LUM-ETH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

ethIfTable

table

.1.3.6.1.4.1.8708.2.18.2.2.1 · 1 row entry · 40 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk ethIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-ETH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-ETH-MIB::ethIfTable'

The interface list.

ethIfEntry row .1.3.6.1.4.1.8708.2.18.2.2.1.1

An entry in the interface list.

Indexes

ethIfIndex

Column Syntax OID

ethIfIndex

An arbitrary index assigned to each entry.

Unsigned32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.8708.2.18.2.2.1.1.1

ethIfName

The management name of the interface, for
example 'eth1:2:1', where the first number
indicates sub-rack, the second slot number and
the third is the port number.
Examples:

eth:s:s:p - Eth client interface

LUM-TCMgmtNameString

Type Constraints:
range: 0..255

Description:

An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.

.1.3.6.1.4.1.8708.2.18.2.2.1.1.2

ethIfDescr

User configurable label.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.8708.2.18.2.2.1.1.3

ethIfSubrack

The number of the subrack where the interface
is located.

LUM-TCSubrackNumber

Type Constraints:
range: 0..15

Description:

The number of a subrack within a network element.

0 signifies an undefined subrack number.

.1.3.6.1.4.1.8708.2.18.2.2.1.1.4

ethIfSlot

The number of the slot where the interface is
located.

LUM-TCSlotNumber

Type Constraints:
range: 0..22

Description:

The number of a slot within a subrack.

0 signifies an undefined slot number.

.1.3.6.1.4.1.8708.2.18.2.2.1.1.5

ethIfTxPort

The number of the port where the TX-side of
the interface is located.

LUM-TCPortNumber

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.18.2.2.1.1.6

ethIfRxPort

The number of the port where the RX-side of
the interface is located.

LUM-TCPortNumber

Type Constraints:
range: 0..116

Description:

The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.

.1.3.6.1.4.1.8708.2.18.2.2.1.1.7

ethIfInvPhysIndexOrZero

The row in the invPhysTable for this interface.
Set to 0 if not known.

Unsigned32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.8708.2.18.2.2.1.1.8

ethIfFormat

The expected signal format.

The default value is board dependent. For information
about the default value for this particular board,
please refer to the user manual.

EthSignalFormat

Type Values:

0	undefined
1	gbE
2	lan10GbE

.1.3.6.1.4.1.8708.2.18.2.2.1.1.9

ethIfHighSpeed

The expected signal bit rate in units of
1,000,000 bits (Mb) per second.

Unsigned32

Constraints:
range: 1000-10000

.1.3.6.1.4.1.8708.2.18.2.2.1.1.10

ethIfAdminStatus

The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…

LUM-TCBoardOrInterfaceAdminStatusr/w

Type Values:

1	down
2	service
3	up

Description:

The administrative state for a board or
interface.

down - The board/interface should be inactive.

service - The board/interface is activated but
alarms are suppressed. Intended for use during
servi…

.1.3.6.1.4.1.8708.2.18.2.2.1.1.11

ethIfOperStatus

The operational state for the interface.

notPresent - The physical resources are not
available.

down - The interface is de-activated or the are
faults preventing it from going to the
'up'-s…

LUM-TCBoardOrInterfaceOperStatus

Type Values:

1	notPresent
2	down
3	up

Description:

The operational state for a board or interface.

notPresent - The board/interface is not available.

down - The board/interface is de-activated or
there are faults preventing it from going to the
'up…

.1.3.6.1.4.1.8708.2.18.2.2.1.1.12

ethIfLaserStatus

The operational state of the laser.

off - The laser is turned off.

on - The laser is turned on.

Enumeration

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.8708.2.18.2.2.1.1.13

ethIfTxSignalStatus

The operational state for outgoing (TX) signal
of the interface.

down - A fault that would lead to a protection
switch has occurred.

degraded - The signal quality is impaired.
…

Enumeration

Enumerated Values:

1	down
2	degraded
3	up

.1.3.6.1.4.1.8708.2.18.2.2.1.1.14

ethIfAutoNegotiationMode

The wanted auto negotiation mode.

off - auto negotiation process is disabled

on - auto negotiation process is enabled

Enumerationr/w

Enumerated Values:

1	off
2	on

.1.3.6.1.4.1.8708.2.18.2.2.1.1.15

ethIfAutoNegotiationStatus

The result of the auto negotiation procedure

incomplete - the result is still pending

half - half duplex

full - full duplex

Enumeration

Enumerated Values:

