LUM-IFPERF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
100

ifPerfAdminTable

table
.1.3.6.1.4.1.8708.2.56.2.2.1 · 1 row entry · 11 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifPerfAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFPERF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFPERF-MIB::ifPerfAdminTable' 
The  ifPerfAdmin performance group contains information and
configuration for all ifPerfAdmin performance objects.
ifPerfAdminEntry row .1.3.6.1.4.1.8708.2.56.2.2.1.1
An entry in the ifPerfAdmin list.
Indexes
Column Syntax OID
ifPerfAdminIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.56.2.2.1.1.1
ifPerfAdminName
The management name of the performance object,
for example 'lineAdmin:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameStringr/w
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.56.2.2.1.1.2
ifPerfAdminConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNAr/w
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.2.1.1.3
ifPerfAdminAdminStatus
The administrative state of the ifPerf interface.

down - The interface is de-activated.

service - The interface is activated.

up - The interface will be activated when
availa…
LUM-TCAdminStatusWithNAr/w
Type Values:
1down
2service
3up
2147483647notApplicable
Description:
The administrative state for an interface.

down - The interface should be inactive.

service - The board/interface is activated but
alarms are suppressed. Intended for use during
service or re-confi…
 .1.3.6.1.4.1.8708.2.56.2.2.1.1.4
ifPerfAdminReportMode
The performance reporting mode on the interface.

off - performance reporting is inactive.

on - performance reporting is activated.
LUM-TCOnOff
Type Values:
1off
2on
2147483646notAvailable
2147483647notApplicable
Description:
The configured laser mode.
notApplicable - used to tell that attribute
is not used in current configuration.
notAvailable - used to tell that it is not
possible to read attribute at the moment.
 .1.3.6.1.4.1.8708.2.56.2.2.1.1.5
ifPerfAdminOperStatus
The operational state for the interface.

notPresent - The interface is not available.

down - The interface is de-activated or there are
faults preventing its transition to the 'up' state.
…
LUM-TCOperStatusWithNA
Type Values:
1notPresent
2down
3up
2147483647notApplicable
Description:
The operational state for a interface.

notPresent - The interface is not available.

down - The interface is de-activated or
there are faults preventing it from going to the
'up'-state.

u…
 .1.3.6.1.4.1.8708.2.56.2.2.1.1.6
ifPerfAdminIsSuspect15m
This variable indicates if the performance data is
unreliable for the 15 minute interval. The 'isSuspect'
value is set to true if the interface has
been reconfigured or reset during the maintenance
operation. For exampl…
BooleanValueWithNA
Type Values:
1true
2false
2147483646notAvailable
2147483647notApplicable
Description:
Defines a value that can be true, false or not available

true - The condition is true

false - The condition is false

notAvailable (2147483646) is used when attribute is
not …
 .1.3.6.1.4.1.8708.2.56.2.2.1.1.7
ifPerfAdminIsSuspect24h
This variable indicates if the performance data is
unreliable for the 24 hour interval. The 'isSuspect'
value is set to true if the interface has
been reconfigured or reset during the maintenance
operation. For example …
BooleanValueWithNA
Type Values:
1true
2false
2147483646notAvailable
2147483647notApplicable
Description:
Defines a value that can be true, false or not available

true - The condition is true

false - The condition is false

notAvailable (2147483646) is used when attribute is
not …
 .1.3.6.1.4.1.8708.2.56.2.2.1.1.8
ifPerfAdminReset15m
Reset all 15 minute performance counters related to the same interface.
After a successful reset the default value
(normal) is restored in this attribute.
LUM-TCResetWithNA
Type Values:
1reset
2normal
2147483647notApplicable
Description:
When the attribute is set to reset the function is
re-initialised. Then the attribute is set to normal again
automatically.
reset - Re-initialises the function
normal - The function is in normal state
notApplicable - us…
 .1.3.6.1.4.1.8708.2.56.2.2.1.1.9
ifPerfAdminReset24h
Reset all 24 hour performance counters related to the same interface.
After a successful reset the default value
(normal) is restored in this attribute.

