IPMROUTE-STD-MIB

        The MIB module for management of IP Multicast routing, but
independent of the specific multicast routing protocol in
use.
    
Source file
IPMROUTE-STD-MIB
Last revised
Identity
ipMRouteStdMIB
Base OID
1.3.6.1.2.1.83
Imported Objects
IANA-RTPROTO-MIB IANAipMRouteProtocol IANAipRouteProtocol
IF-MIB InterfaceIndex InterfaceIndexOrZero
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Counter64 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks
SNMPv2-TC RowStatus TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IPMROUTE-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IPMROUTE-STD-MIB::ipMRouteStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPMROUTE-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPMROUTE-STD-MIB::ipMRouteStdMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (63)
.1.3.6.1.2.1.83
.1.3.6.1.2.1.83.1
.1.3.6.1.2.1.83.1.1
Enumeration
.1.3.6.1.2.1.83.1.1.1
.1.3.6.1.2.1.83.1.1.2
.1.3.6.1.2.1.83.1.1.2.1
.1.3.6.1.2.1.83.1.1.2.1.1
.1.3.6.1.2.1.83.1.1.2.1.10
.1.3.6.1.2.1.83.1.1.2.1.11
.1.3.6.1.2.1.83.1.1.2.1.12
.1.3.6.1.2.1.83.1.1.2.1.13
.1.3.6.1.2.1.83.1.1.2.1.14
Enumeration
.1.3.6.1.2.1.83.1.1.2.1.15
.1.3.6.1.2.1.83.1.1.2.1.16
.1.3.6.1.2.1.83.1.1.2.1.2
.1.3.6.1.2.1.83.1.1.2.1.3
.1.3.6.1.2.1.83.1.1.2.1.4
.1.3.6.1.2.1.83.1.1.2.1.5
.1.3.6.1.2.1.83.1.1.2.1.6
.1.3.6.1.2.1.83.1.1.2.1.7
.1.3.6.1.2.1.83.1.1.2.1.8
.1.3.6.1.2.1.83.1.1.2.1.9
.1.3.6.1.2.1.83.1.1.3
.1.3.6.1.2.1.83.1.1.3.1
.1.3.6.1.2.1.83.1.1.3.1.1
.1.3.6.1.2.1.83.1.1.3.1.10
.1.3.6.1.2.1.83.1.1.3.1.11
.1.3.6.1.2.1.83.1.1.3.1.2
.1.3.6.1.2.1.83.1.1.3.1.3
.1.3.6.1.2.1.83.1.1.3.1.4
.1.3.6.1.2.1.83.1.1.3.1.5
Enumeration
.1.3.6.1.2.1.83.1.1.3.1.6
.1.3.6.1.2.1.83.1.1.3.1.7
.1.3.6.1.2.1.83.1.1.3.1.8
.1.3.6.1.2.1.83.1.1.3.1.9
.1.3.6.1.2.1.83.1.1.4
.1.3.6.1.2.1.83.1.1.4.1
.1.3.6.1.2.1.83.1.1.4.1.1
Integer32
.1.3.6.1.2.1.83.1.1.4.1.2
.1.3.6.1.2.1.83.1.1.4.1.3
.1.3.6.1.2.1.83.1.1.4.1.4
.1.3.6.1.2.1.83.1.1.4.1.5
.1.3.6.1.2.1.83.1.1.4.1.6
.1.3.6.1.2.1.83.1.1.4.1.7
.1.3.6.1.2.1.83.1.1.4.1.8
.1.3.6.1.2.1.83.1.1.5
.1.3.6.1.2.1.83.1.1.5.1
.1.3.6.1.2.1.83.1.1.5.1.1
.1.3.6.1.2.1.83.1.1.5.1.2
.1.3.6.1.2.1.83.1.1.5.1.3
.1.3.6.1.2.1.83.1.1.5.1.4
.1.3.6.1.2.1.83.1.1.6
.1.3.6.1.2.1.83.1.1.6.1
.1.3.6.1.2.1.83.1.1.6.1.1
.1.3.6.1.2.1.83.1.1.6.1.2
.1.3.6.1.2.1.83.1.1.6.1.3
.1.3.6.1.2.1.83.1.1.6.1.4
.1.3.6.1.2.1.83.1.1.6.1.5
.1.3.6.1.2.1.83.1.1.6.1.6
.1.3.6.1.2.1.83.1.1.7
.1.3.6.1.2.1.83.2
.1.3.6.1.2.1.83.2.1
.1.3.6.1.2.1.83.2.2
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (1)
OctetString range: 1..100
Conformance Groups (7)
A collection of objects to support basic management of IP
Multicast routing.
.1.3.6.1.2.1.83.2.2.1
A collection of objects to support management of the use of
hop counts in IP Multicast routing.
.1.3.6.1.2.1.83.2.2.2
A collection of objects to support management of scoped
multicast address boundaries.
.1.3.6.1.2.1.83.2.2.3
A collection of objects to support management of packet
counters for each outgoing interface entry of a route.
.1.3.6.1.2.1.83.2.2.4
A collection of objects providing information specific to
high speed (greater than 20,000,000 bits/second) network
interfaces.
.1.3.6.1.2.1.83.2.2.5
A collection of objects providing information on the
relationship between multicast routing information, and the
IP Forwarding Table.
.1.3.6.1.2.1.83.2.2.6
A collection of objects to support management of packet
counters for each forwarding entry.
.1.3.6.1.2.1.83.2.2.7
Compliance Statements (1)

OID .1.3.6.1.2.1.83.2.1.1
The compliance statement for the IP Multicast MIB.
Required groups
mandatory ipMRouteMIBBasicGroup
mandatory ipMRouteMIBRouteGroup
optional ipMRouteMIBBoundaryGroup This group is mandatory if the router supports
administratively-scoped multicast address boundaries.
optional ipMRouteMIBHCInterfaceGroup This group is mandatory only for those network interfaces
for which the value of the corresponding instance of ifSpeed
is greater than 20,000,000 bits/second.
Object refinements
ObjectAccessSyntaxDescription
ipMRouteBoundaryStatus readonly
Write access is not required.
ipMRouteScopeNameStatus readonly
Write access is not required.