PDN-ADSL-LINE-EXT-MIB Table View

This table extends the adslLineTable in support of an 
ADSL Line object.
          
The objects pdnAdslLineTransAtucCap, pdnAdslLineTrans-
AtucConfig, and pdnAdslLineTransAtucActual exist along
with their PdnAdslTransmissionModeType TC because the 
AdslTransmissionModeType defined in the ADSL-LINE-EXT-MIB
does not include the ADSL2/ADSL2plus bits defined in
ITU G.997.1 (05/2003) ATU Transmission System Enabling (ATSE) 
section. 
          
When using the objects defined in this MIB with a syntax of 
type PdnAdslTransmissionModeType, the interworking relationship
between these objects and the objects defined in the ADSL-LINE-
EXT-MIB defined with a syntax of type AdslTransmissionModeType
must be considered and explained in an implementation-specific
document such as an Operational Specification. Note that the
PdnAdslTransmissionModeType is a super set of the AdslTransmis-
sionModeType. One possible implementation could be as follows:
    1.  Both objects of syntax AdslTransmissionModeType defined 
        in the ADSL-LINE-EXT-MIB and objects of syntax PdnAdsl-
        TransmissionModeType defined in this MIB are supported.
        By supporting both, a manager with the ADSL-LINE-EXT-MIB
        loaded could manage the device with the restriction of
        not being able to utilize ADSL2/ADSL2plus modes.
    2.  When the ADSL2/ADSL2plus capabilities are desired, a manager
        would have to use the objects defined in this MIB to 
        configure the transmission modes, read capability, or
        read the actual transmission mode of the ATU-C. 
    3.  The transmission mode that the ATU-C is currently 
        configured for is based on the last object, adslLineTrans-
        AtucConfig or pdnAdslLineTransAtucConfig, that was written.

