Juniper-DS3-MIB Table View

This table contains entries for DS3/E3 interfaces present in the
system.

juniDsx3ConfigEntry row .1.3.6.1.4.1.4874.2.2.4.1.1.1

Each entry describes the characteristics of an DS3/E3 interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
juniDsx3LineLength The length of the DS3/E3 line in meters. This objects provides information for line build out circuitry. This object is only useful if the interface has configurable line build out circuitry.	metersInteger32r/w Constraints: range: 0-137	.1.3.6.1.4.1.4874.2.2.4.1.1.1.1
juniDsx3LineType This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps and E3…	Enumerationr/w Enumerated Values: 1 juniDsx3other 2 juniDsx3M23 3 juniDsx3SYNTRAN 4 juniDsx3CbitParity 5 juniDsx3ClearChannel 6 juniE3G832 7 juniE3Framed 8 juniE3Plcp 18 juniDsx3M23Plcp 20 juniDsx3CbitParityPlcp	.1.3.6.1.4.1.4874.2.2.4.1.1.1.2
juniDsx3CellScramblerConfig This variable indicates the state of the ATM cell scrambler for interfaces which support ATM over DS3 or E3. For interfaces which do not support ATM, this object returns the value notSupported(3).	Enumerationr/w Enumerated Values: 1 scramblerOn 2 scramblerOff 3 notSupported	.1.3.6.1.4.1.4874.2.2.4.1.1.1.3
juniDsx3Channelization The channelization setting for this DS3 interface; true(1) indicates channelization, false(2) indicates no channelization.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4874.2.2.4.1.1.1.4
juniDsx3InterfaceType The DS3 interface type setting.	Enumerationr/w Enumerated Values: 0 ds3T3 1 ds3E3	.1.3.6.1.4.1.4874.2.2.4.1.1.1.5
juniDsx3Application The interface application setting.	Enumerationr/w Enumerated Values: 0 ds3FrameOverDs3 1 ds3AtmOverDs3	.1.3.6.1.4.1.4874.2.2.4.1.1.1.6
juniDsx3Ds3Channel The DS3 channel setting. The range of channel settings depends on the line rate of the underlying interface.	Integer32r/w Constraints: range: 1-28	.1.3.6.1.4.1.4874.2.2.4.1.1.1.7
juniDsx3LowerIfIndex The ifIndex of the interface over which this DS3 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4874.2.2.4.1.1.1.8
juniDsx3RowStatus Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support setting the following values only: createAndGo destroy To create an entry …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4874.2.2.4.1.1.1.9
juniDsx3Ds3DsuMode The DSU configuration setting for this entry.	Enumerationr/w Enumerated Values: 0 ds3DsuModeNone 2 ds3DsuLarsCom 4 ds3DsuDigitalLink	.1.3.6.1.4.1.4874.2.2.4.1.1.1.10
juniDsx3Ds3BandwidthLimit The DSU bandwidth configuration for this entry.	Integer32r/w Constraints: range: 0-44210	.1.3.6.1.4.1.4874.2.2.4.1.1.1.11
juniDsx3Ds3DsuScrambleMode The DSU scramble mode setting for this entry.	Enumerationr/w Enumerated Values: 0 ds3DsuScrambleDisabled 1 ds3DsuScrambleEnable	.1.3.6.1.4.1.4874.2.2.4.1.1.1.12
juniDsx3MdlCarrier Specifies the interface is used in carrier environment.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.4874.2.2.4.1.1.1.13
juniDsx3MdlTransmit Specifies transmission enabling.	Enumerationr/w Enumerated Values: 1 path 2 idlesignal 3 pathIdlesignal 4 testsignal 5 pathTestsignal 6 idlesignalTestsignal 7 pathIdlesignalTestsignal 8 none	.1.3.6.1.4.1.4874.2.2.4.1.1.1.14
juniDsx3MdlEic This is the equipment identification code.	OctetStringr/w Constraints: range: 0-10	.1.3.6.1.4.1.4874.2.2.4.1.1.1.15
juniDsx3MdlLic This is the location identification code.	OctetStringr/w Constraints: range: 0-11	.1.3.6.1.4.1.4874.2.2.4.1.1.1.16
juniDsx3MdlFic This is the frame identification code.	OctetStringr/w Constraints: range: 0-10	.1.3.6.1.4.1.4874.2.2.4.1.1.1.17
juniDsx3MdlUnit This is the unit identification code.	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.4874.2.2.4.1.1.1.18
juniDsx3MdlPfi This is the facility identification code to send in the MDL path message.	OctetStringr/w Constraints: range: 0-38	.1.3.6.1.4.1.4874.2.2.4.1.1.1.19
juniDsx3MdlPort This is the equipment port number to send in the MDL idle signal message.	OctetStringr/w Constraints: range: 0-38	.1.3.6.1.4.1.4874.2.2.4.1.1.1.20
juniDsx3MdlGenerator This is the generator number to send in the MDL test signal message.	OctetStringr/w Constraints: range: 0-38	.1.3.6.1.4.1.4874.2.2.4.1.1.1.21

This table contains entries for DS3/E3 interfaces present in the
system.

juniDsx3FarEndCurrentEntry row .1.3.6.1.4.1.4874.2.2.4.1.3.1

Each entry describes the characteristics of an DS3/E3 interface.

Indexes

No indexes recorded

Column	Syntax	OID
juniDsx3FarEndCurrentInvalidSeconds The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount	.1.3.6.1.4.1.4874.2.2.4.1.3.1.1

This table contains entries for DS3/E3 interfaces present in the
system.

juniDsx3FarEndIntervalEntry row .1.3.6.1.4.1.4874.2.2.4.1.4.1

Each entry describes the characteristics of an DS3/E3 interface.

Indexes

No indexes recorded

Column	Syntax	OID
juniDsx3FarEndIntervalInvalidSeconds The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in one of the previous 96 individual 15 minute intervals.	PerfHist-TC-MIBPerfIntervalCount	.1.3.6.1.4.1.4874.2.2.4.1.4.1.1

This table contains entries for DS3/E3 interfaces present in the
system.

juniDsx3FarEndTotalEntry row .1.3.6.1.4.1.4874.2.2.4.1.5.1

Each entry describes the characteristics of an DS3/E3 interface.

Indexes

No indexes recorded

Column	Syntax	OID
juniDsx3FarEndTotalInvalidSeconds The counter associated with the number of Invalid Seconds encountered by a DS3/E3 interface in the previous 24 hour interval.	PerfHist-TC-MIBPerfTotalCount	.1.3.6.1.4.1.4874.2.2.4.1.5.1.1

This table contains entries for DS3/E3 interfaces present in the
system.

juniDsx3FarEndConfigEntry row .1.3.6.1.4.1.4874.2.2.4.1.6.1

Each entry describes the far end configuration characteristics of an
DS3/E3 interface.

Indexes

No indexes recorded

Column	Syntax	OID
juniDsx3FarEndPortNumber This code identifies the port number of the Far End DS3. It is sent within the Idle Signal Message.	OctetStringr/w Constraints: range: 0-38	.1.3.6.1.4.1.4874.2.2.4.1.6.1.1
juniDsx3FarEndGeneratorNumber This code identifies the Far End DS3 Generator Number. It is sent within the Test Signal Message.	OctetStringr/w Constraints: range: 0-38	.1.3.6.1.4.1.4874.2.2.4.1.6.1.2
juniDsx3FarEndCarrier Specifies the interface is used in carrier environment. It is sent with MDL messages.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.4874.2.2.4.1.6.1.3