notApplicable (2147483647) is used when attribute i…
LUM-TCResetWithNA
Type Values:
1reset
2normal
2147483647notApplicable
Description:
When the attribute is set to reset the function is
re-initialised. Then the attribute is set to normal again
automatically.
reset - Re-initialises the function
normal - The function is in normal state
notApplicable - us…
 .1.3.6.1.4.1.8708.2.56.2.2.1.1.10
ifPerfAdminUpId
Identity in the UP for the Perf Admin entry
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.56.2.2.1.1.11

ifPerfFecTable

table
.1.3.6.1.4.1.8708.2.56.2.3.1 · 1 row entry · 13 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifPerfFecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFPERF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFPERF-MIB::ifPerfFecTable' 
The  ifPerfFec performance group contains information and
configuration for all ifPerfFec performance objects.
ifPerfFecEntry row .1.3.6.1.4.1.8708.2.56.2.3.1.1
An entry in the ifPerfFec list.
Indexes
Column Syntax OID
ifPerfFecIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.56.2.3.1.1.1
ifPerfFecName
The management name of the performance object,
for example 'lineFec:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameStringr/w
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.56.2.3.1.1.2
ifPerfFecConnIfPerfAdminIfIndex
An index that describes to which index in ifPerfAdminIf table
this object is related.
LUM-TCUnsigned32WithNAr/w
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.3.1.1.3
ifPerfFecCorrectedZeros
FEC counter. Number of corrected zeros.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.3.1.1.4
ifPerfFecCorrectedOnes
FEC counter. Number of corrected ones.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.3.1.1.5
ifPerfFecRxBerEstimation
Rx Bit Error Rate estimation.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.3.1.1.6
ifPerfFecRxAvgPreFecBer
Rx Average Pre FEC Bit Error Rate of PM interval.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.3.1.1.7
ifPerfFecCorrectedBits
FEC counter. Number of corrected bits.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.3.1.1.8
ifPerfFecRxBitErrorEstimation
Rx Bit Error Rate estimation.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.56.2.3.1.1.9
ifPerfFecOpticalSNR
Optical signal-to-noise ratio margin (dB/0.1nm) with respect to FEC cliff, based on calculation from rate of corrected bits.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.3.1.1.10
ifPerfFecUpId
Identity in the UP for the Perf Admin entry
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.56.2.3.1.1.11
ifPerfFecQMargin
Q factor margin (dB) with respect to the FEC threshold.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.3.1.1.12
ifPerfFecPreFecBer
Pre-FEC BER.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.56.2.3.1.1.13

ifPerfG826Table

table
.1.3.6.1.4.1.8708.2.56.2.4.1 · 1 row entry · 21 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifPerfG826Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFPERF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFPERF-MIB::ifPerfG826Table' 
The ifPerfG826 performance group contains information and
configuration for all ifPerfG826 performance objects. Notice table
is uni-directional meaning one entry for each direction.
ifPerfG826Entry row .1.3.6.1.4.1.8708.2.56.2.4.1.1
An entry in the ifPerfG826 list.
Indexes
Column Syntax OID
ifPerfG826Index
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.1
ifPerfG826Name
The management name of the performance object,
for example 'lineG826OtsOtu2SmUni15m:1:2:23-24',
where the textual part indicates the hierarchy and type
line/client
G826
OTS/OTUk/ODUk/OPUk/RS/MS/MAC/PCS etc or any combin…
LUM-TCMgmtNameStringr/w
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.2
ifPerfG826ConnIfPerfAdminIfIndex
An index that describes to which index in ifPerfAdminIf table
this object is related.
LUM-TCUnsigned32WithNAr/w
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.3
ifPerfG826Period
Period, 15 minute or 24 hour.
- 15 minute interval measurements per
measurement point

- 24 hour interval measurements per
measurement point
PerfPeriodWithNAr/w
Type Values:
1period15minutes
2period24hours
2147483647notApplicable
Description:
The period time for performance data.

period15minutes - 15 minutes
period24hours - 24 hours
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.4
ifPerfG826Type
The direction type of signal the interface expects.

rx - Only ingoing signal.

