LUM-PORTDEVICEIF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
41
.1.3.6.1.4.1.8708.2.58.2.2.1 · 1 row entry · 29 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk portDevIfL1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PORTDEVICEIF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PORTDEVICEIF-MIB::portDevIfL1Table'
A table containing the parameters of the interfaces of all SDs.
portDevIfL1Entry row .1.3.6.1.4.1.8708.2.58.2.2.1.1
A list of objects containing the parameters of an interface of
an SD.
Column Syntax OID
Unique number identifying the portdev interface.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.8708.2.58.2.2.1.1.1
The management name of the nid customer interface, for example
'nid:1', where the first number indicates customer interface
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.58.2.2.1.1.2
User configurable label for the port device interface L2 Description .
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.58.2.2.1.1.3
The administrative alarm status of the port device interface.
Note that the portdevice interface is still active when set to down.
To shut down traffic, use the Administrative status from the NID General tab.
LUM-TCAdminStatusr/w
Type Values:
1down
2up
Description:
The administrative state with only up and down.

down - The interface should be inactive.

up - The interface should be activated.
.1.3.6.1.4.1.8708.2.58.2.2.1.1.4
The operational state of the port device interface.

notPresent - The physical resources are not
available.

down - The interface is de-activated or the are
faults preventing it from going to…
LUM-TCBoardOrInterfaceOperStatus
Type Values:
1notPresent
2down
3up
Description:
The operational state for a board or interface.

notPresent - The board/interface is not available.

down - The board/interface is de-activated or
there are faults preventing it from going to the
'up…
.1.3.6.1.4.1.8708.2.58.2.2.1.1.5
An arbitrary index assigned to each
port device entry aka sdId.
Unsigned32r/w
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.58.2.2.1.1.6
The number of the subrack where the port device is
located.
LUM-TCSubrackNumberr/w
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
.1.3.6.1.4.1.8708.2.58.2.2.1.1.7
The slot where the port device is located.
LUM-TCSlotNumberr/w
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
.1.3.6.1.4.1.8708.2.58.2.2.1.1.8
The index of the local port that this device is connected to.
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.58.2.2.1.1.9
User specified VLAN ID, which is last number in the
port device ID.
If no VLAN ID is specified then VLAN ID 0 is assumed.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.8708.2.58.2.2.1.1.10
Describes which port of Nid is used, Nif, CifA or CifB
LumPortDeviceInterfacer/w
Type Values:
0interfaceNone
1ifNif
2ifCifA
3ifCifB
Description:
Nid Interface Type.
.1.3.6.1.4.1.8708.2.58.2.2.1.1.11
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.58.2.2.1.1.12
The operational state of the laser.

