LUM-IFSDH-MIB

        The MIB module for management of sdh parameters on port objects.
        
        
This module describes the regenerator and multiplexing sections
in ITU G.707 Recommendation.
        
References are referring to G.707 (12/2003), G.783 (03/206)
        
The tables contained in this MIB are:
        
(1) The General group contains some general attributes as time stamps
    and tables sizes.
        
(2) The regenerator (rs) group contains information and
    configuration for the regenerator section overhead.
        
(3) The multiplexing (ms) group contains information and
	    configuration for the multiplexing overhead.
    
Source file
LUM-IFSDH-MIB
Last revised
Identity
lumIfSdhMIBModule
Base OID
1.3.6.1.4.1.8708.1.1.52
Imported Objects
LUM-REG lumIfSdhMIB lumModules
LUM-TC DisplayStringWithNA EnabledDisabledWithNA FaultStatusWithNA MgmtNameString SignalStatusWithNA Unsigned32WithNA
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DateAndTime
Net-SNMP examples using the infinera MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-IFSDH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-IFSDH-MIB::lumIfSdhMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFSDH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFSDH-MIB::lumIfSdhMIBModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (44)
.1.3.6.1.4.1.8708.1.1.52
.1.3.6.1.4.1.8708.2.52.1
.1.3.6.1.4.1.8708.2.52.1.1
.1.3.6.1.4.1.8708.2.52.1.2
.1.3.6.1.4.1.8708.2.52.2
.1.3.6.1.4.1.8708.2.52.2.1
.1.3.6.1.4.1.8708.2.52.2.1.1
.1.3.6.1.4.1.8708.2.52.2.1.2
.1.3.6.1.4.1.8708.2.52.2.1.3
.1.3.6.1.4.1.8708.2.52.2.1.4
.1.3.6.1.4.1.8708.2.52.2.1.5
.1.3.6.1.4.1.8708.2.52.2.1.6
.1.3.6.1.4.1.8708.2.52.2.1.7
.1.3.6.1.4.1.8708.2.52.2.1.8
.1.3.6.1.4.1.8708.2.52.2.2
.1.3.6.1.4.1.8708.2.52.2.2.1
.1.3.6.1.4.1.8708.2.52.2.2.1.1
.1.3.6.1.4.1.8708.2.52.2.2.1.1.1
.1.3.6.1.4.1.8708.2.52.2.2.1.1.10
.1.3.6.1.4.1.8708.2.52.2.2.1.1.11
.1.3.6.1.4.1.8708.2.52.2.2.1.1.12
.1.3.6.1.4.1.8708.2.52.2.2.1.1.13
.1.3.6.1.4.1.8708.2.52.2.2.1.1.2
.1.3.6.1.4.1.8708.2.52.2.2.1.1.3
.1.3.6.1.4.1.8708.2.52.2.2.1.1.4
OctetString
.1.3.6.1.4.1.8708.2.52.2.2.1.1.5
OctetString
.1.3.6.1.4.1.8708.2.52.2.2.1.1.6
OctetString
.1.3.6.1.4.1.8708.2.52.2.2.1.1.7
.1.3.6.1.4.1.8708.2.52.2.2.1.1.8
.1.3.6.1.4.1.8708.2.52.2.2.1.1.9
.1.3.6.1.4.1.8708.2.52.2.3
.1.3.6.1.4.1.8708.2.52.2.3.1
.1.3.6.1.4.1.8708.2.52.2.3.1.1
.1.3.6.1.4.1.8708.2.52.2.3.1.1.1
.1.3.6.1.4.1.8708.2.52.2.3.1.1.2
.1.3.6.1.4.1.8708.2.52.2.3.1.1.3
.1.3.6.1.4.1.8708.2.52.2.3.1.1.4
.1.3.6.1.4.1.8708.2.52.2.3.1.1.5
.1.3.6.1.4.1.8708.2.52.2.3.1.1.6
.1.3.6.1.4.1.8708.2.52.2.3.1.1.7
.1.3.6.1.4.1.8708.2.52.2.3.1.1.8
.1.3.6.1.4.1.8708.2.52.2.3.1.1.9
.1.3.6.1.4.1.8708.2.52.2.4
.1.3.6.1.4.1.8708.2.52.2.5
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. LUM-REGinfinera
  3. SNMPv2-TCrfc
  4. LUM-TCinfinera
  5. SNMPv2-CONFrfc
  6. LUM-IFSDH-MIBinfineraselected
Conformance Groups (5)
The general objects.
.1.3.6.1.4.1.8708.2.52.1.1.1
ifSdhRsGroupV1 deprecated
The ifSdh RS objects (R20.0).
.1.3.6.1.4.1.8708.2.52.1.1.2
ifSdhMsGroupV1 deprecated
The ifSdh MS objects (R20.0).
.1.3.6.1.4.1.8708.2.52.1.1.3
The ifSdh MS objects (R24.0).
.1.3.6.1.4.1.8708.2.52.1.1.4
The ifSdh RS objects (R24.0).
.1.3.6.1.4.1.8708.2.52.1.1.5
Compliance Statements (3)

OID .1.3.6.1.4.1.8708.2.52.1.2.1
Basic implementation requirements for the ifSdh MIB. (R20.0)
Required groups

OID .1.3.6.1.4.1.8708.2.52.1.2.2
Basic implementation requirements for the ifSdh MIB. (R24.0)
Required groups

OID .1.3.6.1.4.1.8708.2.52.1.2.3
Basic implementation requirements for the ifSdh MIB. (R24.0)
Required groups