PDN-DIAGNOSTICS-MIB Table View

This table contains input and results of a packet loopback
test. This table is indexed by ifIndex. This is a interface
related test. There can be only one test running per 
interface. This table should be used in conjunction with 
ifTestTable(Rfc 1573) with all the semantics of ifTestTable.

ifLoopbackTestEntry row .1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1

An entry containing objects for test input and result
for packet loopback test

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
loopbackTestInputNumCyclesmandatory This object corresponds the number of cycles the test to be run for. One cycle corresponds to a 15 second interval. The default value for this object is 40.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.1
loopbackTestResultsPktsSentmandatory This object corresponds to the number of packets sent	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.2
loopbackTestResultsPktsRcvdOKmandatory This object corresponds to the number of packets which were received without any error	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.3
loopbackTestResultsPktsRcvdErrmandatory This object corresponds to the number of packets which were received with errors	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.4
loopbackTestResultsPktsNotRcvdmandatory This object corresponds to the number of packets which were sent but not received	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.5
loopbackTestResultsPktErrorRatemandatory Reflects the error rate of the loopback test. this string will represent a floating point number of the form [ErrRate][eE][+-][ErrRateBase] where ErrRate and ErrRateBase are integers. In Other Words ErrRate * [10^ -E…	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.6
loopbackTestResultsErrSecsmandatory This object corresponds to the number of errored seconds	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.7
loopbackTestResultsSvrErrSecsmandatory This object corresponds to the number of severely errored seconds	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.8
loopbackTestResultsElpTimemandatory This object corresponds to the number of seconds elapsed since the start of the test.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.9

This table contains the objects for Bit Error Rate Test. This table
is indexed by ifIndex.

ifBERTObjectsEntry row .1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1

An Entry containing objects of BERT.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
ifBERTTestDurationmandatory This object represents the test duration in seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.1
ifBERTElapsedTimemandatory This object represents the elapsed time in seconds.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.2
ifBERTDownSyncUPmandatory This object indicates whether Downstream sync is enabled .	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.3
ifBERTUpSyncUPmandatory This object indicates whether upstream sync is enabled.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.4
ifBERTSegmentsSentmandatory This object represents the number of segments sent during the test	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.5
ifBERTDownMBitsRcvdmandatory This represents the number of million bits rcvd downstream.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.6
ifBERTUpMBitsRcvdmandatory This represents the number of million bits rcvd upstream.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.7
ifBERTDownBitErrDetectedmandatory This represents the number of bit errors detected downstream.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.8
ifBERTUpBitErrDetectedmandatory This represents the number of bit errors detected upstream.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.9
ifBERTDownBitErrRatemandatory This string will represent a floating point number of the form [Er rRate] [eE] [+-] [ErrRatebase] where ErrTare and errRateBase are integers.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.10
ifBERTUpBitErrRatemandatory This object reflects the error rate of BERT in Upstream direction. This string will represent a floating point number of the form [ErrRate] [eE] [+-] [ErrRatebase] where ErrTare and errRateBase are integers.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.11
ifBERTDownErroredSecsmandatory This represents number of errored seconds downstream. Errored second is a second in which there is at least 1 block error.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.12
ifBERTUpErroredSecsmandatory This represents number of errored seconds upstream. Errored second is a second in which there is at least 1 block error.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.13
ifBERTDownLineRatemandatory This represents the downstream line rate in KBPS	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.14
ifBERTUpLineRatemandatory This represents the Upstream line rate in KBPS	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.15
ifBERTDownMarginmandatory This represents the Downstream margin in decibels (DB).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.16
ifBERTUpMarginmandatory This represents the upstream margin in decibels (DB).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.17

This table contains the objects for Block Error Rate Test (BLERT).
This table is indexed by ifIndex.

ifBLERTObjectsEntry row .1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1

An Entry containing objects of BLERT.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
ifBLERTTestDurationmandatory This object represents the test duration in seconds.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.1
ifBLERTElapsedTimemandatory This object represents the elapsed time in seconds since the test started.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.2
ifBLERTTxSeqCountmandatory This object indicates the next Tx sequence.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.3
ifBLERTRxSeqCountmandatory This object indicates the next Rx sequence.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.4
ifBLERTRxGoodFramesmandatory This object indicates the number of good frames received.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.5
ifBLERTTxGoodFramesmandatory This object indicates the number of good frames transmitted.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.6
ifBLERTRxBadFramesmandatory This object indicates the number of bad frames received.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.7
ifBLERTTxBadFramesmandatory This object indicates the number of bad frames transmitted.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.8
ifBLERTDnLineRatemandatory This object indicates the downstream line rate.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.9
ifBLERTUpLineRatemandatory This object indicates the upstream line rate.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.1.3.1.10

This table controls all the application tests.  It defines a test type,
starts a test, and clears a test.

