MALLOC-MIB
The MIB module for management of multicast address
allocation.
Copyright (C) The Internet Society (2003). This version of
this MIB module is part of RFC 3559; see the RFC itself for
full legal notices.
- Source file
MALLOC-MIB- Last revised
- Identity
mallocMIB- Base OID
1.3.6.1.2.1.101
Imported Objects
| IANA-MALLOC-MIB | IANAmallocRangeSource IANAscopeSource |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| IPMROUTE-STD-MIB | LanguageTag |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Gauge32 mib-2 MODULE-IDENTITY (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MALLOC-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MALLOC-MIB::mallocMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MALLOC-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MALLOC-MIB::mallocMIB'
Objects (82)
Showing 82 of 82 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.101 |
||
.1.3.6.1.2.1.101.1 |
||
.1.3.6.1.2.1.101.1.1 |
||
|
Bits
|
.1.3.6.1.2.1.101.1.1.1 |
|
.1.3.6.1.2.1.101.1.1.2 |
||
.1.3.6.1.2.1.101.1.1.2.1 |
||
.1.3.6.1.2.1.101.1.1.2.1.1 |
||
|
|
.1.3.6.1.2.1.101.1.1.2.1.10 |
|
.1.3.6.1.2.1.101.1.1.2.1.11 |
||
|
OctetString
|
.1.3.6.1.2.1.101.1.1.2.1.2 |
|
|
OctetString
|
.1.3.6.1.2.1.101.1.1.2.1.3 |
|
|
Unsigned32
|
.1.3.6.1.2.1.101.1.1.2.1.4 |
|
.1.3.6.1.2.1.101.1.1.2.1.5 |
||
.1.3.6.1.2.1.101.1.1.2.1.6 |
||
.1.3.6.1.2.1.101.1.1.2.1.7 |
||
.1.3.6.1.2.1.101.1.1.2.1.8 |
||
.1.3.6.1.2.1.101.1.1.2.1.9 |
||
.1.3.6.1.2.1.101.1.1.3 |
||
.1.3.6.1.2.1.101.1.1.3.1 |
||
|
OctetString
|
.1.3.6.1.2.1.101.1.1.3.1.1 |
|
.1.3.6.1.2.1.101.1.1.3.1.2 |
||
.1.3.6.1.2.1.101.1.1.3.1.3 |
||
.1.3.6.1.2.1.101.1.1.3.1.4 |
||
.1.3.6.1.2.1.101.1.1.3.1.5 |
||
.1.3.6.1.2.1.101.1.1.4 |
||
.1.3.6.1.2.1.101.1.1.4.1 |
||
|
OctetString
|
.1.3.6.1.2.1.101.1.1.4.1.1 |
|
.1.3.6.1.2.1.101.1.1.4.1.10 |
||
.1.3.6.1.2.1.101.1.1.4.1.11 |
||
.1.3.6.1.2.1.101.1.1.4.1.12 |
||
.1.3.6.1.2.1.101.1.1.4.1.13 |
||
.1.3.6.1.2.1.101.1.1.4.1.14 |
||
.1.3.6.1.2.1.101.1.1.4.1.15 |
||
|
OctetString
|
.1.3.6.1.2.1.101.1.1.4.1.2 |
|
.1.3.6.1.2.1.101.1.1.4.1.3 |
||
.1.3.6.1.2.1.101.1.1.4.1.4 |
||
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.101.1.1.4.1.5 |
|
.1.3.6.1.2.1.101.1.1.4.1.6 |
||
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.101.1.1.4.1.7 |
|
.1.3.6.1.2.1.101.1.1.4.1.8 |
||
.1.3.6.1.2.1.101.1.1.4.1.9 |
||
.1.3.6.1.2.1.101.1.1.5 |
||
.1.3.6.1.2.1.101.1.1.5.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.101.1.1.5.1.1 |
|
.1.3.6.1.2.1.101.1.1.5.1.10 |
||
.1.3.6.1.2.1.101.1.1.5.1.11 |
||
|
OctetString
|
.1.3.6.1.2.1.101.1.1.5.1.12 |
|
.1.3.6.1.2.1.101.1.1.5.1.2 |
||
.1.3.6.1.2.1.101.1.1.5.1.3 |
||
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.101.1.1.5.1.4 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.101.1.1.5.1.5 |
|
.1.3.6.1.2.1.101.1.1.5.1.6 |
||
|
Enumeration
|
.1.3.6.1.2.1.101.1.1.5.1.7 |
|
.1.3.6.1.2.1.101.1.1.5.1.8 |
||
.1.3.6.1.2.1.101.1.1.5.1.9 |
||
.1.3.6.1.2.1.101.1.1.6 |
||
.1.3.6.1.2.1.101.1.1.6.1 |
||
.1.3.6.1.2.1.101.1.1.6.1.1 |
||
|
OctetString
|
.1.3.6.1.2.1.101.1.1.6.1.2 |
|
.1.3.6.1.2.1.101.1.1.6.1.3 |
||
.1.3.6.1.2.1.101.1.1.6.1.4 |
||
.1.3.6.1.2.1.101.1.2 |
||
.1.3.6.1.2.1.101.1.2.1 |
||
