MX-SBC-MIB Table View

Call Agents
          
This table contains the parameter used to configure the Call
Agents.
          
The changes to this table are applied on execution of the
ApplyConfiguration command or when the service is restarted.

callAgentEntry row .0.4400.1.100.100.1

A row in table Call Agents.

Indexes

callAgentId

Column	Syntax	OID
callAgentId Id Unique numerical identifier for a Call Agent. The Call Agent ID is used by other parameters included in the Configuration Group to refer to a Call Agent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.100.100.1.100
callAgentName Name Call Agent name. Alpha-numerics as well as '.', '-' and '_' are valid characters.	OctetStringr/w Constraints: range: 0-100	.0.4400.1.100.100.1.200
callAgentEnable Enable Activate/deactivate the Call Agent.	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.4400.1.100.100.1.300
callAgentSignalingInterface Signaling Interface ID of the Signaling Interface used by this Call Agent.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.0.4400.1.100.100.1.400
callAgentMediaInterface Media Interfaces ID of the Media Interface used by this Call Agent.	OctetStringr/w Constraints: range: 0-6	.0.4400.1.100.100.1.500
callAgentGateway Gateway Name of the local gateway to be used by this Call Agent. When no local gateway is selected, the Call Agent will use an external peer. When the Gateway parameter is set to a local ga…	OctetStringr/w Constraints: range: 0-100	.0.4400.1.100.100.1.600
callAgentPeerHost Peer Host FQDN / IP addr and port of the SIP peer for this Call Agent.	MX-TC2MxIpHostNamePortr/w Type Constraints: range: 0..255	.0.4400.1.100.100.1.700
callAgentPeerNetwork Peer Network Network address of the SIP peers for this Call Agent.	MX-TC2MxIpAddrMaskr/w Type Constraints: range: 0..255	.0.4400.1.100.100.1.800
callAgentForceTransport Force Transport Force the Call Agent to use the selected transport protocol when initiating SIP dialogs. * None: Transport is not forced. Will use UDP if the use of another transport …	Enumerationr/w Enumerated Values: 100 none 200 tCP 300 uDP 400 tLS	.0.4400.1.100.100.1.900
callAgentConfigStatus Configuration Status Configuration status of the row. Indicates if the configuration of this Call Agent is valid and ready to be applied. * Valid: The current content of th…	Enumeration Enumerated Values: 100 valid 200 unknownSignalingInterface 300 unknownMediaInterface 400 invalidGatewayBinding 500 invalidConfig 600 noMediaInterface	.0.4400.1.100.100.1.1000
callAgentDelete Delete Delete this CallAgent table entry.	Enumerationr/w Enumerated Values: 0 noOp 10 delete	.0.4400.1.100.100.1.10000

Call Agent Rulesets
          
This table allows the user/administrator to associate Rulesets
to Call Agents.
          
The changes to this table are applied when the
ApplyConfiguration command is executed or when the service is
restarted.
          
The changes to the ruleset files are applied when the
ApplyConfiguration command is executed or when the service is
restarted.
          
Even if the ConfigModifiedStatus parameter does not indicate
'yes', after modifying the CallAgentRuleset table, you must
execute the ApplyConfiguration command.

callAgentRulesetEntry row .0.4400.1.100.200.1

A row in table Call Agent Rulesets.

