.2.1.133.1.4.2.2.1.1
.1.3.6.1.2.1.133.1.4.2.2.1.2
.1.3.6.1.2.1.133.1.4.2.2.1.3
.1.3.6.1.2.1.133.1.4.2.2.1.4
.1.3.6.1.2.1.133.1.4.2.2.1.5
.1.3.6.1.2.1.133.1.4.2.2.1.6
.1.3.6.1.2.1.133.1.4.2.2.1.7
.1.3.6.1.2.1.133.2
.1.3.6.1.2.1.133.2.1
.1.3.6.1.2.1.133.2.2
Dependencies (8) 5 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. INET-ADDRESS-MIBrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. IP-MIBrfc
  9. MOBILEIPV6-MIBrfcselected
Type Definitions (1)
Enumeration
reasonUnspecified(1)
admProhibited(2)
insufficientResource(3)
homeRegistrationNotSupported(4)
notHomeSubnet(5)
notHomeAgentForThisMobileNode(6)
duplicateAddressDetectionFailed(7)
sequenceNumberOutOfWindow(8)
expiredHomeNonceIndex(9)
expiredCareofNonceIndex(10)
expiredNonces(11)
registrationTypeChangeDisallowed(12)
Conformance Groups (16)
A collection of objects for basic MIPv6
monitoring.
.1.3.6.1.2.1.133.2.1.1
A collection of objects for monitoring the
Binding Cache.
.1.3.6.1.2.1.133.2.1.2
A collection of objects for monitoring the
Binding History. This can be used to monitor
the movement of the mobile node.
.1.3.6.1.2.1.133.2.1.3
A collection of objects for monitoring the
total MIPv6 traffic.
.1.3.6.1.2.1.133.2.1.4
A collection of objects for monitoring the
MIPv6 traffic due to a mobile node.
.1.3.6.1.2.1.133.2.1.5
A collection of objects for basic monitoring
of the mobile node.
.1.3.6.1.2.1.133.2.1.6
A collection of objects for monitoring
the advertisement-related info on the
mobile node.
.1.3.6.1.2.1.133.2.1.7
A collection of objects for monitoring
the registration statistics for the mobile node.
.1.3.6.1.2.1.133.2.1.8
A collection of objects for monitoring
the control messages and corresponding
statistics for each mobile node
communicating with the correspondent
node.
.1.3.6.1.2.1.133.2.1.9
A collection of objects for monitoring
the advertisement-related parameters and
statistics for the home agent.
.1.3.6.1.2.1.133.2.1.10
A collection of objects for monitoring
the Home Agent List on the home agent.
.1.3.6.1.2.1.133.2.1.11
A collection of objects for monitoring
registration-related statistics on the home agent.
.1.3.6.1.2.1.133.2.1.12
A collection of objects for monitoring
advertisement and registration statistics on
a correspondent node.
.1.3.6.1.2.1.133.2.1.13
A collection of objects for monitoring
advertisement and registration statistics on
a home agent.
.1.3.6.1.2.1.133.2.1.14
A collection of objects for controlling the
Binding Cache.
.1.3.6.1.2.1.133.2.1.15
A collection of notifications from a home agent
or correspondent node to the Manager about the
status of a mobile node.
.1.3.6.1.2.1.133.2.1.16
Compliance Statements (17)

OID .1.3.6.1.2.1.133.2.2.1
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB.
Required groups

OID .1.3.6.1.2.1.133.2.2.2
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB and support
monitoring of the Binding Cache and the Total
Traffic.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
Required groups

OID .1.3.6.1.2.1.133.2.2.3
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB and
support monitoring of the Binding Cache,
the Binding History, the total traffic, and
the mobile node-wide traffic.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHstHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the
-- mip6BindingHstHomeAddress object.
--
-- OBJECT mip6BindingHstHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the
-- mip6BindingHstHomeAddress object.
--
Required groups

OID .1.3.6.1.2.1.133.2.2.4
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB without support
for read-write (i.e., in read-only mode).
Required groups
Object refinements
ObjectAccessSyntaxDescription
mip6Status readonly
Write access is not required.

OID .1.3.6.1.2.1.133.2.2.5
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB without support
for read-write (i.e., in read-only mode) and
support monitoring of the Binding Cache and Total
Traffic.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
Required groups
Object refinements
ObjectAccessSyntaxDescription
mip6Status readonly
Write access is not required.
mip6BindingAdminStatus readonly
Write access is not required.