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.101.1.2.1.1 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.101.1.2.1.2 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.101.1.2.1.3 |
|
|
secondsUnsigned32
|
.1.3.6.1.2.1.101.1.2.1.4 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.101.1.2.1.5 |
|
.1.3.6.1.2.1.101.1.2.2 |
||
.1.3.6.1.2.1.101.1.2.2.1 |
||
.1.3.6.1.2.1.101.1.2.2.10 |
||
.1.3.6.1.2.1.101.1.2.2.2 |
||
.1.3.6.1.2.1.101.1.2.2.3 |
||
.1.3.6.1.2.1.101.1.2.2.4 |
||
.1.3.6.1.2.1.101.1.2.2.5 |
||
.1.3.6.1.2.1.101.1.2.2.6 |
||
.1.3.6.1.2.1.101.1.2.2.7 |
||
.1.3.6.1.2.1.101.1.2.2.8 |
||
.1.3.6.1.2.1.101.1.2.2.9 |
||
.1.3.6.1.2.1.101.2 |
||
.1.3.6.1.2.1.101.2.1 |
||
.1.3.6.1.2.1.101.2.2 |
Dependencies (11) 7 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANA-MALLOC-MIBrfc
- INET-ADDRESS-MIBrfc
- IANA-RTPROTO-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- IPMROUTE-STD-MIBrfc
- MALLOC-MIBrfcselected
Conformance Groups (7)
Compliance Statements (6)
OID
.1.3.6.1.2.1.101.2.1.1The compliance statement for multicast address allocation
servers implementing the MALLOC MIB without support for
read-create (i.e., in read-only mode). Such a server can
then be monitored but can not be configured with this MIB.
servers implementing the MALLOC MIB without support for
read-create (i.e., in read-only mode). Such a server can
then be monitored but can not be configured with this MIB.
Required groups
| mandatory | mallocBasicGroup | |
| mandatory | mallocServerGroup | |
| optional | madcapServerGroup |
This group is mandatory for servers which implement the MADCAP client-server protocol. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| mallocScopeLastAddress | readonly | Write access is not required. | |
| mallocScopeHopLimit | readonly | Write access is not required. | |
| mallocScopeStatus | readonly | Write access is not required. | |
| mallocScopeDivisible | readonly | Write access is not required. | |
| mallocScopeSSM | readonly | Write access is not required. | |
| mallocScopeStorage | readonly | Write access is not required. | |
| mallocScopeNameScopeName | readonly | Write access is not required. | |
| mallocScopeNameDefault | readonly | Write access is not required. | |
| mallocScopeNameStatus | readonly | Write access is not required. | |
| mallocScopeNameStorage | readonly | Write access is not required. | |
| mallocAllocRangeLastAddress | readonly | Write access is not required. | |
| mallocAllocRangeStatus | readonly | Write access is not required. | |
| mallocAllocRangeLifetime | readonly | Write access is not required. | |
| mallocAllocRangeMaxLeaseAddrs | readonly | Write access is not required. | |
| mallocAllocRangeMaxLeaseTime | readonly | Write access is not required. | |
| mallocAllocRangeStorage | readonly | Write access is not required. | |
| madcapConfigExtraAllocationTime | readonly | Write access is not required. | |
| madcapConfigOfferHold | readonly | Write access is not required. | |
| madcapConfigResponseCacheInterval | readonly | Write access is not required. | |
| madcapConfigClockSkewAllowance | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.101.2.1.2The compliance statement for clients implementing the
MALLOC MIB without support for read-create (i.e., in read-
only mode). Such clients can then be monitored but can not
be configured with this MIB.
