LUM-IFSDH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
22

ifSdhRsTable

table
.1.3.6.1.4.1.8708.2.52.2.2.1 · 1 row entry · 13 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifSdhRsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFSDH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFSDH-MIB::ifSdhRsTable' 
The regenerator (rs) group contains information and
configuration for the regenerator section (rs).
ifSdhRsEntry row .1.3.6.1.4.1.8708.2.52.2.2.1.1
An entry in the ifSdh rs list.
Indexes
Column Syntax OID
ifSdhRsIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.1
ifSdhRsName
The management name of the optical transmission section,
for example 'rs:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.2
ifSdhRsConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.3
ifSdhRsOhTransparencyBitmask
The OH transparency bitmask.
Bits:
B1 = 0x01
E1 = 0x02
F1 = 0x04
D1-D3 = 0x08
J0 = 0x10
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.4
ifSdhRsTraceTransmitted
The trace to be transmitted from this interface.

Default value: <IP address>:<subrack>:<slot>:<port>
Note that only the last part of the address is used.

The trace _notApplicable_ is u…
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.5
ifSdhRsTraceReceived
The received trace for this interface.

The trace _notApplicable_ is used to tell SNMP clients that
attribute is not used in current configuration.

The trace _notAvailable_ is used to tell S…
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.6
ifSdhRsTraceExpected
Trace used for matching against the received trace.

The trace _notApplicable_ is used to tell SNMP clients that
attribute is not used in current configuration.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.7
ifSdhRsTraceAlarmMode
Controls if the trace identifier mismatch alarm
should be raised if received trace and expected trace
differs.

disabled - The alarm is disabled.

enabled - The alarm is raised if expected tr…
LUM-TCEnabledDisabledWithNA
Type Values:
1disabled
2enabled
2147483647notApplicable
Description:
disabled - Attribute is not set.

enabled - Attribute is set.

notApplicable (2147483647) is used when attribute is
not used in current configuration.
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.8
ifSdhRsTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.9
ifSdhRsRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.10
ifSdhRsTraceMismatch
Trace identifier mismatch (TIM).

Indicates if the expected trace identifier differs from the
received trace identifier.

Reference: J0: G.707/9.2.2.2, TIM: G.806/2.2.2

alarm: …
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.11
ifSdhRsLossOfFrame
Rx RS-Loss of frame (LOF).

Reference: G.707/9.2.2.1, G.783/2.5.1, G.783/9.3.1.2

alarm: An RSOH frame cannot be located.

ok: An RSOH frame can be located.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.12
ifSdhRsTxLossOfFrame
Tx RS-Loss of frame (LOF).

Reference: G.707/9.2.2.1, G.783/2.5.1, G.783/9.3.1.2

alarm: An RSOH frame cannot be located.

ok: An RSOH frame can be located.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.52.2.2.1.1.13

ifSdhMsTable

table
.1.3.6.1.4.1.8708.2.52.2.3.1 · 1 row entry · 9 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifSdhMsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFSDH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFSDH-MIB::ifSdhMsTable' 
The multiplexing (ms) group contains information and
configuration for the multiplexing section (ms).
ifSdhMsEntry row .1.3.6.1.4.1.8708.2.52.2.3.1.1
An entry in the ifSdh ms list.
Indexes
Column Syntax OID
ifSdhMsIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.1
ifSdhMsName
The management name of the optical transmission section,
for example 'ms:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.2
ifSdhMsConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.3
ifSdhMsOhTransparencyBitmask
The OH transparency bitmask.
Bits:
B2 = 0x01
E2 = 0x02
D4-D12 = 0x04
K1-K2 = 0x08
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.4
ifSdhMsTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.5
ifSdhMsRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.6
ifSdhMsRxAlarmIndicationSignal
Rx MS-Alarm indication signal (AIS).

Reference: G.806/6.2.6.2, G.806/6.3.1, G.806/Appendix III

alarm: An MS AIS signal is detected.

ok: The MS AIS is cleared.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.7
ifSdhMsRemoteDefectIndication
Rx MS-Remote defect indication (RDI).

Reference: G1: G.707/9.3.1.4, G.806/6.2.6.3, G.806/6.3.2

alarm: RDI indication (in frame) active.

ok: RDI indication inactive.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.8
ifSdhMsTxAlarmIndicationSignal
Tx MS-Alarm indication signal (AIS).

Reference: G.806/6.2.6.2, G.806/6.3.1, G.806/Appendix III

alarm: An MS AIS signal is detected.

ok: The MS AIS is cleared.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.52.2.3.1.1.9