Indexes

callAgentRulesetId

Column	Syntax	OID
callAgentRulesetId Id Unique numerical identifier for this Ruleset association.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.100.200.1.100
callAgentRulesetCallAgent CallAgent ID of the CallAgent table entry to which this Ruleset is attached.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.0.4400.1.100.200.1.200
callAgentRulesetPriority Priority Execution priority of this Ruleset for the Call Agent. Inbound rules of the Ruleset are executed in ascending priority order. Outbound rules are executed in descending priority ord…	Unsigned32r/w Constraints: range: 1-2147483647	.0.4400.1.100.200.1.300
callAgentRulesetRuleset Ruleset Name of the Ruleset to which the Call Agent is attached. This name must match the name of a Call Agent ruleset file in the local storage of this device (see the File Service). This …	OctetStringr/w Constraints: range: 0-48	.0.4400.1.100.200.1.400
callAgentRulesetParameters Ruleset Parameters List of named parameters (parameter=value) for the Ruleset. General format: parameter1=value1 parameter2=value2 parameter3=value3 Each parameter-value pair…	OctetStringr/w Constraints: range: 0-512	.0.4400.1.100.200.1.500
callAgentRulesetConfigStatus Configuration Status Configuration status of the Ruleset. Indicates whether this Ruleset is valid and ready to be applied. * Valid: The current content of the row is valid.…	Enumeration Enumerated Values: 100 valid 200 unknownRuleset 300 invalidConfig	.0.4400.1.100.200.1.600
callAgentRulesetDelete Delete Delete this entry from the table.	Enumerationr/w Enumerated Values: 0 noOp 10 delete	.0.4400.1.100.200.1.10000

Call Agent Ruleset Catalog
          
This table displays the call agent Rulesets installed on this
device.

callAgentRulesetCatalogEntry row .0.4400.1.100.250.1

A row in table Call Agent Ruleset Catalog.

Indexes

callAgentRulesetCatalogId

Column	Syntax	OID
callAgentRulesetCatalogId Id Unique identifier of the row in the table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.100.250.1.100
callAgentRulesetCatalogName Name Ruleset name. The Ruleset name is based on the file name from which the extension '.crs' was removed.	OctetString Constraints: range: 0-100	.0.4400.1.100.250.1.200
callAgentRulesetCatalogDescription Description Description of the Ruleset.	OctetString Constraints: range: 0-512	.0.4400.1.100.250.1.300
callAgentRulesetCatalogOrigin Origin Origin of the Ruleset. * Factory: Read only Ruleset delivered with the application. * Custom: User defined Ruleset. A custom Ruleset has priority over a factor…	Enumeration Enumerated Values: 100 factory 200 custom	.0.4400.1.100.250.1.400

Routing Rulesets
          
This table allows the user/administrator to configure the
Routing Rulesets.
          
The changes to this table are applied when the
ApplyConfiguration command is executed or when the service is
restarted.
          
The changes to the ruleset files are applied when the
ApplyConfiguration command is executed or when the service is
restarted.
          
Even if the ConfigModifiedStatus parameter does not indicate
'yes' after modifying the RoutingRules table, you must execute
the ApplyConfiguration command.

routingRulesEntry row .0.4400.1.100.300.1

A row in table Routing Rulesets.

Indexes

routingRulesId

Column	Syntax	OID
routingRulesId Id Unique numerical identifier for this RoutingRules table entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.100.300.1.100
routingRulesPriority Priority Priority of execution of the Routing Rulesets.	Unsigned32r/w Constraints: range: 1-2147483647	.0.4400.1.100.300.1.200
routingRulesRuleset Ruleset Name of the Routing Ruleset. This name must have the exact same name with the same extension ('.rrs') as the name of the routing ruleset file located in the local storage of this de…	OctetStringr/w Constraints: range: 0-48	.0.4400.1.100.300.1.300
routingRulesParameters Parameters List of parameters with their value (parameter=value) for the Routing Ruleset. General format: parameter1=value1 parameter2=value2 parameter3=value3 Each parameter…	OctetStringr/w Constraints: range: 0-512	.0.4400.1.100.300.1.400
routingRulesConfigStatus Configuration Status Configuration status of this routing entry. Indicates whether the RoutingRules table entry is valid and ready to be applied. * Valid: The current conte…	Enumeration Enumerated Values: 100 valid 200 unknownRuleset 300 invalidConfig	.0.4400.1.100.300.1.500
routingRulesDelete Delete Delete this entry from the table.	Enumerationr/w Enumerated Values: 0 noOp 10 delete	.0.4400.1.100.300.1.10000

Routing Ruleset Catalog
          
This table displays the routing Rulesets installed on this
device.

routingRulesetCatalogEntry row .0.4400.1.100.350.1

A row in table Routing Ruleset Catalog.

