NETI-ETH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
223

ethDeviceTable

table
.1.3.6.1.4.1.2928.2.2.1.1.1 · 1 row entry · 30 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethDeviceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethDeviceTable' 
Table that represents Ethernet capable devices.  The table is
automatically populated with entries representing all mounted
Ethernet devices.
ethDeviceEntry row .1.3.6.1.4.1.2928.2.2.1.1.1.1
An entry representing one device (board).
Indexes
Column Syntax OID
ethDevIndex
An index in the table. The index is equal to the board
position in the node. The index is maintained across reboots
of the managed system.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.1
ethDevRowStatus
The following values are supported:

active(1). The object always reads active.

destroy(6). All configurations for the device are deleted.
If the physical device exists, then a new default
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.2
ethDevName
The textual name of the device. The value of this object
should be the name of the device as assigned by the local
device and should be suitable for use in commands entered at
the device's `console'.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.3
ethDevContainerName
The name of the container where the physical device is mounted.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.4
ethDevProductName
The name of the product. The value of this object should be
the name of the device as printed on the front panel or
similar.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.5
ethDevStatus
The status of the device, indicating if the board is plugged
in or not.

present(1). The device is present and functional.

absent(2). The device is not present.

mismatch(3). A…
Enumeration
Enumerated Values:
1present
2absent
3mismatch
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.6
ethDevCapJumboFrames
The Jumbo Frames capabilities of forwarding functions on the
device. Describes all supported values of the Jumbo Frames
setting. See ethFwdJumboFrames.
Bits
Enumerated Values:
0on
1off
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.7
ethDevCapMaxAgingTime
The maximum aging time for dynamically learned forwarding
information for forwarding functions on the device. Zero
(0) if the device does not allow the value to be set. See
ethFwdAgingTime.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.8
ethDevCapMACMode
The MAC mode capabilities of forwarding functions on the
device. Describes all supported values of the MAC modes
setting. See ethFwdMACMode.
Bits
Enumerated Values:
0auto
1mac
2nomac
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.9
ethDevCapSpanningTree
The spanning tree capabilities of forwarding functions on the
device. Describes all supported values of the spanning tree
settings. If spanning tree is not supported, then the value
is `forward(1)'. See ethFwdSpannin…
Bits
Enumerated Values:
0auto
1forward
2drop
3process
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.10
ethDevCapVLANMode
The VLAN mode capabilities of forwarding functions on the
device. Describes all supported values of the VLAN mode
settings. See ethFwdVLANMode.
Bits
Enumerated Values:
0transparent
1customer
2provider
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.11
ethDevCapAdvertisedDuplex
Supported values for the duplex setting of a physical
interface on the device. See dot3AdvertisedDuplex.
AdvertisedDuplex
Type Values:
0auto
1fullDuplex
2halfDuplex
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.12
ethDevCapAdvertisedFlowControl
Supported values for the flow control setting of a physical
interface on the device. See dot3AdvertisedFlowControl.
AdvertisedFlowControl
Type Values:
0auto
1pause
2asmDir
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.13
ethDevCapAcceptableFrameType
The frame types capabilities of interfaces on the device.
Describes all supported values of the acceptable frame type
setting. See ethIfAcceptableFrameTypes.
Bits
Enumerated Values:
0all
1vlanTagged
2untagged
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.14
ethDevCapDefaultEthernetPriority
The range of allowed values for Ethernet priority of
interfaces on the device. See
ethIfDefaultEthernetPriority. The object consists of two
octets, where the first octet represents the lowest allowed
value and the sec…
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.15
ethDevCapLearning
The learning capabilities of forwarding functions on the
device. Describes all supported values of the learning
setting. See ethIfLearning.
Bits
Enumerated Values:
0on
1off
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.16
ethDevCapTransmittedFrameTypeETS
The allowed values of the transmitted frame type on an
Ethernet Transport Service Trail Termination Point, ETS TTP.
See ethIfTransmittedFrameType. Note that the interface type
can be determined by examine ethIfType.
Bits
Enumerated Values:
1vlanTagged
2untagged
3legacy
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.17
ethDevCapTransmittedFrameTypeDot3
The allowed values of the transmitted frame type on an dot3
interface. See ethIfTransmittedFrameType. Note that the
interface type can be determined by examine ethIfType.
Bits
Enumerated Values:
1vlanTagged
2untagged
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.18
ethDevCapMaxMaxQueueOctets
The maximum value in octets possible to set for the maximum
queue size for queues on the device. See
ethIfQueueMaxOctets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.19
ethDevCapMaxMaxQueueFramesdeprecated
The maximum value in frames allowed to set for the maximum
queue size for queues on the device. See
ethIfQueueMaxFrames.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.20
ethDevCapMaxTrafficClass
The maximum number of traffic classes supported by the
device. Traffic classes are identified by numbers starting
from 0 to, but not including, this value.
TrafficClass
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.21
ethDevEtsNextIndex
The value of the next available index (ethIfIndex) in the
ethEtsTable for this device.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.22
ethDevFwdFuncNextIndex
The value of the next available index (ethFwdIndex) in the
ethFwdFuncTable for this device.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.23
ethDevCapPerformanceMonitoring
Indicates how the device supports performance monitoring.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.24
ethDevCapConfigurableFaultMgmt
Indicates how the device supports configurable fault
management.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.25
ethDevIfgFirstIndex
The value of the first allowed index (ethIfIndex) in the
ethIfgTable for this device.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.26
ethDevIfgNextIndex
The value of the next available index (ethIfIndex) in the
ethIfgTable for this device.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.27
ethDevCapDropPrecedenceLevels
The number of different drop precedence (DP) levels that
this devices supports. The DP levels are numbered from 0 to
(dropPrecedenceLevels - 1)
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.28
ethDevCapDropProbabilityFunctions
The drop probability functions supported for this device.
Bits
Enumerated Values:
0taildrop
1wred
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.29
ethDevFailure
A string describing the configuration or error status of the
device. The string is the empty string if the configuration
is correct, otherwise a message describing the error.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.1.1.1.30

