PDN-ADSL-LINE-EXT-MIB

        This MIB module is a supplement to the ADSL-LINE-MIB and to the
ADSL-LINE-EXT-MIB, the `standard` MIBs, where additional objects
are needed to support ADSL modes or flavors not covered in the
`standard` MIBs.
        
At the time this MIB was defined, the IETF ADSL MIB Working does 
not have any work on the 'standard' MIBs planned and/or has not produced 
a schedule to address ADSL2/ADSL2plus needs. As a result, these objects may 
be a `temporary' solution until MIBs/Objects are defined or extended to 
meet the needs of ADSL2/ADSL2plus.
        
The following documents that should be referenced with respect
to this MIB:
[G.997.1]        ITU-T G997.1 `Physical layer management for Digital
                 Subscriber Line (DSL) transceivers', May 2003.
[G.991.1 Am 1]   ITU-T-G997.1 Amendment 1 `Physical layer management
                 for Digital Subscriber Line (DSL) transceivers 
                 Amendment 1', December 2003.
[OA 305]         Telenor Networks Specification, Specification 
                 Number OA 305, `Requirements for equipment to be 
                 connected to the local sub-loop in the access network 
                 of Telenor.  Equipment providing ADSL and PSTN or 
                 ISDN Basic Access Services, full unbundled access 
                 (service type EDF)', TN-NL-U-T/OA305/0101 2005, 
                 Edition 4.1, January 1, 2005.
[WT-090]         DSL Forum Working Text WT-090 `Protocol Independent
                 Object Model for Managing Next Generation ADSL
                 Technologies', Revision-1, September 2003.
[WT-090-4]       DSL Forum Working Text WT-090 `Protocol Independent
                 Object Model for Managing Next Generation ADSL
                 Technologies', Revision-4, June 2004.  
[RFC 2662]       Bathrick, G., Ly, F. `ADSL-LINE-MIB', August 1999.
[RFC 3440]       Ly, F., Bathrick, G. `ADSL-LINE-EXT-MIB', December 2002.
        
Generally the MIB objects are defined using G.997.1 and the MIB
objects are arranged using WT-090.
        
=====================================================================
==                                                                 ==
==            Copyright (C) 2004 Paradyne Corporation.             ==
==                                                                 ==
=====================================================================
    