OID .1.3.6.1.2.1.133.2.2.6
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB without support
for read-write (i.e., in read-only mode) and support
monitoring of the Binding Cache, the Binding History,
the total traffic, and the mobile node-wide traffic.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHstHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the
-- mip6BindingHstHomeAddress object.
--

-- OBJECT mip6BindingHstHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the
-- mip6BindingHstHomeAddress object.
--
Required groups
Object refinements
ObjectAccessSyntaxDescription
mip6Status readonly
Write access is not required.
mip6BindingAdminStatus readonly
Write access is not required.

OID .1.3.6.1.2.1.133.2.2.7
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB and
support monitoring of the basic mobile node
functionality.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT clause form in this description:
-- OBJECT mip6MnHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6MnHomeAddress
-- object.
--
-- OBJECT mip6MnHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global

-- ipv6 addresses for the mip6MnHomeAddress
-- object.
--
Required groups

OID .1.3.6.1.2.1.133.2.2.8
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB and
support monitoring of the mobile node
functionality specifically the Discovery- and
Registration-related statistics,
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT clause form in this description:
-- OBJECT mip6MnHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6MnHomeAddress
-- object.
--
-- OBJECT mip6MnHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6MnHomeAddress
-- object.
--
-- OBJECT mip6MnBLNodeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6MnBLNodeAddress
-- object.
--
-- OBJECT mip6MnBLNodeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6MnBLNodeAddress
-- object.

--
Required groups

OID .1.3.6.1.2.1.133.2.2.9
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB and
support monitoring of the basic correspondent node
functionality.
Required groups

OID .1.3.6.1.2.1.133.2.2.10
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB and
support monitoring of the basic correspondent node
functionality.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
Required groups

OID .1.3.6.1.2.1.133.2.2.11
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB and
support monitoring of the basic home agent
functionality.
Required groups

OID .1.3.6.1.2.1.133.2.2.12
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB and
support monitoring of the home agent
functionality specifically the Home Agent List
and the home-agent-registration-related statistics,
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6HaLinkLocalAddressType

-- SYNTAX InetAddressType { ipv6z(4) }
-- DESCRIPTION
-- This MIB module requires support for local
-- ipv6 addresses for the mip6HaLinkLocalAddress
-- object.
--
-- OBJECT mip6HaLinkLocalAddress
-- SYNTAX InetAddress (SIZE(20))
-- DESCRIPTION
-- This MIB module requires support for local
-- ipv6 addresses for the mip6HaLinkLocalAddress
-- object.
--
Required groups

OID .1.3.6.1.2.1.133.2.2.13
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB and
support monitoring and control of the home agent
functionality specifically the Home Agent List
and the home-agent-registration-related statistics,
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress

-- object.
--
-- OBJECT mip6HaLinkLocalAddressType
-- SYNTAX InetAddressType { ipv6z(4) }
-- DESCRIPTION
-- This MIB module requires support for local
-- ipv6 addresses for the mip6HaLinkLocalAddress
-- object.
--
-- OBJECT mip6HaLinkLocalAddress
-- SYNTAX InetAddress (SIZE(20))
-- DESCRIPTION
-- This MIB module requires support for local
-- ipv6 addresses for the mip6HaLinkLocalAddress
-- object.
--
Required groups

OID .1.3.6.1.2.1.133.2.2.14
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB without support
for read-write (i.e., in read-only mode) and
support monitoring of the basic home agent
functionality.
Required groups
Object refinements
ObjectAccessSyntaxDescription
mip6HaAdvPreference readonly
Write access is not required.
mip6HaAdvLifetime readonly
Write access is not required.
mip6HaPrefixAdv readonly
Write access is not required.
mip6HaPrefixSolicitation readonly
Write access is not required.
mip6HaMCastCtlMsgSupport readonly
Write access is not required.

OID .1.3.6.1.2.1.133.2.2.15
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB without support
for read-write (i.e., in read-only mode) and
support monitoring of the home agent
functionality specifically the Home Agent List
and the home-agent-registration-related statistics.

There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6HaLinkLocalAddressType
-- SYNTAX InetAddressType { ipv6z(4) }
-- DESCRIPTION
-- This MIB module requires support for local
-- ipv6 addresses for the mip6HaLinkLocalAddress
-- object.
--
-- OBJECT mip6HaLinkLocalAddress
-- SYNTAX InetAddress (SIZE(20))
-- DESCRIPTION
-- This MIB module requires support for local
-- ipv6 addresses for the mip6HaLinkLocalAddress
-- object.
--
Required groups
Object refinements
ObjectAccessSyntaxDescription
mip6HaAdvPreference readonly
Write access is not required.
mip6HaAdvLifetime readonly
Write access is not required.
mip6HaPrefixAdv readonly
Write access is not required.
mip6HaPrefixSolicitation readonly
Write access is not required.
mip6HaMCastCtlMsgSupport readonly
Write access is not required.

OID .1.3.6.1.2.1.133.2.2.16
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB without support
for read-write (i.e., in read-only mode) and
support monitoring and control of the home agent
functionality specifically the Home Agent List
and the home-agent-registration-related statistics,
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT clause form in this description:
-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6HaLinkLocalAddressType
-- SYNTAX InetAddressType { ipv6z(4) }
-- DESCRIPTION
-- This MIB module requires support for local
-- ipv6 addresses for the mip6HaLinkLocalAddress
-- object.
--
-- OBJECT mip6HaLinkLocalAddress
-- SYNTAX InetAddress (SIZE(20))
-- DESCRIPTION
-- This MIB module requires support for local
-- ipv6 addresses for the mip6HaLinkLocalAddress
-- object.
--
Required groups
Object refinements
ObjectAccessSyntaxDescription
mip6HaAdvPreference readonly
Write access is not required.
mip6HaAdvLifetime readonly
Write access is not required.
mip6HaPrefixAdv readonly
Write access is not required.
mip6HaPrefixSolicitation readonly
Write access is not required.
mip6HaMCastCtlMsgSupport readonly
Write access is not required.
mip6BindingAdminStatus readonly
Write access is not required.

OID .1.3.6.1.2.1.133.2.2.17
The compliance statement for SNMP entities
that implement the MOBILEIPV6-MIB and
support Notification from home agent or
correspondent node to management stations
about the mobile node status.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2,
but for which there are compliance requirements,
expressed in OBJECT clause form in this description:

-- OBJECT mip6BindingHomeAddressType
-- SYNTAX InetAddressType { ipv6(2) }
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
--
-- OBJECT mip6BindingHomeAddress
-- SYNTAX InetAddress (SIZE(16))
-- DESCRIPTION
-- This MIB module requires support for global
-- ipv6 addresses for the mip6BindingHomeAddress
-- object.
Required groups
Notifications / Traps (5)
NameOIDDescription
.1.3.6.1.2.1.133.0.1
This notification is sent by a home agent when
a mobile node registers with the home agent
for the first time.
Notifications will not be sent for subsequent
updates and/or refreshes.
The MO instances in the notifications will be
identified by the mip6BindingHomeAddressType
and mip6BindingHomeAddress for the mobile node
in the mip6BindingCacheTable.
.1.3.6.1.2.1.133.0.2
This notification is sent by a home agent every
time a mobile node de-registers with the home
agent by sending a Binding Update that requests
the home agent to delete a binding.
The MO instances in the notifications will be
identified by the mip6BindingHomeAddressType
and mip6BindingHomeAddress for the mobile node
in the mip6BindingCacheTable.
.1.3.6.1.2.1.133.0.3
This notification is sent by a home agent every
time a mobile node sends a Binding Update with
a new care-of address (for an existing Binding
Cache entry).
Notifications will not be sent for subsequent
updates and/or refreshes for the same Care-of
address.
The registration of a new care-of address may
indicate that the mobile node has moved or that
the primary care-of address of the mobile node
has become deprecated.
The MO instances in the notifications will be
identified by the mip6BindingHomeAddressType
and mip6BindingHomeAddress for the mobile node
in the mip6BindingCacheTable.
.1.3.6.1.2.1.133.0.4
This notification is sent by a home agent when a
binding for the mobile node at the home agent
expired (no timely Binding Updates were received).
The MO instances in the notifications will be
identified by the mip6BindingHomeAddressType
and mip6BindingHomeAddress for the mobile node
in the mip6BindingCacheTable.
.1.3.6.1.2.1.133.0.5
This notification is sent by a correspondent node
when a binding for the mobile node at the
correspondent node expired (no timely Binding
Updates were received).
The MO instances in the notifications will be
identified by the mip6BindingHomeAddressType
and mip6BindingHomeAddress for the mobile node
in the mip6BindingCacheTable.