LUM-MPLSOAM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
38

mplsOamBfdSessTable

table
.1.3.6.1.4.1.8708.2.44.2.2.1 · 1 row entry · 29 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk mplsOamBfdSessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MPLSOAM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MPLSOAM-MIB::mplsOamBfdSessTable' 
The BFD Session Table describes the BFD sessions.
mplsOamBfdSessEntry row .1.3.6.1.4.1.8708.2.44.2.2.1.1
The BFD Session Entry describes a single BFD session.
Indexes
Column Syntax OID
mplsOamBfdSessIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.1
mplsOamBfdSessInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.2
mplsOamBfdSessName
The management name of the BFD session, for example
'bfdSess:1:2:myIdentifier', where the first number indicates
subrack and the second slot number. For LSPs 'myIdentifier'
is set to the LSP identifier.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.3
mplsOamBfdSessAdminStatus
A transition from 'down' to 'up' will start
the BFD state machine for the session. The state
machine will have an initial state of down.
A transition from 'up' to 'down' will cause
the BFD session to be brought down to
…
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.4
mplsOamBfdSessState
BFD session state.
none - Locally indicated state of the remote
BFD session before connection is made.

adminDown - State the BFD session is in when
the requested BFD administr…
BfdSessStateTC
Type Values:
0none
1adminDown
2down
3init
4up
5failing
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.5
mplsOamBfdSessRemoteState
BFD session state.
none - Locally indicated state of the remote
BFD session before connection is made.

adminDown - State the BFD session is in when
the requested BFD administr…
BfdSessStateTC
Type Values:
0none
1adminDown
2down
3init
4up
5failing
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.6
mplsOamBfdSessDiag
A diagnostic code specifying the local systems reason
for the last transition of the session from up
to some other state.

noDiagnostic
- Normal state of session when no fault detected.

cont…
BfdDiagTC
Type Values:
0noDiagnostic
1controlDetectionTimeExpired
2echoFunctionFailed
3neighborSignaledSessionDown
4forwardingPlaneReset
5pathDown
6concatenatedPathDown
7administrativelyDown
8reverseConcatenatedPathDown
9misconnectionDefect
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.7
mplsOamBfdSessRemoteDiag
A diagnostic code specifying the remote systems reason
for the last transition of the session from up
to some other state.

noDiagnostic
- Normal state of session when no fault detected.

con…
BfdDiagTC
Type Values:
0noDiagnostic
1controlDetectionTimeExpired
2echoFunctionFailed
3neighborSignaledSessionDown
4forwardingPlaneReset
5pathDown
6concatenatedPathDown
7administrativelyDown
8reverseConcatenatedPathDown
9misconnectionDefect
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.8
mplsOamBfdSessNegotiatedTxInterval
This object specifies the negotiated interval
that the local system is transmitting
BFD Control packets. Display unit is milliseconds
but the storage type is microseconds.
BfdIntervalTC
Type Constraints:
range: 0..1000000
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.9
mplsOamBfdSessNegotiatedRxInterval
This object specifies the negotiated interval
that the local system is receiving
BFD Control packets. Display unit is milliseconds
but the storage type is microseconds.
BfdIntervalTC
Type Constraints:
range: 0..1000000
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.10
mplsOamBfdSessMonitoringPath
Name of the path the BFD object is monitoring.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.11
mplsOamBfdSessMonitoringPathType
This object indicates the type of path being monitored by this
BFD session entry, LSP, PW, or MEP.
Enumerationr/w
Enumerated Values:
0notSelected
1lsp
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.12
mplsOamBfdSessMonitoringPathIndex
Index of the path of the BFD object is monitoring.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.13
mplsOamBfdSessTemplate
ID of the associated LSP that is active, if exists.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.14
mplsOamBfdSessTemplateIndex
The index of the associated LSP that is active,
if exists.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.15
mplsOamBfdSessSourceMepId
Actual configuration of source MEP ID for current
BFD session received from traffic unit. The identifier of
the tunnel and LSP.

'[Global ID]:[Node ID]:[Tunnel Id]:[LSP ID]'
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.16
mplsOamBfdSessTargetMepId
Actual configuration of target MEP ID for current
BFD session received from traffic unit. The identifier of
the tunnel and LSP.

'[Global ID]:[Node ID]:[Tunnel Id]:[LSP ID]'
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.17
mplsOamBfdSessRcvTargetMepId
Actual configuration of target MEP ID for current
BFD session received from traffic unit of corresponding BFD
session via CV packages.The identifier of
the tunnel and LSP.