pdnAdslLineExtEntry row .1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1

An extended entry in the adslLineTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
pdnAdslLineTransAtucCap The transmission modes, represented by a bitmask that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment.	PdnAdslTransmissionModeType Type Values: 0 ansit1413 1 etsi 2 q9921PotsNonOverlapped 3 q9921PotsOverlapped 4 q9921IsdnNonOverlapped 5 q9921isdnOverlapped 6 q9921tcmIsdnNonOverlapped 7 q9921tcmIsdnOverlapped 8 q9922potsNonOverlapeed 9 q9922potsOverlapped 10 q9922tcmIsdnNonOverlapped 11 q9922tcmIsdnOverlapped 12 q9921tcmIsdnSymmetric 13 reservedBit13 14 reservedBit14 15 reservedBit15 16 reservedBit16 17 reservedBit17 18 q9923potsNonOverlapped 19 q9923potsOverlapped 20 q9923isdnNonOverlapped 21 q9923isdnOverlapped 22 reservedBit22 23 reservedBit23 24 q9924potsNonOverlapped 25 q9924potsOverlapped 26 reservedBit26 27 reservedBit27 28 q9923DigitalNonOverlappedI 29 q9923DigitalOverlappedI 30 q9923DigitalNonOverlappedJ 31 q9923DigitalOverlappedJ 32 q9924DigitalNonOverlappedI 33 q9924DigitalOverlappedI 34 q9923ReachExtOverPotsMode1L 35 q9923ReachExtOverPotsMode2L 36 q9923ReachExtOverPotsMode3L 37 q9923ReachExtOverPotsMode4L 38 q9923ExtUpOverPotsNonOverlappedM 39 q9923ExtUpOverPotsOverlappedM 40 q9925potsNonOverlapped 41 q9925potsOverlapped 42 q9925isdnNonOverlapped 43 q9925isdnOverlapped 44 reserved44 45 reserved45 46 q9925DigitalNonOverlappedI 47 q9925DigitalOverlappedI 48 q9925DigitalNonOverlappedJ 49 q9925OverlappedJ 50 q9925ExtUpOverPotsNonOverlappedM 51 q9925ExtUpOverPotsOverlappedM 52 reservedBit52 53 reservedBit53 54 reservedBit54 55 reservedBit55	.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.1
pdnAdslLineTransAtucConfig The transmission modes, represented by a bitmask, currently enabled by the ATU-C. The manager can only set those modes that are supported by the ATU-C. An ATU-C's supported modes are provided by pdnAdslLineTransAtuc…	PdnAdslTransmissionModeTyper/w Type Values: 0 ansit1413 1 etsi 2 q9921PotsNonOverlapped 3 q9921PotsOverlapped 4 q9921IsdnNonOverlapped 5 q9921isdnOverlapped 6 q9921tcmIsdnNonOverlapped 7 q9921tcmIsdnOverlapped 8 q9922potsNonOverlapeed 9 q9922potsOverlapped 10 q9922tcmIsdnNonOverlapped 11 q9922tcmIsdnOverlapped 12 q9921tcmIsdnSymmetric 13 reservedBit13 14 reservedBit14 15 reservedBit15 16 reservedBit16 17 reservedBit17 18 q9923potsNonOverlapped 19 q9923potsOverlapped 20 q9923isdnNonOverlapped 21 q9923isdnOverlapped 22 reservedBit22 23 reservedBit23 24 q9924potsNonOverlapped 25 q9924potsOverlapped 26 reservedBit26 27 reservedBit27 28 q9923DigitalNonOverlappedI 29 q9923DigitalOverlappedI 30 q9923DigitalNonOverlappedJ 31 q9923DigitalOverlappedJ 32 q9924DigitalNonOverlappedI 33 q9924DigitalOverlappedI 34 q9923ReachExtOverPotsMode1L 35 q9923ReachExtOverPotsMode2L 36 q9923ReachExtOverPotsMode3L 37 q9923ReachExtOverPotsMode4L 38 q9923ExtUpOverPotsNonOverlappedM 39 q9923ExtUpOverPotsOverlappedM 40 q9925potsNonOverlapped 41 q9925potsOverlapped 42 q9925isdnNonOverlapped 43 q9925isdnOverlapped 44 reserved44 45 reserved45 46 q9925DigitalNonOverlappedI 47 q9925DigitalOverlappedI 48 q9925DigitalNonOverlappedJ 49 q9925OverlappedJ 50 q9925ExtUpOverPotsNonOverlappedM 51 q9925ExtUpOverPotsOverlappedM 52 reservedBit52 53 reservedBit53 54 reservedBit54 55 reservedBit55	.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.2
pdnAdslLineTransAtucActual The actual transmission mode of the ATU-C. During ADSL line initialization, the ADSL Transceiver Unit Remote terminal end (ATU-R) will determine the mode used for the link. This value will be limited a single transmi…	PdnAdslTransmissionModeType Type Values: 0 ansit1413 1 etsi 2 q9921PotsNonOverlapped 3 q9921PotsOverlapped 4 q9921IsdnNonOverlapped 5 q9921isdnOverlapped 6 q9921tcmIsdnNonOverlapped 7 q9921tcmIsdnOverlapped 8 q9922potsNonOverlapeed 9 q9922potsOverlapped 10 q9922tcmIsdnNonOverlapped 11 q9922tcmIsdnOverlapped 12 q9921tcmIsdnSymmetric 13 reservedBit13 14 reservedBit14 15 reservedBit15 16 reservedBit16 17 reservedBit17 18 q9923potsNonOverlapped 19 q9923potsOverlapped 20 q9923isdnNonOverlapped 21 q9923isdnOverlapped 22 reservedBit22 23 reservedBit23 24 q9924potsNonOverlapped 25 q9924potsOverlapped 26 reservedBit26 27 reservedBit27 28 q9923DigitalNonOverlappedI 29 q9923DigitalOverlappedI 30 q9923DigitalNonOverlappedJ 31 q9923DigitalOverlappedJ 32 q9924DigitalNonOverlappedI 33 q9924DigitalOverlappedI 34 q9923ReachExtOverPotsMode1L 35 q9923ReachExtOverPotsMode2L 36 q9923ReachExtOverPotsMode3L 37 q9923ReachExtOverPotsMode4L 38 q9923ExtUpOverPotsNonOverlappedM 39 q9923ExtUpOverPotsOverlappedM 40 q9925potsNonOverlapped 41 q9925potsOverlapped 42 q9925isdnNonOverlapped 43 q9925isdnOverlapped 44 reserved44 45 reserved45 46 q9925DigitalNonOverlappedI 47 q9925DigitalOverlappedI 48 q9925DigitalNonOverlappedJ 49 q9925OverlappedJ 50 q9925ExtUpOverPotsNonOverlappedM 51 q9925ExtUpOverPotsOverlappedM 52 reservedBit52 53 reservedBit53 54 reservedBit54 55 reservedBit55	.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.3
pdnAdslLinePowerManagementConfig This object enables or disables power management functionality.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.4
pdnAdslLineSpectrumProfile The value of this object identifies the row in the ADSL Line Spectrum Profile Table, pdnAdslLineSpectrumProfileTable, which applies for this ADSL line. If this object is not a zero-length string, it should default to th…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.5
pdnAdslLinePmMode The line states the ATU-C or ATU-R may autonomously transition to on this line. It is coded in a bit-map representation (0 if not allowed, 1 if allowed) as follows: idleStateL3(0) - Bit 0 L3 state (Idle state) …	Bitsr/w Enumerated Values: 0 idleStateL3 1 lowPwrStateL1L2	.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.6
pdnAdslLineL0Time The minimum time, in seconds, between and Exit from the L2 state and the next Entry into the L2 state.	secondsUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.7
pdnAdslLineL2Time The minimum time, in seconds, between an Entry into the L2 state and the first Power Trim in the L2 state and between two con- secutive Power Trims in the L2 State.	secondsUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.8
pdnAdslLineL2Atpr The maximum aggregate transmit power reduction, in dB, that can be performed through a single Power Trim in the L2 state. At the time this MIB was produced, the upper limit for this object was not updated…	dBUnsigned32r/w Constraints: range: 0-31	.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.9
pdnAdslLineLdsf Defines whether the line should be forced into the loop diagnostics mode by the near-end ATU on this line. ldsfMode0(1) - 0: Inhibits the near-end ATU from performing loop diagnostics mode proc…	Enumerationr/w Enumerated Values: 1 ldsfMode0 2 ldsfMode1	.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.10
pdnAdslLineL2Atprt This parameter represents the total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at transition of L0 to L2 state) and Po…	dBUnsigned32r/w Constraints: range: 0-31	.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.11

