MPLS-LC-FR-STD-MIB

        This MIB module contains managed object definitions for
MPLS Label-Controlled Frame-Relay interfaces as defined
in (RFC3034).
        
Copyright (C) The Internet Society (2006).  This
version of this MIB module is part of RFC 4368; see
the RFC itself for full legal notices.
    
Source file
MPLS-LC-FR-STD-MIB
Last revised
Identity
mplsLcFrStdMIB
Base OID
1.3.6.1.2.1.10.166.10
Imported Objects
FRAME-RELAY-DTE-MIB DLCI
MPLS-LSR-STD-MIB mplsInterfaceIndex
MPLS-TC-STD-MIB mplsStdMIB
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC RowStatus StorageType
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MPLS-LC-FR-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MPLS-LC-FR-STD-MIB::mplsLcFrStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-LC-FR-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-LC-FR-STD-MIB::mplsLcFrStdMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (14)
.1.3.6.1.2.1.10.166.10
.1.3.6.1.2.1.10.166.10.0
.1.3.6.1.2.1.10.166.10.1
.1.3.6.1.2.1.10.166.10.1.1
.1.3.6.1.2.1.10.166.10.1.1.1
.1.3.6.1.2.1.10.166.10.1.1.1.1
.1.3.6.1.2.1.10.166.10.1.1.1.2
.1.3.6.1.2.1.10.166.10.1.1.1.3
.1.3.6.1.2.1.10.166.10.1.1.1.4
.1.3.6.1.2.1.10.166.10.1.1.1.5
.1.3.6.1.2.1.10.166.10.1.1.1.6
.1.3.6.1.2.1.10.166.10.2
.1.3.6.1.2.1.10.166.10.2.1
.1.3.6.1.2.1.10.166.10.2.2
Dependencies (14) 6 direct · 8 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (1)
Compliance Statements (2)

OID .1.3.6.1.2.1.10.166.10.2.1.1
Compliance statement for agents that provide
full support for MPLS-LC-FR-STD-MIB. Such
devices can be monitored and also be configured
using this MIB module.
Required groups
Object refinements
ObjectAccessSyntaxDescription
mplsLcFrStdInterfaceConfRowStatus
active(1), notInService(2)
Support for createAndWait and notReady is
not required.

OID .1.3.6.1.2.1.10.166.10.2.1.2
Compliance requirement for implementations that only
provide read-only support for MPLS-LC-FR-STD-MIB.
Such devices can be monitored but cannot be configured
using this MIB module.
Required groups
Object refinements
ObjectAccessSyntaxDescription
mplsLcFrStdTrafficMinDlci readonly
Write access is not required.
mplsLcFrStdTrafficMaxDlci readonly
Write access is not required.
mplsLcFrStdCtrlMinDlci readonly
Write access is not required.
mplsLcFrStdCtrlMaxDlci readonly
Write access is not required.
mplsLcFrStdInterfaceConfRowStatus readonly
active(1)
Write access is not required.
mplsLcFrStdInterfaceConfStorageType readonly
Write access is not required.