tx - Only outgoing signal.

uniDi - Unidirectional signal.

biDi - Ingoing and outg…
G826MeasurementTypeWithNAr/w
Type Values:
1rx
2tx
3uniDi
4biDi
2147483647notApplicable
Description:
The direction type.

rx - receiver, only ingoing signal
tx - transmitter, only outgoing signal
uniDi - unidirectional
biDi - bidirectional, ingoing and outgoing signal on the same port
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.5
ifPerfG826MonitorLevel
Monitor level, e.g. OPUk, ODUk, OTUk, RS, MS, MAC, PCS.
G826MonitorLevelWithNAr/w
Type Values:
1opu0
2odu0
3otu0
4opu1
5odu1
6otu1
7opu2
8odu2
9otu2
10opu3
11odu3
12otu3
13opu4
14odu4
15otu4
16oduFlex
17rs
18ms
19mac
20pcs
21cpriL1
22obsaiL1
23irsoh
24imsoh
25otuj2
26opuFlex
27otuj1
28flexo4
29flexo2
30openzrplus400
31openzrplus200
32opuc2
33oduc2
34otuc2
35opuc3
36oduc3
37otuc3
38opuc4
39oduc4
40otuc4
41oduc1i
42otuc1i
43oduc2i
44otuc2i
45oduc4i
46otuc4i
2147483647notApplicable
Description:
The monitor level.
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.6
ifPerfG826MonitorChannel
Monitor channel, e.g. SM, PM, TCM1-6.
G826MonitorChannelWithNAr/w
Type Values:
0unused
1sm
2pm
3tcm1
4tcm2
5tcm3
6tcm4
7tcm5
8tcm6
9faa
10psiBytes
2147483646notAvailable
2147483647notApplicable
Description:
The monitor channel.
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.7
ifPerfG826CounterEs
Errored Seconds.
The counter associated with the number of
errored seconds in the interval specified by the
period attribute.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.8
ifPerfG826CounterSes
Severely Errored Seconds.
The counter associated with the number of
severely errored seconds in the interval specified
by the period attribute.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.9
ifPerfG826CounterUas
Unavailable Seconds.
The counter associated with the number of
unavailable seconds in the interval specified
by the period attribute.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.10
ifPerfG826CounterBbe
Background Block Errors.
The counter associated with the number of
background block errors in the interval specified
by the period attribute.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.11
ifPerfG826ThresholdEs
Sets the threshold in seconds for the
errored seconds alarm.

Range 15m: 0 to 900 seconds
24h: 0 to 86400 seconds
LUM-TCUnsigned32WithNAr/w
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.12
ifPerfG826ThresholdSes
Sets the threshold in seconds for the
severely errored seconds alarm.

Range 15m: 0 to 900 seconds
24h: 0 to 86400 seconds
LUM-TCUnsigned32WithNAr/w
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.13
ifPerfG826ThresholdUas
Sets the threshold in seconds for the
unavailable seconds alarm.

Range 15m: 0 to 900 seconds
24h: 0 to 86400 seconds
LUM-TCUnsigned32WithNAr/w
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.14
ifPerfG826ThresholdBbe
Sets the threshold for the
background block errors alarms.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.15
ifPerfG826FaultStatusEs
Errored Seconds threshold exceeded.

alarm: The number of errors during a period
exceeds the associated threshold.

ok: The number of errored seconds during a
period is below the threshold.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.16
ifPerfG826FaultStatusSes
Severely Errored Seconds threshold exceeded.

alarm: The number of severely errored seconds
during a period exceeds the associated threshold.

ok: The number of severely errored seconds durin…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.17
ifPerfG826FaultStatusUas
Unavailable Seconds threshold exceeded.

alarm: The number of unavailable seconds during
a period exceeds the associated threshold.

ok: The number of unavailable seconds during a
period is b…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.18
ifPerfG826FaultStatusBbe
Background Block Errors threshold exceeded.

alarm: The number of background block errors
during a period exceeds the associated threshold.

