PIM-SM-MIB Table View

The PIM Information Table contains PIM related information, such as DR
priority.

swPimInfoEntry row .1.3.6.1.4.1.171.12.52.2.3.1

An entry in the PIM Information Table.

Indexes

swPimInfoInterface

Column	Syntax	OID
swPimInfoInterface The ifIndex value of this PIM interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.171.12.52.2.3.1.1
swPimInfoAddress The IP address of the PIM interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.2.3.1.2
swPimInfoNetMask The network mask for the IP address of the PIM interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.2.3.1.3
swPimInfoDesignatedRouter The Designated Router on this PIM interface. For point-to-point interfaces, this object has the value 0.0.0.0.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.2.3.1.4
swPimInfoHelloInterval The frequency at which PIM Hello messages are transmitted on this interface.	secondsInteger32r/w Constraints: range: 1-18724	.1.3.6.1.4.1.171.12.52.2.3.1.5
swPimInfoJoinPruneInterval The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimJoinPruneInterval.	secondsInteger32r/w Constraints: range: 1-18724	.1.3.6.1.4.1.171.12.52.2.3.1.6
swPimInfoDRPriority The DR Priority sets the priority of an IP interface to become the Designated router for the multiple access network. A numerically larger priority is always preferred, yet a lower number represents a higher priority. A…	Unsigned32r/w Constraints: range: 0-4294967294	.1.3.6.1.4.1.171.12.52.2.3.1.7
swPimInfoMode The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1.	Enumerationr/w Enumerated Values: 1 dense 2 sparse 3 sparseDense	.1.3.6.1.4.1.171.12.52.2.3.1.8
swPimInfoState The configured state of this PIM interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.52.2.3.1.9
swPimInfoPassiveMode Specifies the interface is operates in PIM passive mode or not. When enabling the passive mode, the interface will neither send PIM messages nor accept PIM messages from other routers across this interface. …	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.12.52.2.3.1.10

The PIM CBSR Table contains information related to the candidate bootstrap 
router, such as interface name, IP address and priority.

swPimCbsrEntry row .1.3.6.1.4.1.171.12.52.3.1.3.1

An entry in the PIM CBSR Table.

Indexes

swPimCbsrInterface

Column	Syntax	OID
swPimCbsrInterface The ifIndex value of this PIM interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.171.12.52.3.1.3.1.1
swPimCbsrIpAddress The IP address of this PIM interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.1.3.1.2
swPimCbsrSubnetMask The IP netmask for this PIM interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.1.3.1.3
swPimCbsrPriority The preference value for the local candidate interface to become a bootstrap router. A value of -1 is used to indicate that the local candidate interface cannot become the BSR.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.171.12.52.3.1.3.1.4

The (conceptual) table listing the IP multicast groups
that the local router will use to advertise itself as a
Candidate-RP when the pimComponentCRPHoldTime has a
non-zero value.  If this table is empty, then the local router
          
will advertise itself as a Candidate-RP for all groups
(providing the pimComponentCRPHoldTime has a non-
zero value).

swPimCandidateRPEntry row .1.3.6.1.4.1.171.12.52.3.2.4.1

An entry (conceptual row) in the pimCandidateRPTable.

Indexes

swPimCandidateRPGroupAddress swPimCandidateRPGroupMask

Column	Syntax	OID
swPimCandidateRPGroupAddress The IP multicast group address which, when combined with pimCandidateRPGroupMask, identifies a group prefix that the local router will use to advertise itself as a Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.2.4.1.1
swPimCandidateRPGroupMask The multicast group address mask which, when combined with pimCandidateRPGroupMask, identifies a group prefix that the local router will use to advertise itself as a Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.2.4.1.2
swPimCandidateRPInterface The name of the interface which will be advertised as a Candidate-RP.	OctetStringr/w Constraints: range: 1-12	.1.3.6.1.4.1.171.12.52.3.2.4.1.3
swPimCandidateRPRowStatus The status of this row,displaying the new entries that have been created, or the old entries that have been deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.52.3.2.4.1.4

The (conceptual) table listing the router's PIM neighbors.

swPimNeighborEntry row .1.3.6.1.4.1.171.12.52.3.3.1

An entry (conceptual row) in the swPimNeighborTable.

Indexes

swPimNeighborAddress

Column	Syntax	OID
swPimNeighborAddress The IP address of the PIM neighbor that is used to find PIM neighbor information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.3.1.1
swPimNeighborIfIndex The value of the ifIndex for the interface used to find PIM neighbor information.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.171.12.52.3.3.1.2
swPimNeighborExpiryTime The minimum time remaining before this PIM neighbor ages out.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.12.52.3.3.1.3

The PIM Register Checksum Including Data Table contains the PIM
register checksum including data information, such as the RP address and
state.

swPimRegChksumIncDataEntry row .1.3.6.1.4.1.171.12.52.3.5.1

An entry in the PIM Register Checksum Including Data Table.

