LUM-MPLSOAM-MIB
MPLS OAM Management Information Base
The tables contained in this MIB are:
(1) Bidirectional forwarding table.
BFD is a protocol intended to detect faults in the bidirectional path
between two forwarding engines. It operates independently of media,
data protocols, and routing protocols.
(2) Template for bidirectional forwarding.
Templates used for setting up a BFD sessions.
- Source file
LUM-MPLSOAM-MIB- Last revised
- Identity
lumMplsOamMIBModule- Base OID
1.3.6.1.4.1.8708.1.1.44
Imported Objects
| LUM-REG | lumModules lumMplsOamMIB |
| LUM-TC | CommandString FaultStatus MgmtNameString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION (no object page) |
Net-SNMP examples using the infinera MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-MPLSOAM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-MPLSOAM-MIB::lumMplsOamMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-MPLSOAM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-MPLSOAM-MIB::lumMplsOamMIBModule'
Objects (54)
Showing 54 of 54 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.8708.1.1.44 |
||
.1.3.6.1.4.1.8708.2.44.1 |
||
.1.3.6.1.4.1.8708.2.44.1.1 |
||
.1.3.6.1.4.1.8708.2.44.1.2 |
||
.1.3.6.1.4.1.8708.2.44.2 |
||
.1.3.6.1.4.1.8708.2.44.2.1 |
||
.1.3.6.1.4.1.8708.2.44.2.1.1 |
||
.1.3.6.1.4.1.8708.2.44.2.1.2 |
||
.1.3.6.1.4.1.8708.2.44.2.1.3 |
||
.1.3.6.1.4.1.8708.2.44.2.1.4 |
||
.1.3.6.1.4.1.8708.2.44.2.2 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.1 |
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.10 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.11 |
||
|
Enumeration
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.12 |
|
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.13 |
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.14 |
||
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.15 |
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.16 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.17 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.18 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.19 |
||
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.2 |
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.20 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.21 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.22 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.23 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.24 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.25 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.26 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.27 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.28 |
||
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.29 |
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.3 |
||
|
Enumeration
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.4 |
|
.1.3.6.1.4.1.8708.2.44.2.2.1.1.5 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.6 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.7 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.8 |
||
.1.3.6.1.4.1.8708.2.44.2.2.1.1.9 |
||
.1.3.6.1.4.1.8708.2.44.2.3 |
||
.1.3.6.1.4.1.8708.2.44.2.3.2 |
||
.1.3.6.1.4.1.8708.2.44.2.3.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.44.2.3.2.1.1 |
|
|
Unsigned32
|
.1.3.6.1.4.1.8708.2.44.2.3.2.1.2 |
|
.1.3.6.1.4.1.8708.2.44.2.3.2.1.3 |
||
.1.3.6.1.4.1.8708.2.44.2.3.2.1.4 |
||
.1.3.6.1.4.1.8708.2.44.2.3.2.1.5 |
||
.1.3.6.1.4.1.8708.2.44.2.3.2.1.6 |
||
.1.3.6.1.4.1.8708.2.44.2.3.2.1.7 |
||
.1.3.6.1.4.1.8708.2.44.2.3.2.1.8 |
||
.1.3.6.1.4.1.8708.2.44.2.3.2.1.9 |
Dependencies (5) 5 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- LUM-REGinfinera
- SNMPv2-TCrfc
- LUM-TCinfinera
- SNMPv2-CONFrfc
- LUM-MPLSOAM-MIBinfineraselected
Type Definitions (4)
| Enumeration |
noDiagnostic(0)controlDetectionTimeExpired(1)echoFunctionFailed(2)neighborSignaledSessionDown(3)forwardingPlaneReset(4)pathDown(5)concatenatedPathDown(6)administrativelyDown(7)reverseConcatenatedPathDown(8)misconnectionDefect(9) |
|
| Unsigned32 |
range: 0..1000000 |
|
| Unsigned32 |
range: 1..255 |
|
| Enumeration |
none(0)adminDown(1)down(2)init(3)up(4)failing(5) |
Conformance Groups (4)
Compliance Statements (2)
OID
.1.3.6.1.4.1.8708.2.44.1.2.1Basic implementation requirements for the MPLS OAM MIB. (R19)
Required groups
| mandatory | mplsIOamGeneralGroupV1 | |
| mandatory | mplsBfdSessGroupV1 | |
| mandatory | mplsBfdTemplateGroupV1 |
OID
.1.3.6.1.4.1.8708.2.44.1.2.2Basic implementation requirements for the MPLS OAM MIB. (R20)
Required groups
| mandatory | mplsIOamGeneralGroupV1 | |
| mandatory | mplsBfdSessGroupV2 | |
| mandatory | mplsBfdTemplateGroupV1 |