Indexes

routingRulesetCatalogId

Column	Syntax	OID
routingRulesetCatalogId Id Unique identifier of the row in the table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.100.350.1.100
routingRulesetCatalogName Name Ruleset name. The Ruleset name is based on the file name from which the extension '.rrs' was removed.	OctetString Constraints: range: 0-100	.0.4400.1.100.350.1.200
routingRulesetCatalogDescription Description Description of the Ruleset.	OctetString Constraints: range: 0-512	.0.4400.1.100.350.1.300
routingRulesetCatalogOrigin Origin Origin of the Ruleset. * Factory: Read only Ruleset delivered with the application. * Custom: User defined Ruleset. A custom Ruleset has priority over a factor…	Enumeration Enumerated Values: 100 factory 200 custom	.0.4400.1.100.350.1.400

Signaling Interfaces
          
This table allows the user/administrator to configure the
Signaling Interfaces.
          
To apply the changes made to this table, the service must be
restarted.

signalingInterfaceEntry row .0.4400.1.100.400.1

A row in table Signaling Interfaces.

Indexes

signalingInterfaceId

Column	Syntax	OID
signalingInterfaceId Id Unique numerical identifier for a Signaling Interface. The Signaling Interface ID is used by other parameters included in the Configuration Group to refer to this Signaling Interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.100.400.1.100
signalingInterfaceName Name Signaling Interface name. Alpha-numerics as well as '.', '-' and '_' are valid characters.	OctetStringr/w Constraints: range: 0-100	.0.4400.1.100.400.1.200
signalingInterfaceNetworkInterface Network Interface The name of the BNI Network Interface this Signaling Interface is linked to.	OctetStringr/w Constraints: range: 0-50	.0.4400.1.100.400.1.300
signalingInterfacePort Port Signaling port number on which to receive and send requests. A value of '0' uses the default SIP port.	Unsigned32r/w Constraints: range: 0-65535	.0.4400.1.100.400.1.400
signalingInterfaceSecurePort Secure Port Signaling port number used to receive and send Secure SIP requests. A value of '0' uses the default Secure SIP port.	Unsigned32r/w Constraints: range: 0-65535	.0.4400.1.100.400.1.450
signalingInterfaceTlsMode TLS Mode The TLS mode that this signaling interface uses. * Both: Permits both client and server connections. * Client: This Signaling Interface can only be used as a TLS client. If…	Enumerationr/w Enumerated Values: 100 both 200 client 300 server	.0.4400.1.100.400.1.475
signalingInterfaceAllowedTransports Allowed Transports This parameter configures which transport protocols are allowed on the Sinaling Interface. The possible values are: * All: The Signaling Interface has no restriction on…	Enumerationr/w Enumerated Values: 100 all 200 tlsOnly	.0.4400.1.100.400.1.480
signalingInterfacePublicIpAddr Public IP Address Public IP address of this Signaling Interface. Use this parameter when the interface is located on the 'private' side of a NAT and must be contacted from the 'public' side…	MX-TCMxIpAddressr/w Type Constraints: range: 0..255	.0.4400.1.100.400.1.500
signalingInterfaceTcpConnectTimeout Tcp Connection Timeout TCP connection timeout, in milliseconds, for connections initiated by the SBC service.	Unsigned32r/w Constraints: range: 1-127000	.0.4400.1.100.400.1.600
signalingInterfaceTcpIdleTimeout Tcp Idle Timeout Idle timeout, in milliseconds, after which a TCP connection is closed. A value of '0' means there is no idle timeout.	Unsigned32r/w Constraints: range: 0-300000	.0.4400.1.100.400.1.700
signalingInterfaceConfigStatus Configuration Status Configuration status of this Signaling Interface. Indicates if the Signaling Interface configuration is valid and ready to be applied. * Valid: The cur…	Enumeration Enumerated Values: 100 valid 200 unknownNetworkInterface 300 portConflict 350 invalidTlsMode 380 invalidTransportMode 400 invalidConfig	.0.4400.1.100.400.1.800
signalingInterfaceDelete Delete Delete this entry from the table.	Enumerationr/w Enumerated Values: 0 noOp 10 delete	.0.4400.1.100.400.1.10000

Media Interfaces
          
This table allows the user/administrator to configure the
Media Interfaces.
          