1	incomplete
2	half
3	full

.1.3.6.1.4.1.8708.2.18.2.2.1.1.16

ethIfDuplexCapability

The duplex capability of the HW.

half - supports half duplex

full - supports full duplex

Enumeration

Enumerated Values:

2	half
3	full

.1.3.6.1.4.1.8708.2.18.2.2.1.1.17

ethIfFlowControlMode

The mode for handling of pause messages between
the peers.

noPause - PAUSE frame reception and
transmission is disabled

rxPause - PAUSE frame reception is enabled
(asymmetric)
…

Enumerationr/w

Enumerated Values:

1	noPause
2	rxPause
3	txPause
4	bothPause

.1.3.6.1.4.1.8708.2.18.2.2.1.1.18

ethIfInterPacketGap

Time between the frames in nano seconds.

Legal values are 72, 80, ... 200, 320, 328,
336, ... 456

Unsigned32r/w

Constraints:
range: 72-456

.1.3.6.1.4.1.8708.2.18.2.2.1.1.19

ethIfFrameSize

The maximum size of the transmitted and
received frames (in bytes).

Unsigned32r/w

Constraints:
range: 1518-9600

.1.3.6.1.4.1.8708.2.18.2.2.1.1.20

ethIfPowerLevel

The received power level in units of 0.1 dBm.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.8708.2.18.2.2.1.1.21

ethIfPowerLevelHighThresholddeprecated

The upper threshold for received power level
in units of 0.1 dBm.

Integer32r/w

Constraints:
range: -200--10

.1.3.6.1.4.1.8708.2.18.2.2.1.1.22

ethIfPowerLevelLowThresholddeprecated

The lower threshold for received power level
in units of 0.1 dBm.

Integer32r/w

Constraints:
range: -200--10

.1.3.6.1.4.1.8708.2.18.2.2.1.1.23

ethIfLaserBias

Measures laser bias current value in tenths
of mA (0.1 mA).

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.8708.2.18.2.2.1.1.24

ethIfLaserBiasThreshold

Sets the threshold for the laser bias alarm.
in percentage relative to the value set during
production. The preset value is 100%.

Unsigned32r/w

Constraints:
range: 0-300

.1.3.6.1.4.1.8708.2.18.2.2.1.1.25

ethIfLossOfSignal

Loss of signal.
Applicable for all signal formats.

A(ctivation): Active loss of signal HW
indication.

D(e-activation): Inactive loss of signal HW
indication.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…

.1.3.6.1.4.1.8708.2.18.2.2.1.1.26

ethIfReceivedPowerHigh

Received power level high threshold exceeded.

A: The received power level exceeds the
associated threshold.

D: The received power level is 0.5 dB below
the threshold.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.18.2.2.1.1.27

ethIfReceivedPowerLow

Received power level low threshold exceeded.

A: The received power level is below the
associated threshold.

D: The received power level is 0.5 dB above
the threshold.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.18.2.2.1.1.28

ethIfLaserBiasHigh

Laser bias high threshold exceeded.

A: The laser bias current exceeds the associated
threshold.

D: The laser bias current is 0.5 mA below the
associated threshold.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.18.2.2.1.1.29

ethIfLossOfSync

Loss of sync.

A: GbE 'frame' can not be located.

D: GbE 'frame' is located.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.18.2.2.1.1.30

ethIfBitrateMismatch

Bitrate mismatch.

A: The interface is unable to lock to the
inserted signal.

D: The interface is able to lock to the
inserted signal.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.18.2.2.1.1.31

ethIfLinkDown

A: Failure to negotiate a connection with the
other party.

D: A connection is negotiated.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.18.2.2.1.1.32

ethIfAuAlarmIndicationSignalW2C

Payload Alarm indication signal (AIS) on the
trunk-side.

A: An 'all ones' SDH signal is detected.

D: SDH signal recovered.

LUM-TCFaultStatus

Type Values:

1	ok
2	alarm

Description:

.1.3.6.1.4.1.8708.2.18.2.2.1.1.33

ethIfForwardAls

Forward Automatic Laser Shut-down. Decides
the behaviour of the client laser (W2C) when
the trunc signal is defected.

disabled - The laser is NOT turned off at
failure.

enabled - The laser …

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.8708.2.18.2.2.1.1.34

ethIfSuppressRemoteAlarms

Suppress AIS in the alarm list. The fault
status on the port object can, however, be seen.

disabled - alarms are not suppressed.

enabled - alarms are suppressed.

Enumerationr/w

Enumerated Values: