IP-MIB
Monitored by Observium The MIB module for managing IP and ICMP implementations, but
excluding their management of IP routes.
Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC 4293; see the RFC itself for
full legal notices.
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Discovery
IP addresses
Network statistics
Ports
Explore Observium network monitoring
- Source file
IP-MIB- Last revised
- Identity
ipMIB- Base OID
1.3.6.1.2.1.48
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType InetVersion InetZoneIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 zeroDotZero |
| SNMPv2-TC | PhysAddress RowPointer RowStatus StorageType TestAndIncr TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IP-MIB::ipMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IP-MIB::ipMIB'
Objects (267)
66 directly used by Observium
Showing 267 of 267 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.4 |
||
|
|
Enumeration
|
.1.3.6.1.2.1.4.1 |
|
|
.1.3.6.1.2.1.4.10 |
|
|
|
.1.3.6.1.2.1.4.11 |
|
|
|
.1.3.6.1.2.1.4.12 |
|
|
secondsSNMPv2-SMIInteger32
|
.1.3.6.1.2.1.4.13 |
|
|
|
.1.3.6.1.2.1.4.14 |
|
|
|
.1.3.6.1.2.1.4.15 |
|
|
|
.1.3.6.1.2.1.4.16 |
|
|
|
.1.3.6.1.2.1.4.17 |
|
|
|
.1.3.6.1.2.1.4.18 |
|
|
|
.1.3.6.1.2.1.4.19 |
|
|
|
Integer32
|
.1.3.6.1.2.1.4.2 |
|
|
.1.3.6.1.2.1.4.20 |
|
|
|
.1.3.6.1.2.1.4.20.1 |
|
|
|
.1.3.6.1.2.1.4.20.1.1 |
|
|
|
Integer32
|
.1.3.6.1.2.1.4.20.1.2 |
|
|
.1.3.6.1.2.1.4.20.1.3 |
|
|
|
Integer32
|
.1.3.6.1.2.1.4.20.1.4 |
|
|
Integer32
|
.1.3.6.1.2.1.4.20.1.5 |
|
|
.1.3.6.1.2.1.4.22 |
|
|
|
.1.3.6.1.2.1.4.22.1 |
|
|
|
Integer32
|
.1.3.6.1.2.1.4.22.1.1 |
|
|
OctetString
|
.1.3.6.1.2.1.4.22.1.2 |
|
|
.1.3.6.1.2.1.4.22.1.3 |
|
|
|
Enumeration
|
.1.3.6.1.2.1.4.22.1.4 |
|
|
.1.3.6.1.2.1.4.23 |
|
|
|
Enumeration
|
.1.3.6.1.2.1.4.25 |
|
Integer32
|
.1.3.6.1.2.1.4.26 |
|
.1.3.6.1.2.1.4.27 |
||
.1.3.6.1.2.1.4.28 |
||
.1.3.6.1.2.1.4.28.1 |
||
.1.3.6.1.2.1.4.28.1.1 |
||
|
Integer32
|
.1.3.6.1.2.1.4.28.1.2 |
|
|
Enumeration
|
.1.3.6.1.2.1.4.28.1.3 |
|
|
millisecondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.4.28.1.4 |
|
.1.3.6.1.2.1.4.29 |
||
|
|
.1.3.6.1.2.1.4.3 |
|
.1.3.6.1.2.1.4.30 |
||
.1.3.6.1.2.1.4.30.1 |
||
.1.3.6.1.2.1.4.30.1.1 |
||
|
octetsUnsigned32
|
.1.3.6.1.2.1.4.30.1.2 |
|
.1.3.6.1.2.1.4.30.1.3 |
||
|
Enumeration
|
.1.3.6.1.2.1.4.30.1.5 |
|
|
millisecondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.4.30.1.6 |
|
|
millisecondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.4.30.1.7 |
|
|
Enumeration
|
.1.3.6.1.2.1.4.30.1.8 |
|
.1.3.6.1.2.1.4.31 |
||
.1.3.6.1.2.1.4.31.1 |
||
.1.3.6.1.2.1.4.31.1.1 |
||
.1.3.6.1.2.1.4.31.1.1.1 |
||
.1.3.6.1.2.1.4.31.1.1.10 |
||
.1.3.6.1.2.1.4.31.1.1.11 |
||
.1.3.6.1.2.1.4.31.1.1.12 |
||
.1.3.6.1.2.1.4.31.1.1.13 |
||
|
|
.1.3.6.1.2.1.4.31.1.1.14 |
|
|
|
.1.3.6.1.2.1.4.31.1.1.15 |
|
|
|
.1.3.6.1.2.1.4.31.1.1.16 |
|
|
|
.1.3.6.1.2.1.4.31.1.1.17 |
|
|
|
.1.3.6.1.2.1.4.31.1.1.18 |
|
.1.3.6.1.2.1.4.31.1.1.19 |
||
|
|
.1.3.6.1.2.1.4.31.1.1.20 |
|
.1.3.6.1.2.1.4.31.1.1.21 |
||
|
|
.1.3.6.1.2.1.4.31.1.1.22 |
|
.1.3.6.1.2.1.4.31.1.1.23 |
||
.1.3.6.1.2.1.4.31.1.1.24 |
||
|
|
.1.3.6.1.2.1.4.31.1.1.25 |
|
.1.3.6.1.2.1.4.31.1.1.26 |
||
.1.3.6.1.2.1.4.31.1.1.27 |
||
.1.3.6.1.2.1.4.31.1.1.28 |
||
.1.3.6.1.2.1.4.31.1.1.29 |
||
|
|
.1.3.6.1.2.1.4.31.1.1.3 |
|
.1.3.6.1.2.1.4.31.1.1.30 |
||
.1.3.6.1.2.1.4.31.1.1.31 |
||
.1.3.6.1.2.1.4.31.1.1.32 |
||
.1.3.6.1.2.1.4.31.1.1.33 |
||
.1.3.6.1.2.1.4.31.1.1.34 |
||
.1.3.6.1.2.1.4.31.1.1.35 |
||
.1.3.6.1.2.1.4.31.1.1.36 |
||
.1.3.6.1.2.1.4.31.1.1.37 |
||
.1.3.6.1.2.1.4.31.1.1.38 |
||
.1.3.6.1.2.1.4.31.1.1.39 |
||
.1.3.6.1.2.1.4.31.1.1.4 |
||
.1.3.6.1.2.1.4.31.1.1.40 |
||
.1.3.6.1.2.1.4.31.1.1.41 |
||
.1.3.6.1.2.1.4.31.1.1.42 |
||
.1.3.6.1.2.1.4.31.1.1.43 |
||
.1.3.6.1.2.1.4.31.1.1.44 |
||
.1.3.6.1.2.1.4.31.1.1.45 |
||
.1.3.6.1.2.1.4.31.1.1.46 |
||
|
milli-secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.4.31.1.1.47 |
|
.1.3.6.1.2.1.4.31.1.1.5 |
||
.1.3.6.1.2.1.4.31.1.1.6 |
||
|
|
.1.3.6.1.2.1.4.31.1.1.7 |
|
.1.3.6.1.2.1.4.31.1.1.8 |
||
.1.3.6.1.2.1.4.31.1.1.9 |
||
.1.3.6.1.2.1.4.31.2 |
||
.1.3.6.1.2.1.4.31.3 |
||
.1.3.6.1.2.1.4.31.3.1 |
||
.1.3.6.1.2.1.4.31.3.1.1 |
||
.1.3.6.1.2.1.4.31.3.1.10 |
||
.1.3.6.1.2.1.4.31.3.1.11 |
||
.1.3.6.1.2.1.4.31.3.1.12 |
||
.1.3.6.1.2.1.4.31.3.1.13 |
||
.1.3.6.1.2.1.4.31.3.1.14 |
||
.1.3.6.1.2.1.4.31.3.1.15 |
||
.1.3.6.1.2.1.4.31.3.1.16 |
||
.1.3.6.1.2.1.4.31.3.1.17 |
||
.1.3.6.1.2.1.4.31.3.1.18 |
||
.1.3.6.1.2.1.4.31.3.1.19 |
||
.1.3.6.1.2.1.4.31.3.1.2 |
||
.1.3.6.1.2.1.4.31.3.1.20 |
||
.1.3.6.1.2.1.4.31.3.1.21 |
||
.1.3.6.1.2.1.4.31.3.1.23 |
||
.1.3.6.1.2.1.4.31.3.1.24 |
||
.1.3.6.1.2.1.4.31.3.1.25 |
||
.1.3.6.1.2.1.4.31.3.1.26 |
||
.1.3.6.1.2.1.4.31.3.1.27 |
||
.1.3.6.1.2.1.4.31.3.1.28 |
||
.1.3.6.1.2.1.4.31.3.1.29 |
||
.1.3.6.1.2.1.4.31.3.1.3 |
||
.1.3.6.1.2.1.4.31.3.1.30 |
||
.1.3.6.1.2.1.4.31.3.1.31 |
||
.1.3.6.1.2.1.4.31.3.1.32 |
||
|
|
.1.3.6.1.2.1.4.31.3.1.33 |