ok: The number of background block errors during
a…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.19
ifPerfG826UpId
Identity in the UP for the Perf Admin entry
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.20
ifPerfG826TribPortId
Tributary port id that describes to which high-order
tributary port this object belong to.
LUM-TCTribPortIdType
Type Values:
0unused
1tp1
2tp2
3tp3
4tp4
5tp5
6tp6
7tp7
8tp8
9tp9
10tp10
11tp11
2147483647notApplicable
Description:
Tributary port ID.
 .1.3.6.1.4.1.8708.2.56.2.4.1.1.21

ifPerfL1Table

table
.1.3.6.1.4.1.8708.2.56.2.5.1 · 1 row entry · 8 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifPerfL1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFPERF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFPERF-MIB::ifPerfL1Table' 
The  ifPerfL1 performance group contains information and
configuration for all ifPerfL1 performance objects. Notice table
is uni-directional meaning one entry for each direction.
ifPerfL1Entry row .1.3.6.1.4.1.8708.2.56.2.5.1.1
An entry in the ifPerfL1 list.
Indexes
Column Syntax OID
ifPerfL1Index
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.56.2.5.1.1.1
ifPerfL1Name
The management name of the performance object,
for example 'clientL1Rx15m:1:2:1-2',
where the textual part indicates the type
line/client
L1
Rx/Tx/Uni/Bi direction type
15m/24h time period, 15 minutes or 24 hours
…
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.56.2.5.1.1.2
ifPerfL1ConnIfPerfAdminIfIndex
An index that describes to which index in ifPerfAdminIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.5.1.1.3
ifPerfL1Period
Period, 15 minute or 24 hour.
- 15 minute interval measurements per
measurement point

- 24 hour interval measurements per
measurement point
PerfPeriodWithNA
Type Values:
1period15minutes
2period24hours
2147483647notApplicable
Description:
The period time for performance data.

period15minutes - 15 minutes
period24hours - 24 hours
 .1.3.6.1.4.1.8708.2.56.2.5.1.1.4
ifPerfL1Type
The direction type of signal the interface expects.

rx - Only ingoing signal.

tx - Only outgoing signal.
L1MeasurementTypeWithNA
Type Values:
1rx
2tx
2147483647notApplicable
Description:
The direction type.

rx - receiver, only ingoing signal
tx - transmitter, only outgoing signal
 .1.3.6.1.4.1.8708.2.56.2.5.1.1.5
ifPerfL1MaxUtilization
The maximum bandwidth utilization of the received or
transmitted signal during a particular 15 minute or
24 hour interval.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.5.1.1.6
ifPerfL1AverageUtilization
The average bandwidth utilization of the received or
transmitted signal during a particular 15 minute or
24 hour interval.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.5.1.1.7
ifPerfL1CurrentUtilization
The Current bandwidth utilization of the received or
transmitted signal during a particular 15 minute or
24 hour interval.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.5.1.1.8

ifPerfL0Table

table
.1.3.6.1.4.1.8708.2.56.2.6.1 · 1 row entry · 12 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifPerfL0Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFPERF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFPERF-MIB::ifPerfL0Table' 
The  ifPerfL0 performance group contains information and
configuration for all ifPerfL0 performance objects.
ifPerfL0Entry row .1.3.6.1.4.1.8708.2.56.2.6.1.1
An entry in the ifPerfL0 list.
Indexes
Column Syntax OID
ifPerfL0Index
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.56.2.6.1.1.1
ifPerfL0Name
The management name of the performance object,
for example 'clientL0:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameStringr/w
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.56.2.6.1.1.2
ifPerfL0ConnIfPerfAdminIfIndex
An index that describes to which index in ifPerfAdminIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.6.1.1.3
ifPerfL0RxPower
Received power in units of 0.1 dBm.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.56.2.6.1.1.4
ifPerfL0TxPower
Transmitted power in units of 0.1 dBm.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.56.2.6.1.1.5
ifPerfL0InitialRxPower
Initial received power in units of 0.1 dBm.
The value is set using the install command.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.56.2.6.1.1.6
ifPerfL0ChromaticDispersion
Received chromatic dispersion that describe the spreading of a light
pulse as it travels down a fiber when light pulses launched close together.
LUM-TCSigned32WithNA
Type Constraints:
range: -2147483648..2147483647
Description:
A signed integer.

