LIEBERT-GP-POWER-MIB Table View

This table contains a list of AC power measurement point entries.
The table contains zero, one, or many rows, depending upon the number
of power related measurement points available.  The NMS cannot
create or delete rows from the table. The rows are created by the
agent based upon the capabilities of the managed device.  Each row
in the table represents a series of measurements on a given point
or location within the system.  Measurement points/locations are
identified by the object identifier 'lgpPwrMeasurementPointId' in the
'LgpPwrMeasurementPointEntry' object.  The actual measurement being
taken at that identified point is identified by the other
corresponding columns in the LgpPwrMeasurementPointEntry for the
particular row of the table.

lgpPwrMeasurementPointEntry row .1.3.6.1.4.1.476.1.42.3.5.2.2.1

This entry defines the measurements to be populated in the
various columns of the 'lgpPwrMeasurementPointTable'.

Indexes

lgpPwrMeasurementPointIndex

Column	Syntax	OID
lgpPwrMeasurementPointIndex This is the index that indicates the row of the 'lgpPwrMeasurementPointTable' for a power measurement point.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.1
lgpPwrMeasurementPointId An OID representing a well known measurement point. These object identifiers indicate a point or location of power measurement in a power system. The OID's name usually implies a location of the measurement point such …	ObjectIdentifier	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.2
lgpPwrMeasurementPointNumLines The number of lines on the indicated power measurement point. (i.e. the number of phases on the power source being measured.)	CountSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.3
lgpPwrMeasurementPointNomVolts The magnitude of the nominal voltage on the power source being measured.	VoltSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.4
lgpPwrMeasurementPointNomFrequency The nominal or configured/expected frequency for the power source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable.	HertzSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.5
lgpPwrMeasurementPointFrequency The present (actual) frequency for the power source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable.	HertzSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.6
lgpPwrMeasurementPointApparentPower The present apparent AC power for the power source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable.	Volt-AmpSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.7
lgpPwrMeasurementPointTruePower The present AC power for the power source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable.	WattSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.8
lgpPwrMeasurementPointPowerFactor The present Power Factor for the power source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable.	.01 Power FactorSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.9
lgpPwrMeasurementPointWattHours The present number of Watt Hours for the power source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable.	Watt-HourSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.10
lgpPwrMeasurementPointVAPercent The percentage of the rated apparent AC power of the power source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable.	0.1 PercentSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.11
lgpPwrMeasurementPointNeutralCurrent The present neutral current of the power point indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable.	AmpSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.12
lgpPwrMeasurementPointGroundCurrent The present ground current of the power point indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable.	0.1 AmpSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.13
lgpPwrMeasurementPointNomCurrent The nominal or configured/expected current of the power point indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable.	0.1 AmpSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.14
lgpPwrMeasurementPointNomPowerFactor The nominal or configured/expected power factor of the power point indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable.	.01 Power FactorSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.15
lgpPwrMeasurementPointNomVA The nominal or configured/expected apparent AC power for the power source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable.	Volt-AmpSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.16
lgpPwrMeasurementPointNomW The nominal or configured/expected true AC power for the power source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable.	WattSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.17
lgpPwrMeasurementPointPowerFactorTag The present description of the Power Factor for the power source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. If Leading, the load is said to be capacitive and th…	Enumeration Enumerated Values: 1 leading 2 lagging	.1.3.6.1.4.1.476.1.42.3.5.2.2.1.19

A list of power measurements for each phase/line for a given
power measurement point/location in the 'lgpPwrMeasurementPointTable'.
The lgpPwrMeasurementPointIndex in this table corresponds to the
index in the lgpPwrMeasurementPointTable.
          
This table contains zero, one, or
many rows, depending upon the number of power line source objects
available.  The NMS cannot create or delete rows from the table.
The rows are created by the agent based upon the capabilities of
the managed device.

lgpPwrLineMeasurementEntry row .1.3.6.1.4.1.476.1.42.3.5.2.3.1

This entry defines the contents of the columns for the table
'lgpPwrLineMeasurementTable'.