|
.1.3.6.1.2.1.4.31.3.1.34 |
||
.1.3.6.1.2.1.4.31.3.1.35 |
||
.1.3.6.1.2.1.4.31.3.1.36 |
||
.1.3.6.1.2.1.4.31.3.1.37 |
||
.1.3.6.1.2.1.4.31.3.1.38 |
||
.1.3.6.1.2.1.4.31.3.1.39 |
||
.1.3.6.1.2.1.4.31.3.1.4 |
||
.1.3.6.1.2.1.4.31.3.1.40 |
||
.1.3.6.1.2.1.4.31.3.1.41 |
||
.1.3.6.1.2.1.4.31.3.1.42 |
||
.1.3.6.1.2.1.4.31.3.1.43 |
||
.1.3.6.1.2.1.4.31.3.1.44 |
||
.1.3.6.1.2.1.4.31.3.1.45 |
||
.1.3.6.1.2.1.4.31.3.1.46 |
||
|
milli-secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.4.31.3.1.47 |
|
.1.3.6.1.2.1.4.31.3.1.5 |
||
|
|
.1.3.6.1.2.1.4.31.3.1.6 |
|
.1.3.6.1.2.1.4.31.3.1.7 |
||
.1.3.6.1.2.1.4.31.3.1.8 |
||
.1.3.6.1.2.1.4.31.3.1.9 |
||
.1.3.6.1.2.1.4.32 |
||
.1.3.6.1.2.1.4.32.1 |
||
.1.3.6.1.2.1.4.32.1.1 |
||
.1.3.6.1.2.1.4.32.1.2 |
||
.1.3.6.1.2.1.4.32.1.3 |
||
.1.3.6.1.2.1.4.32.1.4 |
||
.1.3.6.1.2.1.4.32.1.5 |
||
.1.3.6.1.2.1.4.32.1.6 |
||
.1.3.6.1.2.1.4.32.1.7 |
||
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.4.32.1.8 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.4.32.1.9 |
|
.1.3.6.1.2.1.4.33 |
||
.1.3.6.1.2.1.4.34 |
||
.1.3.6.1.2.1.4.34.1 |
||
.1.3.6.1.2.1.4.34.1.1 |
||
.1.3.6.1.2.1.4.34.1.10 |
||
.1.3.6.1.2.1.4.34.1.11 |
||
.1.3.6.1.2.1.4.34.1.2 |
||
|
|
.1.3.6.1.2.1.4.34.1.3 |
|
|
|
Enumeration
|
.1.3.6.1.2.1.4.34.1.4 |
.1.3.6.1.2.1.4.34.1.5 |
||
.1.3.6.1.2.1.4.34.1.6 |
||
|
|
.1.3.6.1.2.1.4.34.1.7 |
|
.1.3.6.1.2.1.4.34.1.8 |
||
.1.3.6.1.2.1.4.34.1.9 |
||
.1.3.6.1.2.1.4.35 |
||
.1.3.6.1.2.1.4.35.1 |
||
.1.3.6.1.2.1.4.35.1.1 |
||
.1.3.6.1.2.1.4.35.1.2 |
||
.1.3.6.1.2.1.4.35.1.3 |
||
|
|
OctetString
|
.1.3.6.1.2.1.4.35.1.4 |
.1.3.6.1.2.1.4.35.1.5 |
||
|
Enumeration
|
.1.3.6.1.2.1.4.35.1.6 |
|
|
Enumeration
|
.1.3.6.1.2.1.4.35.1.7 |
|
.1.3.6.1.2.1.4.35.1.8 |
||
.1.3.6.1.2.1.4.36 |
||
.1.3.6.1.2.1.4.36.1 |
||
.1.3.6.1.2.1.4.36.1.1 |
||
.1.3.6.1.2.1.4.36.1.10 |
||
.1.3.6.1.2.1.4.36.1.11 |
||
.1.3.6.1.2.1.4.36.1.12 |
||
.1.3.6.1.2.1.4.36.1.13 |
||
.1.3.6.1.2.1.4.36.1.2 |
||
.1.3.6.1.2.1.4.36.1.3 |
||
.1.3.6.1.2.1.4.36.1.4 |
||
.1.3.6.1.2.1.4.36.1.5 |
||
.1.3.6.1.2.1.4.36.1.6 |
||
.1.3.6.1.2.1.4.36.1.7 |
||
.1.3.6.1.2.1.4.36.1.8 |
||
.1.3.6.1.2.1.4.36.1.9 |
||
.1.3.6.1.2.1.4.37 |
||
.1.3.6.1.2.1.4.37.1 |
||
.1.3.6.1.2.1.4.37.1.1 |
||
.1.3.6.1.2.1.4.37.1.2 |
||
.1.3.6.1.2.1.4.37.1.3 |
||
|
secondsUnsigned32
|
.1.3.6.1.2.1.4.37.1.4 |
|
|
Enumeration
|
.1.3.6.1.2.1.4.37.1.5 |
|
.1.3.6.1.2.1.4.38 |
||
.1.3.6.1.2.1.4.39 |
||
.1.3.6.1.2.1.4.39.1 |
||
