MX-POTS-MIB Table View

Line Table
          
This table shows the current available lines and allows their
basic configuration.

lineEntry row .0.1800.1.100.1

A row in table Line Table.

Indexes

lineId

Column	Syntax	OID
lineId Line Identifier String that identifies a line in other tables.	OctetString	.0.1800.1.100.1.100
lineTypeStatus Line Type Status The status POTS type of the line.	Enumeration Enumerated Values: 100 fxs 200 fxo	.0.1800.1.100.1.200
lineState State The current call control state for this channel: * Idle: The line is available * InUse: The line is currently used * Disabled: The line is disabled * Bypass: The line is on by…	Enumeration Enumerated Values: 100 idle 200 inUse 300 disabled 400 bypass 500 down	.0.1800.1.100.1.300

FXS Bypass Table
          
This table shows the current available FXS bypass and allows
their basic configuration.

fxsBypassEntry row .0.1800.1.10000.10100.1000.1

A row in table FXS Bypass Table.

Indexes

fxsBypassId

Column	Syntax	OID
fxsBypassId Line Identifier String that identifies a line in other tables.	OctetString	.0.1800.1.10000.10100.1000.1.100
fxsBypassActivation FXS Bypass Activation Specifies when the bypass needs to be activated. * PowerOff: The bypass is activated only when the unit power is off or the POTS service is not started. * Endp…	Enumerationr/w Enumerated Values: 100 powerOff 200 endpointDisabled 300 onDemand	.0.1800.1.10000.10100.1000.1.200
fxsBypassActivationDtmfMap FXS Bypass Activation DTMF Map Specifies the DTMF to signal to enable the bypass. This parameter is only used when the FxsBypass.Activation parameter is set to 'OnDemand'.	MX-TCMxDigitMapr/w Type Constraints: range: 0..127	.0.1800.1.10000.10100.1000.1.300
fxsBypassDeactivationTimeout FXS Bypass Deactivation Timeout Specifies the delay to wait before deactivating the bypass after an on hook if the bypass is activated on demand. The delay is restarted after each on hook. The bypass is n…	Unsigned32r/w Constraints: range: 0-3600	.0.1800.1.10000.10100.1000.1.400

Specific FXS Message Waiting Indicator Configuration
          
This table allows to configure the message waiting indicator
feature for a specific FXS line.

fxsSpecificMessageWaitingIndicatorEntry row .0.1800.1.10000.10200.200.1

A row in table Specific FXS Message Waiting Indicator
Configuration .

Indexes

fxsSpecificMessageWaitingIndicatorId

Column	Syntax	OID
fxsSpecificMessageWaitingIndicatorId Line Identifier String that identifies a line in other tables.	OctetString	.0.1800.1.10000.10200.200.1.100
fxsSpecificMessageWaitingIndicatorEnableConfig Enable Configuration Defines the configuration to use for a specific line. * Disable: The line uses the default configuration as defined in the FxsDefaultMessageWaitingIndicatorAc…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1800.1.10000.10200.200.1.200
fxsSpecificMessageWaitingIndicatorActivation Specific FXS Message Waiting Indicator Activation. Configure the Message Waiting Indicator for a specific FXS line. When used in conjunction with a voice-messaging system, the Message Waiti…	Enumerationr/w Enumerated Values: 100 disabled 200 tone 300 visual 400 toneAndVisual	.0.1800.1.10000.10200.200.1.300

FXS Distinctive Ring
          
This table allows to override the default country ring
configuration. The configuration applies to all interfaces.

fxsDistinctiveRingEntry row .0.1800.1.10000.10500.100.1

A row in table FXS Distinctive Ring.

Indexes

fxsDistinctiveRingIndex

Column	Syntax	OID
fxsDistinctiveRingIndex Row Index Unique identifier of the row in the table.	Unsigned32 Constraints: range: 1-4	.0.1800.1.10000.10500.100.1.100
fxsDistinctiveRingRingId Ring ID Identification of the distinctive ring. When the RingId parameter is defined and the incoming call property 'distinctive-ring' matches with it, the corresponding ring pattern is used. Otherwise, t…	OctetStringr/w Constraints: range: 0-512	.0.1800.1.10000.10500.100.1.200
fxsDistinctiveRingPattern Pattern Pattern description of the distinctive ring. Used only if the RingId parameter is not empty. The format for a cadence is 'on, off, on, off, ...' where 'on' and 'off', respectively a…	OctetStringr/w Constraints: range: 0-512	.0.1800.1.10000.10500.100.1.300

FXS Caller Id
          
This table allows the caller id basic configuration. The
caller id configuration is endpoint specific.

fxsCallerIdEntry row .0.1800.1.10000.10600.100.1

A row in table FXS Caller Id.

Indexes

fxsCallerIdId

Column	Syntax	OID
fxsCallerIdId Line Identifier String that identifies a line in other tables.	OctetString	.0.1800.1.10000.10600.100.1.150
fxsCallerIdActivation Caller Id Activation Determines whether or not the FXS endpoint present the caller id on an incoming call. * Disable: The FXS endpoint does not present the caller id. * Enable: The FXS …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1800.1.10000.10600.100.1.300

FXO Answering Delay
          
This table holds the answering delay configuration. Each row
in this table configures the answering delay of a line.

fxoAnsweringDelayEntry row .0.1800.1.20000.5000.1

A row in table FXO Answering Delay.

