LUM-PORTDEVICEIF-MIB
The equipment configuration MIB module for port device interface.
Then tables contained in this MIB are:
(1) The Interface groups contains information and configurations for
each port device interface.
- L1 Configuration
- L2 Configuration
- Source file
LUM-PORTDEVICEIF-MIB- Last revised
- Identity
lumPortdeviceIfMIBModule- Base OID
1.3.6.1.4.1.8708.1.1.58
Imported Objects
| IF-MIB | InterfaceIndex |
| LUM-REG | lumModules lumPortdeviceIfMIB |
| LUM-TC | AdminStatus BoardOrInterfaceOperStatus FaultStatus LambdaFrequency MgmtNameString OnOff SlotNumber SubrackNumber TrxMedia |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION (no object page) |
Net-SNMP examples using the infinera MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-PORTDEVICEIF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-PORTDEVICEIF-MIB::lumPortdeviceIfMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PORTDEVICEIF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PORTDEVICEIF-MIB::lumPortdeviceIfMIBModule'
Objects (57)
Showing 57 of 57 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.8708.1.1.58 |
||
.1.3.6.1.4.1.8708.2.58.1 |
||
.1.3.6.1.4.1.8708.2.58.1.1 |
||
.1.3.6.1.4.1.8708.2.58.1.2 |
||
.1.3.6.1.4.1.8708.2.58.2 |
||
.1.3.6.1.4.1.8708.2.58.2.1 |
||
.1.3.6.1.4.1.8708.2.58.2.1.1 |
||
.1.3.6.1.4.1.8708.2.58.2.1.2 |
||
.1.3.6.1.4.1.8708.2.58.2.1.3 |
||
.1.3.6.1.4.1.8708.2.58.2.1.4 |
||
.1.3.6.1.4.1.8708.2.58.2.2 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.58.2.2.1.1.10 |
|
.1.3.6.1.4.1.8708.2.58.2.2.1.1.11 |
||
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.58.2.2.1.1.12 |
|
|
Enumeration
|
.1.3.6.1.4.1.8708.2.58.2.2.1.1.13 |
|
.1.3.6.1.4.1.8708.2.58.2.2.1.1.14 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.15 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.16 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.17 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.18 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.19 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.2 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.20 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.21 |
||
|
Integer32
|
.1.3.6.1.4.1.8708.2.58.2.2.1.1.22 |
|
.1.3.6.1.4.1.8708.2.58.2.2.1.1.23 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.24 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.25 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.26 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.27 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.28 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.29 |
||
|
|
.1.3.6.1.4.1.8708.2.58.2.2.1.1.3 |
|
.1.3.6.1.4.1.8708.2.58.2.2.1.1.4 |
||
.1.3.6.1.4.1.8708.2.58.2.2.1.1.5 |
||
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.58.2.2.1.1.6 |
|
.1.3.6.1.4.1.8708.2.58.2.2.1.1.7 |
||
|
|
.1.3.6.1.4.1.8708.2.58.2.2.1.1.8 |
|
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.58.2.2.1.1.9 |
|
.1.3.6.1.4.1.8708.2.58.2.3 |
||
.1.3.6.1.4.1.8708.2.58.2.3.1 |
||
.1.3.6.1.4.1.8708.2.58.2.3.1.1 |
||
|
|
.1.3.6.1.4.1.8708.2.58.2.3.1.1.1 |
|
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.58.2.3.1.1.10 |
|
.1.3.6.1.4.1.8708.2.58.2.3.1.1.11 |
||
.1.3.6.1.4.1.8708.2.58.2.3.1.1.12 |
||
.1.3.6.1.4.1.8708.2.58.2.3.1.1.2 |
||
|
|
.1.3.6.1.4.1.8708.2.58.2.3.1.1.3 |
|
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.58.2.3.1.1.4 |
|
.1.3.6.1.4.1.8708.2.58.2.3.1.1.5 |
||
|
|
.1.3.6.1.4.1.8708.2.58.2.3.1.1.6 |
|
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.58.2.3.1.1.7 |
|
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.58.2.3.1.1.8 |
|
.1.3.6.1.4.1.8708.2.58.2.3.1.1.9 |
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- LUM-REGinfinera
- LUM-TCinfinera
- LUM-PORTDEVICEIF-MIBinfineraselected
Type Definitions (6)
| Enumeration |
halfDuplex(0)fullDuplex(1)autoDuplex(2)incomplete(3)duplexNotAvailable(254)duplexNotApplicable(255)Represents a duplex mode of an interface of an SD.
|
|
| Enumeration |
interfaceNone(0)ifNif(1)ifCifA(2)ifCifB(3)Nid Interface Type.
|
|
| Enumeration |
fastEthernet(0)gbE(1)The speed of an interface of an SD.
|
|
| Enumeration |
msMaster(0)msSlave(1)msAuto(2)msNotAvailable(254)msNotApplicable(255)Represents a master-slave role of an interface of an SD.
|
|
| Enumeration |
mdi(0)mdix(1)mdiNotAvailable(254)mdiNotApplicable(255)Represents the MDI/MDIX mode of an SD.
|
|
| Enumeration |
pauseDisabled(0)pauseEnabled(1)pauseTxEnabledRxDisabled(2)pauseTxDisabledRxEnabled(3)pauseAuto(4)pauseNotAvailable(254)pauseNotApplicable(255)Represents a pause mode of an interface of an SD.
|
Conformance Groups (3)
Compliance Statements (1)
OID
.1.3.6.1.4.1.8708.2.58.1.2.1Basic implementation requirements for the port device interface MIB. (R21.0).
Required groups
| mandatory | portDevIfGeneralGroupV1 | |
| mandatory | portDevIfL1GroupV1 | |
| mandatory | portDevIfL2GroupV1 |