.1.3.6.1.2.1.4.39.1.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.4.39.1.10 |
|
|
secondsUnsigned32
|
.1.3.6.1.2.1.4.39.1.11 |
|
.1.3.6.1.2.1.4.39.1.12 |
||
.1.3.6.1.2.1.4.39.1.2 |
||
|
secondsUnsigned32
|
.1.3.6.1.2.1.4.39.1.3 |
|
|
secondsUnsigned32
|
.1.3.6.1.2.1.4.39.1.4 |
|
.1.3.6.1.2.1.4.39.1.5 |
||
.1.3.6.1.2.1.4.39.1.6 |
||
.1.3.6.1.2.1.4.39.1.7 |
||
|
millisecondsUnsigned32
|
.1.3.6.1.2.1.4.39.1.8 |
|
|
millisecondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.4.39.1.9 |
|
|
|
.1.3.6.1.2.1.4.4 |
|
|
|
.1.3.6.1.2.1.4.5 |
|
|
|
.1.3.6.1.2.1.4.6 |
|
|
|
.1.3.6.1.2.1.4.7 |
|
|
|
.1.3.6.1.2.1.4.8 |
|
|
|
.1.3.6.1.2.1.4.9 |
|
.1.3.6.1.2.1.48 |
||
.1.3.6.1.2.1.48.2 |
||
.1.3.6.1.2.1.48.2.1 |
||
.1.3.6.1.2.1.48.2.2 |
||
.1.3.6.1.2.1.5 |
||
|
|
.1.3.6.1.2.1.5.1 |
|
|
|
.1.3.6.1.2.1.5.10 |
|
|
|
.1.3.6.1.2.1.5.11 |
|
|
|
.1.3.6.1.2.1.5.12 |
|
|
|
.1.3.6.1.2.1.5.13 |
|
|
|
.1.3.6.1.2.1.5.14 |
|
|
|
.1.3.6.1.2.1.5.15 |
|
|
|
.1.3.6.1.2.1.5.16 |
|
|
|
.1.3.6.1.2.1.5.17 |
|
|
|
.1.3.6.1.2.1.5.18 |
|
|
|
.1.3.6.1.2.1.5.19 |
|
|
|
.1.3.6.1.2.1.5.2 |
|
|
|
.1.3.6.1.2.1.5.20 |
|
|
|
.1.3.6.1.2.1.5.21 |
|
|
|
.1.3.6.1.2.1.5.22 |
|
|
|
.1.3.6.1.2.1.5.23 |
|
|
|
.1.3.6.1.2.1.5.24 |
|
|
|
.1.3.6.1.2.1.5.25 |
|
|
|
.1.3.6.1.2.1.5.26 |
|
.1.3.6.1.2.1.5.29 |
||
.1.3.6.1.2.1.5.29.1 |
||
.1.3.6.1.2.1.5.29.1.1 |
||
.1.3.6.1.2.1.5.29.1.2 |
||
.1.3.6.1.2.1.5.29.1.3 |
||
.1.3.6.1.2.1.5.29.1.4 |
||
.1.3.6.1.2.1.5.29.1.5 |
||
|
|
.1.3.6.1.2.1.5.3 |
|
.1.3.6.1.2.1.5.30 |
||
.1.3.6.1.2.1.5.30.1 |
||
.1.3.6.1.2.1.5.30.1.1 |
||
|
Integer32
|
.1.3.6.1.2.1.5.30.1.2 |
|
.1.3.6.1.2.1.5.30.1.3 |
||
.1.3.6.1.2.1.5.30.1.4 |
||
|
|
.1.3.6.1.2.1.5.4 |
|
|
|
.1.3.6.1.2.1.5.5 |
|
|
|
.1.3.6.1.2.1.5.6 |
|
|
|
.1.3.6.1.2.1.5.7 |
|
|
|
.1.3.6.1.2.1.5.8 |
|
|
|
.1.3.6.1.2.1.5.9 |
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- IP-MIBrfcselected
Type Definitions (4)
| Enumeration |
other(1)manual(2)dhcp(4)linklayer(5)random(6) |
|
| Enumeration |
other(1)manual(2)wellknown(3)dhcp(4)routeradv(5) |
|
| Enumeration |
preferred(1)deprecated(2)invalid(3)inaccessible(4)unknown(5)tentative(6)duplicate(7)optimistic(8) |
|
| OctetString |
range: 0..8 |
Conformance Groups (24)
Compliance Statements (2)
OID
.1.3.6.1.2.1.48.2.1.2The compliance statement for systems that implement IP -
either IPv4 or IPv6.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2, but
for which we have the following compliance requirements,
expressed in OBJECT clause form in this description
