LAN-EMULATION-BUS-MIB Table View

This table contains all LAN Emulation
Broadcast and Unknown Servers (BUS) this 
agent manages.  The BUS handles data sent
by an LE Client to the broadcast MAC
address, all multicast traffic, and initial unicast
frames which are sent by a LEC before the data
direct target ATM address has been resolved.
There can be multiple BUSs per ELAN, but a
BUS can service only one ELAN.

busConfEntry row .1.3.6.1.4.1.353.5.3.4.1.2.1

Each entry in this table represents a
BUS. The parameters in each entry apply
to one emulated LAN served by one BUS.
Object busRowStatus is required during
row creation and deletion. Object busElanName
is used to indi…

Indexes

busConfIndex

Column	Syntax	OID
busConfIndexmandatory A value which uniquely identifies a conceptual row in the busConfTable. If the conceptual row identified by this value of busConfIndex is recreated following an agent restart, the same value of busConfInd…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.4.1.2.1.1
busConfAtmAddrSpecmandatory An ATM address specified by the network or local management that, with the ATM address mask, determines a portion of the ATM address that the BUS on the designated ATM interface will use to derive the actu…	AtmLaneAddressr/w Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.4.1.2.1.2
busConfAtmAddrMaskmandatory The ATM address mask associated with the object busAtmAddrSpec. The value of the mask is an ATM address with the don't care portion set to zero and the valid ATM address portion set to one.	LAN-EMULATION-ELAN-MIBAtmLaneMaskr/w Type Constraints: range: 20	.1.3.6.1.4.1.353.5.3.4.1.2.1.3
busConfAtmAddrActualmandatory The resultant ATM address in use by the BUS. This object is a product of the specified ATM address, mask and interaction with the network. This object is created by the agent.	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.4.1.2.1.4
busConfElanNamemandatory The name of the ELAN this BUS is providing service to.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.353.5.3.4.1.2.1.5
busConfLastChangemandatory The value of the sysUpTime when this BUS has entered the state indicated by the object busConfOperStatus.	LAN-EMULATION-ELAN-MIBTIMESTAMP Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.3.4.1.2.1.6
busConfMaxFrameAgemandatory Time out period for a frame that has been received but not been transmitted by BUS to all relevant Multicast Send VCCs or Multicast Forward VCCs.	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.353.5.3.4.1.2.1.7
busConfOperStatusmandatory The operational state of this BUS entry. When in 'up' state the BUS will forward LEC traffic. Any other state the BUS is not available for service and may release all the existing VCCs and refuse service to all client…	Enumeration Enumerated Values: 1 other 2 up 3 down	.1.3.6.1.4.1.353.5.3.4.1.2.1.8
busConfAdminStatusmandatory The desired state of the designated BUS as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being reflected in the busOperStatus.	Enumerationr/w Enumerated Values: 2 up 3 down	.1.3.6.1.4.1.353.5.3.4.1.2.1.9
busConfRowStatusmandatory This object is used to create or delete entries in the busConfTable.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.4.1.2.1.10

This table contains all the Multicast Forward
VCCs used by the BUS to forward multicast traffic
to the participating LECs.  The Multicast Forward
VCC can either be point-to-point or point-to-
multipoint calls.  This table is read only if
SVCs are used and writable if PVCs are used.

busVccEntry row .1.3.6.1.4.1.353.5.3.4.1.3.1

Each entry in this table represents a
Multicast Forward VCC of the BUS.

Indexes

busConfIndex busVccAtmIfIndex busVccMtFwdVpi busVccMtFwdVci

Column	Syntax	OID
busVccAtmIfIndexmandatory The ATM interface which the Multicast Forward VCC is running on. This value must match an existing value in the ifTable. The value of this object is set to zero when the ATM interface is undefined.	LAN-EMULATION-ELAN-MIBIfIndexOrZero Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.3.4.1.3.1.1
busVccMtFwdVpimandatory The VPI value of the Multicast Forward VCC. The object busVccAtmIfIndex, busVccMtFwdVci and the value of this object uniquely identfies a VCC within a ATM host.	LAN-EMULATION-CLIENT-MIBVpiInteger Type Constraints: range: 0..255	.1.3.6.1.4.1.353.5.3.4.1.3.1.2
busVccMtFwdVcimandatory The VCI value of the Multicast Forward VCC. The object busVccAtmIfIndex, busVccMtFwdVpi and the value of this object uniquely identfies a VCC within a ATM host.	LAN-EMULATION-CLIENT-MIBVciInteger Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.3.4.1.3.1.3
busVccRowStatusmandatory This object is used to create or delete entries in the busConfTable.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.4.1.3.1.4

This table contains the BUS and the 
actual LECs being serviced by the BUS.
It can be used as the actual mapping
between BUS and LEC.
          
This table provides information
for Multicast send VCCs
between BUS and clients.  Objects
busLecMcastSendAtmIfIndex, busLecMcastSendVpi,
and busLecMcstSendVci can only be modified
if PVC is used.

busLecEntry row .1.3.6.1.4.1.353.5.3.4.1.5.1

Each entry represents a BUS to LEC
mapping.