Source file
PDN-ADSL-LINE-EXT-MIB
Last revised
Identity
pdnAdslLineExtMIB
Base OID
1.3.6.1.4.1.1795.2.24.2.6.24
Imported Objects
IF-MIB ifIndex
PDN-HEADER-MIB pdn-interfaces
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Gauge32 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the paradyne MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PDN-ADSL-LINE-EXT-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PDN-ADSL-LINE-EXT-MIB::pdnAdslLineExtMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-ADSL-LINE-EXT-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-ADSL-LINE-EXT-MIB::pdnAdslLineExtMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (78)
.1.3.6.1.4.1.1795.2.24.2.6.24
.1.3.6.1.4.1.1795.2.24.2.6.24.0
.1.3.6.1.4.1.1795.2.24.2.6.24.1
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.1
Enumeration
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.10
dBUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.11
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.2
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.3
Enumeration
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.4
OctetString
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.5
Bits
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.6
secondsUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.7
secondsUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.8
dBUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.9
.1.3.6.1.4.1.1795.2.24.2.6.24.1.2
.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1
OctetString
.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.1
.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.2
OctetString
.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.3
OctetString
.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.4
OctetString
.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.5
.1.3.6.1.4.1.1795.2.24.2.6.24.1.3
.1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1
OctetString
.1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1.1
Enumeration
.1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1.2
.1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1.3
OctetString
.1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1.4
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1
OctetString
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.1
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.2
tenth dBm/HzInteger32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.3
tenth dBm/HzInteger32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.4
tenth dBmUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.5
tenth dBmUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.6
tenth dBmInteger32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.7
.1.3.6.1.4.1.1795.2.24.2.6.24.1.5
.1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1
OctetString
.1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1.1
.1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1.2
.1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1.3
Enumeration
.1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1.4
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1
tenth dBUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.1
tenth dBmInteger32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.10
tenth dBUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.2
tenth dBUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.3
tenth dBUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.4
tenth dBInteger32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.5
tenth dBInteger32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.6
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.7
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.8
tenth dBmInteger32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.9
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.1
BitsUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.10
BitsUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.11
dBUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.12
dBUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.13
Integer32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.2
Integer32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.3
Unsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.4
Unsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.5
dBUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.6
dBUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.7
dBUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.8
dBUnsigned32
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.9
.1.3.6.1.4.1.1795.2.24.2.6.24.2
.1.3.6.1.4.1.1795.2.24.2.6.24.3
.1.3.6.1.4.1.1795.2.24.2.6.24.3.1
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.2
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.3
Dependencies (9) 6 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (1)
Bits
ansit1413(0)
etsi(1)
q9921PotsNonOverlapped(2)
q9921PotsOverlapped(3)
q9921IsdnNonOverlapped(4)
q9921isdnOverlapped(5)
q9921tcmIsdnNonOverlapped(6)
q9921tcmIsdnOverlapped(7)
q9922potsNonOverlapeed(8)
q9922potsOverlapped(9)
q9922tcmIsdnNonOverlapped(10)
q9922tcmIsdnOverlapped(11)
q9921tcmIsdnSymmetric(12)
reservedBit13(13)
reservedBit14(14)
reservedBit15(15)
reservedBit16(16)
reservedBit17(17)
q9923potsNonOverlapped(18)
q9923potsOverlapped(19)
q9923isdnNonOverlapped(20)
q9923isdnOverlapped(21)
reservedBit22(22)
reservedBit23(23)
q9924potsNonOverlapped(24)
q9924potsOverlapped(25)
reservedBit26(26)
reservedBit27(27)
q9923DigitalNonOverlappedI(28)
q9923DigitalOverlappedI(29)
q9923DigitalNonOverlappedJ(30)
q9923DigitalOverlappedJ(31)
q9924DigitalNonOverlappedI(32)
q9924DigitalOverlappedI(33)
q9923ReachExtOverPotsMode1L(34)
q9923ReachExtOverPotsMode2L(35)
q9923ReachExtOverPotsMode3L(36)
q9923ReachExtOverPotsMode4L(37)
q9923ExtUpOverPotsNonOverlappedM(38)
q9923ExtUpOverPotsOverlappedM(39)
q9925potsNonOverlapped(40)
q9925potsOverlapped(41)
q9925isdnNonOverlapped(42)
q9925isdnOverlapped(43)
reserved44(44)
reserved45(45)
q9925DigitalNonOverlappedI(46)
q9925DigitalOverlappedI(47)
q9925DigitalNonOverlappedJ(48)
q9925OverlappedJ(49)
q9925ExtUpOverPotsNonOverlappedM(50)
q9925ExtUpOverPotsOverlappedM(51)
reservedBit52(52)
reservedBit53(53)
reservedBit54(54)
reservedBit55(55)
Conformance Groups (17)
A collection of objects providing extended
configuration information about an ADSL Line.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.1
A collection of objects providing transmission
spectrum and power spectral density related profiles.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.2
A collection of objects providing a mapping from an entry
into the ADSL Line Spectrum Table to a profile defining a
specific set of power spectral density settings.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.3
A collection of objects providing specific power spectral
density settings based on a named profile.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.4
A collection of objects providing the ability for an
administrator to mask out specific subcarriers in
the downstream or the upstream direction.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.5
Total maximum aggregate transmit power reduction in L2.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.6
Line attenuation during diagnostic mode and initialization.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.7
Line attenuation during showtime.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.8
SNR margin ratio.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.9
Current maximum attainable net data rate.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.10
Actual aggregate transmit power.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.11
Linear representation of the Channel
Characteristics function for a subcarrier on a line.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.12
Logarithmic measurement time of the Channel
Characteristics function for a subcarrier on a line.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.13
Quiet Line Noise for a subcarrier on a line.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.14
Signal-to-Noise Ratio for a subcarrier on a line.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.15
Bits allocation for a subcarrier on a line.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.16
Logarithmic representation of the Channel Characteristics
function for a subcarrier on a line.
.1.3.6.1.4.1.1795.2.24.2.6.24.3.2.1.17
Compliance Statements (1)