clause:
-- OBJECT ipSystemStatsIPVersion
-- SYNTAX InetVersion {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- This MIB requires support for only IPv4 and IPv6
-- versions.
--
-- OBJECT ipIfStatsIPVersion
-- SYNTAX InetVersion {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- This MIB requires support for only IPv4 and IPv6
-- versions.
--
-- OBJECT icmpStatsIPVersion
-- SYNTAX InetVersion {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- This MIB requires support for only IPv4 and IPv6
-- versions.
--
-- OBJECT icmpMsgStatsIPVersion
-- SYNTAX InetVersion {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- This MIB requires support for only IPv4 and IPv6
-- versions.
--
-- OBJECT ipAddressPrefixType
-- SYNTAX InetAddressType {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- This MIB requires support for only global IPv4 and
-- IPv6 address types.
--
-- OBJECT ipAddressPrefixPrefix
-- SYNTAX InetAddress (Size(4 | 16))
-- DESCRIPTION
-- This MIB requires support for only global IPv4 and
-- IPv6 addresses and so the size can be either 4 or
-- 16 bytes.
--
-- OBJECT ipAddressAddrType
-- SYNTAX InetAddressType {ipv4(1), ipv6(2),
-- ipv4z(3), ipv6z(4)}
-- DESCRIPTION
-- This MIB requires support for only global and
-- non-global IPv4 and IPv6 address types.
--
-- OBJECT ipAddressAddr
-- SYNTAX InetAddress (Size(4 | 8 | 16 | 20))
-- DESCRIPTION
-- This MIB requires support for only global and
-- non-global IPv4 and IPv6 addresses and so the size
-- can be 4, 8, 16, or 20 bytes.
--
-- OBJECT ipNetToPhysicalNetAddressType
-- SYNTAX InetAddressType {ipv4(1), ipv6(2),
-- ipv4z(3), ipv6z(4)}
-- DESCRIPTION
-- This MIB requires support for only global and
-- non-global IPv4 and IPv6 address types.
--
-- OBJECT ipNetToPhysicalNetAddress
-- SYNTAX InetAddress (Size(4 | 8 | 16 | 20))
-- DESCRIPTION
-- This MIB requires support for only global and
-- non-global IPv4 and IPv6 addresses and so the size
-- can be 4, 8, 16, or 20 bytes.
--
-- OBJECT ipDefaultRouterAddressType
-- SYNTAX InetAddressType {ipv4(1), ipv6(2),
-- ipv4z(3), ipv6z(4)}
-- DESCRIPTION
-- This MIB requires support for only global and
-- non-global IPv4 and IPv6 address types.
--
-- OBJECT ipDefaultRouterAddress
-- SYNTAX InetAddress (Size(4 | 8 | 16 | 20))
-- DESCRIPTION
-- This MIB requires support for only global and
-- non-global IPv4 and IPv6 addresses and so the size
-- can be 4, 8, 16, or 20 bytes.
either IPv4 or IPv6.