ethFwdFuncTable

table
.1.3.6.1.4.1.2928.2.2.1.2.2 · 1 row entry · 45 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethFwdFuncTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethFwdFuncTable' 
Table of forwarding functions.
ethFwdFuncEntry row .1.3.6.1.4.1.2928.2.2.1.2.2.1
An entry representing one forwarding function.
Indexes
Column Syntax OID
ethFwdIndex
An index representing the forwarding function on the device.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.1
ethFwdRowStatus
See SNMPv2-TC. The maximum number of forwarding functions is
limited by the type of device. This is described per device
in ethDevCapMaxForwardingFunctions. The following values
are supported:

active(1)…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.2
ethFwdName
The textual name of the forwarding function. The value of
this object should be suitable for use in commands entered at
the device's `console'.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.3
ethFwdCustomerId
An identification number representing the customer or user
using the forwarding function. The value could be used for
e.g. Charge Data Records. The value zero (0) indicates that
no specific customer is associated with …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.4
ethFwdPurpose
A string representing the purpose of the forwarding
function. The string is for administrative purpose.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.5
ethFwdJumboFrames
Specifies how the forwarding function shall handle Jumbo
frames:

on(1). Jumbo frames are forwarded as any standard Ethernet
frame.

off(2). Jumbo frames are discarded upon reception.
…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.6
ethFwdMACMode
Specifies how the forwarding function shall handle unicast
frames when it does not know what interface to use for
reaching a destination.

auto(1). Equivalent to `mac(2)' if the forwarding function
is con…
Enumerationr/w
Enumerated Values:
1auto
2mac
3nomac
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.7
ethFwdCurrentMACMode
Describes the currently active MAC mode, see ethFwdMACMode.
Enumeration
Enumerated Values:
2mac
3nomac
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.8
ethFwdSpanningTree
auto(1). If the device does not implement the spanning-tree
protocol, or if exactly two interfaces are connected to the
forwarding function, then it will act as if `forward(2)' has
been specified. Otherwise, it will act…
Enumerationr/w
Enumerated Values:
1auto
2forward
3drop
4process
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.9
ethFwdVLANMode
transparent(1). Ignore VLAN tags on received frames. VLAN
tags are not added nor removed from the frames. If a frame
has a VLAN tag, then it is retained. If a frame does not have
a VLAN tag, then no tag is added.
…
Enumerationr/w
Enumerated Values:
1transparent
2customer
3provider
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.10
ethFwdAgingTime
The timeout period in seconds for aging out dynamically
learned forwarding information. The value 0 means that
aging is disabled and that the learned entries are not
removed from the lookup table. See ethDevCapMaxAgin…
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.11
ethFwdFailure
A string describing the configuration or error status of the
forwarding function. The string is the empty string if the
configuration is correct, otherwise a message describing the
error.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.12
ethFwdLastChange
The value of sysUpTime at the time when the operational
state or any configuration was last changed on this
forwarding function.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.13
ethFwdPropagateFaults
Propagate faults to all interfaces belonging to this
forwarding function.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.14
ethFwdReservedAddr0180C2000002
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.15
ethFwdReservedAddr0180C2000003
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.16
ethFwdReservedAddr0180C2000004
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.17
ethFwdReservedAddr0180C2000005
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.18
ethFwdReservedAddr0180C2000006
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.19
ethFwdReservedAddr0180C2000007
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.20
ethFwdReservedAddr0180C2000008
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.21
ethFwdReservedAddr0180C2000009
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.22
ethFwdReservedAddr0180C200000A
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.23
ethFwdReservedAddr0180C200000B
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.24
ethFwdReservedAddr0180C200000C
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.25
ethFwdReservedAddr0180C200000D
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.26
ethFwdReservedAddr0180C200000E
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.27
ethFwdReservedAddr0180C200000F
Configuration of how to process reserved MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.28
ethFwdCurrentStpMode
Indicates the current STP mode as, as a result of the
configured value in ethFwdSpanningTree. Unless
ethFwdSpannigTree is `auto(1), then this always reads the
same value as that object.
Enumeration
Enumerated Values:
2forward
3drop
4process
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.29
ethFwdMrpAddr0180C2000020
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.30
ethFwdMrpAddr0180C2000021
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.31
ethFwdMrpAddr0180C2000022
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.32
ethFwdMrpAddr0180C2000023
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.33
ethFwdMrpAddr0180C2000024
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.34
ethFwdMrpAddr0180C2000025
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.35
ethFwdMrpAddr0180C2000026
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.36
ethFwdMrpAddr0180C2000027
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.37
ethFwdMrpAddr0180C2000028
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.38
ethFwdMrpAddr0180C2000029
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.39
ethFwdMrpAddr0180C200002A
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.40
ethFwdMrpAddr0180C200002B
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.41
ethFwdMrpAddr0180C200002C
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.42
ethFwdMrpAddr0180C200002D
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.43
ethFwdMrpAddr0180C200002E
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.44
ethFwdMrpAddr0180C200002F
Configuration of how to process Multiple Registration
Protocol (MRP) MAC address.
FrameProcessr/w
Type Values:
0notSupported
1drop
2forward
 .1.3.6.1.4.1.2928.2.2.1.2.2.1.45

ethFwdDiffservTable

table
.1.3.6.1.4.1.2928.2.2.1.2.3 · 1 row entry · 2 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethFwdDiffservTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethFwdDiffservTable' 
The table maps differentiated service code points (DSCP) to
flow groups.
ethFwdDiffservEntry row .1.3.6.1.4.1.2928.2.2.1.2.3.1
An entry represents the mapping of one DSCP to one flow
group for an interface.
Indexes
Column Syntax OID
ethFwdDiffservIndex
An index representing the differentiated service code point
(DSCP). For each forwarding function, the table contains 64
rows, numbered from 0 to 63 representing DSCP bit pattern
'000000' through '111111'.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.2928.2.2.1.2.3.1.1
ethFwdDiffservFlowGroup
Specifies which flow group that the differentiated service
code point (DSCP) shall be mapped to.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2928.2.2.1.2.3.1.2