To apply the changes made to this table, the service must be
restarted.

mediaInterfaceEntry row .0.4400.1.100.500.1

A row in table Media Interfaces.

Indexes

mediaInterfaceId

Column	Syntax	OID
mediaInterfaceId Id Unique numerical identifier for a Media Interface. The Media Interface ID is used by other parameters included in the Configuration Group to refer to this Media Interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.100.500.1.100
mediaInterfaceName Name Media Interface name. Alpha-numerics as well as '.', '-' and '_' are valid characters.	OctetStringr/w Constraints: range: 0-100	.0.4400.1.100.500.1.200
mediaInterfaceNetworkInterface Network Interface The name of the BNI Network Interface the Signaling Interface is linked to.	OctetStringr/w Constraints: range: 0-50	.0.4400.1.100.500.1.300
mediaInterfacePortRange Port range Range of ports assigned to send and receive media traffic.	OctetStringr/w Constraints: range: 0-20	.0.4400.1.100.500.1.400
mediaInterfacePublicIpAddr Public Ip Address Public IP address of this Media Interface. Use this parameter when the interface is located on the 'private' side of a NAT and must be contacted from the 'public' side. …	MX-TCMxIpAddressr/w Type Constraints: range: 0..255	.0.4400.1.100.500.1.500
mediaInterfaceConfigStatus Configuration Status Configuration status of the row. Indicates if this Media Interface is valid and ready to be applied. * Valid: The current content of the row is valid. …	Enumeration Enumerated Values: 100 valid 200 unknownNetworkInterface 300 portConflict 400 invalidConfig	.0.4400.1.100.500.1.600
mediaInterfaceDelete Delete Delete this entry from the table.	Enumerationr/w Enumerated Values: 0 noOp 10 delete	.0.4400.1.100.500.1.10000

Registration Agent Configuration
          
This table allows the user/administrator to configure the
Registration Agent.
          
The changes to this table take effect immediately.

registrationAgentEntry row .0.4400.1.100.600.1

A row in table Registration Agent Configuration.

Indexes

registrationAgentId

Column	Syntax	OID
registrationAgentId Id Unique numerical identifier for this Registration Agent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.100.600.1.100
registrationAgentUsername User Name User name in the Address of Record (AoR) of this registration entry.	OctetStringr/w Constraints: range: 0-100	.0.4400.1.100.600.1.200
registrationAgentDomain Domain Domain in the Address of Record (AoR) of this registration entry.	OctetStringr/w Constraints: range: 0-100	.0.4400.1.100.600.1.300
registrationAgentFriendlyName Friendly Name Friendly name of this registration entry.	OctetStringr/w Constraints: range: 0-100	.0.4400.1.100.600.1.400
registrationAgentContact Contact SIP Contact to register. This field accepts the syntax of standard expressions of the SIP contact header. Also it supports a Call Agent macro format %capubip(ca_name)% that is subst…	OctetStringr/w Constraints: range: 0-100	.0.4400.1.100.600.1.500
registrationAgentRegistrationType Registration Type Selects the type of registrations made by this Registration Agent. * Normal: Registrations made by this Registration Agent are regular registrations for single users…	Enumerationr/w Enumerated Values: 100 normal 200 rFC6140	.0.4400.1.100.600.1.550
registrationAgentExpireValue Expire Value Registration expiration, in seconds.	Unsigned32r/w Constraints: range: 1-86400	.0.4400.1.100.600.1.600
registrationAgentRetryInterval Retry Interval Interval, in seconds, to retry an unsuccessful registration.	Unsigned32r/w Constraints: range: 1-86400	.0.4400.1.100.600.1.700
registrationAgentConfigStatus Configuration Status Configuration status of the Registration Agent. Indicates if the Registration Agent entry is valid. A valid entry is applied immediately when entering it. …	Enumeration Enumerated Values: 100 valid 200 invalidConfig 300 invalidContact	.0.4400.1.100.600.1.800
registrationAgentDelete Delete Delete this entry from the table.	Enumerationr/w Enumerated Values: 0 noOp 10 delete	.0.4400.1.100.600.1.10000

Peer Monitoring Configuration
          
This table extends the CallAgent table with the configuration
of the Blacklisting and the Peer Server Monitoring.
          
