LUM-IFXR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
31

ifXrDscgTable

table
.1.3.6.1.4.1.8708.2.85.2.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifXrDscgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFXR-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFXR-MIB::ifXrDscgTable' 
The dscg group contains information and configuration
for the dscg layer objects.
ifXrDscgEntry row .1.3.6.1.4.1.8708.2.85.2.2.1.1
An entry in the ifXr list.
Indexes
Column Syntax OID
ifXrDscgIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.85.2.2.1.1.1
ifXrDscgName
The management name of the object, e.g. 'dscg:1:2:9-10:1',
where the first number indicates subrack, the second slot
number, the third/fourth are the physical port numbers,
and the last one is sub-carrier group number.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.85.2.2.1.1.2
ifXrDscgConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.85.2.2.1.1.3
ifXrDscgUpPortId
Internal port reference for traffic unit.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.85.2.2.1.1.4
ifXrDscgSubCarrierGroupId
Sub carriet group id.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.85.2.2.1.1.5
ifXrDscgTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.85.2.2.1.1.6
ifXrDscgRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.85.2.2.1.1.7
ifXrDscgOpticalLossOfSignal
Optical loss of signal (OLOS).

The received signal has disappeared.

alarm - Loss of signal is active

ok - Loss of signal is not active
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.85.2.2.1.1.8
ifXrDscgLossOfFrame
Loss of frame (LOF).

alarm: A XR frame cannot be located.

ok: A XR frame can be located.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.85.2.2.1.1.9
ifXrDscgBackwardDefectIndication
Indicates if backward defect indication (BDI) alarm
exists or not.

alarm: BDI is active.

ok: BDI is inactive.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.85.2.2.1.1.10

ifXrOduCniTable

table
.1.3.6.1.4.1.8708.2.85.2.3.1 · 1 row entry · 9 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifXrOduCniTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFXR-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFXR-MIB::ifXrOduCniTable' 
The table contains information
and configuration for the oducni layer objects.
ifXrOduCniEntry row .1.3.6.1.4.1.8708.2.85.2.3.1.1
An entry in the ifXr odu list.
Indexes
Column Syntax OID
ifXrOduCniIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.85.2.3.1.1.1
ifXrOduCniName
The management name of the object, e.g. 'odu4i:1:2:9-10:1',
where the first number indicates subrack, the second slot
number, the third/fourth are the physical port numbers, and
the last one is sub-carrier group number.
LUM-TCMgmtNameStringr/w
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.85.2.3.1.1.2
ifXrOduCniConnIfBasicIfIndex
An index that describes to which index in the ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNAr/w
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.85.2.3.1.1.3
ifXrOduCniTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.85.2.3.1.1.4
ifXrOduCniRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.85.2.3.1.1.5
ifXrOduCniLossOfFrameMultiframe
Loss of frame/multiframe (LOFLOM).

Indicates loss of multiframe.

alarm: Loss of frame / multiframe is active.

ok: Loss of frame / multiframe inactive.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.85.2.3.1.1.6
ifXrOduCniBackwardDefectIndication
Indicates if backward defect indication (BDI) alarm
exists or not.

alarm: BDI is active.

ok: BDI is inactive.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.85.2.3.1.1.7
ifXrOduCniRxClientSignalFailure
Rx Client signal fail (CSF).

Indicates if the incoming signal in remote end is failed or not.

alarm: Remote end client is faulty.

ok: Remote end client is OK.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.85.2.3.1.1.8
ifXrOduCniMultiplexStructureIdentifierMismatch
Rx Multiplex structure identifier mismatch (MSIM).

Indicates received MSI is not equal to expected MSI.

alarm: Raised upon detection of LO-ODU type or TPN
mismatch (e.g. ODU4i-100GE …
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.85.2.3.1.1.9

ifXrOtuCniTable

table
.1.3.6.1.4.1.8708.2.85.2.4.1 · 1 row entry · 12 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifXrOtuCniTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFXR-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFXR-MIB::ifXrOtuCniTable' 
The table contains information and
configuration for the otucni layer objects.
ifXrOtuCniEntry row .1.3.6.1.4.1.8708.2.85.2.4.1.1
An entry in the ifXr otucni list.
Indexes
Column Syntax OID
ifXrOtuCniIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.85.2.4.1.1.1
ifXrOtuCniName
The management name of the object, e.g. 'otu4i:1:2:9-10:1',
where the first number indicates subrack, the second slot
number, the third/fourth are the physical port numbers,
and the last one is sub-carrier group number.
LUM-TCMgmtNameStringr/w
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.85.2.4.1.1.2
ifXrOtuCniConnIfBasicIfIndex
An index that describes to which index in the ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNAr/w
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.85.2.4.1.1.3
ifXrOtuCniTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.85.2.4.1.1.4
ifXrOtuCniRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.85.2.4.1.1.5
ifXrOtuCniTraceTransmitted
The trace identifier to be transmitted from this interface.
LUM-TCDisplayStringWithNAr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.85.2.4.1.1.6
ifXrOtuCniTraceReceived
The received trace identifier for this interface.
LUM-TCDisplayStringWithNA
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.85.2.4.1.1.7
ifXrOtuCniTraceExpected
The trace identifier used for matching against
the received trace identifier.
LUM-TCDisplayStringWithNAr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.85.2.4.1.1.8
ifXrOtuCniTraceIdentifierMismatch
Trace identifier mismatch (TIM).

Indicates that the received trace identifier
differs from the expected trace identifier.

alarm: The received trace identifier is different from
the e…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.85.2.4.1.1.9
ifXrOtuCniLossOfFrameMultiFrame
Loss of frame/multiframe (LOFLOM).

alarm: Loss of frame/multiframe is active.

ok: Loss of frame/multiframe is inactive.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.85.2.4.1.1.10
ifXrOtuCniBackwardDefectIndication
Indicates if backward defect indication (BDI) alarm
exists or not.

alarm: BDI is active.

ok: BDI is inactive.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.85.2.4.1.1.11
ifXrOtuCniAlarmIndicationSignal
Alarm indication signal (AIS).

Indicates if AIS alarm exists or not
in receiving direction.

alarm: An AIS in received signal is detected.

ok: AIS is inactive.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.85.2.4.1.1.12