Juniper-V35-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
8
juniV35IfTable
table
.1.3.6.1.4.1.4874.2.2.59.1.2
·
1 row entry
·
8 columns
Uses the junose variant from
Command help
/opt/observium/mibs/junose.
Walk juniV35IfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-V35-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-V35-MIB::juniV35IfTable'
This table contains entries for X.21/V.35 interfaces present in the system. This table provides an extension to the Juniper-HDLC-MIB.juniHdlcIfTable for HDLC interfaces that support X.21/V.35 signalling.
Each entry describes the characteristics of an X.21/V.35 interface.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The ifIndex of the X.21/V.35 interface. It has the same value as the
juniHdlcIfIndex for the common interface. |
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.4874.2.2.59.1.2.1.1 |
||||||
|
Read only parameter of interface type X.21/V.35.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.4874.2.2.59.1.2.1.2 |
||||||
|
Read only parameter of interface mode of interface X.21/V.35 Data
Terminating Equipment(DTE)/Data Communication Equipment(DCE). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.4874.2.2.59.1.2.1.3 |
||||||
|
The clock rate setting in hertz for this X.21/V.35 interface. Only the
following values are valid: 1200, 2400, 4800, 9600, 19200, 38400, 56000, 64000, 128000, 1024000, 1536000, 2048000, 3072000, 4096000, 4915200, 61440… |
hertzSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.4874.2.2.59.1.2.1.4 |
||||||
|
The non-return-to-zero (NRZ) encoding for X.21/V.35 interface.
Inverted encoding is provided with NRZI-encoding command, which is non-return-to-zero inverted (NRZI) encoding. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.4874.2.2.59.1.2.1.5 |
||||||
|
There is an option of inverting the transmit clock signal for X.21/V.35
interface. Inverting the tranmit clock is used to compensate for skews between the clock and data when transmitting across long cables at fast dat… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.4874.2.2.59.1.2.1.6 |
||||||
|
When in X.21/V.35 DTE mode we have the capability of ignoring the DCD
signal in determining whether or not an interface is up. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.4874.2.2.59.1.2.1.7 |
||||||
|
Loopback interface is configured (or not) for X.21/V.35 interface
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.4874.2.2.59.1.2.1.8 |