There are a number of INDEX objects that cannot be
represented in the form of OBJECT clauses in SMIv2, but
for which we have the following compliance requirements,
expressed in OBJECT clause form in this description
clause:
-- OBJECT ipSystemStatsIPVersion
-- SYNTAX InetVersion {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- This MIB requires support for only IPv4 and IPv6
-- versions.
--
-- OBJECT ipIfStatsIPVersion
-- SYNTAX InetVersion {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- This MIB requires support for only IPv4 and IPv6
-- versions.
--
-- OBJECT icmpStatsIPVersion
-- SYNTAX InetVersion {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- This MIB requires support for only IPv4 and IPv6
-- versions.
--
-- OBJECT icmpMsgStatsIPVersion
-- SYNTAX InetVersion {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- This MIB requires support for only IPv4 and IPv6
-- versions.
--
-- OBJECT ipAddressPrefixType
-- SYNTAX InetAddressType {ipv4(1), ipv6(2)}
-- DESCRIPTION
-- This MIB requires support for only global IPv4 and
-- IPv6 address types.
--
-- OBJECT ipAddressPrefixPrefix
-- SYNTAX InetAddress (Size(4 | 16))
-- DESCRIPTION
-- This MIB requires support for only global IPv4 and
-- IPv6 addresses and so the size can be either 4 or
-- 16 bytes.
--
-- OBJECT ipAddressAddrType
-- SYNTAX InetAddressType {ipv4(1), ipv6(2),
-- ipv4z(3), ipv6z(4)}
-- DESCRIPTION
-- This MIB requires support for only global and
-- non-global IPv4 and IPv6 address types.
--
-- OBJECT ipAddressAddr
-- SYNTAX InetAddress (Size(4 | 8 | 16 | 20))
-- DESCRIPTION
-- This MIB requires support for only global and
-- non-global IPv4 and IPv6 addresses and so the size
-- can be 4, 8, 16, or 20 bytes.
--
-- OBJECT ipNetToPhysicalNetAddressType
-- SYNTAX InetAddressType {ipv4(1), ipv6(2),
-- ipv4z(3), ipv6z(4)}
-- DESCRIPTION
-- This MIB requires support for only global and
-- non-global IPv4 and IPv6 address types.
--
-- OBJECT ipNetToPhysicalNetAddress
-- SYNTAX InetAddress (Size(4 | 8 | 16 | 20))
-- DESCRIPTION
-- This MIB requires support for only global and
-- non-global IPv4 and IPv6 addresses and so the size
-- can be 4, 8, 16, or 20 bytes.
--
-- OBJECT ipDefaultRouterAddressType
-- SYNTAX InetAddressType {ipv4(1), ipv6(2),
-- ipv4z(3), ipv6z(4)}
-- DESCRIPTION
-- This MIB requires support for only global and
-- non-global IPv4 and IPv6 address types.
--
-- OBJECT ipDefaultRouterAddress
-- SYNTAX InetAddress (Size(4 | 8 | 16 | 20))
-- DESCRIPTION
-- This MIB requires support for only global and
-- non-global IPv4 and IPv6 addresses and so the size
-- can be 4, 8, 16, or 20 bytes.
