NBS-SIGLANE-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
25
nbsSigLanePortTable
table.1.3.6.1.4.1.629.236.10.1
·
1 row entry
·
3 columns
Uses the mrv variant from
Command help
/opt/observium/mibs/mrv.
Walk nbsSigLanePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBS-SIGLANE-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBS-SIGLANE-MIB::nbsSigLanePortTable'
A table that describes signaling lanes for a QSFP[+] or CFP port.
Contains a description of a particular port signaling lane.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The index to the MIB-II Interface table entry which represents this
port. This value should be 0 if there is no corresponding MIB-II interface entry. |
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.629.236.10.1.1.1 |
||||||
|
fiber(2) indicates that lane signaling is conducted on separate
fibers. lambda(3) indicates that lane signaling is conducted on different wavelengths on a single SMF fiber. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.629.236.10.1.1.10 |
||||||
|
The number of signaling lanes in this port
|
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.236.10.1.1.20 |
nbsSigLaneLaneTable
table.1.3.6.1.4.1.629.236.20.1
·
1 row entry
·
22 columns
Uses the mrv variant from
Command help
/opt/observium/mibs/mrv.
Walk nbsSigLaneLaneTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBS-SIGLANE-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBS-SIGLANE-MIB::nbsSigLaneLaneTable'
A table that describes (fiber/lambda) network signaling lanes for a multi-lane port.
Contains a description of a particular (fiber/lambda) signaling lane.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The index to the MIB-II Interface table entry which contains this
(fiber/lambda) lane. |
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.629.236.20.1.1.1 |
||||||||||||
|
Ordinal index for the signaling lane in a port:
1..4 for QSFP[+] 4 x 10G 1..4 for CFP 4 x 25G 1..4 for CFP 4 x 28G 1..10 for CFP 10 x 10G |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.236.20.1.1.2 |
||||||||||||
|
The nominal frequency, in MHz.
|
NBS-MIBNbsTcMHz Type Constraints: range: 1..4294967295 |
.1.3.6.1.4.1.629.236.20.1.1.10 |
||||||||||||
|
The nominal wavelength (nanometers) is an ASCII string
to be human-readable. CWDM wavelengths use 4 digits. DWDM wavelengths use seven digits and a decimal point. Not supported value: 'N/A' |
OctetString Constraints: range: 4-8 |
.1.3.6.1.4.1.629.236.20.1.1.11 |
||||||||||||
|
The ITU grid labels DWDM channels with a letter 'band' and a
numeric channel. Within this mib, the band is indicated by this object, and the channel number is shown in the object nbsOsaChannelNumber. Fre… |
NBS-CMMCENUM-MIBNbsCmmcChannelBand Type Values:
|
.1.3.6.1.4.1.629.236.20.1.1.12 |
||||||||||||
|
The channel number can be derived by extracting the two middle
digits from the six digit frequency in GHz. |
Integer32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.236.20.1.1.13 |
||||||||||||
|
This object controls the lane's transmitter:
notSupported(1), returned if transmitter not configurable, i.e. always enabled; no(2), to enable the transmitter; yes(3), to di… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.629.236.20.1.1.14 |
||||||||||||
|
This object specifies the supported nbsSigLaneLaneFaultsOper bit(s).
A zero length OCTET STRING indicates this information is not provided. |
OctetString Constraints: range: 0-2 |
.1.3.6.1.4.1.629.236.20.1.1.15 |
||||||||||||
|
This object provides operational lane fault conditions:
The first octet provides Tx information: Bit 0: Tx LOS if set Bit 1: Tx Fault if set Bit 2:… |
OctetString Constraints: range: 0-2 |
.1.3.6.1.4.1.629.236.20.1.1.16 |
||||||||||||
|
This object indicates the status of this lane's
measured received power, reported in nbsSigLaneLaneTxPower: notSupported(1), if (nbsSigLaneLaneTxPower = 0x80000000); lowAlarm(2), if nbsSi… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.629.236.20.1.1.20 |
||||||||||||
|
The output power (in milli dBm) of this lane.
Not supported value: 0x80000000 |
NBS-MIBNbsTcMilliDb Type Constraints: range: -2147483648..100000 |
.1.3.6.1.4.1.629.236.20.1.1.21 |
||||||||||||
|
The desired output power (in milli dBm) for this lane; the value
should be within the supported bounds of the given pluggable. For a CFP/CFP2 supporting configurable Tx power, this is applied in the corresponding MSA B4… |
NBS-MIBNbsTcMilliDbr/w Type Constraints: range: -2147483648..100000 |
.1.3.6.1.4.1.629.236.20.1.1.22 |
||||||||||||
|
This object indicates the status of this lane's
measured received power, reported in nbsSigLaneLaneRxPower: notSupported(1), if (nbsSigLaneLaneRxPower = 0x80000000); lowAlarm(2), if nbsSi… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.629.236.20.1.1.30 |
||||||||||||
|
The received optical power (in milli dBm) of this lane.
Not supported value: 0x80000000 |
NBS-MIBNbsTcMilliDb Type Constraints: range: -2147483648..100000 |
.1.3.6.1.4.1.629.236.20.1.1.31 |
||||||||||||
|
This object indicates the status of laser bias current,
as reported in nbsSigLaneLaneBiasAmps: notSupported(1), if (nbsSigLaneLaneBiasAmps = -1); lowAlarm(2), if below nbsSigLanePortBiasAmp… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.629.236.20.1.1.40 |
||||||||||||
|
The bias current (in microAmps) of this lane.
Not supported value: -1 |
NBS-MIBNbsTcMicroAmp Type Constraints: range: -1..2147483647 |
.1.3.6.1.4.1.629.236.20.1.1.41 |
||||||||||||
|
This object indicates the status of laser temperature,
as reported in nbsSigLaneLaneLaserTemp: notSupported(1), if (nbsSigLaneLaneLaserTemp = 0x80000000); lowAlarm(2), if below nbsSigLanePo… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.629.236.20.1.1.50 |
||||||||||||
|
The temperature (in degrees Celsius) of this lane.
Not supported value: 0x80000000 |
NBS-MIBNbsTcTemperature Type Constraints: range: -2147483648..1000 |
.1.3.6.1.4.1.629.236.20.1.1.51 |
||||||||||||
|
The count of bytes in all Ethernet frames transmitted.
Not supported value: 0xFFFFFFFFFFFFFFFF |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.629.236.20.1.1.60 |
||||||||||||
|
The count of all Ethernet frames transmitted.
Not supported value: 0xFFFFFFFFFFFFFFFF |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.629.236.20.1.1.61 |
||||||||||||
|
The count of bytes in all Ethernet frames received.
Not supported value: 0xFFFFFFFFFFFFFFFF |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.629.236.20.1.1.70 |
||||||||||||
|
The count of all Ethernet frames received.
Not supported value: 0xFFFFFFFFFFFFFFFF |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.629.236.20.1.1.71 |