LUM-IFXR-MIB
The MIB module for management of XR parameters on objects.
This module describes the XR layer in openXR.
The tables contained in this MIB are:
(1) The General group contains some general attributes as time stamps
and tables sizes.
(2) The DSCG group contains information and configuration for the dscg
layer objects.
(3) The ODUCni group contains information and configuration for the oducni.
(4) The OTUCni group contains information and configuration for the otucni layer.
- Source file
LUM-IFXR-MIB- Last revised
- Identity
lumIfXrMIBModule- Base OID
1.3.6.1.4.1.8708.1.1.85
Imported Objects
| LUM-REG | lumIfXrMIB lumModules |
| LUM-TC | DisplayStringWithNA FaultStatusWithNA MgmtNameString SignalStatusWithNA Unsigned32WithNA |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString |
Net-SNMP examples using the infinera MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-IFXR-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-IFXR-MIB::lumIfXrMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFXR-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFXR-MIB::lumIfXrMIBModule'
Objects (57)
Showing 57 of 57 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.8708.1.1.85 |
||
.1.3.6.1.4.1.8708.2.85.1 |
||
.1.3.6.1.4.1.8708.2.85.1.1 |
||
.1.3.6.1.4.1.8708.2.85.1.2 |
||
.1.3.6.1.4.1.8708.2.85.2 |
||
.1.3.6.1.4.1.8708.2.85.2.1 |
||
.1.3.6.1.4.1.8708.2.85.2.1.1 |
||
.1.3.6.1.4.1.8708.2.85.2.1.10 |
||
.1.3.6.1.4.1.8708.2.85.2.1.11 |
||
.1.3.6.1.4.1.8708.2.85.2.1.2 |
||
.1.3.6.1.4.1.8708.2.85.2.1.3 |
||
.1.3.6.1.4.1.8708.2.85.2.1.4 |
||
.1.3.6.1.4.1.8708.2.85.2.1.5 |
||
.1.3.6.1.4.1.8708.2.85.2.1.6 |
||
.1.3.6.1.4.1.8708.2.85.2.1.7 |
||
.1.3.6.1.4.1.8708.2.85.2.1.8 |
||
.1.3.6.1.4.1.8708.2.85.2.1.9 |
||
.1.3.6.1.4.1.8708.2.85.2.2 |
||
.1.3.6.1.4.1.8708.2.85.2.2.1 |
||
.1.3.6.1.4.1.8708.2.85.2.2.1.1 |
||
.1.3.6.1.4.1.8708.2.85.2.2.1.1.1 |
||
.1.3.6.1.4.1.8708.2.85.2.2.1.1.10 |
||
.1.3.6.1.4.1.8708.2.85.2.2.1.1.2 |
||
.1.3.6.1.4.1.8708.2.85.2.2.1.1.3 |
||
|
Integer32
|
.1.3.6.1.4.1.8708.2.85.2.2.1.1.4 |
|
.1.3.6.1.4.1.8708.2.85.2.2.1.1.5 |
||
.1.3.6.1.4.1.8708.2.85.2.2.1.1.6 |
||
.1.3.6.1.4.1.8708.2.85.2.2.1.1.7 |
||
.1.3.6.1.4.1.8708.2.85.2.2.1.1.8 |
||
.1.3.6.1.4.1.8708.2.85.2.2.1.1.9 |
||
.1.3.6.1.4.1.8708.2.85.2.3 |
||
.1.3.6.1.4.1.8708.2.85.2.3.1 |
||
.1.3.6.1.4.1.8708.2.85.2.3.1.1 |
||
.1.3.6.1.4.1.8708.2.85.2.3.1.1.1 |
||
|
|
.1.3.6.1.4.1.8708.2.85.2.3.1.1.2 |
|
.1.3.6.1.4.1.8708.2.85.2.3.1.1.3 |
||
.1.3.6.1.4.1.8708.2.85.2.3.1.1.4 |
||
.1.3.6.1.4.1.8708.2.85.2.3.1.1.5 |
||
.1.3.6.1.4.1.8708.2.85.2.3.1.1.6 |
||
.1.3.6.1.4.1.8708.2.85.2.3.1.1.7 |
||
.1.3.6.1.4.1.8708.2.85.2.3.1.1.8 |
||
.1.3.6.1.4.1.8708.2.85.2.3.1.1.9 |
||
.1.3.6.1.4.1.8708.2.85.2.4 |
||
.1.3.6.1.4.1.8708.2.85.2.4.1 |
||
.1.3.6.1.4.1.8708.2.85.2.4.1.1 |
||
.1.3.6.1.4.1.8708.2.85.2.4.1.1.1 |
||
.1.3.6.1.4.1.8708.2.85.2.4.1.1.10 |
||
.1.3.6.1.4.1.8708.2.85.2.4.1.1.11 |
||
.1.3.6.1.4.1.8708.2.85.2.4.1.1.12 |
||
|
|
.1.3.6.1.4.1.8708.2.85.2.4.1.1.2 |
|
.1.3.6.1.4.1.8708.2.85.2.4.1.1.3 |
||
.1.3.6.1.4.1.8708.2.85.2.4.1.1.4 |
||
.1.3.6.1.4.1.8708.2.85.2.4.1.1.5 |
||
.1.3.6.1.4.1.8708.2.85.2.4.1.1.6 |
||
.1.3.6.1.4.1.8708.2.85.2.4.1.1.7 |
||
.1.3.6.1.4.1.8708.2.85.2.4.1.1.8 |
||
.1.3.6.1.4.1.8708.2.85.2.4.1.1.9 |
Dependencies (5) 5 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- LUM-REGinfinera
- SNMPv2-TCrfc
- LUM-TCinfinera
- SNMPv2-CONFrfc
- LUM-IFXR-MIBinfineraselected
Conformance Groups (4)
Compliance Statements (1)
OID
.1.3.6.1.4.1.8708.2.85.1.2.1Basic implementation requirements for the XR MIB. (R38.0)
Required groups
| mandatory | ifXrGeneralGroupV1 | |
| mandatory | ifXrDscgGroupV1 | |
| mandatory | ifXrOduCniGroupV1 | |
| mandatory | ifXrOtuCniGroupV1 |