This table contains specific configuration of transmission
spectrum and power spectral density related parameters that
can be mapped to one of the ADSL lines.

pdnAdslLineSpectrumProfileEntry row .1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1

Each entry contains a specific profile for transmission
spectrum and power spectral density related parameters.
A default profile with an index of `DEFVAL', will always
exist and its parameters will be set to vendor or …

Indexes

pdnAdslLineSpectrumProfileName

Column	Syntax	OID
pdnAdslLineSpectrumProfileName This object identifies a row in the pdnAdslLineSpectrumProfile- Table. The system will always provide a default profile whose name is `DEFVAL'.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.1
pdnAdslLineSpectrumProfileRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile is activated by setting this object to `valid'. Before a profile can be deleted or taken out of service…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.2
pdnAdslLineSpectrumModeSpecificPsdProfile The value of this object identifies the row(s) in the ADSL Mode-Specific PSD Configuration Table, pdnAdslModeSpecific- PsdConfTable, which applies for this Line Spectrum Profile. A particular ADSL line ma…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.3
pdnAdslLineSpectrumAtucCarMaskProfile This object identifies one or more rows in the pdnAdslCarMaskTable. The pdnAdslCarMaskTable is a table containing a list of subcarriers to be masked in the downstream or upstream direction; the profile in the pdAdslCa…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.4
pdnAdslLineSpectrumAturCarMaskProfile This object identifies one or more rows in the pdnAdslCarMaskTable. The pdnAdslCarMaskTable is a table containing a list of subcarriers to be masked in the downstream or upstream direction; the profile in the pdAdslCa…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.5

This table binds an entry indexed by a specific ADSL type or
flavor (e.g. ADSL2 or ADSL2+) and indexed by a profile name
to a specific DSL PSD Configuration Profile.

pdnAdslModeSpecificPsdConfEntry row .1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1

An entry in the table. For each particular ADSL mode or
flavor supported (pdnAdslMOdeSpecificPsdConfAdslMode), there
will be an entry that points to an entry in the ADSL PSD
Configuration Table (pdnAdslPsdConfTable). F…

Indexes

pdnAdslModeSpecificPsdConfProfileName pdnAdslModeSpecificPsdConfAdslMode

Column	Syntax	OID
pdnAdslModeSpecificPsdConfProfileName This object identifies a row in the pdnAdslModeSpecificPsdConfTable. The system will always provide a default profile whose name is 'DEFVAL'.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1.1
pdnAdslModeSpecificPsdConfAdslMode This object identifies a row in the pdnAdslModeSpecificPsdConfTable containing parameters specific to a particular ADSL mode or flavor identified by this object.	Enumeration Enumerated Values: 1 adsl2 2 adsl2NoSplitter 3 adsl2plus	.1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1.2
pdnAdslModeSpecificPsdConfRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile is activated by setting this object to `valid'. Before a profile can be deleted or taken out of service…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1.3
pdnAdslModeSpecificPsdConfAdslPsdConfProfile This object identifies a row in the ADSL PSD Configuration Table, pdnAdslPsdConfTable.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1.4