Indexes

fxoAnsweringDelayId

Column	Syntax	OID
fxoAnsweringDelayId Line Identifier String that identifies a FXO line.	OctetString	.0.1800.1.20000.5000.1.100
fxoAnsweringDelayWaitBeforeAnsweringDelay FXO Wait Before Answering Delay The waiting period before answering an incoming FXO call. If this delay expires before the caller ID signal is decoded, the call proceeds without caller ID i…	Unsigned32r/w Constraints: range: 0-30000	.0.1800.1.20000.5000.1.200
fxoAnsweringDelayAnsweringOnCallerIdDetection FXO Answering On Caller ID Detection Enables answering upon caller ID detection instead of the waiting delay configured by WaitBeforeAnsweringDelay. When enabled, an incoming FXO call is an…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1800.1.20000.5000.1.300
fxoAnsweringDelayWaitForCalleeToAnswer FXO Wait For Callee To Answer Enable When the endpoint is set up for automatic call (see the EpServ.DefaultAutoCallEnable parameter), enabling this parameter makes the endpoint wait until the called party…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1800.1.20000.5000.1.400

FXO Incoming Call Behavior Table
          
Table that defines how each line behaves when there is an
incoming call.

fxoIncomingCallBehaviorEntry row .0.1800.1.20000.5100.1

A row in table FXO Incoming Call Behavior Table.

Indexes

fxoIncomingCallBehaviorId

Column	Syntax	OID
fxoIncomingCallBehaviorId Line Identifier String that identifies a FXO line.	OctetString	.0.1800.1.20000.5100.1.100
fxoIncomingCallBehaviorNotAllowedBehavior Not Allowed Behavior Under certain circumstances (locked port, configuration, etc...), incoming FXO calls are not allowed. When that is the case, the FXO endpoint behaves in one of the manners below. …	Enumerationr/w Enumerated Values: 100 doNotAnswer 200 playCongestionTone	.0.1800.1.20000.5100.1.200

FXO Custom Basic Parameters
          
This table allows to override the default country basic
parameters for the FXO lines. This table is effective only if
the OverrideDefaultCountryParameters parameter is enabled. If
the OverrideDefaultCountryParameters parameter is disabled,
the values set in the current row are not applied.
          
This parameters override is not supported on all hardware.

fxoCustomBasicParametersEntry row .0.1800.1.20000.5200.1

A row in table FXO Custom Basic Parameters.

Indexes

fxoCustomBasicParametersId

Column	Syntax	OID
fxoCustomBasicParametersId Line Identifier String that identifies a FXO line.	OctetString	.0.1800.1.20000.5200.1.100
fxoCustomBasicParametersOverrideDefaultCountryParameters Override Default Country Parameters Overrides the default country basic parameters for this FXO line. * Disable: The FXO line uses the default country values. The values set in the cu…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1800.1.20000.5200.1.200
fxoCustomBasicParametersImpedance Impedance AC Impedance for the FXO line. Not all values are supported on all hardware. Impedance values are: * I600: 600 ohms. * I600LongLoop: 350 ohms + (…	Enumerationr/w Enumerated Values: 100 i600 200 i600LongLoop 300 i900 400 australia 500 austria 600 belgium 700 brazil 800 china 900 czechRepublic 1000 denmark 1100 finland 1200 france 1300 germany 1400 greece 1500 italy 1600 japan 1700 netherlands 1800 newZealand 1900 norway 2000 russia 2100 slovakia 2200 spain 2300 sweden 2400 uK	.0.1800.1.20000.5200.1.300
fxoCustomBasicParametersDigitalHybrid FXO digital hybrid coefficients The digital hybrid filter is applied over the Impedance, and helps reduce near-end echo. Contact the Media5 Technical Assistance Center for support on how to…	OctetStringr/w Constraints: range: 0-512	.0.1800.1.20000.5200.1.400
fxoCustomBasicParametersReset Reset Resets the FXO basic parameter values with the default country values. This command is used to retrieve the default country values.	Enumerationr/w Enumerated Values: 0 noOp 10 reset	.0.1800.1.20000.5200.1.10000

FXO Link State
          
A table of link state updated by the link state verification
mechanism.

fxoLinkStateEntry row .0.1800.1.20000.10100.100.1

A row in table FXO Link State.

Indexes

fxoLinkStateId

Column	Syntax	OID
fxoLinkStateId Line Identifier String that identifies a FXO line.	OctetString	.0.1800.1.20000.10100.100.1.100
fxoLinkStateLinkState FXO Line State Link state as reported by the link state verification mechanism. The link state verification can be enabled by using the FxoLinkStateVerification parameter object. The unit d…	Enumeration Enumerated Values: 100 unknown 200 up 300 down	.0.1800.1.20000.10100.100.1.200