MALLOC MIB without support for read-create (i.e., in read-
only mode). Such clients can then be monitored but can not
be configured with this MIB.
Required groups
| mandatory | mallocBasicGroup | |
| mandatory | mallocClientGroup | |
| optional | mallocClientScopeGroup |
This group is mandatory for clients which maintain a list of multicast scopes. |
| optional | madcapClientGroup |
This group is mandatory for clients which implement the MADCAP client-server protocol. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| mallocScopeLastAddress | readonly | Write access is not required. | |
| mallocScopeHopLimit | readonly | Write access is not required. | |
| mallocScopeStatus | readonly | Write access is not required. | |
| mallocScopeServerAddressType | readonly | Write access is not required. | |
| mallocScopeServerAddress | readonly | Write access is not required. | |
| mallocScopeSSM | readonly | Write access is not required. | |
| mallocScopeStorage | readonly | Write access is not required. | |
| madcapConfigNoResponseDelay | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.101.2.1.3The compliance statement for prefix coordinators
implementing the MALLOC MIB without support for read-create
(i.e., in read-only mode). Such devices can then be
monitored but can not be configured with this MIB.
implementing the MALLOC MIB without support for read-create
(i.e., in read-only mode). Such devices can then be
monitored but can not be configured with this MIB.
Required groups
| mandatory | mallocBasicGroup | |
| mandatory | mallocPrefixCoordinatorGroup |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| mallocScopeLastAddress | readonly | Write access is not required. | |
| mallocScopeDivisible | readonly | Write access is not required. | |
| mallocAllocRangeLastAddress | readonly | Write access is not required. | |
| mallocAllocRangeStatus | readonly | Write access is not required. | |
| mallocAllocRangeLifetime | readonly | Write access is not required. | |
| mallocAllocRangeAdvertisable | readonly | Write access is not required. | |
| mallocAllocRangeStorage | readonly | Write access is not required. |
OID
.1.3.6.1.2.1.101.2.1.4The compliance statement for multicast address allocation
servers implementing the MALLOC MIB with support for read-
create. Such servers can then be both monitored and
configured with this MIB.
servers implementing the MALLOC MIB with support for read-
create. Such servers can then be both monitored and
configured with this MIB.
Required groups
| mandatory | mallocBasicGroup | |
| mandatory | mallocServerGroup | |
| optional | madcapServerGroup |
This group is mandatory for servers which implement the MADCAP client-server protocol. |
OID
.1.3.6.1.2.1.101.2.1.5The compliance statement for hosts implementing the MALLOC
MIB with support for read-create. Such clients can then be
both monitored and configured with this MIB.
MIB with support for read-create. Such clients can then be
both monitored and configured with this MIB.
Required groups
| mandatory | mallocBasicGroup | |
| mandatory | mallocClientGroup | |
| optional | mallocClientScopeGroup |
This group is mandatory for clients which maintain a list of multicast scopes. |
| optional | madcapClientGroup |
This group is mandatory for clients which implement the MADCAP client-server protocol. |
OID
.1.3.6.1.2.1.101.2.1.6The compliance statement for prefix coordinators
implementing the MALLOC MIB with support for read-create.
Such devices can then be both monitored and configured with
this MIB.
implementing the MALLOC MIB with support for read-create.
Such devices can then be both monitored and configured with
this MIB.
Required groups
| mandatory | mallocBasicGroup | |
| mandatory | mallocPrefixCoordinatorGroup |