2147483646 used to tell that it is not
possible to read attribute at the moment.

2147483647 is used to indicate that the attri-
bute is not available currently
 .1.3.6.1.4.1.8708.2.56.2.6.1.1.7
ifPerfL0DifferentialGroupDelay
The arrival time difference between two polarization states at
the output of the media (fiber).
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.6.1.1.8
ifPerfL0InitialDifferentialGroupDelay
The initial received differential group delay in units of picoseconds.
The value is set using the install command.
LUM-TCUnsigned32WithNAr/w
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.6.1.1.9
ifPerfL0UpId
Identity in the UP for the Perf Admin entry
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.56.2.6.1.1.10
ifPerfL0OpticalSNR
OSNR of the received signal (dB/0.1nm) reported by the coherent module receiver.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.6.1.1.11
ifPerfL0QFactor
Pre-FEC Q factor (dB).
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.6.1.1.12

ifPerfL2StatTable

table
.1.3.6.1.4.1.8708.2.56.2.7.1 · 1 row entry · 13 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifPerfL2StatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFPERF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFPERF-MIB::ifPerfL2StatTable' 
The  ifPerfL2Stat performance group contains information and
configuration for all ifPerfL2Stat performance objects.
ifPerfL2StatEntry row .1.3.6.1.4.1.8708.2.56.2.7.1.1
An entry in the ifPerfL2Stat list.
Indexes
Column Syntax OID
ifPerfL2StatIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.56.2.7.1.1.1
ifPerfL2StatName
The management name of the performance object,
for example 'clientL2:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.56.2.7.1.1.2
ifPerfL2StatConnIfPerfAdminIfIndex
An index that describes to which index in ifPerfAdminIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.7.1.1.3
ifPerfL2StatPeriod
Period, 15 minute or 24 hour.
- 15 minute interval measurements per
measurement point

- 24 hour interval measurements per
measurement point
PerfPeriodWithNA
Type Values:
1period15minutes
2period24hours
2147483647notApplicable
Description:
The period time for performance data.

period15minutes - 15 minutes
period24hours - 24 hours
 .1.3.6.1.4.1.8708.2.56.2.7.1.1.4
ifPerfL2StatType
The direction type of signal the interface expects.

rx - Only ingoing signal.

tx - Only outgoing signal.
L2MeasurementTypeWithNA
Type Values:
1rx
2tx
2147483647notApplicable
Description:
The direction type.

rx - receiver, only ingoing signal
tx - transmitter, only outgoing signal
 .1.3.6.1.4.1.8708.2.56.2.7.1.1.5
ifPerfL2StatCurrentFrames
The amount of Ethernet frames during a particular interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.7.1.1.6
ifPerfL2StatCurrentBytes
The amount of bytes during a particular interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.7.1.1.7
ifPerfL2StatCurrentUnicastFrames
The amount of Ethernet unicast frames during a
particular interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.7.1.1.8
ifPerfL2StatCurrentMulticastFrames
The amount of Ethernet multicast frames during a
particular interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.7.1.1.9
ifPerfL2StatCurrentBroadcastFrames
The amount of Ethernet broadcast frames during a
particular interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.7.1.1.10
ifPerfL2StatMaxUtilization
The maximum bandwidth utilization of the received or
transmitted signal during a particular 15 minute or
24 hour interval.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.7.1.1.11
ifPerfL2StatAverageUtilization
The average bandwidth utilization of the received or
transmitted signal during a particular 15 minute or
24 hour interval.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.7.1.1.12
ifPerfL2StatCurrentUtilization
The Current bandwidth utilization of the received or
transmitted signal during a particular 15 minute or
24 hour interval.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.7.1.1.13

ifPerfL2ErrorTable

table
.1.3.6.1.4.1.8708.2.56.2.8.1 · 1 row entry · 17 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifPerfL2ErrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFPERF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFPERF-MIB::ifPerfL2ErrorTable' 
The  ifPerfL2Error performance group contains information and
configuration for all ifPerfL2Error performance objects.
ifPerfL2ErrorEntry row .1.3.6.1.4.1.8708.2.56.2.8.1.1
An entry in the ifPerfL2Error list.
Indexes
Column Syntax OID
ifPerfL2ErrorIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.1
ifPerfL2ErrorName
The management name of the performance object,
for example 'clientL2:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.2
ifPerfL2ErrorConnIfPerfAdminIfIndex
An index that describes to which index in ifPerfAdminIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.3
ifPerfL2ErrorPeriod
Period, 15 minute or 24 hour.
- 15 minute interval measurements per
measurement point