OID .1.3.6.1.4.1.1795.2.24.2.6.24.3.1.1
The compliance statement for pdnAdslLineMIB entities which
implement the pdnAdslLineMIB.
Required groups
optional pdnAdslLineExtGroup This group associates objects related to the DSL line
and is mandatory only for those entities which implement ADSL2
or ADSL2plus capabilities and providing that no IETF standard
MIB exists that has objects allowing ADSL2 or ADSL2plus
capabilities to be identified and controlled.
optional pdnAdslLineSpectrumGroup This group associates objects related to spectrum and power
spectral configurations and is mandatory only for those
entities which implement ADSL2 or ADSL2plus capabilities and
providing that no IETF standard MIB exists that has objects
allowing ADSL2 or ADSL2plus capabilities to be identified and
controlled.
optional pdnAdslModeSpecificPsdGroup This group associates objects related to spectrum and power
spectral configurations that are specific to a particular
type of ADSL mode is mandatory only for those entities which
implement ADSL2 or ADSL2plus capabilities and providing that
no IETF standard MIB exists that has objects allowing
ADSL2 or ADSL2plus capabilities to be identified and controlled.
optional pdnAdslPsdGroup This group associates objects related to configuring profiles
for power spectral density setting and is mandatory only for
those entities which implement ADSL2 or ADSL2plus capabilities
and providing that no IETF standard MIB exists that has objects
allowing ADSL2 or ADSL2plus capabilities to be identified and
controlled.
optional pdnAdslCarMaskGroup This group associates objects related to defining subcarriers
to be masked in the downstream direction.
optional pdnAdslLineL2AtprtGroup This group adds an object for total maximum aggregate transmit
power reduction in L2.
optional pdnAdslLineStatusLineAtnGroup This group associates status objects related to line
attenuation during diagnostic mode and initialization.
optional pdnAdslLineStatusSignalAtnGroup This group associates status objects related to line
attenuation during showtime.
optional pdnAdslLineStatusSnrMgnGroup This group associates status objects related to SNR margin
ratio.
optional pdnAdslLineStatusMaxattainableLineRateGroup This group associates status objects related to the
current maximum attainable net data rate.
optional pdnAdslLineStatusActAtpGroup This group associates status objects related to the
actual aggregate transmit power.
optional pdnAdslLineSubCarStatusHlinGroup This group associates the status objects related to the
linear representation of the Channel Characteristics
Function on a per-subcarrier basis for a line.
optional pdnAdslLineSubCarStatusHlogMtGroup This group associates the status objects related to the
logarithmic measurement time on a per-subcarrier basis
for the line
optional pdnAdslLineSubCarStatusQlnGroup This group associates the status objects related to the
Quiet Line Noise on a per-subcarrier basis for the line.
optional pdnAdslLineSubCarStatusSnrGroup This group associates the status objects related to the
Signal-to-Noise Ratio on a per-subcarrier basis for the
line.
optional pdnAdslLineSubCarStatusBitsGroup The group associates the status objects related to the
bits allocation on a per-subcarrier basis for the line.
optional pdnAdslLineSubCarStatusHlogGroup The group associates the status objects related to the
logarithmic representation of the Channel Characteristics
function on a per-subcarrier basis for the line.