ethFwdRstpTable

table
.1.3.6.1.4.1.2928.2.2.1.2.4 · 1 row entry · 16 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethFwdRstpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethFwdRstpTable' 
The table contains Rapid Spanning Tree Protocol (RSTP)
specific configurations and data for forwarding
functions. If a forwarding function does not support RSTP,
then the table will not hold an entry for that forwarding
function.
ethFwdRstpEntry row .1.3.6.1.4.1.2928.2.2.1.2.4.1
An entry represents Rapid Spanning Tree Protocol (RSTP)
related data for one forwarding function.
Indexes
Column Syntax OID
ethFwdRstpBridgeIdentifier
The unique identifier for this bridge.
BridgeIdentifier
Type Constraints:
range: 8
 .1.3.6.1.4.1.2928.2.2.1.2.4.1.1
ethFwdRstpPriority
The local bridge priority. The value must be set in
increments of 4096.
Integer32r/w
Constraints:
range: 0-61440
 .1.3.6.1.4.1.2928.2.2.1.2.4.1.2
ethFwdRstpTimeSinceTopologyChange
The time in 1/100 seconds since the last topology change.
centi-secondsTimeout .1.3.6.1.4.1.2928.2.2.1.2.4.1.3
ethFwdRstpTopologyChangeCount
The total number of topology changes detected by this bridge
since the management entity was last reset or initialized.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.2.4.1.4
ethFwdRstpTopologyChange
Set to `true(1)' when a topology change is in progress.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.2.4.1.5
ethFwdRstpDesignatedRoot
The bridge identifier of the root of the spanning tree, as
determined by the Spanning Tree Protocol, as executed by
this bridge. This value is used as the Root Identifier
parameter in all Configuration Bridge PDUs orig…
BridgeIdentifier
Type Constraints:
range: 8
 .1.3.6.1.4.1.2928.2.2.1.2.4.1.6
ethFwdRstpRootPathCost
The cost of the path to the root as seen from
this bridge.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2928.2.2.1.2.4.1.7
ethFwdRstpRootPortName
The name of the interface that offers the lowest cost path
from this bridge to the root bridge.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.2.4.1.8
ethFwdRstpMaxAge
The maximum age of Spanning Tree Protocol information
learned from the network on any port before it is discarded,
in units of hundredths of a second. This is the actual
value that this bridge is currently using.
centi-secondsTimeout .1.3.6.1.4.1.2928.2.2.1.2.4.1.9
ethFwdRstpHelloTime
The amount of time between the transmission of Configuration
bridge PDUs by this node on any port when it is the root of
the spanning tree, or trying to become so, in units of
hundredths of a second. This is the actual…
centi-secondsTimeout .1.3.6.1.4.1.2928.2.2.1.2.4.1.10
ethFwdRstpForwardDelay
The root bridge forward delay parameter, in units of
hundredths of a second.
centi-secondsTimeout .1.3.6.1.4.1.2928.2.2.1.2.4.1.11
ethFwdRstpBridgeMaxAge
The value that all bridges use for MaxAge when this bridge
is acting as the root. An agent may return a badValue error
if a set is attempted to a value that is not a whole number
of seconds, or it may truncate the valu…
centi-secondsInteger32r/w
Constraints:
range: 600-4000
 .1.3.6.1.4.1.2928.2.2.1.2.4.1.12
ethFwdRstpBridgeHelloTime
The value that all bridges use for HelloTime when this
bridge is acting as the root. An agent may return a
badValue error if a set is attempted to a value that is not
a whole number of seconds, or it may truncate the v…
centi-secondsInteger32r/w
Constraints:
range: 100-200
 .1.3.6.1.4.1.2928.2.2.1.2.4.1.13
ethFwdRstpBridgeForwardDelay
The value that all bridges use for ForwardDelay when this
bridge is acting as the root. An agent may return a
badValue error if a set is attempted to a value that is not
a whole number of seconds, or it may truncate th…
Integer32r/w
Constraints:
range: 400-3000
 .1.3.6.1.4.1.2928.2.2.1.2.4.1.14
ethFwdRstpTxHoldCount
The local bridge transmit hold count parameter.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2928.2.2.1.2.4.1.15
ethFwdRstpForceVersion
Force the spanning tree protocol version to use for this
bridge:

stp(1). STP compatibility mode. Causes an RSTP Bridge to
use STP compatible BPDUs and timer values on all Bridge
Ports. Rapid transitions…
Enumerationr/w
Enumerated Values:
1stp
2rstp
 .1.3.6.1.4.1.2928.2.2.1.2.4.1.16

ethIfTable

table
.1.3.6.1.4.1.2928.2.2.1.3.2 · 1 row entry · 47 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethIfTable' 
Table containing all interfaces, both physical, logical for
use with Ethernet Transport Service, and interface groups
for use with 1+1 protection.
ethIfEntry row .1.3.6.1.4.1.2928.2.2.1.3.2.1
An entry representing one interface or interface group.

If the interface is a physical interface, a conceptual row
also exists for the interface in the ethDot3Table. The
management system ensures that all …
Indexes
Column Syntax OID
ethIfIndex
An index for the interface. The index is maintained across
restarts of the managed system. The management system may
require that the value of this object is within a certain
value range depending of the type of inter…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.1
ethIfIfIndex
This variable uniquely identifies the interface in the
ifTable. The value is 0 if the interface is not present in
the ifTable.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.2
ethIfName
The name of the interface. If the interface is a physical
interface, it is named `eth<device>:<port>' where <device>
is the value of ethDevIndex, and <port> is the value of
ethIfIndex. If the interface is an Ethernet …
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.3
ethIfType
The type of interface. The value `unknown(1)' is presented
if required hardware is missing, or if it otherwise is not
possible to determined the type of interface.
EthInterfaceType
Type Values:
0auto
1unknown
2bETS
3b100baseTX
4b1000baseSX
5b1000baseLX
6b1000baseT
7bETSGroup
8b10GbaseSR
9b10GbaseLR
10b10GbaseLRM
11b10GbaseER
12b10GbaseZR
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.4
ethIfCustomerId
An identification number representing the customer or user
using the interface. The value could be used for e.g. Charge
Data Records. The value zero (0) indicates that no specific
customer is associated with the interf…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.5
ethIfPurpose
A string representing the purpose of the interface. The
string is for administrative purpose.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.6
ethIfAdminStatus
The administrative state of the interface. If the interface
represents a Ethernet Transport Service Trail Termination
Point (ETS TTP), then the variable controls the desired
state of the connections.

up(1…
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.7
ethIfOperStatus
The actual operational state of the interface. The value
should normally follow the administrative state
(ethIfAdminStatus).