Blacklisting is the mechanism through which SIP server
availability is managed. Unresponsive servers are put in a
blacklist for a duration of BlackListingDuration and are not
used during that time.
          
To complement Blacklisting, Peer Monitoring can be used to
actively verify if servers are responsive. This allows
detecting unresponsive servers before they are used. Peer
Monitoring is done by sending SIP OPTIONs to the monitored
servers.
          
A server can be blacklisted as a result of Peer Monitoring or
in the course of normal SIP signaling.
          
During 'normal' SIP signaling, a server can be blacklisted on
dialog-opening transactions or on out-of-dialog transactions.
The in-dialog transactions that fail do not cause
blacklisting.
          
Peer Monitoring is based on the value of CallAgent.PeerHost.
          
If the value of the CallAgent.PeerHost parameter is an IP
address, then the Peer Monitoring is made on this address.
          
If the value of the CallAgent.PeerHost parameter is an FQDN,
all the address:port values obtained from the DNS are
monitored independently. The Call Agent is considered
blacklisted only when all the address:port values obtained
from the DNS are blacklisted.
          
Peer Monitoring is done using the transport protocol
configured in the CallAgent.ForceTransport parameter. If this
parameter is not configured, the default SIP transport (UDP)
is used.
          
Peer Monitoring is performed independently of the rules
defined in the Routing Rulesets.
          
The changes to this table are applied when the
ApplyConfiguration command is executed or when the service is
restarted.

peerMonitoringEntry row .0.4400.1.100.700.1

A row in table Peer Monitoring Configuration.

Indexes

peerMonitoringId

Column	Syntax	OID
peerMonitoringId Id ID of the CallAgent table entry used to configure the Peer Monitoring.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.100.700.1.100
peerMonitoringKeepAliveInterval Keep-Alive Interval Interval, in seconds, for sending Keep-Alive OPTIONS to monitor the Call Agent's peer. Special value '0' means the Peer Monitoring feature is disabled.	Unsigned32r/w Constraints: range: 0-3600	.0.4400.1.100.700.1.200
peerMonitoringBlackListingDuration Blacklisting Duration Duration, in seconds, that a peer host remains blacklisted when it appears to be down. Special value '0' means a peer host is never blacklisted.	Unsigned32r/w Constraints: range: 0-86400	.0.4400.1.100.700.1.300
peerMonitoringBlackListingDelay Blacklisting Delay Delay, in milliseconds, after which the peer is considered to be 'down' following expiration of the transaction timer. A value of '0' means the peer host is blacklisted i…	Unsigned32r/w Constraints: range: 0-60000	.0.4400.1.100.700.1.400
peerMonitoringBlackListingErrorCodes Blacklisting Error Codes Comma-separated list of SIP response codes indicating the peer is down. After sending a monitoring request or any other message to the peer, if the Call Agent recei…	OctetStringr/w Constraints: range: 0-200	.0.4400.1.100.700.1.500

Prefix-Based Routing
          
This table contains the prefix-based routing rules.
          
The changes to this table take effect immediately.

prefixBasedRoutingEntry row .0.4400.1.150.100.1

A row in table Prefix-Based Routing.

