MX-HARDWARE-MIB Table View

PRI Ports Status
          
This table displays the status of each PRI port.

portsStatusEntry row .0.40000.1.2000.100.1

A row in table PRI Ports Status.

Indexes

portsStatusPort

Column	Syntax	OID
portsStatusPort Port Indicates the name of the port.	OctetString	.0.40000.1.2000.100.1.100
portsStatusLineType Line Type Defines the line type.	Enumeration Enumerated Values: 100 e1 200 t1	.0.40000.1.2000.100.1.300
portsStatusSignaling Signaling Defines the signaling protocol used by this port.	Enumeration Enumerated Values: 100 isdn 200 r2 300 eam	.0.40000.1.2000.100.1.400

PRI Ports Configuration
          
The settings of each PRI port are configured in this table.

portsEntry row .0.40000.1.2000.200.1

A row in table PRI Ports Configuration.

Indexes

portsPort

Column	Syntax	OID
portsPort Port Indicates the name of the port.	OctetString	.0.40000.1.2000.200.1.100
portsLineType Line Type Defines the line type. * T1: DS1 T-Carrier Signaling * E1: E1 E-Carrier Signaling Note: The value T1 is not valid when the Ports.Signaling parameter is set to R…	Enumerationr/w Enumerated Values: 100 e1 200 t1	.0.40000.1.2000.200.1.300
portsSignaling Signaling Defines the signaling protocol used by this port. * Isdn: Integrated Services Digital Network * R2: E1-R2 CAS signaling protocol. * Eam: E&M CAS signaling protocol. …	Enumerationr/w Enumerated Values: 100 isdn 200 r2 300 eam	.0.40000.1.2000.200.1.400

Statistics table of each PRI port.

statsInfoEntry row .0.40000.1.2000.1000.100.1

A row in table .

Indexes

statsInfoPort

Column	Syntax	OID
statsInfoPort Port The name of the port.	OctetString	.0.40000.1.2000.1000.100.1.100
statsInfoFramesTransmitted Frames Transmitted Number of HDLC frames transmitted. Note: Frames do not refer to the structure defined in I.431.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.200
statsInfoFramesReceived Frames Received Number of HDLC frames received. Note: Frames do not refer to the structure defined in I.431.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.300
statsInfoOctetsTransmitted Octets Transmitted Number of octets transmitted. This value is obtained by cumulating the octets transmitted in the HDLC frames. Note: Frames do not refer to the structure defined in I.431.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.400
statsInfoOctetsReceived Octets Received Number of octets received. This value is obtained by cumulating the octets received in the HDLC frames. Note: Frames do not refer to the structure defined in I.431.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.500
statsInfoFcsErrors FCS Errors Frame check sequence (FCS) errors indicate that frames of data are being corrupted during transmission. FCS error count is the number of frames that were received with a bad checksum (CRC value…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.600
statsInfoFramesDropped Frames Dropped Number of frames dropped. This value is obtained by cumulating the number of frames dropped when transferring data from the framer chip to the device internal buffer. This va…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.700
statsInfoOctetsDropped Octets Dropped Number of octets dropped. This value is obtained by cumulating the number of octets dropped when transferring data from the framer chip to the device internal buffer. This va…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.800
statsInfoNegativeFrameSlipsTransmitted Negative Frame Slips Transmitted A frame is skipped when the frequency of the transmit clock is greater than the frequency of the transmit system interface working clock (2.048 MHz on E1 or 1.544 MHz on T…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.900
statsInfoNegativeFrameSlipsReceived Negative Frame Slips Received A frame is skipped when the frequency of the received route clock is greater than the frequency of the receive system interface working clock (2.048 MHz on E1 or 1.544 MHz on…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.1000
statsInfoPositiveFrameSlipsTransmitted Positive Frame Slips Transmitted A frame is repeated when the frequency of the transmit clock is less than the frequency of the transmit system interface working clock (2.048 MHz on E1 or 1.544 MHz on T1)…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.1100
statsInfoPositiveFrameSlipsReceived Positive Frame Slips Received A frame is repeated when the frequency of the receive route clock is less than the frequency of the receive system interface working clock (2.048 MHz on E1 or 1.544 MHz on T1…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.1200
statsInfoFramingErrors Framing Error The framing error count indicates that a FAS (Frame Alignment Signal) word has been received with an error. The FAS-bits are present in every even frame of timeslot 0 on E1. …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.1300
statsInfoCodeViolations Code Violations The code violations count indicates that an encoding error on the PCM line has been detected. This value is available on E1 and T1.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.1400
statsInfoCRCErrors CRC Errors The CRC errors count is incremented when a multiframe has been received with a CRC error. On E1, this counter is only available with the CRC line framing format. O…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.1500
statsInfoEBitErrors E-Bit Error The E-Bit error count gives information about the outgoing transmit PCM line if the E-bits are used by the remote end for submultiframe error indication. Incrementing is only possible in the m…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.1600
statsInfoBlockErrors Block Error The Block Error count is incremented once per multiframe if a multiframe has been received with a CRC error or if a bad frame alignment has been detected. This value is only ava…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.0.40000.1.2000.1000.100.1.1700
statsInfoResetStats Reset Stats Resets all statistics for the specified interface.	Enumerationr/w Enumerated Values: 0 noOp 10 resetStats	.0.40000.1.2000.1000.100.1.10000

BRI Ports Status
          
This table displays the status of each BRI port.

briPortsStatusEntry row .0.40000.1.3000.100.1

A row in table BRI Ports Status.

Indexes

briPortsStatusPort

Column	Syntax	OID
briPortsStatusPort Port Indicates the name of the port.	OctetString	.0.40000.1.3000.100.1.100
briPortsStatusPowerFeeding Power Feeding State Indicates the state of the power feeding for the port. * On: Power is fed to the line. * Off: Power is not fed to the line. * Unavailable: The power feeding featur…	Enumeration Enumerated Values: 100 on 200 off 300 unavailable 400 unsupported	.0.40000.1.3000.100.1.200

BRI Ports Configuration
          
The settings of each BRI port are configured in this table.

briPortsEntry row .0.40000.1.3000.200.1

A row in table BRI Ports Configuration.

Indexes

briPortsPort

Column	Syntax	OID
briPortsPort Port Indicates the name of the port.	OctetString	.0.40000.1.3000.200.1.100
briPortsPowerFeedingEnable Power Feeding Enable Enables or disables the power feeding for the port.	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.40000.1.3000.200.1.200