MY-CLUSTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
6

scMemberTable

table
.1.3.6.1.4.1.4881.1.1.10.2.31.1.2.1 · 1 row entry · 5 columns
Open in standard view 
This table contains one row per cluster member,
including the command switch.
scMemberEntry entry .1.3.6.1.4.1.4881.1.1.10.2.31.1.2.1.1
An entry containing cluster management information
applicable to a particular cluster member. If the
entry contain the command switch, this entry cannot
be modified.
Indexes
scMemberMacAddress
Column Syntax OID
scMemberMacAddress
The management MAC address of the member device.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.4881.1.1.10.2.31.1.2.1.1.1
scMemberNumber
An arbitrary value which uniquely identifies the
cluster member switch number. It ranges from 0 to
scStatusMaxNumberOfMembers - 1. incluing the command
switch.
Unsigned32r/w
Textual Convention: CISCO-ATM-SWITCH-CUG-MIBUnsigned32 Unsigned32
 .1.3.6.1.4.1.4881.1.1.10.2.31.1.2.1.1.2
scMemberOperStatus
The status of cluster management connectivity between
the command switch and a cluster member. Cluster management
connectivity is determined by the exchange of cluster
management messages between the command switch and …
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.4881.1.1.10.2.31.1.2.1.1.3
scMemberDeviceID
The value of MacAddress used for identify the device in lldp pdu.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.4881.1.1.10.2.31.1.2.1.1.4
scMemberRowStatus
The status of this conceptual row.The
devices currently eligible to be added into the
cluster are listed in the scCandidateTable.
An attempt to add a new member may fail. See
scStatusLastFailureAddMember for possible r…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4881.1.1.10.2.31.1.2.1.1.5

scCandidateTable

table
.1.3.6.1.4.1.4881.1.1.10.2.31.1.3.1 · 1 row entry · 1 columns
Open in standard view 
This table contains one row per cluster candidate,
A cluster candidate is a device that is currently
eligible to be added to the cluster of a command
switch.  A device is eligible if it satisfies the
following conditions:
1. It supports the cluster management protocol.
          
          
The entries in this table and the entries in 
scMemberTable are mutually exclusive at all
times.  That is, any device that is a cluster
member never shows up in the scCandidateTable
or is never a candidate at the same time .  Also, any 
candidate that shows up in scCandidateTable should not
appear in scMemberTable.
scCandidateEntry entry .1.3.6.1.4.1.4881.1.1.10.2.31.1.3.1.1
An entry pertaining to a single candidate device.
Indexes
scCandidateMacAddress
Column Syntax OID
scCandidateMacAddress
The management MAC address of a device qualified to
to be a cluster member of the command switch
cluster.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.4881.1.1.10.2.31.1.3.1.1.1