- 24 hour interval measurements per
measurement point
PerfPeriodWithNA
Type Values:
1period15minutes
2period24hours
2147483647notApplicable
Description:
The period time for performance data.

period15minutes - 15 minutes
period24hours - 24 hours
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.4
ifPerfL2ErrorType
The direction type of signal the interface expects.

rx - Only ingoing signal.

tx - Only outgoing signal.
L2MeasurementTypeWithNA
Type Values:
1rx
2tx
2147483647notApplicable
Description:
The direction type.

rx - receiver, only ingoing signal
tx - transmitter, only outgoing signal
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.5
ifPerfL2ErrorCurrentUndersizedFrames
The amount of undersized Ethernet frames during a
particular interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.6
ifPerfL2ErrorCurrentOversizedFrames
The amount of oversized Ethernet frames during a
particular interval.
Frames with a length over 9600 bytes are counted
as oversized frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.7
ifPerfL2ErrorCurrentFragments
The amount of fragmented Ethernet frames during a
particular interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.8
ifPerfL2ErrorCurrentFcsErrors
The amount of Ethernet frames with FCS or alignment
errors during a particular interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.9
ifPerfL2ErrorUndersizedFramesThreshold
Sets the threshold for the undersized frames alarm.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.10
ifPerfL2ErrorOversizedFramesThreshold
Sets the threshold for the oversized frames alarm.
A value 0 (zero) will disable the alarm.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.11
ifPerfL2ErrorFragmentsThreshold
Sets the threshold for the fragmented frames alarm.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.12
ifPerfL2ErrorFcsErrorsThreshold
Sets the threshold for the FCS errors alarm.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.13
ifPerfL2ErrorUndersizedFramesFault
Undersized frames threshold exceeded.

alarm: The number of undersized frames during a
period exceeds the associated threshold.

ok: At the start of a new period the associated
undersized fra…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.14
ifPerfL2ErrorOversizedFramesFault
Oversized frames threshold exceeded.

alarm: The number of oversized frames during a
period exceeds the associated threshold.

ok: At the start of a new period the associated
oversized frames…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.15
ifPerfL2ErrorFragmentsFault
Fragments threshold exceeded.

alarm: The number of fragmented frames during a
period exceeds the associated threshold.

ok: At the start of a new period the associated
fragmented frames coun…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.16
ifPerfL2ErrorFcsErrorsFault
FCS errors threshold exceeded.

alarm: The number of FCS or alignment errors during a
period exceeds the associated threshold.

ok: At the start of a new period the associated
FCS error count…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.56.2.8.1.1.17

ifPerfDelayTable

table
.1.3.6.1.4.1.8708.2.56.2.9.1 · 1 row entry · 5 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifPerfDelayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFPERF-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFPERF-MIB::ifPerfDelayTable' 
The Delay group group contains information and
configuration for the delay measurment of line ports.
ifPerfDelayEntry row .1.3.6.1.4.1.8708.2.56.2.9.1.1
An entry in the ifPerf Delay list.
Indexes
Column Syntax OID
ifPerfDelayIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.56.2.9.1.1.1
ifPerfDelayUId
An unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.56.2.9.1.1.2
ifPerfDelayName
The management name of the object,
for example 'delay:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.56.2.9.1.1.3
ifPerfDelayTwoWayFiberDelay
The measured delay in ns.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.9.1.1.4
ifPerfDelayConnIfPerfAdminIfIndex
An index that describes to which index in ifPerfAdminIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.56.2.9.1.1.5