Required groups
| mandatory | ipSystemStatsGroup | |
| mandatory | ipAddressGroup | |
| mandatory | ipNetToPhysicalGroup | |
| mandatory | ipDefaultRouterGroup | |
| mandatory | icmpStatsGroup | |
| optional | ipSystemStatsHCOctetGroup |
This group is mandatory for systems that have an aggregate bandwidth of greater than 20MB. Including this group does not allow an entity to neglect the 32 bit versions of these objects. |
| optional | ipSystemStatsHCPacketGroup |
This group is mandatory for systems that have an aggregate bandwidth of greater than 650MB. Including this group does not allow an entity to neglect the 32 bit versions of these objects. |
| optional | ipIfStatsGroup | This group is optional for all systems. |
| optional | ipIfStatsHCOctetGroup |
This group is mandatory for systems that include the ipIfStatsGroup and include links with bandwidths of greater than 20MB. Including this group does not allow an entity to neglect the 32 bit versions of these objects. |
| optional | ipIfStatsHCPacketGroup |
This group is mandatory for systems that include the ipIfStatsGroup and include links with bandwidths of greater than 650MB. Including this group does not allow an entity to neglect the 32 bit versions of these objects. |
| optional | ipv4GeneralGroup | This group is mandatory for all systems supporting IPv4. |
| optional | ipv4IfGroup | This group is mandatory for all systems supporting IPv4. |
| optional | ipv4SystemStatsGroup | This group is mandatory for all systems supporting IPv4. |
| optional | ipv4SystemStatsHCPacketGroup |
This group is mandatory for all systems supporting IPv4 and that have an aggregate bandwidth of greater than 650MB. Including this group does not allow an entity to neglect the 32 bit versions of these objects. |
| optional | ipv4IfStatsGroup |
This group is mandatory for all systems supporting IPv4 and including the ipIfStatsGroup. |
| optional | ipv4IfStatsHCPacketGroup |
This group is mandatory for all systems supporting IPv4 and including the ipIfStatsHCPacketGroup. Including this group does not allow an entity to neglect the 32 bit versions of these objects. |
| optional | ipv6GeneralGroup2 | This group is mandatory for all systems supporting IPv6. |
| optional | ipv6IfGroup | This group is mandatory for all systems supporting IPv6. |
| optional | ipAddressPrefixGroup | This group is mandatory for all systems supporting IPv6. |
| optional | ipv6ScopeGroup | This group is mandatory for all systems supporting IPv6. |
| optional | ipv6RouterAdvertGroup | This group is mandatory for all IPv6 routers. |
| optional | ipLastChangeGroup | This group is optional for all agents. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| ipv6IpForwarding | readonly | An agent is not required to provide write access to this object. |
|
| ipv6IpDefaultHopLimit | readonly | An agent is not required to provide write access to this object. |
|
| ipv4InterfaceEnableStatus | readonly | An agent is not required to provide write access to this object. |
|
| ipv6InterfaceEnableStatus | readonly | An agent is not required to provide write access to this object. |
|
| ipv6InterfaceForwarding | readonly | An agent is not required to provide write access to this object. |
|
| ipAddressSpinLock | noaccess | An agent is not required to provide write access to this object. However, if an agent provides write access to any of the other objects in the ipAddressGroup, it SHOULD provide write access to this object as well. |
|
| ipAddressIfIndex | readonly | An agent is not required to provide write or create access to this object. |
|
| ipAddressType | readonly | An agent is not required to provide write or create access to this object. |
|
| ipAddressStatus | readonly | An agent is not required to provide write or create access to this object. |
|
| ipAddressRowStatus | readonly |
active(1)
|
An agent is not required to provide write or create access to this object. |
| ipAddressStorageType | readonly | An agent is not required to provide write or create access to this object. If an agent allows this object to be written or created, it is not required to allow this object to be set to readOnly, permanent, or nonVolatile. |
|
| ipNetToPhysicalPhysAddress | readonly | An agent is not required to provide write or create access to this object. |
|
| ipNetToPhysicalType | readonly | An agent is not required to provide write or create access to this object. |
|
| ipv6RouterAdvertSpinLock | readonly | An agent is not required to provide write access to this object. However, if an agent provides write access to any of the other objects in the ipv6RouterAdvertGroup, it SHOULD provide write access to this object as well. |
|
| ipv6RouterAdvertSendAdverts | readonly | An agent is not required to provide write access to this object. |
|
| ipv6RouterAdvertMaxInterval | readonly | An agent is not required to provide write access to this object. |
|
| ipv6RouterAdvertMinInterval | readonly | An agent is not required to provide write access to this object. |
|
| ipv6RouterAdvertManagedFlag | readonly | An agent is not required to provide write access to this object. |
|
| ipv6RouterAdvertOtherConfigFlag | readonly | An agent is not required to provide write access to this object. |
|
| ipv6RouterAdvertLinkMTU | readonly | An agent is not required to provide write access to this object. |
|
| ipv6RouterAdvertReachableTime | readonly | An agent is not required to provide write access to this object. |
|
| ipv6RouterAdvertRetransmitTime | readonly | An agent is not required to provide write access to this object. |
|
| ipv6RouterAdvertCurHopLimit | readonly | An agent is not required to provide write access to this object. |
|
| ipv6RouterAdvertDefaultLifetime | readonly | An agent is not required to provide write access to this object. |
|
| ipv6RouterAdvertRowStatus | readonly | An agent is not required to provide write or create access to this object. |