This table contains power spectral density settings.

pdnAdslPsdConfEntry row .1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1

Each entry contains specific power spectral density settings for
a particular profile. A default profile for each particular
ADSL mode or flavor supporting PSD configuration will exist
(See the pdnAdslModeSpecificPsdCon…

Indexes

pdnAdslPsdConfProfileName

Column	Syntax	OID
pdnAdslPsdConfProfileName This object identifies a row in the pdnAdslPsdConfTable.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.1
pdnAdslPsdConfRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile is activated by setting this object to `valid'. Before a profile can be deleted or taken out of service…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.2
pdnAdslPsdConfAtucMaxNomPsd Represents the Maximum nominal transmit PSD for the ATU-C. The values range from -80 to -40 dBm/Hz in 0.1 dB steps.	tenth dBm/HzInteger32r/w Constraints: range: -800--400	.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.3
pdnAdslPsdConfAturMaxNomPsd Represents the Maximum nominal transmit PSD for the ATU-R. The values range from -65 to -38 dBm/Hz in 0.1 dB steps.	tenth dBm/HzInteger32r/w Constraints: range: -650--380	.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.4
pdnAdslPsdConfAtucMaxNomAtp Represents the Maximum nominal aggregate transmit power for the ATU-C. The values range from 0 to 25.5 dBm in 0.1 dB steps.	tenth dBmUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.5
pdnAdslPsdConfAturMaxNomAtp Represents the Maximum nominal aggregate transmit power for the ATU-R. The values range from 0 to 25.5 dBm in 0.1 dB steps.	tenth dBmUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.6
pdnAdslPsdConfAtucMaxRxPwr Represents the maximum upstream aggregate receive power over a set of subcarriers (in dBm). The ATU-C shall request an upstream power cutback such that the upstream aggregate receive power over that set of subcarriers i…	tenth dBmInteger32r/w Constraints: range: -255-255 range: 2048-2048	.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.7

This table contains a list of subcarriers that are to be
masked (i.e. not transmitted). Subcarriers that are not
entries in this table are not masked.

pdnAdslCarMaskEntry row .1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1

Each entry represents a specific subcarrier that is masked
for a particular profile.

Indexes

pdnAdslCarMaskProfileName pdnAdslCarMaskSubCarrierIndex

Column	Syntax	OID
pdnAdslCarMaskProfileName This object identifies a row in the pdnAdslCarMaskTable based on a profile name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1.1
pdnAdslCarMaskSubCarrierIndex This object identifies a row in the pdnAdslCarMaskTable based on subcarrier that is being masked. The subcarrier index ranges from 0 to (NSCds-1 or NSCus-1 (NSC is Number of Subcarriers) as specified in G.997.1 where N…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1.2
pdnAdslCarMaskRowStatus This object is used to create a new row or delete an existing row in this table. A row is activated by setting this object to active(1).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1.3
pdnAdslCarMaskSubCarrierStatus This object provides a clear indication that the subcarrier is masked.	Enumeration Enumerated Values: 1 masked	.1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1.4

This table contains current line status measurements.

pdnAdslLineStatusEntry row .1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1