Indexes

prefixBasedRoutingRuleId

Column	Syntax	OID
prefixBasedRoutingRuleId RuleId Unique numerical identifier for this rule.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.150.100.1.100
prefixBasedRoutingPrefix Prefix Prefix to match in order to apply the rule. A rule is selected using the longest-prefix-match algorithm.	OctetStringr/w Constraints: range: 0-50	.0.4400.1.150.100.1.200
prefixBasedRoutingDestinationCa Destination Call Agent Id of a Call Agent in the CallAgent table. This Call Agent is used for sending the request.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.0.4400.1.150.100.1.300
prefixBasedRoutingRoutingMethod Routing Method Method used for routing. * NextHop: This method allows sending the request directly to this next hop, without necessarily modifying the outbound message. The next h…	Enumerationr/w Enumerated Values: 100 nextHop 200 outboundProxy 300 requestUri	.0.4400.1.150.100.1.400
prefixBasedRoutingDestinationOverride Destination Override String containing a coma-separated list of IP addresses or FQDNs to use as the next hop when the routing method is set to 'NextHop' or 'OutboundProxy'. This destination overrides the …	OctetStringr/w Constraints: range: 0-200	.0.4400.1.150.100.1.500
prefixBasedRoutingRUriHandling Request URI Handling Indicates how to handle the host part of the Request URI. * None: Leave the request URI unmodified. * Update: Update the host part of the Request URI with the d…	Enumerationr/w Enumerated Values: 100 none 200 update 300 replace	.0.4400.1.150.100.1.600
prefixBasedRoutingForceTransport Force Transport Force the use of a selected transport protocol when initiating SIP dialogs. Supersedes what is defined in the Call Agent. * None: Transport is not forced. Will use UDP if …	Enumerationr/w Enumerated Values: 100 none 200 tCP 300 uDP 400 tLS	.0.4400.1.150.100.1.700
prefixBasedRoutingConfigStatus Configuration Status Configuration status of the row. Indicates if the PrefixBasedRouting entry is valid and ready to be applied. * Valid: The current content of the row is…	Enumeration Enumerated Values: 100 valid 200 invalidCa 300 noPrefix 400 invalidDestination 500 destinationOverrideMandatory 600 prefixDuplicate 700 invalidConfig	.0.4400.1.150.100.1.1000
prefixBasedRoutingDelete Delete Delete this entry from the table.	Enumerationr/w Enumerated Values: 0 noOp 10 delete	.0.4400.1.150.100.1.10000

Static Registration
          
This table contains the Static Registration entries.
          
It is used by Rulesets to validate or to update, with the
table's content, various fields of a SIP request.
          
The changes to this table take effect immediately.

staticRegistrationEntry row .0.4400.1.170.100.1

A row in table Static Registration.

Indexes

staticRegistrationRegistrationId

Column	Syntax	OID
staticRegistrationRegistrationId Registration Id Unique numerical identifier for this registration entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.170.100.1.100
staticRegistrationAor Address of Record The address of record, in URI format, of this registration entry. For example: sip:alice@example.com This value must be unique within the table.	OctetStringr/w Constraints: range: 0-50	.0.4400.1.170.100.1.200
staticRegistrationContact Contact The SIP contact, in URI format, used for this registration entry. For example: sip:5551212@192.168.11.23:5060	OctetStringr/w Constraints: range: 0-50	.0.4400.1.170.100.1.300
staticRegistrationConfigStatus Configuration Status Configuration status of the row. Indicates if the StaticRegistration entry is valid and ready to be applied. * Valid: The current content of the row is…	Enumeration Enumerated Values: 100 valid 200 aorDuplicate 300 invalidConfig	.0.4400.1.170.100.1.1000
staticRegistrationDelete Delete Delete this entry from the table.	Enumerationr/w Enumerated Values: 0 noOp 10 delete	.0.4400.1.170.100.1.10000

Call Agent Status
          
This table displays the status and the active configuration of
the Call Agents.

callAgentStatusEntry row .0.4400.1.200.100.1

A row in table Call Agent Status.

Indexes

callAgentStatusId

Column	Syntax	OID
callAgentStatusId Id Unique numerical identifier for a Call Agent. The Call Agent ID is used by other parameters included in the Status Group to refer to a Call Agent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.100.1.100
callAgentStatusName Name Call Agent name. This name is displayed everywhere the Call Agent is used in the Management Interface.	OctetString Constraints: range: 0-100	.0.4400.1.200.100.1.200
callAgentStatusSignalingInterface Signaling Interface ID of the Signaling Interface used by this Call Agent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.100.1.300
callAgentStatusMediaInterface Media Interface ID of the Media Interface used by this Call Agent.	OctetString	.0.4400.1.200.100.1.400
callAgentStatusGateway Gateway Name of the local gateway to be used by this Call Agent. When no local gateway is selected, the Call Agent will use an external peer.	OctetString Constraints: range: 0-100	.0.4400.1.200.100.1.500
callAgentStatusPeerHost IP address of the peer Resolved IP address of the peer.	MX-TCMxIpAddress Type Constraints: range: 0..255	.0.4400.1.200.100.1.600
callAgentStatusState State State of the call agent. * Active: The Call Agent is active. * NetworkDown: The Call Agent is inactive because the network is down.	Enumeration Enumerated Values: 100 active 200 networkDown 300 internalError 400 peerDown	.0.4400.1.200.100.1.700

Signaling Interfaces
          
This table displays the active configuration of the Signaling
Interfaces.

signalingInterfaceStatusEntry row .0.4400.1.200.200.1

A row in table Signaling Interfaces.