Indexes

busConfIndex busLecAtmAddr

Column	Syntax	OID
busLecAtmAddrmandatory The ATM address of the LEC. This is the primary ATM address of the LEC.	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.4.1.5.1.1
busLecMcastSendAtmIfIndexmandatory The ATM interface index this BUS uses for Multicast Send traffic. The value of this object has to exist in the ifTable in MIB II unless an internal connection is used. When an internal connection is used, this obj…	LAN-EMULATION-ELAN-MIBIfIndexOrZeror/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.3.4.1.5.1.2
busLecMcastSendVpimandatory The virtual path identifier used to receive multicast traffic by this BUS.	LAN-EMULATION-CLIENT-MIBVpiIntegerr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.353.5.3.4.1.5.1.4
busLecMcastSendVcimandatory The virtual channel identifier used to receive multicast traffic by this BUS.	LAN-EMULATION-CLIENT-MIBVciIntegerr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.3.4.1.5.1.5
busLecRowStatusmandatory This object provides a way for the network manager to selectively remove a LE Client from the designated BUS. Or in a system where PVCs are used, this table is used to create Multicast Send VCCs between BUS and LEC.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.4.1.5.1.6

This table contains all counters the
BUS maintain.  This table is an extention
to the busConfTable.

busStatEntry row .1.3.6.1.4.1.353.5.3.4.2.1.1

Each entry in this table contains a
BUS and its counters.

Indexes

busConfIndex

Column	Syntax	OID
busStatInDiscardsmandatory The number of frames discarded due to resource error.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.4.2.1.1.1
busStatInOctetsmandatory The number of octets that this BUS has received since its initialization.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.4.2.1.1.2
busStatInUcastFrmsmandatory The number of frames that the BUS has received which were unicast data frames and all control frames (i.e. they were flooded from the client).	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.4.2.1.1.3
busStatInMcastFrmsmandatory The number of frames that the BUS has received which were multicast frames.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.4.2.1.1.4
busStatFrmTimeOutsmandatory The number of frames dropped by the BUS due to time out.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.4.2.1.1.5
busStatMcastSendRefusedmandatory The number of multicast send VCCconnection setup attempts to the BUS which were refused.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.4.2.1.1.6
busStatMcastFwdFailuremandatory The number of multicast forward VCCconnection setup attempts from the BUS which were unsuccessful for any reason.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.4.2.1.1.7

This table contains all LEC counters
the BUS maintains.  This table can also
be used to retrieve all LECs a BUS
is providing service to.

busLecStatEntry row .1.3.6.1.4.1.353.5.3.4.2.2.1

Each entry in this table represents a
LEC and its counters.

Indexes

busConfIndex busLecAtmAddr

Column	Syntax	OID
busLecRecvsmandatory Number of Multicast, Broadcast and Unknown Forward requests received by the BUS from this LEC.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.4.2.2.1.1
busLecForwardsmandatory Number of Multicast, Broadcast and Unkown Forward requests forwarded by the BUS from this LEC. The value of this object indicate how many requests have been forwarded by the BUS.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.4.2.2.1.2
busLecDiscardsmandatory Number of Multicast, Broadcast and Unkown Forward requests discarded by the BUS from this LEC. The value of this object indicate how many requests have been discarded by the BUS.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.4.2.2.1.3

This table contains error log control 
information of all BUS instances.
This table is an extention to the
busConfTable.  It is used to enable
or disable error logs for a particular
BUS entry.

busErrCtlEntry row .1.3.6.1.4.1.353.5.3.4.3.1.1

Each entry represents a BUS entry
in the busConfTable.

Indexes

busConfIndex

Column	Syntax	OID
busErrCtlAdminStatusmandatory This object is used to enable/disable error logging for the BUS.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.353.5.3.4.3.1.1.1
busErrCtlOperStatusmandatory This object is used to indicate the result of a set operation to the object busErrCtlAdminStatus. If the error log was successfully started, it is in active(2) mode. Otherwise, it is set to either outOfRes(3) or failed(…	Enumeration Enumerated Values: 1 other 2 active 3 outOfRes 4 failed 5 disabled	.1.3.6.1.4.1.353.5.3.4.3.1.1.2
busErrCtlClearLogmandatory This object is used to clear the error log entries associated with this BUS.	Enumerationr/w Enumerated Values: 1 noOp 2 clear	.1.3.6.1.4.1.353.5.3.4.3.1.1.3
busErrCtlMaxEntriesmandatory The maximum entries of the error log a BUS can support.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.353.5.3.4.3.1.1.4
busErrCtlLastEntrymandatory The index to the last entry in the error log table for this BUS.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.3.4.3.1.1.5

This table contains error logs
of the BUS instances enabled
in the busErrCtlTable.  This table
is indexed by the BUS instance
index and an arbitrary integer
uniquely identifies an error
log.

busErrLogEntry row .1.3.6.1.4.1.353.5.3.4.3.2.1

Each entry represents aan error detected by the BUS.

Indexes

busConfIndex busErrLogIndex

Column	Syntax	OID
busErrLogIndexmandatory An arbitrary integer which uniquely identifies an error log entry. The first entry after reset or clearing the error log is an assigned value (2^32-1). Succeding entries are assigned with descending values consecutive…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.3.4.3.2.1.1
busErrLogAtmAddrmandatory The primary ATM address of the LE Client on whose Multicast Send VCC the error occured. The corresponding error code is specified in the object busErrLogErrCode.	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.4.3.2.1.2
busErrLogErrCodemandatory The Error code which indicates the cause of the error.	Enumeration Enumerated Values: 1 outOfRes 2 badCtlFrame 3 badDataFrame 4 other	.1.3.6.1.4.1.353.5.3.4.3.2.1.3
busErrLogTimemandatory The sysUpTime when this entry was logged by the BUS.	LAN-EMULATION-ELAN-MIBTIMESTAMP Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.3.4.3.2.1.4