Indexes

lgpPwrMeasurementPtIndex lgpPwrLineMeasurementIndex

Column	Syntax	OID
lgpPwrMeasurementPtIndex This is the index indicating the row of the table 'lgpPwrMeasurementPointTable' for a power measurement point.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.1
lgpPwrLineMeasurementIndex This is the index indicating the row of the table 'lgpPwrLineMeasurementTable' for a power measurement point.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.2
lgpPwrMeasurementPoint An OID representing a well known measurement point. These object identifiers indicate a point or location of power measurement in a power system. The OID name usually implies a location of the measurement point such as…	ObjectIdentifier	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.3
lgpPwrLineMeasurementVoltsLL The present Line-to-Line voltage measurement for the indicated source. The line being measured is given by the lgpPwrLineMeasurementIndex [1 = AB, 2 = BC, 3 = CA].	VoltSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.4
lgpPwrLineMeasurementVoltsLN The present Line-to-neutral voltage measurement for the indicated source. The line being measured is given by the lgpPwrLineMeasurementIndex where [1 = A, 2 = B, 3 = C].	VoltSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.5
lgpPwrLineMeasurementCurrent The present current measurement for the indicated source. The line being measured is given by the 'lgpPwrLineMeasurementIndex' where [1 = A, 2 = B, 3 = C].	AmpSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.6
lgpPwrLineMeasurementCapacity The percentage of the power capacity presently being used on this line.	percentSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.7
lgpPwrLineMeasurementVA The present apparent AC line power.	Volt-AmpSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.8
lgpPwrLineMeasurementTruePower The present AC line power measured in watts.	WattSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.9
lgpPwrLineMeasurementVoltageTHD The present total harmonic distortion on the AC line voltage.	0.1 PercentSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.10
lgpPwrLineMeasurementCurrentTHD The present total harmonic distortion on the AC line current.	0.1 PercentSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.11
lgpPwrLineMeasurementKFactorCurrent The present line K Factor.	0.1 K FactorSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.12
lgpPwrLineMeasurementCrestFactorCurrent The present crest factor of the line current.	0.1 Crest FactorSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.13
lgpPwrLineMeasurementPowerFactor The present Power Factor for the line.	0.01 Power FactorSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.14
lgpPwrLineMeasurementPowerFactorTag The present description of the Power Factor for the line. If Leading, the load is said to be capacitive and the phase of the current leads the voltage. If Lagging, the load is said to be inductive and the phase of the…	Enumeration Enumerated Values: 1 leading 2 lagging	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.15
lgpPwrLineMeasurementMaxVolts The maximum voltage measurement recorded for the indicated source since the command 'lgpPwrStatisticsReset' was executed.	VoltSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.16
lgpPwrLineMeasurementMinVolts The minimum voltage measurement recorded for the indicated source since the command 'lgpPwrStatisticsReset' was executed.	VoltSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.17
lgpPwrLineMeasurementVAR The present reactive AC line power of the power source indicated by 'lgpPwrMeasurementPoint'.	Volt-Amp-ReactiveSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.18
lgpPwrLineMeasurementPercentLoad The present percent load of the AC line power.	percentSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.19
lgpPwrLineMeasurementVolts The present voltage measurement for the indicated source.	VoltSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.20
lgpPwrLineMeasurementVACapacity The percentage of the apparent power capacity presently being used on this line.	percentSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.3.1.21

This table contains a list of DC power measurement point entries.
The table contains zero, one, or many rows, depending upon the number
of power related measurement points available.  The NMS cannot
create or delete rows from the table. The rows are created by the
agent based upon the capabilities of the managed device.  Each row
in the table represents a series of measurements on a given point
or location within the system.  Measurement points/locations are
identified by the object identifier 'lgpPwrDcMeasurementPointId' in the
'LgpPwrDcMeasurementPointEntry' object.  The actual measurement being
taken at that identified point is identified by the other
corresponding columns in the LgpPwrDcMeasurementPointEntry for the
particular row of the table.

lgpPwrDcMeasurementPointEntry row .1.3.6.1.4.1.476.1.42.3.5.2.4.1

This entry defines the measurements to be populated in the
various columns of the 'lgpPwrDcMeasurementPointTable'.

Indexes

lgpPwrDcMeasurementPointIndex

Column	Syntax	OID
lgpPwrDcMeasurementPointIndex This is the index that indicates the row of the 'lgpPwrMeasurementPointTable' for a power measurement point.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.476.1.42.3.5.2.4.1.1
lgpPwrDcMeasurementPointId An OID representing a well known measurement point. These object identifiers indicate a point or location of power measurement in a power system. The OID's name usually implies a location of the measurement point such …	ObjectIdentifier	.1.3.6.1.4.1.476.1.42.3.5.2.4.1.2
lgpPwrDcMeasurementPointSubID The identifier used to differentiate between identical thresholds for a given point index and point ID in the DC measurements table.	CountSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.4.1.3
lgpPwrDcMeasurementPointVolts The present DC voltage for the power source indicated by 'lgpPwrDcMeasurementPointId' in the corresponding row in the lgpPwrDcMeasurementPointTable.	VoltSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.4.1.4
lgpPwrDcMeasurementPointCurrent The present DC current for the power source indicated by 'lgpPwrDcMeasurementPointId' in the corresponding row in the lgpPwrDcMeasurementPointTable.	AmpSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.4.1.5
lgpPwrDcMeasurementPointNomVolts The nominal(configured/expected) DC voltage for the power source indicated by 'lgpPwrDcMeasurementPointId' in the corresponding row in the lgpPwrDcMeasurementPointTable.	VoltSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.4.1.6
lgpPwrDcMeasurementPointTruePower The present DC power for the power source indicated by 'lgpPwrDcMeasurementPointId' in the corresponding row in the lgpPwrDcMeasurementPointTable.	WattSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.2.4.1.7

A list of power thresholds for a given power measurement at a
point/location in the system.
The lgpPwrThresholdType in this table corresponds to the
type of measurement the high and low thresholds applies to.
          