'[Global ID]:[Node ID]:[Tunnel I…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.18
mplsOamBfdSessMepNotConfigured
MEP-ID for tunnel, node or LSP are set to zero, source or remote.
The CV messages will be transmitted but the connectivity verification
will have degraded function.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.19
mplsOamBfdSessLocalNotConnected
No packages received from remote BFD session.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.20
mplsOamBfdSessLocalMisConnectivity
Invalid MEP-ID-TLV received by local session.
MPLS-TP MEP-ID-TLV does from CV messages does
not match local configuration. BFD session is
connected to wrong peer BFD session or MEP IDs
are not configured correctly. BFD …
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.21
mplsOamBfdSessLocalTimerExpired
Local BFD session has not received valid CC
packages for an interval of more than detection
multiplier times the negotiated RX interval.
Check for layer 1 problems
Check port settings
Check MPLS-TP network set-up for mi…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.22
mplsOamBfdSessRemoteMisConnectivity
The local BFD session has received an indication that the
peer BFD session is in down state due to an invalid
received MPLS-TP MEP-ID-TLV.
Check local source and peer remote MEP-ID-TLV configuration.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.23
mplsOamBfdSessRemoteTimerExpired
Remote time-out for CC packages.
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.24
mplsOamBfdSessRemoteAdminDown
The local BFD session has received an indication
that the peer BFD session is in administrative down
state.
Check peer BFD session
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.25
mplsOamBfdSessRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.26
mplsOamBfdSessDesiredMinTxInterval
This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and should not be used. Display unit
is milli…
BfdIntervalTC
Type Constraints:
range: 0..1000000
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.27
mplsOamBfdSessReqMinRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) is not supported. Display unit is milliseconds
but the s…
BfdIntervalTC
Type Constraints:
range: 0..1000000
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.28
mplsOamBfdSessTrafficClass
The entry signifies the Traffic Class used on the
traffic generated by the BFD session CV and CC messages.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.8708.2.44.2.2.1.1.29

mplsOamBfdTemplateTable

table
.1.3.6.1.4.1.8708.2.44.2.3.2 · 1 row entry · 9 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk mplsOamBfdTemplateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MPLSOAM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MPLSOAM-MIB::mplsOamBfdTemplateTable' 
The BFD template table describes the common templates for BFD sessions.
mplsOamBfdTemplateEntry row .1.3.6.1.4.1.8708.2.44.2.3.2.1
The BFD template entry describes the common templates for BFD sessions.
Indexes
Column Syntax OID
mplsOamBfdTemplateIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.44.2.3.2.1.1
mplsOamBfdTemplateInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.44.2.3.2.1.2
mplsOamBfdTemplateName
The management name of the BFD session, for example
'bfdSess:1:2:myIdentifier', where the first number indicates
subrack and the second slot number.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.44.2.3.2.1.3
mplsOamBfdTemplateIdentifier
A unique identifier for template object.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.44.2.3.2.1.4
mplsOamBfdTemplateDesiredMinTxInterval
This object specifies the minimum interval, in
microseconds, that the local system would like to use
when transmitting BFD Control packets. The value of
zero(0) is reserved, and should not be used. Display unit
is milli…
BfdIntervalTCr/w
Type Constraints:
range: 0..1000000
 .1.3.6.1.4.1.8708.2.44.2.3.2.1.5
mplsOamBfdTemplateDetectMult
This object specifies the 'detect time' multiplier for
raising an alarm. Number of loss BFD CC packets.
This parameter is not configurable.
BfdMultiplierTCr/w
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.8708.2.44.2.3.2.1.6
mplsOamBfdTemplateReqMinRxInterval
This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting. The value of
zero(0) is not supported. Display unit is milliseconds
but the s…
BfdIntervalTCr/w
Type Constraints:
range: 0..1000000
 .1.3.6.1.4.1.8708.2.44.2.3.2.1.7
mplsOamBfdTemplateCreateNewTemplate
Internal command for creating a new BFD template.

Identifier - The unique identifier for the template.

Tx Interval - Minimum interval for sending BFD control packets.
Configur…
LUM-TCCommandString
Description:
tbd
 .1.3.6.1.4.1.8708.2.44.2.3.2.1.8
mplsOamBfdTemplateRowStatus
This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified except the
mplsOamBfdTemplateRowStatus and mp…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.8708.2.44.2.3.2.1.9