NEWTEC-ANTENNA-CONTROLLER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
23

ntcAntCtrlCfgTable

table
.1.3.6.1.4.1.5835.5.2.5700.1.1.1 · 1 row entry · 12 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcAntCtrlCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-ANTENNA-CONTROLLER-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-ANTENNA-CONTROLLER-MIB::ntcAntCtrlCfgTable' 
A table containing the ntcAntCtrlCfg
ntcAntCtrlCfgEntry row .1.3.6.1.4.1.5835.5.2.5700.1.1.1.1
A conceptual row of the ntcAntCtrlCfgTable.
Indexes
Column Syntax OID
ntcAntCtrlCfgControlId
The id of the controller instance
Enumeration
Enumerated Values:
1control1
2control2
3control3
4control4
 .1.3.6.1.4.1.5835.5.2.5700.1.1.1.1.1
ntcAntCtrlCfgEnable
Enable or disable the corresponding AMIP controller channel.
NEWTEC-TC-MIBNtcEnabler/w
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.5700.1.1.1.1.2
ntcAntCtrlCfgIpAddress
IP address to connect to Antenna controller. Regular expression :
(?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5835.5.2.5700.1.1.1.1.3
ntcAntCtrlCfgPort
Port number to connect to Antenna controller.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.5835.5.2.5700.1.1.1.1.4
ntcAntCtrlCfgSatLong
Satellite Longitude
deg.FLOAT-TC-MIBFloat32TCr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5835.5.2.5700.1.1.1.1.5
ntcAntCtrlCfgSatLatVar
Satellite Latitude Variance
deg.FLOAT-TC-MIBFloat32TCr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5835.5.2.5700.1.1.1.1.6
ntcAntCtrlCfgSatSkew
Satellite Polarity Skew
deg.FLOAT-TC-MIBFloat32TC
Type Constraints:
range: 4
 .1.3.6.1.4.1.5835.5.2.5700.1.1.1.1.7
ntcAntCtrlCfgRxPol
Rx Polarization.
Enumerationr/w
Enumerated Values:
0lefthanded
1righthanded
3horizontal
4vertical
 .1.3.6.1.4.1.5835.5.2.5700.1.1.1.1.8
ntcAntCtrlCfgTxPol
Tx Polarization.
Enumerationr/w
Enumerated Values:
0lefthanded
1righthanded
3horizontal
4vertical
 .1.3.6.1.4.1.5835.5.2.5700.1.1.1.1.9
ntcAntCtrlCfgRxLoFreq
Rx LO conversion frequency
kHzUnsigned32r/w
Constraints:
range: 0-42000000
 .1.3.6.1.4.1.5835.5.2.5700.1.1.1.1.10
ntcAntCtrlCfgTxLoFreq
Tx LO conversion frequency
kHzUnsigned32r/w
Constraints:
range: 0-42000000
 .1.3.6.1.4.1.5835.5.2.5700.1.1.1.1.11
ntcAntCtrlCfgTxMaxSkew
Short Axis Max Skew
deg.FLOAT-TC-MIBFloat32TCr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.5835.5.2.5700.1.1.1.1.12

ntcAntCtrlMonTable

table
.1.3.6.1.4.1.5835.5.2.5700.1.2.1 · 1 row entry · 8 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcAntCtrlMonTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-ANTENNA-CONTROLLER-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-ANTENNA-CONTROLLER-MIB::ntcAntCtrlMonTable' 
Monitoring table
ntcAntCtrlMonEntry row .1.3.6.1.4.1.5835.5.2.5700.1.2.1.1
A conceptual row of the ntcAntCtrlMonTable.
Indexes
Column Syntax OID
ntcAntCtrlMonControlId
The id of the controller instance
Enumeration
Enumerated Values:
1control1
2control2
3control3
4control4
 .1.3.6.1.4.1.5835.5.2.5700.1.2.1.1.1
ntcAntCtrlInterval
The keepalive interval requested by the Listener.
sUnsigned32
Constraints:
range: 0-9999999
 .1.3.6.1.4.1.5835.5.2.5700.1.2.1.1.2
ntcAntCtrlAntStatus
Antenna Functional Status.
Enumeration
Enumerated Values:
0unknown
1ok
2failed
 .1.3.6.1.4.1.5835.5.2.5700.1.2.1.1.3
ntcAntCtrlTxAllowed
Tx Allowed Status.
Enumeration
Enumerated Values:
0unknown
1on
2off
 .1.3.6.1.4.1.5835.5.2.5700.1.2.1.1.4
ntcAntCtrlLatitude
Antenna Geo latitude coordinate
deg.FLOAT-TC-MIBFloat32TC
Type Constraints:
range: 4
 .1.3.6.1.4.1.5835.5.2.5700.1.2.1.1.5
ntcAntCtrlLongitude
Antenna Geo longitude coordinate
deg.FLOAT-TC-MIBFloat32TC
Type Constraints:
range: 4
 .1.3.6.1.4.1.5835.5.2.5700.1.2.1.1.6
ntcAntCtrlTxMsg
The number of transmitted AMIP messages
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.5700.1.2.1.1.7
ntcAntCtrlRxMsg
The number of received AMIP messages
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5835.5.2.5700.1.2.1.1.8

ntcAntCtrlAlarmStatsTable

table
.1.3.6.1.4.1.5835.5.2.5700.1.3.1 · 1 row entry · 3 columns
Open in standard view
Uses the newtec variant from /opt/observium/mibs/newtec.
Command help
Walk ntcAntCtrlAlarmStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NEWTEC-ANTENNA-CONTROLLER-MIB' -M '/opt/observium/mibs/newtec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NEWTEC-ANTENNA-CONTROLLER-MIB::ntcAntCtrlAlarmStatsTable' 
Alarm Status table
ntcAntCtrlAlarmStatsEntry row .1.3.6.1.4.1.5835.5.2.5700.1.3.1.1
A conceptual row of the ntcAntCtrlAlarmStatsTable.
Indexes
Column Syntax OID
ntcAntCtrlAlarmStatsControlId
The id of the controller instance
Enumeration
Enumerated Values:
1control1
2control2
3control3
4control4
 .1.3.6.1.4.1.5835.5.2.5700.1.3.1.1.1
ntcAntCtrlCommErrorStat
This alarm is raised upon communication error with Antenna Controller. This
variable indicates the current status of the alarm.
NEWTEC-TC-MIBNtcAlarmState
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.5700.1.3.1.1.2
ntcAntCtrlAntFailureStat
This alarm is raised when the Antenna (controller) is non-functional, due to
invalid configuration or equipment failure. This variable indicates the
current status of the alarm.
NEWTEC-TC-MIBNtcAlarmState
Type Values:
0off
1on
 .1.3.6.1.4.1.5835.5.2.5700.1.3.1.1.3