off - The laser is turned off.
on - The laser is turned on.
Enumeration
Enumerated Values:
1off
2on
.1.3.6.1.4.1.8708.2.58.2.2.1.1.13
Measures laser bias current value in tenths of
mA (0.1 mA).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.8708.2.58.2.2.1.1.14
The actual laser temperature in units of
0.1 degrees centigrade.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.8708.2.58.2.2.1.1.15
The transmitted frequency given in hundreds of
GHz (0.01 GHz).
LUM-TCLambdaFrequency
Type Values:
0undefined
1iWdmPonFrequency
2otclg
130b1300
150b1500
850w850
1270w1270
1290w1290
1310w1310
1330w1330
1350w1350
1370w1370
1390w1390
1410w1410
1430w1430
1450w1450
1470w1470
1490w1490
1510w1510
1530w1530
1550w1550
1570w1570
1590w1590
1610w1610
1611w1611
18710ch871
18730ch873
18750ch875
18770ch877
18790ch879
18810ch881
18830ch883
18850ch885
18870ch887
18890ch889
18910ch891
18930ch893
18950ch895
18970ch897
18990ch899
19010ch901
19030ch903
19050ch905
19070ch907
19090ch909
19135ch9135
19140ch914
19145ch9145
19150ch915
19155ch9155
19160ch916
19165ch9165
19170ch917
19175ch9175
19180ch918
19185ch9185
19190ch919
19195ch9195
19200ch920
19205ch9205
19210ch921
19215ch9215
19220ch922
19225ch9225
19230ch923
19235ch9235
19240ch924
19245ch9245
19250ch925
19255ch9255
19260ch926
19265ch9265
19270ch927
19275ch9275
19280ch928
19285ch9285
19290ch929
19295ch9295
19300ch930
19305ch9305
19310ch931
19315ch9315
19320ch932
19325ch9325
19330ch933
19335ch9335
19340ch934
19345ch9345
19350ch935
19355ch9355
19360ch936
19365ch9365
19370ch937
19375ch9375
19380ch938
19385ch9385
19390ch939
19395ch9395
19400ch940
19405ch9405
19410ch941
19415ch9415
19420ch942
19425ch9425
19430ch943
19435ch9435
19440ch944
19445ch9445
19450ch945
19455ch9455
19460ch946
19465ch9465
19470ch947
19475ch9475
19480ch948
19485ch9485
19490ch949
19495ch9495
19500ch950
19505ch9505
19510ch951
19515ch9515
19520ch952
19525ch9525
19530ch953
19535ch9535
19540ch954
19545ch9545
19550ch955
19555ch9555
19560ch956
19565ch9565
19570ch957
19575ch9575
19580ch958
19585ch9585
19590ch959
19595ch9595
19600ch960
19605ch9605
19610ch961
Description:
The frequency of the 'wavelength' given in hundreds
of GHz (0.01 GHz).
.1.3.6.1.4.1.8708.2.58.2.2.1.1.16
The expected frequency given in hundreds of GHz
(0.01 GHz).
LUM-TCLambdaFrequencyr/w
Type Values:
0undefined
1iWdmPonFrequency
2otclg
130b1300
150b1500
850w850
1270w1270
1290w1290
1310w1310
1330w1330
1350w1350
1370w1370
1390w1390
1410w1410
1430w1430
1450w1450
1470w1470
1490w1490
1510w1510
1530w1530
1550w1550
1570w1570
1590w1590
1610w1610
1611w1611
18710ch871
18730ch873
18750ch875
18770ch877
18790ch879
18810ch881
18830ch883
18850ch885
18870ch887
18890ch889
18910ch891
18930ch893
18950ch895
18970ch897
18990ch899
19010ch901
19030ch903
19050ch905
19070ch907
19090ch909
19135ch9135
19140ch914
19145ch9145
19150ch915
19155ch9155
19160ch916
19165ch9165
19170ch917
19175ch9175
19180ch918
19185ch9185
19190ch919
19195ch9195
19200ch920
19205ch9205
19210ch921
19215ch9215
19220ch922
19225ch9225
19230ch923
19235ch9235
19240ch924
19245ch9245
19250ch925
19255ch9255
19260ch926
19265ch9265
19270ch927
19275ch9275
19280ch928
19285ch9285
19290ch929
19295ch9295
19300ch930
19305ch9305
19310ch931
19315ch9315
19320ch932
19325ch9325
19330ch933
19335ch9335
19340ch934
19345ch9345
19350ch935
19355ch9355
19360ch936
19365ch9365
19370ch937
19375ch9375
19380ch938
19385ch9385
19390ch939
19395ch9395
19400ch940
19405ch9405
19410ch941
19415ch9415
19420ch942
19425ch9425
19430ch943
19435ch9435
19440ch944
19445ch9445
19450ch945
19455ch9455
19460ch946
19465ch9465
19470ch947
19475ch9475
19480ch948
19485ch9485
19490ch949
19495ch9495
19500ch950
19505ch9505
19510ch951
19515ch9515
19520ch952
19525ch9525
19530ch953
19535ch9535
19540ch954
19545ch9545
19550ch955
19555ch9555
19560ch956
19565ch9565
19570ch957
19575ch9575
19580ch958
19585ch9585
19590ch959
19595ch9595
19600ch960
19605ch9605
19610ch961
Description:
The frequency of the 'wavelength' given in hundreds
of GHz (0.01 GHz).
.1.3.6.1.4.1.8708.2.58.2.2.1.1.17
The expected signal format.
This value is only used for electrical interfaces.
LumPortDeviceInterfaceSpeedr/w
Type Values:
0fastEthernet
1gbE
Description:
The speed of an interface of an SD.
.1.3.6.1.4.1.8708.2.58.2.2.1.1.18
Defines the media and capability of the TRX.
LUM-TCTrxMediar/w
Type Values:
0undefined
1optical
2tp1000BaseT
3tp100BaseT
4tp10BaseT
5electrical
Description:
Defines the media and capability of the TRX