Indexes

signalingInterfaceStatusId

Column	Syntax	OID
signalingInterfaceStatusId Id Unique numerical identifier for a Signaling Interface. The Signaling Interface ID is used by other parameters included in the Status Group to refer to this Signaling Interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.200.1.100
signalingInterfaceStatusName Name Signaling Interface name. This name is displayed everywhere the Signaling Interface is used in the Management Interface.	OctetString Constraints: range: 0-100	.0.4400.1.200.200.1.200
signalingInterfaceStatusNetworkInterface Network Interface The name of the BNI Network Interface on which this Signaling Interface is attached.	OctetString	.0.4400.1.200.200.1.300
signalingInterfaceStatusPort Port Signaling port number on which requests are sent and received.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.200.1.400
signalingInterfaceStatusSecurePort Secure Port Signaling Secure Port number.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.200.1.450
signalingInterfaceStatusTlsMode TLS Mode The TLS mode that this signaling interface uses.	Enumeration Enumerated Values: 100 both 200 client 300 server	.0.4400.1.200.200.1.475
signalingInterfaceStatusAllowedTransports Allowed Transports Transport protocols allowed on the Signaling Interface. The possible values are: * All: The Signaling Interface has no restriction on the transport protocol. It sup…	Enumeration Enumerated Values: 100 all 200 tlsOnly	.0.4400.1.200.200.1.485
signalingInterfaceStatusPublicIpAddr Public Ip Address Public IP address for near-end NAT traversal.	MX-TCMxIpAddress Type Constraints: range: 0..255	.0.4400.1.200.200.1.500
signalingInterfaceStatusTcpConnectTimeout Tcp Connection Timeout TCP connection timeout, in milliseconds, for connections initiated by the SBC.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.200.1.600
signalingInterfaceStatusTcpIdleTimeout Tcp Idle Timeout Idle timeout, in milliseconds, after which a TCP connection is closed. Special value '0' means there is no idle timeout.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.200.1.700
signalingInterfaceStatusIpAddress IP Address Current local IP address of this Signaling Interface.	MX-TCMxIpAddress Type Constraints: range: 0..255	.0.4400.1.200.200.1.800
signalingInterfaceStatusState State State * Active: The Signaling Interface is active. * NetworkDown: The Signaling Interface is inactive because the network is down. * NoIpAddress: The Signaling Interface is …	Enumeration Enumerated Values: 100 active 200 networkDown 300 noIpAddress	.0.4400.1.200.200.1.900

Media Interfaces Status
          
This table displays the active configuration of the Media
Interfaces.

mediaInterfaceStatusEntry row .0.4400.1.200.300.1

A row in table Media Interfaces Status.

Indexes

mediaInterfaceStatusId

Column	Syntax	OID
mediaInterfaceStatusId Id Unique numerical identifier for a Media Interface. The Media Interface ID is used by other parameters in the Status Group to refer to this Media Interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.300.1.100
mediaInterfaceStatusName Name Media Interface name. This name is displayed everywhere the Media Interface is used in the Management Interface.	OctetString Constraints: range: 0-100	.0.4400.1.200.300.1.200
mediaInterfaceStatusNetworkInterface Network Interface The name of the BNI Network Interface the Signaling Interface is linked to.	OctetString	.0.4400.1.200.300.1.300
mediaInterfaceStatusPortRange Port range Range of ports assigned to send and receive media traffic.	OctetString Constraints: range: 0-20	.0.4400.1.200.300.1.400
mediaInterfaceStatusPublicIpAddr Public Ip Address Public IP address for near-end NAT traversal.	MX-TCMxIpAddress Type Constraints: range: 0..255	.0.4400.1.200.300.1.500
mediaInterfaceStatusIpAddress IP Address Current local IP address of this Media Interface.	MX-TCMxIpAddress Type Constraints: range: 0..255	.0.4400.1.200.300.1.600
mediaInterfaceStatusState State State * Active: The Media Interface is active. * NetworkDown: The Media Interface is inactive because the network is down. * NoIpAddress: The Media Interface is inactive bec…	Enumeration Enumerated Values: 100 active 200 networkDown 300 noIpAddress	.0.4400.1.200.300.1.700