up(1). The interface is up and operational. If the
interface is representing …
Enumeration
Enumerated Values:
1up
2down
5dormant
6notPresent
9partial
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.8
ethIfFailure
A string describing the configuration or error status of the
interface. The string is the empty string if the
configuration is correct, otherwise a message describing the
error.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.9
ethIfForwardingFunction
The index (ethFwdIndex) in the ethFwdFuncTable of the
forwarding function that this interface belongs to. The
value -1 denotes that the interface does not belong to any
forwarding function. If the referenced forwardin…
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.10
ethIfAcceptableFrameTypes
all(1). All frames, regardless of whether they have a VLAN
tag or not, shall be accepted.

vlanTagged(2). Only frames that contain a non-zero VLAN id
in the VLAN tag shall be accepted.

untag…
Enumerationr/w
Enumerated Values:
1all
2vlanTagged
3untagged
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.11
ethIfTransmittedFrameType
vlanTagged(2). Forwarded frames are tagged according to
setting on ethFwdVLANMode.

untagged(3). VLAN tags on forwarded frames are removed
according to setting of ethFwdVLANMode.

legacy(4). …
Enumerationr/w
Enumerated Values:
2vlanTagged
3untagged
4legacy
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.12
ethIfDefaultVLAN
If an untagged frame is received on this interface, it will
be tagged with a VLAN having a VLAN id as specified in this
variable. The VLAN tag will be a customer or service tag as
set on ethFwdVLANMode, or ignored if s…
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.13
ethIfDefaultEthernetPriority
Specifies the Ethernet priority assigned to a frame that has
arrived via this port, and that does not have a VLAN tag.

Priority will only be assigned to the frame if it should be
sent out tagged on anothe…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.14
ethIfPriorityMode
Selects the method to use when assigning a flow group to a
frame that arrives via this interface:

ethernet(1). The user bits are used.

diffserv(2). The differential service code point (DSCP…
Enumerationr/w
Enumerated Values:
1ethernet
2diffserv
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.15
ethIfDefaultTrafficClass
Frames that do have any priority information are assigned
this traffic class. See ethDevCapMaxTrafficClass for max
value supported by the device.
TrafficClassr/w
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.16
ethIfFlowGroupMap
Represents a flow group to traffic class map. The octet
string consists of eight octets, one for each flow group.
The position in the string represents the flow group, where
the first (left-most) position represents fl…
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.17
ethIfLearning
Specifies if MAC learning is enabled on the interface.

on(1). MAC learning is enabled. The forwarding function
learns what interface to use for a destination by looking at
the source MAC address in recei…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.18
ethIfInSpeed
An estimate of the interface's current input bandwidth in
bits per second. If the interface is a physical interface
(represented in ethDot3Table), then this value is the same
as ethDot3ActiveSpeed. If the interface re…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.19
ethIfInHighSpeed
An estimate of the interface's current input bandwidth in
units of 1,000,000 bits per second. If this object reports a
value of `n' then the speed of the interface is somewhere in
the range of `n-500,000' to `n+499,999…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.20
ethIfOutSpeed
An estimate of the interface's current output bandwidth in
bits per second. If the interface is a physical interface
(represented in ethDot3Table), then this value is the same
as ethDot3ActiveSpeed. If the interface r…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.21
ethIfOutHighSpeed
An estimate of the interface's current output bandwidth in
units of 1,000,000 bits per second. If this object reports a
value of `n' then the speed of the interface is somewhere in
the range of `n-500,000' to `n+499,99…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.22
ethIfVLANNextIndex
Next available value of ethIfVLANSetIndex in
ethIfVLANSetTable for this interface.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.23
ethIfLastChange
The value of sysUpTime at the time when the operational
state or any configuration was last changed on this
interface.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.24
ethIfSrcPmReference
A reference to an object that presents performance data for
the source side of the interface. The object is not part of
this MIB.
SNMPv2-TCRowPointer
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.25
ethIfSnkPmReference
A reference to an object that presents performance data for
the sink side of the interface. The object is not part of
this MIB.
SNMPv2-TCRowPointer
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.26
ethIfSrcDegThreshold
Threshold in number of dropped frames per second for
generating a degraded second. A degraded second is
generated when the number of dropped frames are equal or
larger than the this threshold. A value of 0 disables
de…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.27
ethIfSnkDegThreshold
Threshold in number of dropped frames per second for
generating a degraded second. A degraded second is
generated when the number of dropped frames are equal or
larger than the this threshold. A value of 0 disables
de…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.28
ethIfSrcDegPeriod
Number of consecutive bad seconds that are needed for generating
degraded signal alarm and/or AIS.
Unsigned32r/w
Constraints:
range: 2-10
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.29
ethIfSnkDegPeriod
Number of consecutive bad seconds that are needed for generating
degraded signal alarm and/or AIS.
Unsigned32r/w
Constraints:
range: 2-10
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.30
ethIfSrcReducedBitRateThreshold
Reduced Bit Rate threshold in bits per second that is needed
for generating a major alarm and/or AIS. If the threshold
for the interface is greater than the maximum value
reportable by this object then this object shou…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.31
ethIfSnkReducedBitRateThreshold
Reduced Bit Rate threshold in bits per second that is needed
for generating a major alarm and/or AIS. If the threshold
for the interface is greater than the maximum value
reportable by this object then this object shou…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.32
ethIfSrcReducedBitRateHighThreshold
Reduced Bit Rate threshold in 1,000,000 bits per second that
is needed for generating a major alarm and/or AIS. If this
object reports a value of `n' then the threshold value is
somewhere in the range of `n-500,000' to…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.33
ethIfSnkReducedBitRateHighThreshold
Reduced Bit Rate threshold in 1,000,000 bits per second that
is needed for generating a major alarm and/or AIS. If this
object reports a value of `n' then the threshold value is
somewhere in the range of `n-500,000' to…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.34
ethIfSrcReducedBitRateAIS
Defines if Reduced Bit Rate signal shall result in
generation of AIS.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.35
ethIfSnkReducedBitRateAIS
Defines if Reduced Bit Rate signal shall result in
generation of AIS.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.36
ethIfSnkDegAIS
Defines if degraded signal on the sink interface shall
result in generation of AIS.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.37
ethIfSrcMinorReducedBitRateThreshold
Reduced Bit Rate threshold in bits per second that is needed
for generating a minor alarm. If the threshold for the
interface is greater than the maximum value reportable by
this object then this object should report i…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.38
ethIfSnkMinorReducedBitRateThreshold
Reduced Bit Rate threshold in bits per second that is needed
for generating a minor alarm. If the threshold
for the interface is greater than the maximum value
reportable by this object then this object should report i…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.39
ethIfSrcMinorReducedBitRateHighThreshold
Reduced Bit Rate threshold in 1,000,000 bits per second that
is needed for generating a minor alarm. If this object
reports a value of `n' then the threshold value is somewhere
in the range of `n-500,000' to `n+499,999…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.40
ethIfSnkMinorReducedBitRateHighThreshold
Reduced Bit Rate threshold in 1,000,000 bits per second that
is needed for generating a minor alarm. If this object
reports a value of `n' then the threshold value is somewhere
in the range of `n-500,000' to `n+499,999…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.41
ethIfSrcFailure
A string describing the configuration or error status of the
source sub-interface. The string is the empty string if the
configuration is correct, otherwise a message describing the
error.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.42
ethIfSnkFailure
A string describing the configuration or error status of the
sink sub-interface. The string is the empty string if the
configuration is correct, otherwise a message describing the
error.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.43
ethIfInterfaceGroup
The index (ethIfIndex) in the ethIfTable of the interface
group that this interface belongs to. The value -1 denotes
that the interface does not belong to an interface group.
Note that the interface can only belong to …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.44
ethIfMaxMaxQueueFrames
The maximum allowed value for the maximum queue size for
queues on the interface, ethIfQueueMaxFrames.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.45
ethIfDefaultDropPrecedence
Frames that do have any priority information are assigned
this drop precedence (DP). The drop precedence must be in
the range 0 to (ethDevCapDropPrecedenceLevels - 1).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.46
ethIfDropPrecedenceMap
Represents a flow group to drop precedence (DP) map. The
octet string consists of eight octets, one for each flow
group. The position in the string represents the flow
group, where the first (left-most) position repre…
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.2928.2.2.1.3.2.1.47