applTestStatusEntry row .1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1

An entry containing objects for invoking application based tests

Indexes

applTestId

Column	Syntax	OID
applTestIdmandatory A unique ID to identify each application test.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.1
applTestTypemandatory This object defines the application test type.	SNMPv2-TCAutonomousTyper/w Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.2
applTestStatusmandatory This object shows the current status of an application test. none - indicates waiting for test parameters. inProgress - indicates the test is in process. success - indicates the test is completed. failed …	Enumeration Enumerated Values: 1 none 2 inProgress 3 success 4 failed 5 abort	.1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.3
applTestErrorCodemandatory This object shows the reason for a test failure.	Enumeration Enumerated Values: 1 none 2 timeout 3 icmpError 4 systemError	.1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.4
applTestOwnermandatory The network manager who has started the test	OctetStringr/w Constraints: range: 1-40	.1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.5
applTestRowStatusmandatory This object is used to create a new row or delete an existing row for an application test.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.6

This table contains objects which allow network manager to
ping a destination.

applPingTestEntry row .1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1

This table contains the input parameters for a ping test
and the results of the ping test.

Indexes

applPingTestId

Column	Syntax	OID
applPingTestIdmandatory A unique ID to identify each application test.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.1
applPingTestIpAddressmandatory The IP address to be pinged.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.2
applPingTestSourceIpAddrmandatory The Source IP address where we are pinging from. This is an optional object for some devices. See operational specification for its use.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.3
applPingTestPacketSizemandatory This object corresponds to the size of the packet (in bytes) which will be sent during the Ping test. The default value for this object is 64 bytes	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.4
applPingTestTimeoutmandatory This object corresponds to a timeout value (in seconds) between Pings. The default value for this object is 5 seconds	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.5
applPingTestMaxPingsmandatory This object corresponds to the maximum number of times the device should Ping for the destination. The default value for this object is 10	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.6
applPingTestPktsSentmandatory This object corresponds to the total number of packets sent.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.7
applPingTestPktsRecvmandatory This object corresponds to the total number of packets received without error	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.8
applPingTestMinTimemandatory The minimum round trip time.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.9
applPingTestMaxTimemandatory The maximum round trip time.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.10
applPingTestAvgTimemandatory The average round trip time.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.11
applPingTestDomainmandatory This object specifies the destination ip address's domain. The Default is service domain. Not allowed if source ip address is entered. This is an optional object for some devices. See operational specification its use.	Enumerationr/w Enumerated Values: 1 noop 2 mgmt 3 service	.1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.12
applPingTestIfIndexmandatory This object specifies the interface over which the ping test will take place.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.13

This table contains objects which allow network manager to
enter the parameters of a traceroute test.

applTracerouteConfigEntry row .1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1

This table contains the input parameters for a traceroute test.

Indexes

applTracerouteTestId

Column	Syntax	OID
applTracerouteTestIdmandatory A unique ID to identify each application test.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.1
applTracerouteIpAddressmandatory The destination IP address of a traceroute test.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.2
applTracerouteSourceIpAddrmandatory The source IP address of where the traceroute test started. This is an optional object for some devices. See operational specification for its use.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.3
applTraceroutePktsSizemandatory This object corresponds to the size of the packet (in bytes) which will be sent during the traceroute test. Please refer to product specific documentation for the default values supported	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.4
applTracerouteTimeoutmandatory This object corresponds to a timeout value (in seconds) of a traceroute test. The default value for this object is 5 seconds	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.5
applTracerouteMaxHopsmandatory This object corresponds to the maximum number of hops to reach the destination. The default value for this object is device specific. See Operational Specifications	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.6
applTracerouteDomainmandatory This object specifies the destination ip address's domain. The Default is service domain. Not allowed if source ip address is entered. This is an optional object for some devices. See operational specification its use.	Enumerationr/w Enumerated Values: 1 noop 2 mgmt 3 service	.1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.7
applTracerouteIfIndexmandatory This object specifies the interface over which the trace-route test will take place.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.8

This table contains results of traceroute test.

applTracerouteResultEntry row .1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1

An entry contains the objects for the traceroute test.

Indexes

applTracerouteResultTestId applTracerouteHopCount

Column	Syntax	OID
applTracerouteResultTestIdmandatory A unique ID to identify each application test.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.1
applTracerouteHopCountmandatory This object contains the number of hops to reach the gateway.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.2
applTracerouteIpAddrmandatory This object contains the IP address of the gateway.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.3
applTraceroutePktSizemandatory This object corresponds to the size of the packet (in bytes) which will be sent during the traceroute test. Please refer to product specific documentation for the default values supported	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.4
applTracerouteProbe1RTTmandatory This object contains the round trip time (rtt) of the first probe sent to the gateway. If the probe has a timeout the rtt is set to -1.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.5
applTracerouteProbe2RTTmandatory This object contains the round trip time (rtt) of the second probe sent to the gateway. If the probe has a timeout the rtt is set to -1.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.6
applTracerouteProbe3RTTmandatory This object contains the round trip time (rtt) of the third probe sent to the gateway. If the probe has a timeout the rtt is set to -1.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.7