Each entry represents an interface.
i.e. a row in the ifTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
pdnAdslLineStatusAtucLineAtn The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all subcarriers during diagnostics mode and initialization. The value 2048 is a special value and indi…	tenth dBUnsigned32 Constraints: range: 0-1270 range: 2048-2048	.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.1
pdnAdslLineStatusAturLineAtn The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all subcarriers during diagnostics mode and initialization. The value 2048 is a special value and ind…	tenth dBUnsigned32 Constraints: range: 0-1270 range: 2048-2048	.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.2
pdnAdslLineStatusAtucSignalAtn The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all subcarriers during showtime. The value 2048 is a special value and indicates the line attenuation …	tenth dBUnsigned32 Constraints: range: 2048-2048 range: 0-1270	.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.3
pdnAdslLineStatusAturSignalAtn The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all subcarriers during showtime. The value 2048 is a special value and indicates the line attenuation …	tenth dBUnsigned32 Constraints: range: 0-1270 range: 2048-2048	.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.4
pdnAdslLineStatusAtucSnrMgn The upstream signal-to-noise ratio margin is the increase in dB of the noise power received at the ATU-R, such that the BER requirements are met for all upstream bearer channels. The value 2048 is a special value and…	tenth dBInteger32 Constraints: range: -640-630 range: 2048-2048	.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.5
pdnAdslLineStatusAturSnrMgn The downstream signal-to-noise ratio margin is the increase in dB of the noise power received at the ATU-C, such that the BER requirements are met for all upstream bearer channels. The value 2048 is a special value a…	tenth dBInteger32 Constraints: range: -640-630 range: 2048-2048	.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.6
pdnAdslLineStatusAtucMaxAttainableLineRate The maximum downstream net data rate currently attainable by the ATU-C transmitter and the ATU-R receiver.	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.7
pdnAdslLineStatusAturMaxAttainableLineRate The maximum upstream net data rate currently attainable by the ATU-R transmitter and the ATU-C receiver.	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.8
pdnAdslLineStatusAtucActAtp The total amount of transmit power delivered by the ATU-C at the U-R reference point, at the instant of the measurement. The value 2048 is a special value and indicates the parameter is out of range to be represented.	tenth dBmInteger32 Constraints: range: -310-310 range: 2048-2048	.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.9
pdnAdslLineStatusAturActAtp The total amount of transmit power delivered by the ATU-R at the U-R reference point, at the instant of the measurement. The value 2048 is a special value and indicates the parameter is out of range to be represented.	tenth dBmInteger32 Constraints: range: -310-310 range: 2048-2048	.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.10

This table contains current line status measurements.

pdnAdslLineSubCarStatusEntry row .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1

Each entry represents an interface.
i.e. a row in the ifTable.

Some objects in this table are only valid if a loop diagnostic
has successfully completed. Those objects will return a
noSuchName for a Get o…

Indexes

IF-MIBifIndex pdnAdslLineCarrierIndex

Column	Syntax	OID
pdnAdslLineCarrierIndex Identifies a row in the table based on a subcarrier. The subcarrier index ranges from 0 to (NSCds-1 or NSCus-1 (NSC is Number of Subcarriers) as specified in G.997.1 where NSCds is the higher subcarrier that can be t…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.1
pdnAdslLineSubCarAtucHlinPs The downstream linear representation, Hlin(f), of the Channel Characteristics Function, H(f). This value is only available after a loop diagnostic procedure. The special value -32768 indicates that no measurement c…	Integer32 Constraints: range: -32768-32767	.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.2
pdnAdslLineSubCarAturHlinPs The upstream linear representation, Hlin(f), of the Channel Characteristics Function, H(f). This value is only available after a loop diagnostic procedure. The special value -32768 indicates that no measurement cou…	Integer32 Constraints: range: -32768-32767	.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.3
pdnAdslLineSubCarAtucHlogMt The number of symbols used to measure downstream H(f) logarithmic measurement values. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to generate the associate parameter. It s…	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.4
pdnAdslLineSubCarAturHlogMt The number of symbols used to measure downstream H(f) logarithmic measurement values. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to generate the associate parameter. It s…	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.5
pdnAdslLineSubCarAtucQlnPs Downstream Quiet Line Noise. The special value 255 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise power Spectral Density (PSD) is out of the range t…	dBUnsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.6
pdnAdslLineSubCarAturQlnPs Upstream Quiet Line Noise. The special value 255 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise power spectral density (PSD) is out of the range to …	dBUnsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.7
pdnAdslLineSubCarAtucSnrPs Downstream Signal-to-Noise Ratio. The special value 255 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise power spectral density (PSD) is out of the ra…	dBUnsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.8
pdnAdslLineSubCarAturSnrPs Upstream Signal-to-Noise Ratio. The special value 255 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise power spectral density (PSD) is out of the rang…	dBUnsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.9
pdnAdslLineSubCarAtucBitsPs Downstream bits allocation.	BitsUnsigned32 Constraints: range: 0-15	.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.10
pdnAdslLineSubCarAturBitsPs Upstream bits allocation.	BitsUnsigned32 Constraints: range: 0-15	.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.11
pdnAdslLineSubCarAtucHlogPs The downstream logarithmic representation, Hlog(f), of the Channel Characteristics function, H(f), providing magnitude values. The special value 1023 indicates that no measurement could be done for the subcarrier b…	dBUnsigned32 Constraints: range: 0-1023	.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.12
pdnAdslLineSubCarAturHlogPs The upstream logarithmic representation, Hlog(f), of the Channel Characteristics function, H(f), providing magnitude values. The special value 1023 indicates that no measurement could be done for the subcarrier bec…	dBUnsigned32 Constraints: range: 0-1023	.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.13