ethIfQueueTable

table
.1.3.6.1.4.1.2928.2.2.1.3.3 · 1 row entry · 3 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethIfQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethIfQueueTable' 
Queues, one queue per interface and traffic class.
ethIfQueueEntry row .1.3.6.1.4.1.2928.2.2.1.3.3.1
An entry representing one queue.
Indexes
Column Syntax OID
ethIfQueueTrafficClass
Traffic class representing the queue. The index ranges from
0 to the max number of traffic classes - 1. See
ethDevCapMaxTrafficClass for max value supported by the
device.
TrafficClass
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2928.2.2.1.3.3.1.1
ethIfQueueMaxOctets
The maximum number of octets that can be queued for input on
the interface and traffic class. If an arriving frame is
too large to fit into the queue, the frame is dropped. A
setting of -1 results in a queue setting s…
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.2928.2.2.1.3.3.1.2
ethIfQueueMaxFrames
The maximum number of frames that can be queued for input on
the interface and traffic class. A setting of 0 means that
queuing is disabled and frames destined for the queue are
dropped. A setting of -1 means that the…
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.2928.2.2.1.3.3.1.3

ethIfVLANSetsTable

table
.1.3.6.1.4.1.2928.2.2.1.3.4 · 1 row entry · 5 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethIfVLANSetsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethIfVLANSetsTable' 
A table with VLAN sets.  An interface belongs to the VLANs
described by the union of all VLAN ids specified in all VLAN
sets for the interface.  Is possible to describe the same
VLAN ids either by using one or by using multiple VLAN
sets.  Because the administrative data customer id and purpose
can be set per VLAN set, it is possible to assign these
differently for different VLAN ids when using multiple VLAN
sets.
ethIfVLANSetsEntry row .1.3.6.1.4.1.2928.2.2.1.3.4.1
Represents a VLAN set. A VLAN set represents a list of VLAN
ids that an interface shall belong to.
Indexes
Column Syntax OID
ethIfVLANSetIndex
An index representing the VLAN set.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.4.1.1
ethIfVLANRowStatus
See SNMPv2-TC. The following values are supported:

active(1). The object always reads active.

createAndGo(4). A new conceptual row is created representing
a new VLAN set.

de…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2928.2.2.1.3.4.1.2
ethIfVLANSet
A set of VLAN ids that the interface belongs to.
VLANSetr/w
Type Constraints:
range: 512
 .1.3.6.1.4.1.2928.2.2.1.3.4.1.3
ethIfVLANCustomerId
An identification number representing the customer or user
using the VLAN set. The value could be used for e.g. Charge
Data Records. The value zero (0) indicates that no specific
customer shall be associated with the V…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.4.1.4
ethIfVLANPurpose
A string representing the purpose of the VLAN set. The
string is for administrative purpose.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2928.2.2.1.3.4.1.5

ethDot3Table

table
.1.3.6.1.4.1.2928.2.2.1.3.5 · 1 row entry · 16 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethDot3Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethDot3Table' 
Table that contains representations of physical interfaces.
ethDot3Entry row .1.3.6.1.4.1.2928.2.2.1.3.5.1
An entry representing one physical interface. For each
conceptual row in this table, a conceptual row with the same
index exists in the interface base table ethIfTable. Entries
in this table shall automatically be cre…
Indexes
Column Syntax OID
ethDot3AutoNegotiate
Controls the desired value of auto-negotiation:

true(1). Auto-negotiation shall be enabled. If the interface
does not allow auto-negotiation, then this object is ignored.

false(2). Auto-neg…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.1
ethDot3AdvertisedSpeed
The link speeds that the interface shall advertise that it
supports.