This table contains zero, one, or many rows, depending upon the number
of 'lgpPwrThresholdPoint' and 'lgpPwrThresholdSubID' available in the
table.
The NMS cannot create or delete rows from the table.
The rows are created by the agent based upon the capabilities of
the managed device.

lgpPwrThresholdEntry row .1.3.6.1.4.1.476.1.42.3.5.4.7.1

This entry defines the contents of the columns for the table
'lgpPwrThresholdTable'.

Indexes

lgpPwrThresholdIndex

Column	Syntax	OID
lgpPwrThresholdIndex This is the index indicating the row of the table 'lgpPwrLineMeasurementTable' for a power measurement point.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.476.1.42.3.5.4.7.1.1
lgpPwrThresholdPoint An OID representing a well known measurement point. These object identifiers indicate a point or location of power measurement in a power system. The OID's name usually implies a location of the measurement point such …	ObjectIdentifier	.1.3.6.1.4.1.476.1.42.3.5.4.7.1.2
lgpPwrThresholdSubID This is a sub identifier for the 'lgpPwrThresholdPoint'. It indicates the instance number of the well known threshold point.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.476.1.42.3.5.4.7.1.3
lgpPwrThresholdType An OID representing a well known measurement type. These object identifiers indicate the type of measurement referenced by the row of the table. These object identifiers can encompass units of measure, lines of referen…	ObjectIdentifier	.1.3.6.1.4.1.476.1.42.3.5.4.7.1.4
lgpPwrThresholdHighWarning The high warning threshold of a type of measurement designated by the 'lgpPwrThresholdType' at a location designated by the 'lgpPwrThresholdPoint'. If multiple thresholds are available at a single 'lgpPwrThresholdPoint…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.4.7.1.5
lgpPwrThresholdHighFailure The high failure threshold of a type of measurement designated by the 'lgpPwrThresholdType' at a location designated by the 'lgpPwrThresholdPoint'. If multiple thresholds are available at a single 'lgpPwrThresholdPoint…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.4.7.1.6
lgpPwrThresholdLowWarning The low warning threshold of a type of measurement designated by the 'lgpPwrThresholdType' at a location designated by the 'lgpPwrThresholdPoint'. If multiple thresholds are available at a single 'lgpPwrThresholdPoint'…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.4.7.1.7
lgpPwrThresholdLowFailure The low failure threshold of a type of measurement designated by the 'lgpPwrThresholdType' at a location designated by the 'lgpPwrThresholdPoint'. If multiple thresholds are available at a single 'lgpPwrThresholdPoint'…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.476.1.42.3.5.4.7.1.8

A list of load circuits that can be controlled(opened or closed).
The NMS cannot create or delete rows from the table.
The rows are created by the agent based upon the capabilities of
the managed device.

lgpPwrLoadCircuitEntry row .1.3.6.1.4.1.476.1.42.3.5.6.2.1

This entry defines the contents of the columns for the table
'lgpPwrLoadCircuitTable'.

Indexes

lgpPwrLoadCircuitIndex

Column	Syntax	OID
lgpPwrLoadCircuitIndex This is the index indicating the row of the table 'lgpPwrLoadCircuitTable'.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.476.1.42.3.5.6.2.1.1
lgpPwrLoadCircuitId An OID representing a well known load circuit identifier. These load circuit identifiers indicate the name or type of load circuit reference in the table.	ObjectIdentifier	.1.3.6.1.4.1.476.1.42.3.5.6.2.1.2
lgpPwrLoadCircuitSubID This is a sub identifier for the 'lgpPwrLoadCircuitId'. It indicates the hardware identifier of the load control circuit.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.476.1.42.3.5.6.2.1.3
lgpPwrLoadCircuitState This identifier indicates the state of the load circuit. When read, only a closed or open response will be returned. When written to, the state of the circuit will transition to desired state.	Enumerationr/w Enumerated Values: 1 on 2 off 3 default	.1.3.6.1.4.1.476.1.42.3.5.6.2.1.4
lgpPwrLoadCircuitStateAndControl This identifier indicates the state of the load circuit. When read, only a closed or open response will be returned. When written to, the state of the circuit will transition to desired state.	Enumerationr/w Enumerated Values: 0 off 1 on 2 reboot	.1.3.6.1.4.1.476.1.42.3.5.6.2.1.5