optical - Optical media

tp1000BaseT - Twisted-pair capable of 1000BaseT

tp100BaseT - Twisted-pair capable of 100BaseT

tp1…
.1.3.6.1.4.1.8708.2.58.2.2.1.1.19
The lowest power that the receiver is guaranteed
to handle, in units of 0.1 dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.8708.2.58.2.2.1.1.20
The received power level in units of 0.1 dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.8708.2.58.2.2.1.1.21
The lower threshold for received power level in
units of 0.1 dB, relative to the receiver
sensitivity.
Integer32r/w
Constraints:
range: -50-100
.1.3.6.1.4.1.8708.2.58.2.2.1.1.22
The transmitted power level in units of 0.1 dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.8708.2.58.2.2.1.1.23
The highest power that the receiver is guaranteed
to handle, in units of 0.1 dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.8708.2.58.2.2.1.1.24
String that describes the transceiver class.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.58.2.2.1.1.25
Loss of signal on a portdevice interface

A(ctivation): Signal is lost.

D(e-activation): Signal is restored.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
.1.3.6.1.4.1.8708.2.58.2.2.1.1.26
transceiver not inserted on a portdevice interface

A(ctivation): An expected transceiver is missing.

D(e-activation): The missing transceiver is inserted.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
.1.3.6.1.4.1.8708.2.58.2.2.1.1.27
Received power level low threshold exceeded.
Applicable for all signal formats.

A(ctivation): The received power level is below the
associated threshold.

D(e-activation): The received power…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
.1.3.6.1.4.1.8708.2.58.2.2.1.1.28
Received power level too high for the transceiver

Applicable for all signal formats.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
.1.3.6.1.4.1.8708.2.58.2.2.1.1.29
.1.3.6.1.4.1.8708.2.58.2.3.1 · 1 row entry · 12 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk portDevIfL2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PORTDEVICEIF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PORTDEVICEIF-MIB::portDevIfL2Table'
A table containing the L2 parameters of all interfaces
of all SDs.
portDevIfL2Entry row .1.3.6.1.4.1.8708.2.58.2.3.1.1
A list of objects containing the L2 parameters of a portdevice interface.
Column Syntax OID
Unique number identifying the portdevice interface within the scope of the
containing interface.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.8708.2.58.2.3.1.1.1
The management name of the nid customer interface, for example
'L2:1:1:1:1:CifA'.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
.1.3.6.1.4.1.8708.2.58.2.3.1.1.2
User configurable label for the port device interface L2 Description .
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.8708.2.58.2.3.1.1.3
An arbitrary index assigned to each
port device entry aka sdId.
Unsigned32r/w
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.8708.2.58.2.3.1.1.4
The number of the subrack where the port device is
located.
LUM-TCSubrackNumberr/w
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
.1.3.6.1.4.1.8708.2.58.2.3.1.1.5
The slot where the port device is located.
LUM-TCSlotNumberr/w
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
.1.3.6.1.4.1.8708.2.58.2.3.1.1.6
The index of the port that this device is connected to.
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.58.2.3.1.1.7
User specified VLAN ID, which is last number in the
port device ID.
If no VLAN ID is specified then VLAN ID 0 is assumed.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.8708.2.58.2.3.1.1.8
Describes which port of Nid is used, Nif, CifA or CifB
LumPortDeviceInterfacer/w
Type Values:
0interfaceNone
1ifNif
2ifCifA
3ifCifB
Description:
Nid Interface Type.
.1.3.6.1.4.1.8708.2.58.2.3.1.1.9
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.8708.2.58.2.3.1.1.10
Indicates whether auto-negotiation is enabled for the portdevice interfaces.
LUM-TCOnOffr/w
Type Values:
1off
2on
2147483646notAvailable
2147483647notApplicable
Description:
The configured laser mode.
notApplicable - used to tell that attribute
is not used in current configuration.
notAvailable - used to tell that it is not
possible to read attribute at the moment.
.1.3.6.1.4.1.8708.2.58.2.3.1.1.11
The current auto-negotiation status of the portdevice interfaces:
halfDuplex
fullDuplex
autoDuplex
incomplete
LumPortDeviceDuplexMode
Type Values:
0halfDuplex
1fullDuplex
2autoDuplex
3incomplete
254duplexNotAvailable
255duplexNotApplicable
Description:
Represents a duplex mode of an interface of an SD.
.1.3.6.1.4.1.8708.2.58.2.3.1.1.12