If auto-negotiation is disabled, then use the highest set
link speed.
AdvertisedSpeedr/w
Type Values:
0auto
1b10
2b100
3b1000
4b10g
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.2
ethDot3AdvertisedDuplex
The duplex settings that the interface shall advertise that
it supports. See ethDevCapAdvertisedDuplex for allowed duplex
settings on the device.
AdvertisedDuplexr/w
Type Values:
0auto
1fullDuplex
2halfDuplex
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.3
ethDot3AdvertisedFlowControl
The flow control settings that the interface shall advertise
that it supports. If auto-negotiation is disabled
(ethDot3SAutoNegotiate), then this object describes the
flow control that shall be used. `auto(0)' is then …
AdvertisedFlowControlr/w
Type Values:
0auto
1pause
2asmDir
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.4
ethDot3ActiveSpeed
The active links speed in Mbps.
Unsigned32
Constraints:
range: 0-0
range: 10-10
range: 100-100
range: 1000-1000
range: 10000-10000
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.5
ethDot3ActiveDuplex
The active link duplex. If the interface is down, then
`notApplicable(3)' is presented.
Enumeration
Enumerated Values:
1fullDuplex
2halfDuplex
3notApplicable
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.6
ethDot3ActiveFlowControl
The active link flow control. If the interface is down, then
`notApplicable(5)' is presented.
Enumeration
Enumerated Values:
1all
2receive
3transmit
4none
5notApplicable
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.7
ethDot3ForceVLANTagged
Specifies a set of VLAN ids for which frames shall be
forwarded with a tag although ethIfTransmittedFrameType is
set to `untagged(3)'. The setting of this variable has no
meaning if ethIfTransmittedFrameType is set to
…
VLANSetr/w
Type Constraints:
range: 512
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.8
ethDot3ForceVLANUntagged
Specifies a set of VLAN ids for which frames shall be
forwarded without a tag although ethIfTransmittedFrameType
is set to `vlanTagged(2)'. The setting of this variable has
no meaning if ethIfTransmittedFrameType is se…
VLANSetr/w
Type Constraints:
range: 512
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.9
ethDot3SupportedSpeeds
All supported speeds for ethDot3AdvertisedSpeed. Note that
this value depends on the SFP.
AdvertisedSpeed
Type Values:
0auto
1b10
2b100
3b1000
4b10g
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.10
ethDot3ResetToDefaults
Writing a zero (0) resets all the the settings on the
interface to its default values.
Integer32r/w
Constraints:
range: 0-0
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.11
ethDot3AutoNegotiateStatus
Indicates if auto-negotiation is enabled or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.12
ethDot3AutoNegotiateAllowed
Indicates if auto-negotiation is permitted with the
current combination of interface type and speed.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.13
ethDot3AutoNegotiateMandatory
Indicates if auto-negotiation is required with the
current combination of interface type and speed.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.14
ethDot3SupportedIfType
All supported interface types on the interface. This
denotes what can be set on ethDot3SelectedIfType. Note that
this value depends on the SFP.
Bits
Enumerated Values:
3b100baseTX
4b1000baseSX
5b1000baseLX
6b1000baseT
8b10GbaseSR
9b10GbaseLR
10b10GbaseLRM
11b10GbaseER
12b10GbaseZR
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.15
ethDot3SelectedIfType
Selected interface speed. A selected value of `auto(0)'
means that the interface type with the highest available
line speed will be used. See ethIfType for the currently
used type. The interface type must correspond t…
EthInterfaceTyper/w
Type Values:
0auto
1unknown
2bETS
3b100baseTX
4b1000baseSX
5b1000baseLX
6b1000baseT
7bETSGroup
8b10GbaseSR
9b10GbaseLR
10b10GbaseLRM
11b10GbaseER
12b10GbaseZR
 .1.3.6.1.4.1.2928.2.2.1.3.5.1.16

ethEtsTable

table
.1.3.6.1.4.1.2928.2.2.1.3.6 · 1 row entry · 6 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethEtsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethEtsTable' 
Table that contains definitions of Trail Termination Points
(TTPs) for Ethernet Transport Service. For every row in the
table, a corresponding row exists in the table
ethIfTable.
ethEtsEntry row .1.3.6.1.4.1.2928.2.2.1.3.6.1
An entry representing one ETS TTP.
Indexes
Column Syntax OID
ethEtsRowStatus
See SNMPv2-TC. The following values are supported:

active(1). The object always reads active.

createAndGo(4). A new conceptual row is created representing
a new Ethernet Transport Service T…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2928.2.2.1.3.6.1.1
ethEtsMode
Specifies whether the ETS TTP shall establish unicast or
multicast connection.
Enumerationr/w
Enumerated Values:
1unicast
2multicast
3unspecified
 .1.3.6.1.4.1.2928.2.2.1.3.6.1.2
ethEtsLocalDsti
The DSTI (DTM Service Type Instance) for the local
application implementing the service. A valid value is
automatically assigned when the conceptual row is created.
Any unique value may be assigned to this object.
NETI-CHMGR-MIBDstir/w
Type Constraints:
range: 0..32769
 .1.3.6.1.4.1.2928.2.2.1.3.6.1.3
ethEtsODescription
A reference to the corresponding description of the
connection in the chmgrODescriptionTable in the Channel
Manager MIB (NETI-CHMGR-MIB). The value is the index into
the table, i.e. the value of chmgrODescrIndex. When…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.6.1.4
ethEtsOConnection
A reference to the corresponding originating connection in
the table chmgrOConnectionTable in the Channel Manager MIB
(NETI-CHMGR-MIB). When an originating connection is
established from this trail termination point, a…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.6.1.5
ethEtsSnkExpectChannel
Controls whether a channel is expected to be terminated on
this ETS TTP or not. This value can only be set if the mode
(ethEtsMode) is multicast.

true(1). A channel is expected to terminate. If a chann…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.6.1.6

ethEtsTConnectionTable

table
.1.3.6.1.4.1.2928.2.2.1.3.7 · 1 row entry · 3 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethEtsTConnectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethEtsTConnectionTable' 
Table that holds references to terminating connections for a
ETS trail termination point. A trail termination point can
terminate only one connection if a unicast connection is
configured, and multiple connections if a multicast
connection is configured.
ethEtsTConnectionEntry row .1.3.6.1.4.1.2928.2.2.1.3.7.1
An entry representing the reference to one terminating
connection.
Indexes
Column Syntax OID
ethEtsTConnectionIndex
The index representing one terminating connection for the
trail terminating point. If the trail terminating point is
unicast, the value of the index is always one (1) as a
unicast trail terminating point can only termin…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.7.1.1
ethEtsTConnectionRowStatus
Row status according to SNMPv2-TC. It is only possible to
delete rows. Rows are created by the application. If a row is
deleted that represents an active connection, a new row will
be created representing that connectio…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2928.2.2.1.3.7.1.2
ethEtsTConnection
A reference to the corresponding terminating connection in
the table chmgrTConnectionTable in the Channel Manager MIB
(NETI-CHMGR-MIB). When a connection is terminated on this
trail termination point, an entry is create…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.7.1.3

ethEtsIndexLookupTable

table
.1.3.6.1.4.1.2928.2.2.1.3.8 · 1 row entry · 2 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethEtsIndexLookupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethEtsIndexLookupTable' 
Table to lookup the index in the ethEtsTable, corresponding
to a specific DSTI.
ethEtsIndexLookupEntry row .1.3.6.1.4.1.2928.2.2.1.3.8.1
One conceptual row representing one lookup entry.
Indexes
Column Syntax OID
ethEtsIndexLookupDevIndex
The value refers to the ethDevIndex in the ethEtsTable for
the ETS interface represented by the DSTI.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.8.1.1
ethEtsIndexLookupIfIndex
The value refers to the ethIfIndex in the ethEtsTable for
the ETS interface represented by the DSTI.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.8.1.2

ethIfRstpTable

table
.1.3.6.1.4.1.2928.2.2.1.3.9 · 1 row entry · 14 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethIfRstpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethIfRstpTable' 
The table contains Rapid Spanning Tree Protocol (RSTP)
specific configurations and data for ports. If a port does
not support RSTP, then the table will not hold an entry for
that port.
ethIfRstpEntry row .1.3.6.1.4.1.2928.2.2.1.3.9.1
An entry represents Rapid Spanning Tree Protocol (RSTP) data
for one port (interface).
Indexes
Column Syntax OID
ethIfRstpPortIdentifier
The unique port identifier.
PortIdentifier
Type Constraints:
range: 2
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.1
ethIfRstpPriority
The port priority. The value must be set in increments of
16.
Integer32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.2
ethIfRstpState
Describes if the port forwards MAC frames and whether
or not it learns from their source addresses.

discarding(1). The port is not enabled or has been excluded
from forwarding and learning.
…
Enumeration
Enumerated Values:
1discarding
2learning
3forwarding
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.3
ethIfRstpTopologyChangeAcknowledge
true(1). A topology change is in progress and the port is
about to acknowledge this.

false(2). A topology change is not in progress.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.4
ethIfRstpPathCost
The contribution of this port to the path cost of paths
towards the spanning tree root which include this port.

A value of zero (0) means that the path cost is
automatically calculated based on the port s…
Integer32r/w
Constraints:
range: 0-200000000
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.5
ethIfRstpDesignatedRoot
The unique bridge identifier of the root bridge.
BridgeIdentifier
Type Constraints:
range: 8
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.6
ethIfRstpDesignatedCost
The path cost to the root bridge from the designated
bridge.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.7
ethIfRstpDesignatedBridge
The bridge identifier of the best bridge connected to
this port's segment.
BridgeIdentifier
Type Constraints:
range: 8
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.8
ethIfRstpDesignatedPort
The port identifier of the best port on the Designated
Bridge.
PortIdentifier
Type Constraints:
range: 2
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.9
ethIfRstpAdminEdgePort
Setting of the edge port state of this port.

auto(0). The setting of the port as edge port or not is done
automatically. See ethIfRstpOperEdgePort for the current value
when this object is set to `auto(0…
Enumerationr/w
Enumerated Values:
0auto
1true
2false
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.10
ethIfRstpOperEdgePort
The actual state of the port. See ethIfRstpAdminEdgePort for
setting of the port state.

true(1). The port is an edge port.

false(2). The port is not an edge port.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.11
ethIfRstpAdminPointToPointMAC
Setting of the point-to-point state of this port.

auto(0). The state becomes `true(1)' if the port is a
full-duplex physical port, or an ETS TTP with a maximum of
one terminating channel. Otherwise the s…
Enumerationr/w
Enumerated Values:
0auto
1true
2false
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.12
ethIfRstpOperPointToPointMAC
The point-to-point state of this port.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.13
ethIfRstpCurrentPathCost
The contribution of this port to the path cost of paths
towards the spanning tree root which include this port.
Unless ethIfRstpPathCost is `auto(1), then this always reads
the same value as that object.
Integer32
Constraints:
range: 1-200000000
 .1.3.6.1.4.1.2928.2.2.1.3.9.1.14

ethIfgTable

table
.1.3.6.1.4.1.2928.2.2.1.3.10 · 1 row entry · 11 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethIfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethIfgTable' 
Table that contains definitions of interface groups.  For
every row in the table, a corresponding row exists in the
table ethIfTable.
ethIfgEntry row .1.3.6.1.4.1.2928.2.2.1.3.10.1
An entry representing one interface group. An interface
group is a virtual interface that groups two ETS interfaces
for 1+1 protected transport of Ethernet.
Indexes
Column Syntax OID
ethIfgRowStatus
See SNMPv2-TC. The following values are supported:

active(1). The object always reads active.

createAndGo(4). A new conceptual row is created representing
a new interface group.
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2928.2.2.1.3.10.1.1
ethIfgMembers
A list of the interfaces that are members of the interface
group. An interface is added or removed from an interface
group from the interface using ethIfInterfaceGroup.
InterfaceIndexList .1.3.6.1.4.1.2928.2.2.1.3.10.1.2
ethIfgDifferentialDelay
The measured difference delay in microseconds between the
two channels in the interface group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.10.1.3
ethIfgDifferentialDelayValid
Specifies if the value of ethIfgDifferentialDelay is valid
or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.10.1.4
ethIfgAheadInterface
The value of ethIfIndex of the interface that is ahead of
the other. A value of zero (0) implies invalid, i.e. no
channel is established. If only one interface is a member
of the interface group, then that interface i…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.10.1.5
ethIfgHitlessProtection
Specifies if hitless protection shall be attempted or not.

true(1). Will attempt to reach a hitless protection state.

false(2). Will only attempt to reach a standby protection
state.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.10.1.6
ethIfgProtectionStatus
The current protection state.
IfgProtectionStatus
Type Values:
1unavailable
2unprotected
3standbyProtected
4hitlessCapable
5hitlessProtected
 .1.3.6.1.4.1.2928.2.2.1.3.10.1.7
ethIfgExpectedProtectionStatus
The expected protection state. When the current protection
state (see ethIfgProtectionStatus) is lower than the
expected protection state, an alarm is raised. The alarm is
cleared when the expected protection state is…
IfgProtectionStatusr/w
Type Values:
1unavailable
2unprotected
3standbyProtected
4hitlessCapable
5hitlessProtected
 .1.3.6.1.4.1.2928.2.2.1.3.10.1.8
ethIfgForceHit
A write of zero (0) resets the buffers, and will therefore
minimize the the latency penalty incurred by the 1+1
buffering.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.10.1.9
ethIfgActiveInterface
The value of ethIfIndex of the interface from where frames
are currently being forwarded. If the ethIfgProtectionStatus
is `unavailable(1)' then the value is zero (0).
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.10.1.10
ethIfgExpectChannel
Controls whether a channel is expected to be terminated on
this ETS TTPs for the member interfaces or not. This value
can only be set if the mode (ethEtsMode) is multicast.

true(1). A channel is expecte…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2928.2.2.1.3.10.1.11

ethIfQDropThresholdTable

table
.1.3.6.1.4.1.2928.2.2.1.3.11 · 1 row entry · 4 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethIfQDropThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethIfQDropThresholdTable' 
A queue (Traffic Class) can have multiple drop thresholds,
one for each drop precedence.  The table contains
configuration of how to drop frames per combination of
traffic class (TC) and drop precedence (DP) for the
interfaces.
ethIfQDropThresholdEntry row .1.3.6.1.4.1.2928.2.2.1.3.11.1
An entry in the table.
Indexes
Column Syntax OID
ethIfQDropThresDropPrecedence
The value of drop precedence (DP). The value range is given
by the device and is from zero to and including
(ethDeviceDropPrecedenceLevels - 1).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2928.2.2.1.3.11.1.1
ethIfQDropThresMaxFrames
The maximum number of frames that can be queued to this
interface for this combination of traffic class and drop
precedence. Arriving frames are discarded when the queue
has reached its maximum length. A value of 0 de…
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.2928.2.2.1.3.11.1.2
ethIfQDropThresCurrentMaxFrames
The maximum number of frames that currently can be queued to
this interface for this combination of traffic class and
drop precedence. This value contains the currently assigned
threshold, both for automatic and manual…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2928.2.2.1.3.11.1.3
ethIfQDropThresDropProbabilityFunction
The drop probability function that shall be used for the
combination of traffic class and drop precedence on the
interface. The values supported by the device are presented
in ethDevDropProbabilityFunctions.
Enumerationr/w
Enumerated Values:
0taildrop
1wred
 .1.3.6.1.4.1.2928.2.2.1.3.11.1.4

ethStatDcap1Table

table
.1.3.6.1.4.1.2928.2.2.1.4.1 · 1 row entry · 14 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethStatDcap1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethStatDcap1Table' 
Table holds statistical DCAP-1 data for interface groups
that are implemented using ETS connections.
ethStatDcap1Entry row .1.3.6.1.4.1.2928.2.2.1.4.1.1
A conceptual row holding DCAP-1 statistical data for a single
interface group.
Indexes
Column Syntax OID
ethStatDcap1Reset
Writing a zero (0) to this object resets all counters
for the interface.
Integer32r/w
Constraints:
range: 0-0
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.1
ethStatDcap1TxOctets
Total number of transmitted octets (bytes).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.2
ethStatDcap1TxPackets
Total number of transmitted packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.3
ethStatDcap1TxDiscardOctets
Total number of transmitted and discarded octets (bytes).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.4
ethStatDcap1TxDiscardPackets
Total number of transmitted and discarded packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.5
ethStatDcap1TxBitrate
The transmit utilization in bits per second on the
connection as a mean value during the last 30 seconds.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.6
ethStatDcap1TxLoad
The transmit utilization (load) in percent on the connection
as mean value measured during the last 30 seconds.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.7
ethStatDcap1RxOctets
Total number of received octets (bytes).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.8
ethStatDcap1RxPackets
Total number of received packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.9
ethStatDcap1RxDiscardOctets
Total number of received and discarded octets (bytes).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.10
ethStatDcap1RxDiscardPackets
Total number of received packets that are discarded and not
counted in ethStatDcap1RxErrorCRC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.11
ethStatDcap1RxErrorCRC
Total number of received packets with CRC32 error. For an
interface group where the protectionStatus is
`hitlessProtected(5)', this value is not increased.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.12
ethStatDcap1RxBitrate
The receive utilization in bits per second on the connection
as a mean value during the last 30 seconds.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.13
ethStatDcap1RxLoad
The receive utilization (load) in percent on the connection
as mean value measured during the last 30 seconds.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2928.2.2.1.4.1.1.14

ethIfStatTable

table
.1.3.6.1.4.1.2928.2.2.1.4.2 · 1 row entry · 5 columns
Open in standard view
Uses the netinsight variant from /opt/observium/mibs/netinsight.
Command help
Walk ethIfStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETI-ETH-MIB' -M '/opt/observium/mibs/netinsight:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETI-ETH-MIB::ethIfStatTable' 
Table holds statistical data for Ethernet interfaces.
ethIfStatEntry row .1.3.6.1.4.1.2928.2.2.1.4.2.1
A conceptual row holding statistica data for a single interface.
Indexes
Column Syntax OID
ethIfStatReset
Writing a zero (0) to this object resets all counters
for the interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2928.2.2.1.4.2.1.1
ethIfStatTxBitrate
The transmit utilization in bits per second on the interface
as a mean value during the last 30 seconds.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.2.2.1.4.2.1.2
ethIfStatTxLoad
The transmit utilization (load) in percent of the wire speed
on the interface as mean value measured during the last 30
seconds.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2928.2.2.1.4.2.1.3
ethIfStatRxBitrate
The receive utilization in bits per second on the interface
as a mean value during the last 30 seconds.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2928.2.2.1.4.2.1.4
ethIfStatRxLoad
The receive utilization (load) in percent of the wire speed
on the interface as mean value measured during the last 30
seconds.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2928.2.2.1.4.2.1.5