MPLS-LDP-GENERIC-STD-MIB
Copyright (C) The Internet Society (year). The
initial version of this MIB module was published
in RFC 3815. For full legal notices see the RFC
itself or see:
http://www.ietf.org/copyrights/ianamib.html
This MIB contains managed object definitions for
configuring and monitoring the Multiprotocol Label
Switching (MPLS), Label Distribution Protocol (LDP),
utilizing ethernet as the Layer 2 media.
- Source file
MPLS-LDP-GENERIC-STD-MIB- Last revised
- Identity
mplsLdpGenericStdMIB- Base OID
1.3.6.1.2.1.10.166.7
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| MPLS-LDP-STD-MIB | mplsLdpEntityIndex mplsLdpEntityLdpId |
| MPLS-TC-STD-MIB | mplsStdMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus StorageType |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MPLS-LDP-GENERIC-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MPLS-LDP-GENERIC-STD-MIB::mplsLdpGenericStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-LDP-GENERIC-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-LDP-GENERIC-STD-MIB::mplsLdpGenericStdMIB'
Objects (14)
Showing 14 of 14 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.10.166.7 |
||
.1.3.6.1.2.1.10.166.7.1 |
||
.1.3.6.1.2.1.10.166.7.1.1 |
||
.1.3.6.1.2.1.10.166.7.1.1.1 |
||
.1.3.6.1.2.1.10.166.7.1.1.1.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.10.166.7.1.1.1.1.1 |
|
|
Unsigned32
|
.1.3.6.1.2.1.10.166.7.1.1.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.166.7.1.1.1.1.3 |
|
.1.3.6.1.2.1.10.166.7.1.1.1.1.4 |
||
.1.3.6.1.2.1.10.166.7.1.1.1.1.5 |
||
.1.3.6.1.2.1.10.166.7.1.1.1.1.6 |
||
.1.3.6.1.2.1.10.166.7.2 |
||
.1.3.6.1.2.1.10.166.7.2.1 |
||
.1.3.6.1.2.1.10.166.7.2.2 |
Dependencies (14) 6 direct · 8 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
Conformance Groups (1)
|
mplsLdpEntityGenericLabelSpace mplsLdpEntityGenericIfIndexOrZero mplsLdpEntityGenericLRStorageType mplsLdpEntityGenericLRRowStatus
Objects that apply to all MPLS LDP implementations
using Generic Labels as the Layer 2. |
.1.3.6.1.2.1.10.166.7.2.1.1
|
Compliance Statements (2)
OID
.1.3.6.1.2.1.10.166.7.2.2.1The Module is implemented with support for
read-create and read-write. In other words,
both monitoring and configuration
are available when using this MODULE-COMPLIANCE.
read-create and read-write. In other words,
both monitoring and configuration
are available when using this MODULE-COMPLIANCE.
Required groups
| mandatory | mplsLdpGenericGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| mplsLdpEntityGenericLRRowStatus |
active(1)
|
Support for createAndWait and notInService is not required. |
OID
.1.3.6.1.2.1.10.166.7.2.2.2The Module is implemented with support for
read-only. In other words, only monitoring
is available by implementing this MODULE-COMPLIANCE.
read-only. In other words, only monitoring
is available by implementing this MODULE-COMPLIANCE.
Required groups
| mandatory | mplsLdpGenericGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| mplsLdpEntityGenericLabelSpace | readonly | Write access is not required. | |
| mplsLdpEntityGenericIfIndexOrZero | readonly | Write access is not required. | |
| mplsLdpEntityGenericLRStorageType | readonly | Write access is not required. | |
| mplsLdpEntityGenericLRRowStatus | readonly |
active(1)
|
Write access is not required, and active is the only status that needs to be supported. |