Call Agents Rulesets Status
          
This table displays the association of Rulesets to Call
Agents.

callAgentRulesetStatusEntry row .0.4400.1.200.400.1

A row in table Call Agents Rulesets Status.

Indexes

callAgentRulesetStatusId

Column	Syntax	OID
callAgentRulesetStatusId Id Unique numerical identifier for this Ruleset association.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.400.1.100
callAgentRulesetStatusCallAgent CallAgent ID of the CallAgent table entry to which this Ruleset is attached.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.400.1.200
callAgentRulesetStatusPriority Priority Priority of execution of this Ruleset on that Call Agent. Inbound rules of the Ruleset are executed in ascending priority order. Outbound rules are executed in descending priority …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.400.1.300
callAgentRulesetStatusRuleset Ruleset Name of the Ruleset to which the Call Agent is attached.	OctetString Constraints: range: 0-48	.0.4400.1.200.400.1.400
callAgentRulesetStatusParameters Parameters List of ruleset parameters and their value.	OctetString Constraints: range: 0-512	.0.4400.1.200.400.1.500

Routing Rules Status
          
This table contains the configuration of the routing rules.

routingRulesStatusEntry row .0.4400.1.200.500.1

A row in table Routing Rules Status.

Indexes

routingRulesStatusId

Column	Syntax	OID
routingRulesStatusId Id Unique numerical identifier for this RoutingRulesStatus table entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.500.1.100
routingRulesStatusPriority Priority Priority of execution of the Routing Rulesets.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.500.1.200
routingRulesStatusRuleset Ruleset Name of the routing ruleset.	OctetString Constraints: range: 0-48	.0.4400.1.200.500.1.300
routingRulesStatusParameters Parameters List of routing ruleset parameters and their value.	OctetString Constraints: range: 0-512	.0.4400.1.200.500.1.400

Registration Agent Status
          
This table displays the state of the Registration Agent's
Subscribers

registrationAgentStatusEntry row .0.4400.1.200.600.1

A row in table Registration Agent Status.

Indexes

registrationAgentStatusId

Column	Syntax	OID
registrationAgentStatusId Id Unique numerical identifier for a subscriber.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.200.600.1.100
registrationAgentStatusState State The current state of the registration. * Registering: The registration is currently trying to register. * Registered: The registration is successfully registered. * Refreshi…	Enumeration Enumerated Values: 200 registering 300 registered 400 refreshing 600 unreachable 800 rejected 1000 invalidResponse 1100 notFound 1200 unknown	.0.4400.1.200.600.1.200

Call Agent Statistics
          
This table contains the statistics related to a Call Agent.
          
Statistics are collected as soon as the SBC service is
started.

callAgentStatsEntry row .0.4400.1.300.200.1

A row in table Call Agent Statistics.

Indexes

callAgentStatsCallAgent

Column	Syntax	OID
callAgentStatsCallAgent CallAgent Id of the Call Agent associated with the statistics.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.300.200.1.100
callAgentStatsInboundCallAttempts Inbound Call Attempts Number of inbound call attempts for this Call Agent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.300.200.1.200
callAgentStatsOutboundCallAttempts Outbound Call Attempts Number of outbound call attempts for this Call Agent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.300.200.1.300
callAgentStatsInboundCallCompleted Inbound Calls Completed Number of completed inbound calls for this Call Agent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.300.200.1.400
callAgentStatsOutboundCallCompleted Outbound Calls Completed Number of completed outbound calls for this Call Agent.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.4400.1.300.200.1.500