Indexes

swL3SwPimRegChksumIncDataRpAddr

Column	Syntax	OID
swL3SwPimRegChksumIncDataRpAddr Specifies the RP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.5.1.1
swL3SwPimRegChksumIncDataState The state of the register checksum, including data for RPs.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.52.3.5.1.2

The PIM Static RP Table contains the PIM static RP related information,
such as the group address, the group mask, the RP address and the RP row status.

swPimStaticRPEntry row .1.3.6.1.4.1.171.12.52.3.6.1

An entry in the PIM Static RP Table.

Indexes

swPimStaticRPGroupAddress swPimStaticRPGroupMask swPimStaticRPAddress

Column	Syntax	OID
swPimStaticRPGroupAddress The IP multicast group address which, when combined with swPimStaticRPGroupMask, identifies a group prefix that the local router will use to advertise itself as a static RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.6.1.1
swPimStaticRPGroupMask The multicast group address mask which, when combined with swPimStaticRPGroupAddress, identifies a group prefix that the local router will use to advertise itself as a static RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.6.1.2
swPimStaticRPAddress The (unicast) address of the interface which will be advertised as a static RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.6.1.3
swPimStaticRPRowStatus The status of this row, indicating which new entries will be created, or which old entries will be deleted from this row table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.12.52.3.6.1.4

The (conceptual) table listing PIM-specific information on
a subset of the rows of the ipMRouteTable defined in the IP
Multicast MIB.

swPimIpMRouteEntry row .1.3.6.1.4.1.171.12.52.3.7.1

An entry (conceptual row) in the pimIpMRouteTable. There
is one entry, for each entry in the ipMRouteTable, whose incoming
interface is running PIM.

Indexes

swPimIpMRouteGroup swPimIpMRouteSource swPimIpMRouteSourceMask

Column	Syntax	OID
swPimIpMRouteGroup The IP multicast group address for an entry containing multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.7.1.1
swPimIpMRouteSource The network address which, when combined with the corresponding value of ipMRouteSourceMask, identifies the source of an entry that contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.7.1.2
swPimIpMRouteSourceMask The network mask which, when combined with the corresponding value of ipMRouteSource, identifies the source of an entry that contains multicast routing information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.7.1.3
swPimIpMRouteUpstreamAssertTimer The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates t…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.12.52.3.7.1.4
swPimIpMRouteAssertMetric The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is received.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.52.3.7.1.5
swPimIpMRouteAssertMetricPref The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.52.3.7.1.6
swPimIpMRouteAssertRPTBit The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.12.52.3.7.1.7
swPimIpMRouteFlags This object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits.	Bits Enumerated Values: 0 rpt 1 spt	.1.3.6.1.4.1.171.12.52.3.7.1.8
swPimIpMRouteType This object describes the PIM-specific type as related to a multicast state entry.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.12.52.3.7.1.9

The (conceptual) table lists PIM information for the
candidate Rendezvous Points (CRPs) for IP multicast groups.
When the local router is the BSR, this information is
obtained from received Candidate-RP-Advertisements.  When
the local router is not the BSR, this information is
obtained from the received RP-Set messages.

swPimRPSetEntry row .1.3.6.1.4.1.171.12.52.3.8.2.1

An entry (conceptual row) in the pimRPSetTable.

Indexes

swPimRPSetComponent swPimRPSetGroupAddress swPimRPSetGroupMask swPimRPSetAddress

Column	Syntax	OID
swPimRPSetComponent A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.12.52.3.8.2.1.1
swPimRPSetGroupAddress The IP multicast group address which, when combined with pimRPSetGroupMask, gives the group a prefix. This prefix will determine for which entry CRP information is to be displayed, and which entry contains information…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.8.2.1.2
swPimRPSetGroupMask The multicast group address mask which, when combined with pimRPSetGroupAddress, gives the group a prefix to determine which entry contains the CRP information to be displayed for the entry containing information abou…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.8.2.1.3
swPimRPSetAddress The IP address of the Candidate-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.12.52.3.8.2.1.4
swPimRPSetType The type of Candidate-RP. The value of 'dynamic' indicates the RP address is created as a result of running the PIM Bootstrap Router (BSR) mechanism.	Enumeration Enumerated Values: 1 none 2 static 3 dynamic	.1.3.6.1.4.1.171.12.52.3.8.2.1.5
swPimRPSetHoldTime The amount of time (in seconds) the RP is valid.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.12.52.3.8.2.1.6
swPimRPSetUpTime The time since the RP became active.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.12.52.3.8.2.1.7
swPimRPSetExpiryTime The time remaining before the RP expires. If the object swPimRPSetType value is 'static', the value of this object is zero.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.12.52.3.8.2.1.8